AM26S10C QUADRUPLE BUS TRANSCEIVERS SLLS116C - JANUARY 1977 - REVISED MARCH 1997 D D D D D D OR N PACKAGE (TOP VIEW) Schottky Circuitry for High Speed, Typical Propagation Delay Time . . . 12 ns Drivers Feature Open-Collector Outputs for Party-Line (Data Bus) Operation Driver Outputs Can Sink 100 mA at 0.8 V Maximum pnp Inputs for Minimal Input Loading Designed to Be Interchangeable With Advanced Micro Devices AM26S10 GND 1B 1R 1D 2D 2R 2B GND 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC 4B 4R 4D S 3D 3R 3B description The AM26S10C is a quadruple bus transceiver utilizing Schottky-diode-clamped transistors for high speed. The drivers feature open-collector outputs capable of sinking 100 mA at 0.8 V maximum. The driver and strobe inputs use pnp transistors to reduce the input loading. The driver of the AM26S10C is inverting and has two ground connections for improved ground current-handling capability. For proper operation, the ground pins should be tied together. The AM26S10C is characterized for operation over the temperature range of 0C to 70C. Function Tables AM26S10C (transmitting) INPUTS OUTPUTS S D B R L H L H L L H L AM26S10C (receiving) INPUTS S B D OUTPUT R H H X L H L X H H = high level, L = low level, X = irrelevant Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1997, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 AM26S10C QUADRUPLE BUS TRANSCEIVERS SLLS116C - JANUARY 1977 - REVISED MARCH 1997 logic symbol logic diagram (positive logic) AM26S10C S 12 AM26S10C S EN1 4 3 1R 5 2D 6 2R 11 3D 10 3R 13 4D 14 4R 1D 1 2 7 9 15 1B 2B 3B 4B These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 1D 1R 2D 2R 3D 3R 4D 4R 12 2 1B 4 3 7 5 2B 6 9 3B 11 10 15 4B 13 14 schematic (each transceiver) B VCC 110 NOM 2 k NOM V R D GND V 2.7 k NOM To Three Other Drivers S 2 POST OFFICE BOX 655303 To One Other Receiver * DALLAS, TEXAS 75265 To Two Other Receivers AM26S10C QUADRUPLE BUS TRANSCEIVERS SLLS116C - JANUARY 1977 - REVISED MARCH 1997 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.5 V to 7 V Driver or strobe input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.5 V to 5.5 V Bus voltage range, driver output off, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.5 V to 5.25 V Driver or strobe input current range, II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 30 mA to 5 mA Driver output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mA Receiver output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: All voltage values are with respect to network ground terminals connected together. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING D 950 mW 7.6 mW/C 608 mW N 1150 mW 9.2 mW/C 736 mW recommended operating conditions Supply voltage, VCC High levael input voltage High-levael voltage, VIH Low level input voltage, voltage VIL Low-level D or S MIN NOM MAX UNIT 4.75 5 5.25 V 2 B D or S 0.8 B 1.75 Driver 100 Receiver high-level output current, IOH Low level output current, Low-level current IOL V 2.25 -1 Receiver 20 Operating free-air temperature, TA 0 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 70 V mA mA C 3 AM26S10C QUADRUPLE BUS TRANSCEIVERS SLLS116C - JANUARY 1977 - REVISED MARCH 1997 electrical characteristics over recommended operating free-air temperature range PARAMETER TEST CONDITIONS VIK Input clamp voltage D or S VOH High-level output voltage R VCC = 4.75 V, VCC = 4.75 V, IOH = - 1 mA VIH = 2 V, VIL = 0.8 V, VIH = 2 V,, IOL = 20 mA IOL = 40 mA R VOH IO(off) ( ) Low level output voltage Low-level Off-stage output current IIH High level input current High-level II Input current at maximum input voltage IIL Low level input current Low-level IOS Short-circuit output current ICC Supply current VCC = 4.75 V,, VIL = 0.8 V B VIH = 2 V, V VIL = 0 0.8 8V B D S D or S D S R MIN TYP II = - 18 mA 2.7 MAX UNIT - 1.2 V 3.4 V 0.5 IOL = 70 mA IOL = 100 mA 0.33 0.5 0.42 0.7 0.51 0.8 VCC = 5.25 V, VCC = 5.25 V, VO = 0.8 V VO = 4.5 V - 50 VCC = 0, VO = 4.5 V 100 25 V VCC = 5 5.25 V, 7V VI = 2 2.7 VCC = 5.25 V, VI = 5.5 V 25 V VCC = 5 5.25 V, 4V VI = 0 0.4 100 30 20 100 - 0.54 - 0.36 VCC = 5.25 V - 18 VCC = 5.25 V,, Strobe at 0 V,, All driver outputs low - 60 45 No load,, V 70 80 A A A mA mA mA All typical values are at TA = 25C and VCC = 5 V. Not more than one output should be shorted to ground at a time, and duration of the short circuit should not exceed one second. switching characteristics, VCC = 5 V, TA = 25C PARAMETER tPLH tPHL Propagation delay time, low-to-high-level output tPLH tPHL Propagation delay time, low-to-high-level output tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL 4 Propagation delay time, high-to-low-level output Propagation delay time, high-to-low-level output Propagation delay time, high-to-low-level output FROM (INPUT) TO (OUTPUT) D B S B B R Transition time, low-to-high-level output TEST CONDITIONS AM26S10C MIN See Figure 1 TYP MAX 10 15 10 15 14 18 13 18 10 15 10 15 4 10 2 4 B Transition time, high-to-low-level output POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT ns ns ns ns AM26S10C QUADRUPLE BUS TRANSCEIVERS SLLS116C - JANUARY 1977 - REVISED MARCH 1997 PARAMETER MEASUREMENT INFORMATION VCC Pulse Generator (see Note A) 50 280 Driver Receiver See Note C 50 pF (see Note B) 15 pF (see Note B) Pulse Generator (see Note A) D S B R TEST CIRCUIT 3V 1.5 V Driver Input 3V 1.5 V 0V Strobe Input tPLH D to B tPHL D to B tPLH S to B tPHL S to B VOH 1.5 V VOL Bus tPHL B to R tPLH B to R tPHL B to R tPLH B to R VOH 1.5 V VOL Receiver Output VOLTAGE WAVEFORMS NOTES: A. The pulse generators have the following characteristics: ZO = 50 , tr = 10 5 ns. B. Includes probe and jig capacitance. C. All diodes are 1N916 or equivalent. Figure 1. Test Circuit and Voltage Waveforms POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 AM26S10C QUADRUPLE BUS TRANSCEIVERS SLLS116C - JANUARY 1977 - REVISED MARCH 1997 APPLICATION INFORMATION Strobe Driver Inputs Receiver Outputs D DD D 5V Strobe S R AM26S10C Driver Inputs Receiver Outputs D DD D R S R B B B R S R AM26S10C B B B B R R 5V R R B B B B R 100 100 100 100 100 100 100 100 100- Transmission Line Figure 2. Party-Line System 6 Receiver Outputs D DD D R AM26S10C R B Strobe Driver Inputs POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 18-Jul-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty AM26S10CD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26S10CDE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26S10CDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26S10CDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26S10CDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26S10CDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26S10CN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type AM26S10CNE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 19-Mar-2008 TAPE AND REEL INFORMATION *All dimensions are nominal Device AM26S10CDR Package Package Pins Type Drawing SOIC D 16 SPQ Reel Reel Diameter Width (mm) W1 (mm) 2500 330.0 16.4 Pack Materials-Page 1 A0 (mm) B0 (mm) K0 (mm) P1 (mm) 6.5 10.3 2.1 8.0 W Pin1 (mm) Quadrant 16.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 19-Mar-2008 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) AM26S10CDR SOIC D 16 2500 333.2 345.9 28.6 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated