6
6-1
.085 in. (2.16mm)
Density
Miniature Ribbon
Introduction
The Miniature Ribbon connector has been a mainstay in the electronics
industr y for decades. First widely used in telecommunications, it has proven
itself to be a very reliable interconnection system, with generous wiping action,
high contact pressure, large mating surface area in a relatively compact for-
mat, and polarized shells to ensure proper orientation in mating.
The Miniature Ribbon connector gets its name from the ribbon-like shape of
the mating end of the contact. It is a derivative of the first connector design to
incor porate this type of interconnection where mating members are equally
flexible. Each contact is backed up by its respective insulator, resulting in high
contact pressure without concern over relaxation that can occur with a beam
or cantilever design. Industr y standard sizes for this product are 14, 24, 36,
50, and 64 positions. Cinch adheres to industry-standard contact numbering
and mating geometr y.
Cinch has led the way in making the Miniature Ribbon connector one of the
most cost-effective yet high-quality connector systems in the industr y. From its
roots in the telecommunications industry where it is traditionally known as the
“Key Telephone” style connector (USOC Type RJ21), Cinch’s innovations in
termination, latching, and accessor ies have helped make the Miniature Ribbon
family the choice for applications in computers and instrumentation as well. It
is called out as the standard connector for a parallel printer interface (IEEE
1284-B, also known as “Centronics”), multi-pur pose peripheral interface
(SCSI-1), and instrumentation interface (IEEE-488, also know as “GPIB”).
Cinch manufactures one of the most diverse lines of Miniature Ribbon
products in the industr y. From SUPERIBBONTM all-plastic products with
solderless ter mination to full-metal shell products with solder ter minations,
and even filtered versions designed to solve EMI problems, Cinch can
provide the Miniature Ribbon products you need.
Several options are available so you can find the right Cinch Miniature Ribbon
product for your application. Cinch’s method of integrating
features into the product often
reduces overall installed cost compared to other
alternatives.
Select the termination type, the configuration, the
latching and mounting methods to be used, and any accessories that
would make the installation of the connector complete.
SUPERIBBON is a trademark of Cinch Connectors, Inc.Systems, Inc.
Connector Face Views
Call Toll Free: 1 (800) 323-9612
All-Plastic Metal Shell
6-6 6-14 IDC
6-24 Solder Cup
6-30 6-30 Wire Wrap
6-38 6-34 Ver tical-Mount Solder Tail
6-42 6-42 Ver tical-Mount Compliant Pin
6-46 Right Angle Solder Tail
6-48 Filtered Vertical-Mount Solder-Tail
6-48 Male/Female Adapter
Accessories information star ts on page 6-51.
Tooling Information star ts on pafe 6-54.
6-2
Call Toll Free: 1 (800) 323-9612
6
.085 in. (2.16mm)
Density
Miniature Ribbon
Introduction
Termination Options
Cinch offers products suitable for termination by various methods:
• IDC -- Cinch’s patented Insulation Displacement Contact (IDC) provides reliable,
low-cost termination to discrete wire, either loose or in jacketed cable. With the use
of special tools designed for field and/or factory use, wires can be terminated to the
connector without individual cutting, stripping, or solder ing. Reliable performance
is ensured by the exclusive 4-point contact ter mination, and the built-in wire strain
relief prevents mechanical stress from reaching the termination points.
Cinch IDC connectors are available in both Metal Shell and All-Plastic
SUPERIBBON versions. They are available to terminate solid conductor (some 22
AWG, and 24-26 AWG) or stranded (24-28 AWG) wire. Likewise, a full range of
termination tooling is available.
• Wire Wrap -- This termination style, which is also solderless, is often used when
termination must be done in place, such as in wired backplanes, etc. Cinch wire-
wrap terminated Miniature Ribbon connectors are available in both Metal Shell and
All-Plastic versions, with either .025" or .045" sq. tails.
• Solder Cup -- For those applications where nothing but the lowest ter mination
resistance will do, Cinch offers Metal Shell Miniature Ribbon connectors with
solder-cup termination. Available with or without insulator barriers between
contact terminal areas, these products will accept up to one 22 AWG solid wire
or one 24 AWG stranded wire per contact.
• Solder Tail -- This style allows Cinch Miniature Ribbon connectors to be through-
hole soldered directly to a printed circuit board.They are available in Ver tical Mount
and Right-Angle Mount versions.
• Compliant Pin -- This style allows termination to a printed circuit board without
soldering. This eliminates the costly cleaning/rework associated with soldering,
yet the Cinch modified-C type termination will not damage the board’s plating as
standard press-fit terminals can.
Configuration
Cinch Miniature Ribbon and SUPERIBBON products are available as connectors alone to
be mounted to a system’s panel or printed circuit board, or complete with hoods for use
on various types of cable assemblies. Hooded products are available with cable exits
straight back 180 degrees from the mating face (Top-Entr y) or with cable exits on either
end, 90, or 270 degrees from the mating face (Standard and Reverse Orientation End-
Entr y). Finally, overmold kits are available allowing you to efficiently and economically
manufacture your own “custom” cable assemblies.
End-Entr y SuperShieldTM connectors and All-Plastic SUPERIBBON connectors feature an
integral cable clamp that prevents stress on the termination area, even when the hood is
removed during assembly or repair.
Top-Entr y products have cable clamps built into the hoods. These clamps are adjustable
to fit a range of cable sizes.
Ter mination section of IDC contact
Piercing/compressing action as wire is
pressed into contact
SuperShield is a trademark of Cinch Connectors , Inc.
6-3
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Introduction
Latching Options
Miniature Ribbon and SUPERIBBON products exhibit a degree of self-locking inherent in
the contact design; however, additional locking means are recommended to prevent
connectors from being unmated inadvertently. Choices include:
• Screwlock Hardware -- the simplest connectors require the use of separate threaded
hardware to lock mating connectors together. Some Cinch Miniature Ribbon cable
connectors include locking screws; hardware for other configurations may be found
in the Accessories section of the Miniature Ribbon line.
Some panel-mount products are available with fixed female (internal thread)
screwlocks that provide an integral threaded screwlock as par t of the connector.
• Bail Latches -- as an alternative to screwlock hardware, Cinch offers many
configurations with industry-standard bail latches. These connectors have wire clips
on each end of the socket, and mating plugs have notched ends that these clips
snap into.
Bail latches offer the advantage of operating without any tools. Because of
this, they have been standardized into several applications, including “Centronics”
36-position parallel printer interface and SCSI-1 peripheral interface bus.
Bail latch sockets include standard “straight” latches, suitable for top entry
configurations. Special latches can be ordered to replace one standard latch to fit
under the cable on end entry mating plug assemblies.
• InstaLatchTM -- all Cinch SUPERIBBON all-plastic sockets and some metal shell
Miniature Ribbon sockets are available with a Cinch-patented latching system called
InstaLatch. In this passive latching system, spring clips at each end of the socket
automatically lock into windows in the shell of the mating plug securing the two
connectors together. Audible feedback confirms that the connectors are
indeed locked.
InstaLatches may be unlocked by depressing the latch at either end of the connector,
using almost any small, pointed-end tool. A special tool is also available to unlatch
InstaLatches when connectors are laid out in a tight arrangement.
• J-Hooks -- These devices, available on selected Miniature Ribbon products,
automatically lock onto the nose and hood of mating end entry connectors. They
are easily unlatched without special tools and are more accessible than other latches
in cer tain applications.
InstaLatch is a trademark of Cinch Connectors, Inc.
6-4
Call Toll Free: 1 (800) 323-9612
6
.085 in. (2.16mm)
Density
Miniature Ribbon
Introduction
Mounting Options
Var ious mounting options are available with Cinch Miniature Ribbon
and SUPERIBBON products:
• Through-Hole/Threaded Hole -- These products require separate hardware to mount
the connector to a panel or other component. Versions are available to accommodate
#3, #4, and in some cases, through #8 hardware.
Standard size cutouts are adequate for mounting panel-mount connectors to system
panels with this type of hardware. They may be front- or rear-mounted. (Sockets with
bail latches, however, must be front-mounted unless a modified cutout is used to clear
the latch retaining hardware.)
Metal Shell PC Mount products are available in some versions with standoffs to the
printed circuit board. These may be conductive or insulated.
Standard Panel Cutout Recommendations
Dimensions
Size A B C D A B C D
14 1.417 (35.99) 1.098 (27.89) .940 (23.88) .580 (14.73) 1.417 (35.99) 1.153 (29.29) .995 (25.27) .635 (16.13)
24 1.842 (46.79) 1.523 (38.68) 1.365 (34.67) .580 (14.73) 1.842 (46.79) 1.578 (40.08) 1.420 (36.07) .635 (16.13)
36 2.352 (59.74) 2.033 (51.64) 1.875 (47.63) .580 (14.73) 2.352 (59.74) 2.088 (53.04) 1.930 (49.02) .635 (16.13)
50 2.947 (74.85) 2.628 (66.75) 2.472 (62.79) .580 (14.73) 2.947 (74.85) 2.683 (68.15) 2.525 (64.14) .635 (16.13)
Plug or Fixed-Mount Socket Float-Mount Socket
• Panel Clips -- These devices are add-on accessories for All-Plastic products and are
available as optional configurations on cer tain Metal Shell products. They allow you to
mount the connector to the system panel without screws, nuts, or spacers, and leave
the connector’s mounting holes free for use in latching, if so desired.
• Boardlocks -- These devices, found on cer tain solder-tail PC mount products, fasten the
connector to the printed circuit board with solder as par t of the wave soldering process.
Thus, there is no additional labor required to complete the assembly, and a cost savings
can often be realized.
SUPERIBBON, Plug or Socket
Size A B C D
14 1.417 (35.99) 1.172 (29.77) .787 (19.99) .610 (15.49)
24 1.842 (46.79) 1.597 (40.56) 1.212 (30.78) .610 (15.49)
36 2.352 (59.74) 2.107 (53.52) 1.722 (43.74) .610 (15.49)
50 2.947 (74.85) 2.703 (68.66) 2.317 (58.85) .610 (15.49)
64 3.592 (91.24) 3.298 (83.77) 2.912 (73.96) .610 (15.49)
Rear Mounting Front Mounting
6-6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
FEATURES
■
Patented contact terminates Discrete Wire (loose or jacketed cable) without stripping or
soldering solid- and stranded-wire versions available.
■
All-plastic design reduces cost.
■
Available in plug and socket styles in 14, 24, 36, 50, and 64 position siz es.
■
Includes InstaLatch passive latch feature for automatic latching. Sockets are also available
without latches.
■
Available with .125" or #4-40 mounting holes. 50-position size plug also available to lock with
industry-standard Bail Latches.
■
Designed for panel mount, 180° (Top-Entry), or 90° (Standard) / 270° (Reverse) End-Entry
cable application.
■
I
ntegral Cable Clamp on End-Entry versions provides superior strain relief, even with
hood removed.
■
Full range of application tooling is available for termination, unlatching, etc. See pag e 6-54
for details.
■
UL Recognized - Files E170218 (UL1977), E130965 (UL1863).
■
CSA Approved - File LR31996-7.
IDC, SUPERIBBONTM
All-Plastic
MATERIALS
Insulator: Gray UL94V-0 rated glass-filled polyester, except where noted
Contact: Copper alloy
Contact Plating: select gold over 50µin. select nickel standard;
30µin. select gold over 50µin. select nickel available
where indicated
ENVIRONMENTAL
Operating T emperature: -40°C to +105°C
Shock: 50G Peak, per EIA Std. RS364, TP27, Condition A
Vibration: 3 cycles @ 10-55Hz in each of 3 axes per EIA Std. 364, TP28,
Condition A
Moisture Resistance: Per EIA Std. RS364, TP31, Condition B, with Step
7B excluded
ELECTRICAL
Voltage Rating: 500 VAC @ sea level; 125 VAC @ 70,000 ft.
Withstanding Voltage: 1200 VAC RMS @ sea level, per EIA Std. RS364, TP20
Contact Rating: 5 Amps (4 Amps per CSA)
Contact Resistance: 6 milliohms maximum, per EIA Std. RS364, TP6
Contact Resistance Change During Life Conditioning:
Resistance Change
Wire Size (milliohms, max.)
24 AWG Solid 0.5
26 AWG Solid 0.5
26 AWG Stranded 2.0
28 AWG Stranded 5.0
Insulation Resistance: 5000 Megohms minimum initial;
1000 Megohms minimum after moisture
6-7 Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC, SUPERIBBONTM
All-Plastic
Mechanical Characteristics
Durability: 200 mating/unmating cycles
Mating / Unmating Forces:
Termination: Solid IDC versions terminate 22 AWG - 26 AWG solid wire;
Stranded IDC versions ter minate 24 AWG - 28 AWG stranded wire;
Recommended Wire Insulation: soft PVC, .040" (1.02mm) max. OD
Wire Grip Strength (using recommended wire type):
Minimum Force
Wire Size Lb. Kg
24 AWG Solid 7 3.42
26 AWG Solid 5 2.44
26 AWG Stranded 5 2.44
Mating Force (max.) Unmating Force (min.)
with InstaLatches without InstaLatches
Size Lb. Kg Lb. Kg
14 12 5.44 2 0.91
24 17 7.71 4 1.81
36 23 10.43 6 2.72
50 32 14.52 7 3.18
64 37 16.78 8 3.63
6-8
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC, SUPERIBBONTM
All-Plastic
Panel Mount
Panel mount connectors provide signal I/O from a panel or system cabinet.
See pages 6-51 thru 6-53 for accessories such as wire restraints, panel clips, mounting screws, and dust covers
that make the use of Cinch SUPERIBBON connectors even more cost-effective in panel-mount applications.
Dimensions
AB D
Size in mm in mm in mm
14 1.745 44.32 1.417 35.99 0.738 18.75
24 2.170 55.12 1.842 46.79 1.163 29.54
36 2.680 68.07 2.352 59.74 1.673 42.49
50 3.275 83.19 2.947 74.85 2.268 57.61
64 3.875 98.43 3.542 89.97 2.863 72.72
Latch
6-9
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC, SUPERIBBONTM
All-Plastic
Ordering Information, Panel Mount
Plug, InstaLatching
Solid Wire
Mount Size Commercial 30Au/Ni
14 97-12140-11 97-12140-11A
24 97-12240-11 97-12240-11A
.125 Hole 36 97-12360-11 97-12360-11A
50 97-12500-11 97-12500-11A
64 97-12640-11 97-12640-11A
14 97-12140-01 97-12140-01A
24 97-12240-01 97-12240-01A
#4-40 Hole 36 97-12360-01 97-12360-01A
50 97-12500-01 97-12500-01A
64 97-12640-01 97-12640-01A
Socket
Solid Wire
Mount Size Commercial 30Au/Ni
14 97-22140-11 97-22140-11A
24 97-22240-11 97-22240-11A
.125 Hole 36 97-22360-11 97-22360-11A
50 97-22500-11 97-22500-11A
64 97-22640-11 97-22640-11A
14 97-22140-01 97-22140-01A
24 97-22240-01 97-22240-01A
#4-40 Hole 36 97-22360-01 97-22360-01A
50 97-22500-01 97-22500-01A
64 97-22640-01 97-22640-01A
14 97-22140-12 97-22140-12A
24 97-22240-12 97-22240-12A
.125 Hole 36 97-22360-12 97-22360-12A
50 97-22500-12 97-22500-12A
64 97-22640-12 97-22640-12A
14 97-22140-02 97-22140-02A
24 97-22240-02 97-22240-02A
#4-40 Hole 36 97-22360-02 97-22360-02A
50 97-22500-02 97-22500-02A
64 97-22640-02 97-22640-02A
InstaLatches
No Latches
180° (Top-Entry) Cable
6-10
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC, SUPERIBBONTM
All-Plastic
Snap-on plastic top-entr y hoods are available separately to
provide strain relief to a cable when one of the mounting/
latching options from page 6-9 fits your requirements. See
page 6-53 for details and ordering information for top-entry
all-plastic hoods.
For bail latching applications, a 50-position size top-entry
plug is available. It locks with industry-standard bail latches
for positive locking/unlocking without tools. It also locks with
InstaLatch latches for passive automatic latching.
For these products, insulator material is blue UL94V-0 rated
glass-filled polyester, and hood mater ial is gray UL94V-0
rated glass-filled polyester.
• The standard-orientation plug has the cable clamp on the position-1 end, and the
standard-orientation socket has the clamp on the high position end.
• Cables may be extended end-to-end (i.e.,
“
running cable”) by mating standard-
orientation plugs and sockets, or “doubled back” by mating a standard-orientation
connector with a reverse-orientation mate.
• Cables may exit either direction on a cable-to-panel application by choosing
standard or reverse-orientation, depending on the desired direction of cable exit.
• Pointed-nose versions of the standard-orientation, 50-position size are slightly
smaller than the square-end product and are suited to applications with limited
space such as bridging adapters, etc.
• #4-40 versions include screws that are 3/4" long, suitable for locking directly to
the body of another connector. For locking to connectors panel-mounted with
screwlock hardware, shor ter screws are required. See pages 6-51 thru 6-53 for
these and other accessories, such as dust covers.
Running Cable Application
Doubled-Back Cable Application
2.566(65.18)
90° (Standard) / 270° (Reverse) End-Entry Cable
End-Entr y connectors include a hood and integral cable clamp for cable exit
from the end
of the connector.
Ordering Information, 180° (Top-Entry) Cable Bail Latching Plug
Solid Wire
Large (.296") Cable Opening Small (.250") Cable Opening
Size Commercial 30Au/Ni Commercial 30Au/Ni
50 77-32500LP 77-32500LPA 77-32500SP 77-32500SPA
Ordering Information, Square End
Standard (90°) Orientation
Plug, InstaLatching Solid Wire
Mount Size Commercial 30Au/Ni
14 97-12140-90 97-12140-90A
24 97-12240-90 97-12240-90A
.125 Hole 36 97-12360-90 97-12360-90A
50 97-12500-90 97-12500-90A
64 97-12640-90 97-12640-90A
14 97-12140-91 97-12140-91A
24 97-12240-91 97-12240-91A
#4-40 Hole 36 97-12360-91 97-12360-91A
with Screw 50 97-12500-91 97-12500-91A
64 97-12640-91 97-12640-91A
Socket Solid Wire
Latch Mount Size Commercial 30Au/Ni
14 97-22140-90 97-22140-90A
24 97-22240-90 97-22240-90A
.125 Hole 36 97-22360-90 97-22360-90A
50 97-22500-90 97-22500-90A
64 97-22640-90 97-22640-90A
14 97-22140-91 97-22140-91A
24 97-22240-91 97-22240-91A
#4-40 Hole 36 97-22360-91 97-22360-91A
with Screw 50 97-22500-91 97-22500-91A
64 97-22640-91 97-22640-91A
14 97-22140-92 97-22140-92A
24 97-22240-92 97-22240-92A
.125 Hole 36 97-22360-92 97-22360-92A
50 97-22500-92 97-22500-92A
64 97-22640-92 97-22640-92A
14 97-22140-93 97-22140-93A
24 97-22240-93 97-22240-93A
#4-40 Hole 36 97-22360-93 97-22360-93A
with Screw 50 97-22500-93 97-22500-93A
64 97-22640-93 97-22640-93A
6-11
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC, SUPERIBBONTM
All-Plastic
Dimensions, Square End
AB
Size in mm in mm
14 2.114 53.70 1.417 35.99
24 2.539 64.49 1.842 46.79
36 3.049 77.44 2.352 59.74
50 3.677 93.40 2.947 74.85
64 4.511 114.58 3.542 89.97
InstaLatches
No Latches
Plug
Socket
6-12
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC, SUPERIBBONTM
All-Plastic
Ordering Information, Square End (Cont’d)
Reverse (270°) Orientation
Solid Wire
Mount Size Commercial 30Au/Ni
14 97-12140-270 97-12140-270A
24 97-12240-270 97-12240-270A
.125 Hole 36 97-12360-270 97-12360-270A
50 97-12500-270 97-12500-270A
64 97-12640-270 97-12640-270A
14 97-12140-271 97-12140-271A
24 97-12240-271 97-12240-271A
#4-40 Hole 36 97-12360-271 97-12360-271A
with Screw 50 97-12500-271 97-12500-271A
64 97-12640-271 97-12640-271A
Socket
Solid Wire
Latch Mount Size Commercial 30Au/Ni
14 97-22140-270 97-22140-270A
24 97-22240-270 97-22240-270A
.125 Hole 36 97-22360-270 97-22360-270A
50 97-22500-270 97-22500-270A
64 97-22640-270 97-22640-270A
14 97-22140-271 97-22140-271A
24 97-22240-271 97-22240-271A
#4-40 Hole 36 97-22360-271 97-22360-271A
with Screw 50 97-22500-271 97-22500-271A
64 97-22640-271 97-22640-271A
14 97-22140-272 97-22140-272A
24 97-22240-272 97-22240-272A
.125 Hole 36 97-22360-272 97-22360-272A
50 97-22500-272 97-22500-272A
64 97-22640-272 97-22640-272A
14 97-22140-273 97-22140-273A
24 97-22240-273 97-22240-273A
#4-40 Hole 36 97-22360-273 97-22360-273A
with Screw 50 97-22500-273 97-22500-273A
64 97-22640-273 97-22640-273A
InstaLatchesNo Latches
Plug, InstaLatching
6-13
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC, SUPERIBBONTM
All-Plastic
Solid Wire
#4-40 Threaded Hole with Screw
Commercial 30Au/Ni
Plug, InstaLatching
With Dust Cover 97-12500-91PD 97-12500-91PDA
Without Dust Cover 97-12500-91P 97-12500-91PA
Socket, InstaLatching
With Dust Cover 97-22500-91PD 97-22500-91PDA
Without Dust Cover 97-22500-91P 97-22500-91PA
Socket, No Latches
With Dust Cover 97-22500-93PD 97-22500-93PDA
Without Dust Cover 97-22500-93P 97-22500-93PA
Ordering Information, Pointed-End
Pointed-End 50-Position 90° End-Entry Cable
6-14
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
FEATURES
■
Patented contact terminates Discrete Wire (loose or jacketed cable) without stripping or
soldering. Solid and stranded wire versions available.
■
Metal shell provides grounding and shielding capability.
■
Available in plug and socket styles in 14, 24, 36, and 50 position sizes.
■
Designed for panel mount, 180° (Top-Entr y), or 90° (Standard) / 270° (Reverse) End-Entry
cable applications.
■
Available as overmold kit in 36 and 50 position sizes.
■
All Plugs lock with InstaLatch passive latch feature for automatic latching.
Sockets available with InstaLatches where indicated.
■
I
ndustry-standard bail latch feature available for locking/unlocking without tools in applications
such as SCSI-1 and Centronics.
■
Full range of application tooling available for termination, unlatching, etc. See page 6-54
for details.
■
UL Recognized - Files E170218 (UL1977), E130965 (UL1863).
■
CSA Approved - File LR31996-7
.
IDC
Metal Shell
MATERIALS
Insulator: Blue UL94V-0 rated glass-filled polyester
Contact: Copper alloy
Contact Plating: Select gold over 50µin. select nickel standard;
30µin. select gold over 50µin. select nickel available
where indicated
Shell: Steel
Shell Plating: Zinc with clear chromate coating standard
Tin available where indicated
ENVIRONMENTAL
Operating T emperature: -40°C to +105°C
Shock: 50G Peak, per EIA Std. RS364, TP27, Condition A
Vibration: 3 cycles @ 10-55Hz in each of 3 axes per EIA Std. 364, TP28,
Condition A
Moisture Resistance: Per EIA Std. RS364, TP31, Condition B, with Step
7B excluded
ELECTRICAL
Voltage Rating: 500 VAC @ sea level; 125 VAC @ 70,000 ft.
Withstanding Voltage: 1200 VAC RMS @ sea level, per EIA Std.
RS364, TP20
Contact Rating: 5 Amps (4 Amps per CSA)
Contact Resistance: 6 milliohms maximum, per EIA Std. RS364, TP6
Contact Resistance Change During Life Conditioning:
Resistance Change
Wire Size (milliohms, max.)
24 AWG Solid 0.5
26 AWG Solid 0.5
26 AWG Stranded 2.0
28 AWG Stranded 5.0
Insulation Resistance: 5000 Megohms minimum initial;
1000 Megohms minimum after moisture
6-15 Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC
Metal Shell
Mechanical Characteristics
Durability: 200 mating/unmating cycles
Mating / Unmating Forces:
Mating Force (max.) Unmating Force (min.)
with InstaLatches without InstaLatches
Size Lb. Kg Lb. Kg
14 12 5.44 2 0.91
24 17 7.71 4 1.81
36 23 10.43 6 2.72
50 32 14.52 7 3.18
Termination: Solid IDC versions terminate 22 AWG - 26 AWG solid wire;
Stranded IDC versions ter minate 24 AWG - 28 AWG stranded
wire; Recommended Wire Insulation: soft PVC, .040"
(1.02mm) max. OD
Wire Grip Strength (using recommended wire type):
Min. Force
Wire Size Lb. Kg
24 AWG Solid 7 3.42
26 AWG Solid 5 2.44
26 AWG Stranded 5 2.44
6-16
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC
Metal Shell
Panel Mount
“Panel mount” products are connectors without hoods.They are typically used to provide signal I/O from a system panel or
cabinet, where strain relief to a cable jacket is not required.
• Standard versions have .103" mounting holes (sockets have .103" with float bushings) for use with #3 hardware,
or with .185" mounting holes for use with #8 hardware.
• Select sizes are available with .120" or .113" mounting holes for use with #4 hardware, or with integral panel
clips, which allow snap-in front mounting on .093" thick panels for more cost-effective assembly.
• Bail latching sockets are available, as are bail latching plugs.While the plugs would not be panel-mounted,
they are available for premold/solder over molding applications.
• SuperShield products include modified shells that assure interference fit between mated connectors
for improved shielding performance.
See page 6-4 for recommended standard panel cutout dimensions.
See pages 6-51 thru 6-52 for accessories such as wire restraints, mounting screws, and dust covers, which make the use of
Cinch Miniature Ribbon connectors even more cost-effective in panel-mount applications.
See the appropriate cable connector section that follows for products that include hoods for exposed-cable applications.
Dimensions
AB C D
Size in mm in mm in mm in mm
14 1.750 44.45 1.417 35.99 0.910 23.11 - -
24 2.175 55.25 1.842 46.79 1.335 33.91 - -
36 2.685 68.20 2.352 59.74 1.845 46.86 2.426 61.62
50 3.280 83.31 2.947 74.85 2.440 61.98 3.020 76.71
A Max.
B Max. A Max.
B Max.
Socket
Plug
6-17
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC
Metal Shell
Ordering Information, Panel Mount
Plug, InstaLatching
Solid Wire
Mount Size Commercial 30Au/Ni
14 77-12140 77-12140A
.103 Hole 24 77-12240 77-12240A
36 77-12360 77-12360A
50 77-12500 77-12500A
.103 Hole 24 77-12240-32 77-12240-32A
Tin-Plated Shells 36 77-12360-32 77-12360-32A
50 77-12500-32 77-12500-32A
14 77-12140-185 77-12140-185A
.185 Hole 24 77-12240-185 77-12240-185A
36 77-12360-185 77-12360-185A
50 77-12500-185 77-12500-185A
.185 Hole 24 77-12240-186 77-12240-186A
Tin-Plated Shells 36 77-12360-186 77-12360-186A
50 77-12500-186 77-12500-186A
.120 Hole 50 77-12500-120 77-12500-120A
.120 Hole, Tin-Plated Shells 50 77-12500-121 77-12500-121A
SuperShield, .133 Hole 50 77-12500-SH 77-12500-SHA
Bail Latching 36 77-12360-5 77-12360-5A
Tin-Plated Shells 50 77-12500-10 77-12500-10A
.103 Hole 50 77-12500-41 77-12500-41A
Fixed 4-40 Screwlock 50 77-12500-43 77-12500-43A
SuperShield, .103 Hole 50 77-12500-SC 77-12500-SCA
*Integral Panel Clips, for front-mount only, require modified panel cutout. See page 6-52 for details.
* Integral
Panel
Clips
Through Hole Bail Latching
Integral Panel Clip
“C” Max.
“D” Ref.
Socket Solid Wire
Mount Size Commercial 30Au/Ni
14 77-22140 77-22140A
Float Mounts with 24 77-22240 77-22240A
.103 Hole 36 77-22360 77-22360A
50 77-22500 77-22500A
.103 Hole 24 77-22240-34 77-22240-34A
Tin-Plated Shells 36 77-22360-34 77-22360-34A
50 77-22500-34 77-22500-34A
14 77-22140-185 77-22140-185A
.185 Hole 24 77-22240-185 77-22240-185A
36 77-22360-185 77-22360-185A
50 77-22500-185 77-22500-185A
.185 Hole 24 77-22240-186 77-22240-186A
Tin-Plated Shells 36 77-22360-186 77-22360-186A
50 77-22500-186 77-22500-186A
.120 Hole 50 77-22500-120 77-22500-120A
Integral Panel Clips*, .103 Hole 50 77-22500-41 77-22500-41A
Integral Panel Clips*
Fixed 4-40 Screwlocks 50 77-22500-43 77-22500-43A
14 77-42140 77-42140A
.116 Hole 24 77-42240 77-42240A
36 77-42360 77-42360A
50 77-42500 77-42500A
.116 Hole with 36 77-42360-5 77-42360-5A
Tin-Plated Shell 50 77-42500-5 77-42500-5A
.103 Hole
Tin-Plated Shell 50 77- 22500-36 77- 22500-36A
.113 Hole
Tin-Plated Shell 50 77-22500-38 77-22500-38A
SuperShield, .103 Hole with
Integral Panel Clips* 50 77-22500-SC 77-22500-SCA
*
Integral Panel Clips, for front-mount only, require modified panel cutout.
See page 6-52 for details.
6-18
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC
Metal Shell
No LatchesInstaLatches Bail Latches
Ordering Information, Panel Mount (Cont’d)
Through Hole
Bail Latching
Float Mount
6-19
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC
Metal Shell
180° (Top-Entry) Cable
Top-Entr y products include a connector, hood (or over mold can), and associated hardware.
They are typically used at the end of a cable, where it is subject to physical strain and protection of the termination
area is required.
• Includes all hardware required to attach hood to connector.
• Bail latching sockets have latch hardware integral to the connector body, making cable assembly more efficient.
• Bail latching plugs include notches that lock with industry-standard bail-latch sockets.
• Select configurations are available as overmold kits, which lower assembly costs by eliminating premolding and foil
soldering. Kits include connector and overmold cans. Crimp ferrules, which ground cable shields and provide strain relief,
must be ordered separately.
• Ordering information for crimp ferrules is at end of end-entr y product section. See page 6-22.
Dimensions
ABCDEFGHM
Size in mm in mm in mm in mm in mm Deg. in mm in mm in mm
14 1.417 35.99 1.750 44.45 .306 7.77 1.495 37.97 - - - .422 10.72 .843 21.41 - -
24 1.842 46.79 2.175 55.25 .473 11.10 1.920 48.77 - - - .473 12.01 .825 20.96 - -
36 2.352 59.74 2.685 68.20 .639 16.23 2.431 61.75 1.83 46.48 37° .473 12.01 .905 22.99 .52 13.21
50 2.947 74.85 3.270 83.06 .766 19.46 3.025 76.84 2.43 61.72 27° .473 12.01 .995 25.27 .60 15.24
C
H
Plug
Socket
6-20
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC
Metal Shell
Ordering Information, 180° (Top-Entry) Cable
Plug, InstaLatching
Solid Wire
Mount Size Commercial 30Au/Ni
14 77-32140 77-32140A
Bail Latching 24 77-32240 77-32240A
36 77-32360 77-32360A
50 77-32500 77-32500A
Captive 4-40 Screws 50 77-32500-30 77-32500-30A
Bail Latching, 36 77-32360-51 77-32360-51A
Tin Shell 50 77-32500-51 77-32500-51A
.103 Hole, Tin Shell 36 77-32360-52 77-32360-52A
50 77-32500-52 77-32500-52A
Socket
Solid Wire
Mount Size Commercial 30Au/Ni
14 77-62140 77-62140A
With Bail Latches 24 77-62240 77-62240A
36 77-62360 77-62360A
50 77-62500 77-62500A
.103 Hole,
Tin-Plated Shells 50 77-62500-54 77-62500-54A
.113 Hole,
Tin-Plated Shells 50 77-62500-55 77-62500-55A
Overmold
kit
Overmold kit
InstaLatch
Ordering Information, End-Entr y
Standard (90°) Orientation Solid Wire
Mount Size Commercial 30Au/Ni
High (Standard) Hood 50 77-72500 77-72500A
Low-Profile Hood 50 77-72500-1 77-72500-1A
SuperShield, 4-40 Screw 50 77-72500-SS 77-72500-SSA
High (Standard) Hood 50 77-82500 77-82500A
Low-Profile Hood 50 77-82500-1 77-82500-1A
SuperShield, 4-40 Screw 50 77-82500-SS 77-82500-SSA
Reverse (270°) Orientation Solid Wire
Mount Size Commercial 30Au/Ni
High (Standard) Hood 50 77-72500-270 77-72500-270A
Low-Profile Hood 50 77-72500-271 77-72500-271A
High (Standard) Hood 50 77-82500-270 77-82500-270A
Low-Profile Hood 50 77-82500-271 77-82500-271A
6-21
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC
Metal Shell
90° (Standard) / 270° (Reverse) End-Entry Cable
End-Entr y connectors, available in 50 position size only, include a hood and integral cable clamp for cable exit from the
end of the connector.
• The standard-orientation plug has the cable clamp on the position 1/26 end,
and the standard-orientation socket has the clamp on the position 25/50 end.
• Cables may be extended end-to-end (i.e., “running cable”) by mating standard-
orientation plugs and sockets, or “doubled back” by mating a standard-
orientation connector with a reverse-orientation mate.
• Cables may exit either direction on a cable-to-panel application by choosing
standard or reverse-orientation, depending on the desired direction of
cable exit.
• Include screw that is 5/8" long, suitable for locking directly to the body of
another connector. For locking to connectors panel-mounted with screwlock
hardware, shor ter screws are required. See page 6-51 for these and other
accessories, such as dust covers.
Plug
Socket
no latches
Plug
Socket
no
latches
Running Cable Application
Double-Back Cable Application
6-22
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
IDC
Metal Shell
Overmold Crimp Ferrules
• Connect cable’s shield to can of overmold kit
• Seal off cable exit to keep molding compound from penetrating termination cavity
See page 6-56 for tools and dies required to crimp ferrules onto over mold cans.
Ordering Information, Overmold Crimp Ferrules
Kit Ferrule Dimensions
Size Max. Cable O.D. Part Number G H
36 0.400 CF-64 .480 (12.19) .400 (10.16)
50 0.390 CF-60 .580 (14.73) .390 (9.91)
0.480 CF-57 .580 (14.73) .480 (12.19)
Socket
InstaLatch
Ferrule
Overmold Kit, End-Entry
(May be assembled with cable exit in either direction)
.50 Ref.
Ordering Information, End-Entr y Overmold Kit
Solid Wire
Size Commercial 30Au/Ni
Plug, Bail Latching, Tin Shell 50 77-72500-51 77-72500-51A
.103 Hole, Tin-Plated Shells 50 77-82500-54 77-82500-54A
.113 Hole, Tin-Plated Shells 50 77-82500-55 77-82500-55A
Call Toll Free: 1 (800) 323-9612 6-24
.085 in. (2.16mm)
Density
Miniature Ribbon
FEATURES
■
Terminates Discrete Wire (loose or jacketed cable) with ultra-low-resistance solder connections.
■
Metal shell provides grounding and shielding capability.
■
Available in plug and socket styles in 14, 24, 36, and 50 position sizes.
■
Designed for panel mount, 180° (Top-Entr y), or 90° (Standard) / 270° (Reverse) End-Entry
cable applications.
■
All plugs lock with InstaLatch passive latch feature for automatic latching.
■
Industry-standard bail latch feature available for locking/unlocking without tools in applications
such as SCSI-1 and Centronics.
■
UL Recognized - Files E170218 (UL1977), E130965 (UL1863).
■
CSA Approved - File LR31996-7
.
Solder Cup
Metal Shell
MATERIALS
Insulator: Blue UL94V-0 rated diallyl phthalate type MDG, per MIL-M14F
Contact: Copper alloy
Contact Plating: Select gold over 50µin. select nickel standard;
30µin. select gold over 50µin. select nickel available where indicated
Shell: Steel
Shell Plating: Zinc with clear chromate coating
ENVIRONMENTAL
Operating T emperature: -40°C to +105°C
Shock: 50G Peak, per EIA Std. RS364, TP27, Condition A
Vibration: 3 cycles @ 10-55Hz in each of 3 axes per EIA Std. 364, TP28, Condition A
Moisture Resistance: Per EIA Std. RS364, TP31, Condition B, with Step 7B excluded
ELECTRICAL
Voltage Rating: 500 VAC @ sea level; 125 VAC @ 70,000 ft.
Withstanding Voltage: 1200 VAC RMS @ sea level, per EIA Std. RS364, TP20
Contact Rating: 5 Amps (4 Amps per CSA)
Contact Resistance: 6 Milliohms maximum, per EIA Std. RS364, TP6
Insulation Resistance: 5000 Megohms minimum initial;
1000 Megohms minimum after moisture
MECHANICAL
Durability: 200 mating/unmating cycles
Mating / Unmating Forces: Mating Force (max.) Unmating Force (min.)
Size Lb. Kg Lb. Kg
14 5 2.27 2 0.91
24 8 3.63 4 1.81
36 12 5.44 6 2.72
50 15 6.80 7 3.18
Termination: Each contact accepts maximum 22 AWG solid wire or maximum 24 AWG
stranded wire
6-25 Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Solder Cup
Metal Shell
Panel Mount
“Panel mount” products are connectors without hoods.They are typically used to provide signal I/O from a
system panel or cabinet, where strain relief to a cable jacket is not required.
• Available with high barrier insulators that extend beyond the end of the solder cup, physically isolating
adjacent contacts.
• Standard versions have .103" mounting holes (sockets have .103" with float bushings) for use with #3
hardware, or .185" mounting holes for use with #8 hardware.
• Select sizes are available with .120" mounting holes for use with #4 hardware, or with integral panel
clips, which allow snap-in front mounting for more cost-effective assembly.
• Bail latching sockets are available, as are bail latching plugs.While the plugs would not be panel-
mounted, they are available for premold/solder over molding applications.
See page 6-4 for recommended standard panel cutout dimensions.
See page 6-51 for accessories such as mounting screws and dust covers, which make the use of Cinch
Miniature Ribbon connectors even more cost-effective in panel-mount applications.
See the appropriate cable connector section that follows for products that include hoods for
exposed-cable applications.
Dimensions
AB C
Size in mm in mm in mm
14 1.750 44.45 1.417 35.99 0.910 23.11
24 2.175 55.25 1.842 46.79 1.335 33.91
36 2.685 68.20 2.352 59.74 1.845 46.86
50 3.260 82.80 2.947 74.85 2.440 61.98
B Max.
A Max.
A Max.
B Max.
6-26
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Solder Cup
Metal Shell
Ordering Information, Panel Mount
Plug, InstaLatching
No Barrier High Barrier
Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
14 57-10140 57-10140A 57-10140-6 57-10140-6A
.103 Hole 24 57-10240 57-10240A 57-10240-6 57-10240-6A
36 57-10360 57-10360A 57-10360-14 57-10360-14A
50 57-10500 57-10500A 57-10500-6 57-10500-6A
14 57-10140-185 57-10140-185A - -
.185 Hole 24 57-10240-4 57-10240-4A - -
36 57-10360-22 57-10360-22A - -
50 57-10500-48 57-10500-48A - -
.120 Hole 50 - - 57-10500-120 57-10500-120A
Integral Panel Clips*, .103 Hole 50 - - 57-10500-41 57-10500-41A
Bail Latching 36 - - 57-10360-28† 57-10360-28A†
Tin-Plated Shells 50 - - 57-10500-79 57-10500-79A
†
IEEE 1284-B (for foil wrap & overmold applications)
Socket No Barrier High Barrier
Latch Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
14 57-20140 57-20140A 57-20140-6 57-20140-6A
Float Mounts with 24 57-20240 57-20240A 57-20240-6 57-20240-6A
.103 Hole 36 57-20360 57-20360A 57-20360-10 57-20360-10A
50 57-20500 57-20500A 57-20500-6 57-20500-6A
14 57-20140-4 57-20140-4A - -
.185 Hole 24 57-20240-2 57-20240-2A - -
36 57-20360-3 57-20360-3A - -
50 57-20500-15 57-20500-15A - -
.120 Hole 50 - - 57-20500-120 57-20500-120A
Integral Panel Clips*, .103 Hole 50 - - 57-20500-41 57-20500-41A
14 57-40140 57-40140A 57-40140-HB 57-40140-HBA
.116 Hole 24 57-40240 57-40240A 57-40240-HB 57-40240-HBA
36 57-40360† 57-40360A† 57-40360-9† 57-40360-9A†
50 57-40500 57-40500A 57-40500-4 57-40500-4A
.116 Hole with
Tin-Plated Shell 50 57-40500-5 57-40500-5A 57-40500-28† 57-40500-28A†
* Integral Panel Clips, for front-mount only, require modified panel cutout. See page 6-52 for details.
†
IEEE 1284-B
No latchesBail latches
Through Hole Bail Latches
Float Mounts
Integral Panel Clips
6-27
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Solder Cup
Metal Shell
180° (Top-Entry) Cable
Top-Entr y products include a connector, hood, and associated hardware. They are typically used at the end of a cable, where it
is subject to physical strain and protection of the termination area is required.
• Includes all hardware required to attach hood to connector.
• Bail latching sockets have latch hardware integral to connector body, making cable assembly less costly.
• Bail latching plugs include notches that lock with industry-standard bail-lock sockets.
Socket
Plug
Dimensions
ABCD E FG
Size in mm in mm in mm in mm in mm in mm in mm
14 1.417 35.99 1.750 44.45 .306 7.77 1.495 37.97 .843 21.41 .306 7.77 .422 10.72
24 1.842 46.79 2.175 55.25 .473 11.10 1.920 48.77 .825 20.96 .473 12.01 .473 12.01
36 2.352 59.74 2.685 68.20 .639 16.23 2.431 61.75 .905 22.99 .640 16.26 .473 12.01
50 2.947 74.85 3.270 83.06 .766 19.46 3.025 76.84 .995 25.27 .766 19.46 .473 12.01
Ordering Information, 180° (Top-Entry) Cable
Plug, InstaLatching No Barrier High Barrier
Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
14 57-30140 57-30140A - -
Bail Latching 24 57-30240 57-30240A - -
36 57-30360 57-30360A - -
50 57-30500 57-30500A 57-30500-3 57-30500-3A
#4-40 Holes for captive screw 50 57-30500-4 57-30500-4A - -
Socket No Barrier High Barrier
Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
14 57-60140 57-60140A - -
With Bail Latches 24 57-60240 57-60240A - -
36 57-60360 57-60360A - -
50 57-60500 57-60500A - -
6-28
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Solder Cup
Metal Shell
90° (Standard) / 270° (Reverse) End-Entry Cable
End-Entr y connectors, available in 50 position size only, include a hood and integral cable clamp for cable exit from the end of
the connector
• The standard-orientation plug has the cable clamp on the position 1/26
end, and the standard-orientation socket has the clamp on the position
25/50 end.
• Cables may be extended end-to-end (i.e., “running cable”) by mating
standard-orientation plugs and sockets, or “doubled back” by mating a
standard-orientation connector with a reverse-orientation mate.
• Cables may exit either direction on a cable-to-panel application by
choosing standard- or reverse-orientation, depending on the desired
direction of cable exit.
• Include screw that is 5/8" long, suitable for locking directly to the body
of another connector. For locking to connectors panel-mounted
with screw-lock hardware, shor ter screws are required. See page 6-51
for these and other accessories, such as dust covers.
Running Cable Application
Double-Back Cable Application
Ordering Information, End-Entr y
Plug, InstaLatching (High Barrier, with Dust Cover)
Standard (90°) Orientation Reverse (270°) Orientation
Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
High (Standard) Hood 50 57-10500-14 57-10500-14A 57-10500-270 57-10500-270A
Low-Profile Hood 50 57-10500-7 57-10500-7A 57-10500-271 57-10500-271A
Socket (High Barrier, with Dust Cover)
Standard (90°) Orientation Reverse (270°) Orientation
Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
High (Standard) Hood 50 57-20500-7 57-20500-7A 57-20500-270 57-20500-270A
Low-Profile Hood 50 57-20500-19 57-20500-19A 57-20500-271 57-20500-271A
6-30
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
FEATURES
■
Terminates Discrete Wire without soldering, on .025" sq. or .045" sq. tails.
■
All-plastic design reduces cost. Metal Shell available where indicated for improved shielding.
■
Available in plug and socket styles in 14, 24, 36, 50, and 64 position siz es.
■
All plugs lock with InstaLatch passive latch feature for automatic latching.
Sockets available with InstaLatches where indicated.
■
Available with industry-standard bail latch feature for positive locking/unlocking without tools.
■
UL Recognized - Files E170218 (UL1977), E130965 (UL1863).
■
CSA Approved - File LR31996-7.
Wire Wrap
Metal Shell and All-Plastic
MATERIALS
Insulator (Metal Shell Product): Blue UL94V-0 rated dialyll phthalate type MDG per MIL-M14F
Insulator (All-Plastic Product): Gray UL94V-0 rated dialyll phthalate type MDG per MIL-M14F
Contact: Copper alloy
Contact Plating: Select gold over 50µin. select nickel standard;
30µin. select gold over 50µin. select nickel available where indicated
Wire-Wrap T erminal: Cupro nickel
Shell (Metal Shell Product): Steel
Shell Plating (Metal Shell Product): Zinc with clear chromate coating
ENVIRONMENTAL
Operating T emperature: -40°C to +105°C
Shock: 50G Peak, per EIA Std. RS364, TP27, Condition A
Vibration: 3 cycles @ 10-55Hz in each of 3 axes per EIA Std. 364, TP28, condition A
Moisture Resistance: Per EIA Std. RS364, TP31, Condition B, with step 7B excluded
ELECTRICAL
Voltage Rating: 500 VAC @ sea level; 125 VAC @ 70,000 ft.
Withstanding Voltage: 1200 VAC RMS @ sea level, per EIA Std. RS364, TP20
Contact Rating: 5 Amps (4 Amps per CSA)
Contact Resistance: 6 milliohms maximum, per EIA Std. RS364, TP6
Insulation Resistance: 5000 Megohms minimum initial;
1000 Megohms minimum after moisture
MECHANICAL
Durability: 200 mating/unmating cycles
Mating / Unmating Forces: Mating Force (max.) Unmating Force (min.)
with InstaLatches without InstaLatches
Size Lb. Kg Lb. Kg
14 12 5.44 2 0.91
24 17 7.71 4 1.81
36 23 10.43 6 2.72
50 32 14.52 7 3.18
64 37 16.78 8 3.63
6-31 Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Wire Wrap
Metal Shell and All-Plastic
Metal Shell
• Metal Shell Wire Wrap connectors are available with .025" sq. or .045" sq. x 1.35" (.56" wrap length)
terminals. .045" sq. terminals are also available with .850" (.28" wrap length) terminals.
• Available with .103" mounting holes for #3 hardware.
Sockets also available with bail latches and .116" holes.
See page 6-4 for recommended standard panel cutout dimensions.
See page 6-51 for accessories such as mounting screws, bent bail latches,
and dust covers, which make the use of Cinch Miniature Ribbon
connectors even more cost-effective.
Dimensions
ABCD
Sizes in mm in mm in mm in mm
14 1.750 44.45 1.417 35.99 0.710 18.03 0.510 12.95
24 2.175 55.25 1.842 46.79 1.135 28.83 0.935 23.75
36 2.665 67.69 2.352 59.74 1.645 41.78 1.445 36.70
50 3.260 82.80 2.947 74.85 2.240 56.90 2.040 51.82
Metal Plug Metal Socket
Bail Latches
Ordering Information, Metal Shell
Plug, InstaLatching .025" sq. x 1.35" Terminals .045" sq. x 1.35" Terminals .045" sq. x .85" Terminals
Size Commercial 30Au/Ni Commercial 30Au/Ni Commercial 30Au/Ni
14 57-10140-WW1 57-10140-WW1A 57-10140-WW2 57-10140-WW2A 57-10140-WW3 57-10140-WW3A
.103 Hole 24 57-10240-WW1 57-10240-WW1A 57-10240-WW2 57-10240-WW2A 57-10240-WW3 57-10240-WW3A
36 57-10360-WW1 57-10360-WW1A 57-10360-WW2 57-10360-WW2A 57-10360-WW3 57-10360-WW3A
50 57-10500-WW1 57-10500-WW1A 57-10500-WW2 57-10500-WW2A 57-10500-WW3 57-10500-WW3A
Socket .025" sq. x 1.35" Terminals .045" sq. x 1.35" Terminals .045" sq. x .85" Terminals
Size Commercial 30Au/Ni Commercial 30Au/Ni Commercial 30Au/Ni
14 57-20140-WW1 57-20140-WW1A 57-20140-WW2 57-20140-WW2A 57-20140-WW3 57-20140-WW3A
.103 Hole 24 57-20240-WW1 57-20240-WW1A 57-20240-WW2 57-20240-WW2A 57-20240-WW3 57-20240-WW3A
36 57-20360-WW1 57-20360-WW1A 57-20360-WW2 57-20360-WW2A 57-20360-WW3 57-20360-WW3A
50 57-20500-WW1 57-20500-WW1A 57-20500-WW2 57-20500-WW2A 57-20500-WW3 57-20500-WW3A
14 57-20140-WW4 57-20140-WW4A - - - -
Bail Latches, .116 Hole 24 57-20240-WW4 57-20240-WW4A - - - -
36 57-20360-WW4 57-20360-WW4A - - - -
50 57-20500-WW4 57-20500-WW4A - - - -
6-32
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Wire Wrap
Metal Shell and All-Plastic
All-Plastic
• All-plastic Wire Wrap connectors are available with .025" sq. or .045" sq. x 1.35" (.56" wrap length) ter minals.
• Available with .141" or .125" mounting holes as indicated, for #4 hardware.
• Includes InstaLatch passive latch feature for automatic latching.
Sockets also available without latches.
See pages 6-4 and 6-52 for recommended panel cutout dimensions.
See pages 6-51 thru 6-52 for accessories such as mounting screws and dust covers, which make the use of Cinch Miniature Ribbon
connectors even more cost-effective in panel-mount applications.
All-Plastic Socket
Plug
ABCD
Sizeinmminmminmminmm
14 1.745 44.32 1.417 35.99 0.710 18.03 0.510 12.95
24 2.170 55.12 1.842 46.79 1.135 28.83 0.935 23.75
36 2.680 68.07 2.352 59.74 1.645 41.78 1.445 36.70
50 3.275 83.19 2.947 74.85 2.240 56.90 2.040 51.82
64 3.875 98.43 3.542 89.97 2.835 72.01 2.635 66.93
Dimensions, All-Plastic
6-33
6
Call Toll Free: 1 (800) 323-9612
Ordering Information, All-Plastic
Plug, InstaLatching
.025" sq. x 1.35" Terminals .045" sq. x 1.35" Terminals
Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
.140 Hole 24 - - 97-10240-WW2 97-10240-WW2A
64 - - 97-10640-WW2 97-10640-WW2A
Socket
.025" sq. x 1.35" Terminals .045" sq. x 1.35" Terminals
Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
14 97-22140-WW5 97-22140-WW5A 97-22140-WW6 97-22140-WW6A
.141 Hole 24 97-22240-WW5 97-22240-WW5A 97-22240-WW6 97-22240-WW6A
36 97-22360-WW5 97-22360-WW5A 97-22360-WW6 97-22360-WW6A
50 97-22500-WW5 97-22500-WW5A 97-22500-WW6 97-22500-WW6A
.159 Hole 64 97-22640-WW5 97-22640-WW5A 97-22640-WW6 97-22640-WW6A
14 97-22140-WW1 97-22140-WW1A 97-22140-WW2 97-22140-WW2A
.141 Hole 24 97-22240-WW1 97-22240-WW1A 97-22240-WW2 97-22240-WW2A
36 97-22360-WW1 97-22360-WW1A 97-22360-WW2 97-22360-WW2A
50 97-22500-WW1 97-22500-WW1A 97-22500-WW2 97-22500-WW2A
.159 Hole 64 97-22640-WW1 97-22640-WW1A 97-22640-WW2 97-22640-WW2A
No latchesInstaLatches
.085 in. (2.16mm)
Density
Miniature Ribbon
Wire Wrap
Metal Shell and All-Plastic
6-34
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
FEATURES
■
Straight Solder Tails for solder termination to printed circuit board in lengths for use on all standard
thickness boards.
■
Surface Mount Compatible; withstands vapor-phase and IR reflow processes.
■
Metal shell provides grounding and shielding capability.
■
Available in plug and socket styles in 14, 24, 36, and 50 position sizes.
■
All plugs lock with InstaLatch passive latch feature for automatic latching.
■
Industry-standard bail latch feature available for locking/unlocking without tools in applications such as
SCSI-1 and Centronics.
■
Available, where indicated, with J-Hook latches that automatically lock down mating end-entry
connectors.
■
Available, where indicated, with through-hole or threaded standoffs for improved board mounting.
■
Sockets available with through holes or with float mounts to provide limited self-alignment.
■
UL Recognized - Files E170218 (UL1977), E130965 (UL1863).
■
CSA Approved - File LR31996-7.
Vertical-Mount Solder Tail
Metal Shell
MATERIALS
Insulator: Blue UL94V-0 rated diallyl phthalate type MDG, per MIL-M14F
Contact: Copper alloy
Contact Plating: Select gold over 50µin. select nickel standard;
30µin. select gold over 50µin. select nickel available where indicated.
Gold flash on solder tails
Shell: Steel
Shell Plating: Zinc with clear chromate coating standard.Tin available where indicated.
ENVIRONMENTAL
Operating T emperature: -40°C to +105°C
Shock: 50G Peak, per EIA Std. RS364, TP27, Condition A
Vibration: 3 cycles @ 10-55Hz in each of 3 axes per EIA Std. 364, TP28, Condition A
Moisture Resistance: Per EIA Std. RS364, TP31, Condition B, with Step 7B excluded
ELECTRICAL
Voltage Rating: 500 VAC @ sea level; 125 VAC @ 70,000 ft.
Withstanding Voltage: 1200 VAC RMS @ sea level, per EIA Std. RS364, TP20
Contact Rating: 5 Amps (4 Amps per CSA)
Contact Resistance: 6 milliohms maximum, per EIA Std. RS364, TP6
Insulation Resistance: 5000 Megohms minimum initial;
1000 Megohms minimum after moisture
MECHANICAL
Durability: 200 mating/unmating cycles
Mating / Unmating Forces:
Mating Force (max.) Unmating Force (min.)
Size Lb. Kg Lb. Kg
14 5 2.27 2 0.91
24 8 3.63 4 1.81
36 12 5.44 6 2.72
50 15 6.80 7 3.18
6-35
.085 in. (2.16mm)
Density
Miniature Ribbon
Vertical-Mount Solder Tail
Metal Shell
J-Hook
Latches
J-Hook Latches
Insulated Standoff
Conductive Standoff
Plug, InstaLatching
Dimensions
Call Toll Free: 1 (800) 323-9612
Plug
ABC
Size inmmin mmin mm
14 1.750 44.45 1.417 35.99 0.910 23.11
24 2.175 55.25 1.842 46.79 1.335 33.91
36 2.685 68.20 2.352 59.74 1.845 46.86
50 3.260 82.80 2.947 74.85 2.440 61.98
Ordering Information, Plug, InstaLatching
.110" Tail Length (J) .145" Tail Length (J) .190" Tail Length (J)
(for PCB thickness up to .062" nominal) (for PCB thickness up to .093" nominal) (for PCB thickness up to .125" nominal)
Mount Size Commercial 30Au/Ni Commercial 30Au/Ni Commercial 30Au/Ni
14 57-10140-4 57-10140-4A 57-10140-5 57-10140-5A 57-DS14P2-3 57-DS14P2-3A
24 57-10240-3 57-10240-3A 57-10240-5 57-10240-5A 57-10240-12 57-10240-12A
.103 Hole 36 57-10360-13 57-10360-13A 57-10360-17 57-10360-17A 57-10360-25 57-10360-25A
50 57-10500-27 57-10500-27A 57-10500-46 57-10500-46A 57-10500-73 57-10500-73A
14 57-DS14P1-1 57-DS14P1-1A 57-DS14P1-2 57-DS14P1-2A 57-DS14P1-3 57-DS14P1-3A
24 57-DS24P1-1 57-DS24P1-1A 57-DS24P1-2 57-DS24P1-2A 57-DS24P1-3 57-DS24P1-3A
.185 Hole 36 57-DS36P1-1 57-DS36P1-1A 57-DS36P1-2 57-DS36P1-2A 57-DS36P1-3 57-DS36P1-3A
50 57-DS50P1-1 57-DS50P1-1A 57-DS50P1-2 57-DS50P1-2A 57-DS50P1-3 57-DS50P1-3A
Conductive Standoff
.120 (Ref) Hole 50 - - - - 57-10500-76 57-10500-76A
Conductive Standoff
4-40 Hole 50 - - - - 57-10500-77 57-10500-77A
Insulated Standoff
.120 (Ref) Hole 50 - - - - 57-10500-68 57-10500-68A
Insulated Standoff
4-40 Hole 50 - - - - 57-10500-69 57-10500-69A
Conductive Standoff
.120 (Ref) Hole 50 - - - - 57-10500J-76 57-10500J-76A
Conductive Standoff
4-40 Hole 50 - - - - 57-10500J-77 57-10500J-77A
Insulated Standoff
.120 (Ref) Hole 50 - - - - 57-10500J-68 57-10500J-68A
Insulated Standoff
4-40 Hole 50 - - - - 57-10500J-69 57-10500J-69A
6-36
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Vertical-Mount Solder Tail
Metal Shell
Socket
Dimensions
J-Hook Latches
Bail Latches with Standoffs
.116 (2.95) Min. Dia.
Recommended PCB Hole Layout
Socket with Bail Latches
Socket with Float Bushing
ABC
Size inmmin mmin mm
14 1.750 44.45 1.417 35.99 0.910 23.11
24 2.175 55.25 1.842 46.79 1.335 33.91
36 2.685 68.2 2.352 59.74 1.845 46.86
50 3.260 82.8 2.947 74.85 2.440 61.98
A
B
6-37
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Vertical-Mount Solder Tail
Metal Shell
No LatchesJ-Hook
Latches Bail Latches
Socket
Ordering Information
.110" Tail Length (J) .145" Tail Length (J) .190" Tail Length (J)
(for PCB thickness up to .062" nominal) (for PCB thickness up to .093" nominal) (for PCB thickness up to .125" nominal)
Latch Mount Size Commercial 30Au/Ni Commercial 30Au/Ni Commercial 30Au/Ni
14 57-20140-8 57-20140-8A - - - -
Float Mounts with 24 57-20240-8 57-20240-8A - - - -
.103 Hole 36 57-20360-9 57-20360-9A - - - -
50 57-20500-31 57-20500-31A - - - -
14 57-20140-12 57-20140-12A 57-20140-10 57-20140-10A 57-DS14S1-3 57-DS14S1-3A
.185 Hole 24 57-20240-14 57-20240-14A 57-20240-11 57-20240-11A 57-20240-23 57-20240-23A
36 57-20360-15 57-20360-15A 57-20360-13 57-20360-13A 57-20360-19 57-20360-19A
50 57-20500-65 57-20500-65A 57-20500-58 57-20500-58A 57-20500-85 57-20500-85A
14 57-40140-8 57-40140-8A 57-40140-11 57-40140-11A 57-DS14S-3 57-DS14S-3A
.116 Hole 24 57-40240-9 57-40240-9A 57-40240-11 57-40240-11A 57-40240-14 57-40240-14A
36 57-40360-12† 57-40360-12A† 57-40360-16† 57-40360-16A† 57-40360-24† 57-40360-24A†
50 57-40500-9 57-40500-9A 57-40500-16 57-40500-16A 57-40500-24 57-40500-24A
Conductive Standoff
4-40 Hole 50 - - - - 57-40500-26 57-40500-26A
Insulated Standoff
.120 (Ref) Hole 50 - - - - 57-20500J-78 57-20500J-78A
Insulated Standoff
4-40 Hole 50 - - - - 57-20500J-79 57-20500J-79A
†
IEEE 1284-B
6-38
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
FEATURES
■
Straight Solder Tails for solder termination to printed circuit board.
■
Available with .145" or .190" tail lengths to suit applications with any thickness PC boar
d.
■
All-plastic design reduces cost.
■
Available in plug and socket styles in 14, 24, 36, 50, and 64 position siz es.
■
All plugs lock with InstaLatch passive latch feature for automatic latching.
Sockets available with InstaLatches, with Bail Latches in sizes indicated, or with no latches.
■
Available with through holes or with #4-40 holes for mounting/latching.
■
UL Recognized - Files E170218 (UL1977), E130965 (UL1863).
■
CSA Approved - File LR31996-7.
Vertical-Mount Solder Tail
All-Plastic
MATERIALS
Insulator: Gray UL94V-0 rated glass-filled polyester
Contact: Copper Alloy
Contact Plating: Select gold over 50µin. select nickel standard;
30µin. select gold over 50µin. select nickel
available where indicated. Gold flash on
solder tails
ENVIRONMENTAL
Operating T emperature: -40°C to +105°C
Shock: 50G Peak, per EIA Std. RS364, TP27, Condition A
Vibration: 3 cycles @ 10-55Hz in each of 3 axes per EIA
Std. 364, TP28, Condition A
Moisture Resistance: Per EIA Std. RS364, TP31, Condition B,
with Step 7B excluded
ELECTRICAL
Voltage Rating: 500 VAC @ sea level; 125 VAC @ 70,000 ft.
Withstanding Voltage: 1200 VAC RMS @ sea level, per EIA
Std. RS364, TP20
Contact Rating: 5 Amps (4 Amps per CSA)
Contact Resistance: 6 milliohms maximum, per EIA Std.
RS364, TP6
Insulation Resistance: 5000 Megohms minimum initial;
1000 Megohms minimum after moisture
MECHANICAL
Durability: 200 mating/unmating cycles
Mating / Unmating Forces:
Mating Force (max.) Unmating Force (min.)
with InstaLatches without InstaLatches
Size Lb. Kg Lb. Kg
14 12 5.44 2 0.91
24 17 7.71 4 1.81
36 23 10.43 6 2.72
50 32 14.52 7 3.18
64 37 16.78 8 3.63
6-39 Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Vertical-Mount Solder Tail
All-Plastic
Dimensions
Ver tical-mount Miniature Ribbon connectors provide I/O directly from
printed circuit boards, where the mating face of the connector is in a
plane parallel to that of the board.
See page 6-51 for accessories such as dust covers, bent bail latches,
and mounting screws that make the use of Cinch Miniature Ribbon
connectors even more cost-effective in board-mount applications.
Recommended PCB Hole Layout
With Bail Latches
With InstaLatches
Socket
Plug
AB
Sizeinmminmm
14 1.745 44.32 1.417 35.99
24 2.170 55.12 1.842 46.79
36 2.680 68.07 2.352 59.74
50 3.275 83.19 2.947 74.85
64 3.875 98.43 3.542 89.97
J
.238 (6.05)
J
Ordering Information,Vertical-Mount Solder Tail
Plug, InstaLatching
.138" Tail Length (J) .183" Tail Length (J)
(for PCB thickness (for PCB thickness
up to .093" nominal) up to .125" nominal)
Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
14 97-DSP14-2 97-DSP14-2A 97-DSP14-3 97-DSP14-3A
24 97-DSP24-2 97-DSP24-2A 97-DSP24-3 97-DSP24-3A
.125 Hole 36 97-DSP36-2 97-DSP36-2A 97-DSP36-3 97-DSP36-3A
50 97-DSP50-2 97-DSP50-2A 97-DSP50-3 97-DSP50-3A
64 97-DSP64-2 97-DSP64-2A 97-DSP64-3 97-DSP64-3A
14 97-DSP14-12 97-DSP14-12A 97-DSP14-13 97-DSP14-13A
24 97-DSP24-12 97-DSP24-12A 97-DSP24-13 97-DSP24-13A
#4-40 Hole 36 97-DSP36-12 97-DSP36-12A 97-DSP36-13 97-DSP36-13A
50 97-DSP50-12 97-DSP50-12A 97-DSP50-13 97-DSP50-13A
64 97-DSP64-12 97-DSP64-12A 97-DSP64-13 97-DSP64-13A
Socket
.138" Tail Length (J) .183" Tail Length (J)
(for PCB thickness (for PCB thickness
up to .093" nominal) up to .125" nominal)
Latch Mount Size Commercial 30Au/Ni Commercial 30Au/Ni
14 97-DSS14-22 97-DSS14-22A 97-DSS14-23 97-DSS14-23A
24 97-DSS24-22 97-DSS24-22A 97-DSS24-23 97-DSS24-23A
.125 Hole 36 97-DSS36-22 97-DSS36-22A 97-DSS36-23 97-DSS36-23A
64 97-DSS64-22 97-DSS64-22A 97-DSS64-23 97-DSS64-23A
.160 Hole 50 97-DSS50-22 97-DSS50-22A 97-DSS50-23 97-DSS50-23A
14 97-DSS14-32 97-DSS14-32A 97-DSS14-33 97-DSS14-33A
24 97-DSS24-32 97-DSS24-32A 97-DSS24-33 97-DSS24-33A
#4-40 Hole 36 97-DSS36-32 97-DSS36-32A 97-DSS36-33 97-DSS36-33A
50 97-DSS50-32 97-DSS50-32A 97-DSS50-33 97-DSS50-33A
64 97-DSS64-32 97-DSS64-32A 97-DSS64-33 97-DSS64-33A
14 97-DSS14-2 97-DSS14-2A 97-DSS14-3 97-DSS14-3A
24 97-DSS24-2 97-DSS24-2A 97-DSS24-3 97-DSS24-3A
.125 Hole 36 97-DSS36-2 97-DSS36-2A 97-DSS36-3 97-DSS36-3A
64 97-DSS64-2 97-DSS64-2A 97-DSS64-3 97-DSS64-3A
.160 Hole 50 97-DSS50-2 97-DSS50-2A 97-DSS50-3 97-DSS50-3A
14 97-DSS14-12 97-DSS14-12A 97-DSS14-13 97-DSS14-13A
24 97-DSS24-12 97-DSS24-12A 97-DSS24-13 97-DSS24-13A
#4-40 Hole 36 97-DSS36-12 97-DSS36-12A 97-DSS36-13 97-DSS36-13A
50 97-DSS50-12 97-DSS50-12A 97-DSS50-13 97-DSS50-13A
64 97-DSS64-12 97-DSS64-12A 97-DSS64-13 97-DSS64-13A
24 97-DSS24-42 97-DSS24-42A 97-DSS24-43 97-DSS24-43A
Bail Latches, .116 Hole 36 97-DSS36-42 97-DSS36-42A 97-DSS36-43 97-DSS36-43A
50 97-DSS50-42 97-DSS50-42A 97-DSS50-43 97-DSS50-43A
6-40
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Vertical-Mount Solder Tail
All-Plastic
No latchesInstaLatches
6-42
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
FEATURES
■
Straight Compliant Pin for solderless termination to printed circuit board.
■
All-plastic design reduces cost. Metal Shell also available where indicated for
improved shielding.
■
Available in plug and socket styles in 14, 24, 36, 50, and 64 position siz es.
■
All plugs lock with InstaLatch passive latch feature for automatic latching.
Sockets available with InstaLatches, with Bail Latches where indicated, or with no latches.
■
Available with through holes or with #4-40 holes for mounting/latching.
■
Includes Seating Cover that allows for flat-rock insertion and serves as dust
cover after insertion.
■
UL Recognized - Files E170218 (UL1977), E130965 (UL1863).
■
CSA Approved - File LR31996-7.
Vertical-Mount Compliant Pin
All-Plastic and Metal Shell
MATERIALS
Insulator and Seating Cover: Gray UL94V-0 rated glass-filled
polyester
Contact: Phosphor bronze
Contact Plating: Select gold over 50µin. select nickel standard;
30µin. select gold over 50µin. select nickel
available where indicated. Gold flash in
termination area
Shell (Metal Shell Version Only): Steel
Shell Plating (Metal Shell Version Only): Tin
ENVIRONMENTAL
Operating T emperature: -40°C to +105°C
Shock: 50G Peak, per EIA Std. RS364, TP27, Condition A
Vibration: 3 cycles @ 10-55Hz in each of 3 axes per EIA Std.
364, TP28, Condition A
Moisture Resistance: Per EIA Std. RS364, TP31, Condition B,
with Step 7B excluded
ELECTRICAL
Voltage Rating: 500 VAC @ sea level; 125 VAC @ 70,000 ft.
Withstanding Voltage: 1200 VAC RMS @ sea level, per EIA Std.
RS364, TP20
Contact Rating: 5 Amps (4 Amps per CSA)
Contact Resistance: 6 milliohms maximum, per EIA Std.
RS364, TP6
Insulation Resistance: 5000 Megohms minimum initial;
1000 Megohms minimum after moisture
MECHANICAL
Durability: 200 mating/unmating cycles
Mating / Unmating Forces:
Mating Force (max.) Unmating Force (min.)
with InstaLatches without InstaLatches
Size Lb. Kg Lb. Kg
14 12 5.44 2 0.91
24 17 7.71 4 1.81
36 23 10.43 6 2.72
50 32 14.52 7 3.18
64 37 16.78 8 3.63
Connector/PCB Insertion Force (maximum): 25 lbs (12.3Kg) per contact
Connector/PCB Retention Force: 5 lb. (2.44Kg) per contact
(minimum, without mounting hardware)
6-43 Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Ver tical-mount Miniature Ribbon connectors provide I/O directly from printed circuit boards, where the mating face of
the connector is in a plane parallel to that of the board.
Compliant-pin connectors terminate without solder to plated-through holes in pr inted circuit boards. The tail conforms
to the hole, providing a gas-tight ter mination without damaging the plating in the printed circuit board.
The seating cover acts as an inser tion tool fixture, and
must be left in place until the connector is installed on the
PCB.
It may also be left on after inser tion to ser ve as a dust cover to protect the connector from contamination.
See pages 6-51 through 6-53 for accessories such as bent bail latches and mounting screws that make the use of
Cinch Miniature Ribbon connectors even more cost-effective in board-mount applications.
Dimensions ABC
Size inmm inmm inmm
14 1.745 44.32 1.417 35.99 .625 15.88
24 2.170 55.12 1.842 46.79 1.050 26.67
36 2.680 68.07 2.352 59.74 1.560 39.62
50 3.275 83.19 2.947 74.85 2.155 54.74
64 3.875 98.43 3.542 89.97 2.750 69.85
Socket with InstaLatches
"C"
Plug Socket with Bail Latches
Insertion Fixture Backer Plate
Recommended PCB Hole Layout
Vertical-Mount Compliant Pin
All-Plastic and Metal Shell
6-44
6
Call Toll Free: 1 (800) 323-9612
Ordering Information,Vertical-Mount Compliant Pin
All-Plastic Plug, InstaLatching
Mount Size Commercial 30Au/Ni
14 97-CP-14 97-CP-14A
24 97-CP-24 97-CP-24A
.125 Hole 36 97-CP-36 97-CP-36A
50 97-CP-50 97-CP-50A
64 97-CP-64 97-CP-64A
14 97-CP-14T 97-CP-14TA
24 97-CP-24T 97-CP-24TA
#4-40 Hole 36 97-CP-36T 97-CP-36TA
50 97-CP-50T 97-CP-50TA
64 97-CP-64T 97-CP-64TA
All-Plastic Socket
Latch
Mount Size Commercial 30Au/Ni
14 97-CS-14 97-CS-14A
24 97-CS-24 97-CS-24A
.160 Hole 36 97-CS-36 97-CS-36A
50 97-CS-50 97-CS-50A
64 97-CS-64 97-CS-64A
14 97-CS-14T 97-CS-14TA
24 97-CS-24T 97-CS-24TA
#4-40 Hole 36 97-CS-36T 97-CS-36TA
50 97-CS-50T 97-CS-50TA
64 97-CS-64T 97-CS-64TA
14 97-CSI-14 97-CSI-14A
24 97-CSI-24 97-CSI-24A
.160 Hole 36 97-CSI-36 97-CSI-36A
50 97-CSI-50 97-CSI-50A
64 97-CSI-64 97-CSI-64A
14 97-CSI-14T 97-CSI-14TA
24 97-CSI-24T 97-CSI-24TA
#4-40 Hole 36 97-CSI-36T 97-CSI-36TA
50 97-CSI-50T 97-CSI-50TA
64 97-CSI-64T 97-CSI-64TA
14 97-CSB-14 97-CSB-14A
24 97-CSB-24 97-CSB-24A
.116 Hole 36 97-CSB-36 97-CSB-36A
50 97-CSB-50 97-CSB-50A
64 97-CSB-64 97-CSB-64A
Metal Shell Socket, with InstaLatches
Commercial 30Au/Ni
Conductive Standoff 50 57-CSI-50 57-CSI-50A
with .120 Hole
Bail latches InstaLatches No latches
.085 in. (2.16mm)
Density
Miniature Ribbon
Vertical-Mount Compliant Pin
All-Plastic and Metal Shell
6-46
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
FEATURES
■
Right-Angle Solder Tails for solder termination to printed circuit board.
■
Metal shell provides grounding and shielding capability.
■
Available in plug and socket styles in 14, 24, 36, and 50 position sizes.
■
Sockets available with industry-standard bail latch feature for positive locking/unlocking without
tools, for applications such as SCSI-1 and Centronics.
■
#4-40 threaded board mounting holes provide means to secure and ground connector to board.
■
UL Recognized - File E170218.
Right-Angle Solder Tail
Metal Shell
MATERIALS
Insulator: Blue UL94V-0 rated glass-filled polyester
Contact: Phosphor bronze
Contact Plating: Select gold over nickel in mating area
as indicated; tin-lead on solder tails
Shell: Steel
Shell Plating: Nickel
ENVIRONMENTAL
Operating T emperature: -55°C to +105°C
ELECTRICAL
Withstanding Voltage: 1000 VAC RMS @ sea level
Contact Rating: 5 Amps
Contact Resistance: 30 milliohms maximum
Insulation Resistance: 1000 Megohms minimum
Right-Angle Miniature Ribbon connectors provide I/O directly from printed
circuit boards, where the mating face of the connector is perpendicular to
the board. It is well-suited to front-panel I/O on plug-in cards, rear-I/O from
system/peripheral motherboards, etc.
See page 6-51 for accessories such as dust covers, bent bail latches
and mounting screws that make the use of Cinch Miniature Ribbon
connectors even more cost-effective in board-mount applications.
6-47 Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Right-Angle Solder Tail
Metal Shell
Dimensions
ABCD
Size in mm in mm in mm in mm
14 1.720 43.70 1.417 35.99 0.992 25.20 1.008 25.60
24 2.146 54.50 1.842 46.79 1.417 36.00 1.436 36.00
36 2.661 67.60 2.352 59.74 1.925 48.90 1.943 49.35
50 3.260 82.80 2.947 74.85 2.520 64.00 2.538 64.00
Socket Plug
No Latches
Bail Latch
Ordering Information, Right-Angle Solder Tail
Plug, 4-40 Board Mount
Size Flash 15Au/Ni 30Au/Ni
36 57-LRP36-F 57-LRP36-15 57-LRP36-30
50 57-LRP50-F 57-LRP50-15 57-LRP50-30
Socket, 4-40 Board Mount
Latch Size Flash 15Au/Ni 30Au/Ni
14 57-LRS14-F 57-LRS14-15 57-LRS14-30
24 57-LRS24-F 57-LRS24-15 57-LRS24-30
36 57-LRS36-F 57-LRS36-15 57-LRS36-30
50 57-LRS50-F 57-LRS50-15 57-LRS50-30
14 57-LRS14-BF 57-LRS14-B15 57-LRS14-B30
24 57-LRS24-BF 57-LRS24-B15 57-LRS24-B30
36 57-LRS36-BF† 57-LRS36-B15† 57-LRS36-B30†
50 57-LRS50-BF 57-LRS50-B15 57-LRS50-B30
†
IEEE 1284-B
6-48
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
FEATURES
■
Low-pass (single-pole, capacitive) filtered contacts reduce inbound and outbound conducted
EMI standard capacitance values of 50pF through 1,200pF.
■
Saves space by incorporating required filter functions directly into footprint of I/O connector.
■
Available as straight Solder Tail plug for solder termination to printed circuit board
(nominal thickness through .093") and as plug/socket adapter, in 50-position size.
■
All-plastic design reduces cost.
■
All plugs lock with InstaLatchpassive latch feature for automatic latching.
■
Adapters available with InstaLatches, with Bail Latches, or with no latches on socket side.
■
Available with through holes, #4-40 holes, #6-32 holes, or M3 holes for mounting/latching.
Filtered
Vertical-Mount Solder Tail
and Male/Female Adapter
MATERIALS
Insulator: Gray UL94V-0 rated glass-filled polyester
Contact: Copper alloy
Contact Plating: 30µin. select gold over 50µin. select nickel
standard; tin-lead on solder tails
Mounting Hardware Plating: Tin-lead
ENVIRONMENTAL
Operating T emperature: -50°C to +105°C
Shock: 50G Peak, per EIA Std. RS364, TP27, Condition A
Vibration: 3 cycles @ 10-55Hz in each of 3 axes per EIA Std.
364, TP28, Condition A
Moisture Resistance: Per EIA Std. RS364, TP31, Condition B,
with Step 7B excluded
ELECTRICAL
Voltage Rating: 500VDC @ sea level
Contact Rating: 3 Amps
RF Current Rating: 0.3 Amps
Leakage Current: 10mA maximum per contact when subjected to
1000 VAC test voltage, applied over 30 seconds
and held for 60 seconds per FCC Part 68.5
Voltage Surge: Withstands 1,500V peak longitudinal voltage
surge with 10µsec. risetime, 160µsec. decay
Contact Resistance: 6 milliohms maximum, per EIA Std. RS364, TP6
Insulation Resistance: 5000 Megohms minimum
Dissipation Factor: 5% maximum @ 25°C, 1kHz and
1 VAC RMS maximum
Insertion Loss:
Capacitance Inser tion Loss, min. (dB, @ 25°C, @ 50 ohm, no load, per MIL-STD-220)
@ 25°C, 1kHz, 1 VAC RMS max. 10MHz 30MHz 50MHz 70MHz 100MHz 500MHz 1GHz
50pF+15% - - - - 2 14 11
100pF+15% - - - - 3 14 11
220pF+15% - - 4 7 12 14 11
470pF+15% - 5 11 14 20 14 11
820pF+15% 3 3 16 20 20 14 11
1,000pF+15% 3 3 16 20 20 14 11
1,200pF+15% 3 3 16 20 20 14 11
MECHANICAL
Durability: 200 mating/unmating cycles
Mating / Unmating Forces:
Mating Force (max.) Unmating Force (min.)
with InstaLatches without InstaLatches
Size Lb. Kg Lb. Kg
50 32 14.52 7 3.18
Ordering Information, Filtered Ver tical-Mount Solder Tail Plug, 50 Position
Capacitance .144 Hole #4-40 Hole #6-32 Hole M3 -0.5 Hole
50pF±15% CF97-50PB-TH CF97-50PB-4T CF97-50PB-6T CF97-50PB-3T
100pF±15% CF97-50PC-TH CF97-50PC-4T CF97-50PC-6T CF97-50PC-3T
220pF±15% CF97-50PD-TH CF97-50PD-4T CF97-50PD-6T CF97-50PD-3T
470pF±15% CF97-50PE-TH CF97-50PE-4T CF97-50PE-6T CF97-50PE-3T
820pF±15% CF97-50PF-TH CF97-50PF-4T CF97-50PF-6T CF97-50PF-3T
1,000pF±15% CF97-50PH-TH CF97-50PH-4T CF97-50PH-6T CF97-50PH-3T
1,200pF±15% CF97-50PJ-TH CF97-50PJ-4T CF97-50PJ-6T CF97-50PJ-3T
50pF±15% - CF97-50PB-4B CF97-50PB-6B CF97-50PB-3B
100pF±15% - CF97-50PC-4B CF97-50PC-6B CF97-50PC-3B
220pF±15% - CF97-50PD-4B CF97-50PD-6B CF97-50PD-3B
470pF±15% - CF97-50PE-4B CF97-50PE-6B CF97-50PE-3B
820pF±15% - CF97-50PF-4B CF97-50PF-6B CF97-50PF-3B
1,000pF±15% - CF97-50PH-4B CF97-50PH-6B CF97-50PH-3B
1,200pF±15% - CF97-50PJ-4B CF97-50PJ-6B CF97-50PJ-3B
6-49 Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Filtered
Vertical-Mount Solder Tail
and Male/Female Adapter
Filtered Vertical-Mount Solder Tail Plug
Ver tical-mount Filtered Miniature Ribbon plugs provide filtered I/O directly from printed circuit boards, where the
mating face of the connector is in a plane parallel to that of the board. Filtering keeps conducted EMI from passing
between the system board and I/O cable.
The connector’s filter must be grounded to the system at the mounting holes, via either top flange or through the
lower standoff to a pad on the component side of the printed circuit board.
See page 6-51 for accessories such as dust covers and mounting screws that make the use of Cinch Filtered
Miniature Ribbon connectors even more cost-effective in board-mount applications.
Through or
threader hole
Threaded
Boardlock
6-50
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Filtered
Vertical-Mount Solder Tail
and Male/Female Adapter
Ordering Information, Filtered Adapter, 50 position
Capacitance #4-40 Hole #6-32 Hole M3 -0.5 Hole
None (Connector Saver) CF97-50AA-4T CF97-50AA-6T CF97-50AA-3T
50pF±15% CF97-50AB-4T CF97-50AB-6T CF97-50AB-3T
100pF±15% CF97-50AC-4T CF97-50AC-6T CF97-50AC-3T
220pF±15% CF97-50AD-4T CF97-50AD-6T CF97-50AD-3T
470pF±15% CF97-50AE-4T CF97-50AE-6T CF97-50AE-3T
820pF±15% CF97-50AF-4T CF97-50AF-6T CF97-50AF-3T
1,000pF±15% CF97-50AH-4T CF97-50AH-6T CF97-50AH-3T
1,200pF±15% CF97-50AJ-4T CF97-50AJ-6T CF97-50AJ-3T
None (Connector Saver) CF97-50AA-4TI CF97-50AA-6TI CF97-50AA-3TI
50pF±15% CF97-50AB-4TI CF97-50AB-6TI CF97-50AB-3TI
100pF±15% CF97-50AC-4TI CF97-50AC-6TI CF97-50AC-3TI
220pF±15% CF97-50AD-4TI CF97-50AD-6TI CF97-50AD-3TI
470pF±15% CF97-50AE-4TI CF97-50AE-6TI CF97-50AE-3TI
820pF±15% CF97-50AF-4TI CF97-50AF-6TI CF97-50AF-3TI
1,000pF±15% CF97-50AH-4TI CF97-50AH-6TI CF97-50AH-3TI
1,200pF±15% CF97-50AJ-4TI CF97-50AJ-6TI CF97-50AJ-3TI
None (Connector Saver) CF97-50AA-4TB CF97-50AA-6TB CF97-50AA-3TB
50pF±15% CF97-50AB-4TB CF97-50AB-6TB CF97-50AB-3TB
100pF±15% CF97-50AC-4TB CF97-50AC-6TB CF97-50AC-3TB
220pF±15% CF97-50AD-4TB CF97-50AD-6TB CF97-50AD-3TB
470pF±15% CF97-50AE-4TB CF97-50AE-6TB CF97-50AE-3TB
820pF±15% CF97-50AF-4TB CF97-50AF-6TB CF97-50AF-3TB
1,000pF±15% CF97-50AH-4TB CF97-50AH-6TB CF97-50AH-3TB
1,200pF±15% CF97-50AJ-4TB CF97-50AJ-6TB CF97-50AJ-3TB
Filtered Panel Mount Feedthrough Adapter
Filtered Ribbon Panel Mount Adapters provide filtered I/O in systems where internal cabling carries signals to the system panel.
By filtering r ight at the panel, EMI that could otherwise be generated over the length of the internal cable is prevented. The use of
a plug/socket adapter also yields a benefit in ser viceability. Should it ever be necessary to replace the filter, an adapter can be
readily replaced without replacing a bulky, more expensive cable assembly.
The adapter must be grounded to the system panel through the mounting hardware, which extends to both plug and socket
flanges; thus, the adapter may be mounted with either side to the panel.
Adapters are also available without filter capacitors. Often referred to as “connector savers”, these devices are most useful as
“throw away” intermediate interconnects in applications where numerous mating/unmating cycles are required.
See page 6-51 for accessories such as bent bail latches, dust covers, and mounting screws that make the use of Cinch Miniature
Ribbon Filtered Adapters even more cost-effective in panel mount-applications.
Socket without
latches
Socket with
InstaLatches
Socket with
Bail latches
6-51
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Accessories
Part No. Description Typical Applications
4-40UNC2AX11/32 #4-40 x .343 Pan Head Screw • SUPERIBBON to mate with female screwlock
• PC Mount connector to PCB (secured from rear)
4-40UNC2AX17/32 #4-40 x .525 Pan Head Screw • SUPERIBBON to threaded panel
4-40UNC2AX5/8 #4-40 x .625 Fillister Head Screw • Metal Shell Running Cable (included on
standard end-entry metal shell products)
4-40UNC2AX3/4 #4-40 x .750 Pan Head Screw • SUPERIBBON Running Cable (included on
standard end-entry SUPERIBBON products)
• SUPERIBBON to front-panel mounted
SUPERIBBON held by panel clips
4-40UNC2AX7/8 #4-40 x .875 • Miscellaneous
4-40X1/4SPCR Hex Spacer, #4-40 Internal Thread x .250 • Female Screwlock
The following accessories are available to make your application using Cinch Miniature Ribbon and SUPERIBBON prod-
ucts as complete and cost-effective as possible.
Dust Covers for all Metal Shell and All-Plastic Miniature Ribbon Connectors
Dust covers may be added to Miniature Ribbon or SUPERIBBON assemblies to protect
the mating area from damage or contamination when the connector is left unmated. They
can be useful for protection from handling damage during assembly, or can be left on the
connector for protection of unused system I/O por ts.
Compliant-pin Miniature Ribbon products come with special seating fixtures that must be
used to install the connectors onto the printed circuit board. These may be replaced after
inser tion; however, with standard dust covers to maintain the standard color code, if so
desired. Material: UL94V-0 rated polyethelene (blue for plug covers; red for socket covers)
Ordering Information, Dust Covers
Size Plug Cover Socket Cover
14 57-1001 57-1002
24 57-1003 57-1004
36 57-1005 57-1006
50 57-1008 57-1022
64 57-1009 57-1010
Bent Bail Latch for End-Entry Applications
Standard Bail Latches will not lock under a plug cable in a typical end-entr y
application. This latch, which is bent at a 90° angle, may be used to
replace a standard latch in this situation.
Material: Stainless Steel
Ordering Information, Bent Bail Latch
Par t No. 57-BL-90
Mounting Screws and Related Hardware
Many Cinch Miniature Ribbon and SUPERIBBON products include all the hardware required for the most common appli-
cation for the product; however, these alternatives may be desirable to better fit product to a specific use.
6-52
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Accessories
Wire Restraints for Panel-Mount SUPERIBBON™ All-Plastic Connectors
Wire restraints provide added security to terminated wires, preventing radial
pullout. They are intended for use on panel mounted connectors where hoods
are not required (wire restraints cannot be applied simultaneously with hoods),
and snap on after connector termination.
Material: Gray UL94V-0 rated polyester.
Ordering Information, SUPERIBBON Wire Restraints
(Two restraints required per connector)
Size Plug Socket
14 97-WR-P14 97-WR-S14
24 97-WR-P24 97-WR-S24
36 97-WR-P36 97-WR-S36
50 97-WR-P50 97-WR-S50
64 97-WR-P64 97-WR-S64
Wire Restraints for Panel-Mount Miniature Ribbon Metal Shell Connectors
Metal Shell Wire Restraints serve the same purpose as their SUPERIBBON
counter par ts, but are for IDC terminated metal shell connectors. These one-
piece restraints snap in place around the termination area after assembly.
Material: Blue UL94V-0 rated polyester.
Ordering Information, Miniature Ribbon Wire Restraints
(One restraint required per connector)
Size Plug or Socket
36 77-WR-36
50 77-WR-50
Panel Mounting Clips for All-Plastic Miniature Ribbon Connectors
These clips slip into each end of a modified panel cutout, and allow all-plastic
Miniature Ribbon connectors to be snapped into place and securely front-
mounted to the panel with no additional hardware.Threaded holes are not
required in the panel, and connectors can be loaded without needing access
to the rear of the panel.
Material: Steel
Finish: Tin-cadmium/clear chromate
Ordering Information, Panel Mounting Clips
(Two clips required per connector)
Chassis Panel Clip
Thickness Par t Number
.062" (1.57mm) 97-MC-062
.093" (2.36mm) 97-MC-093
.125" (3.18mm) 97-MC-125
Dimensions BK
Size in mm in mm
14 1.417 35.99 1.060 26.92
24 1.842 46.79 1.485 37.72
36 2.352 59.74 1.995 50.67
50 2.947 74.85 2.590 65.79
64 3.542 89.97 3.185 80.90
B
K
6-53
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Accessories
Wire Restraint with Integral Panel Clip
This accessor y for All-Plastic Miniature Ribbon products combines the Wire
Restraint and Panel Mounting Clip into one molded device. Available only
for 50 position size connectors, it provides a significant material and labor
cost savings compared to alternate mounting methods.
Material: Gray UL94V-0 rated polyester.
Ordering Information,Wire Restraint with Integral Panel Clip
(Two required per connector)
Chassis Panel Clip
Thickness Part Number
.062" (1.57mm) 97-WRC-062
.093" (2.36mm) 97-WRC-093
Hoods for SUPERIBBON Connectors
180° (Top-Entr y) Hoods can be used with panel-mount All-Plastic
SUPERIBBON connectors to provide strain relief and protection of the
wire terminations. The two-piece snap-on assembly has adjustable tabs
that allow effective strain relief on a wide range of cable sizes.
90°/270° (End-Entr y) Hoods are for replacement on End-Entry
SUPERIBBON connectors. They are available for all sizes, as well as
for the pointed-nose 50 position size.
Note: End-Entr y Hoods cannot
be added to panel-mount connectors because the finished assembly would
not have the end-entry cable grip. See pages 6-10 thru 6-13 for complete
end-entr y connectors.
Material: Gray UL94V-0 rated polyester.
Ordering Information, Hoods for All-Plastic Miniature Ribbon
Size 180° (Top-Entr y) 90°/270° (End-Entry)
14 97-14-180 97-14-90
Square 24 97-24-180 97-24-90
Nose 36 97-36-180 97-36-90
50 97-50-180 97-50-90
64 97-64-180 97-64-90
Pointed Nose 50 - 97-50-90P
6-54
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Application Tools
A full range of tooling is available to make the use of Cinch Miniature Ribbon and
SUPERIBBON™ products as cost-effective as possible. From hand repair tools to
the high production rate Auto-ClinchTM termination tool, Cinch has the tool to fit
your needs.
Auto-Clinch Model 200S Termination Tool
Auto-Clinch is a semi-automatic Connector Ter mination Machine that ter minates
IDC connectors pair-by-pair. The basic machine comes equipped ready to ter minate
50-position end-entr y Miniature Ribbon or SUPERIBBON connectors, which it can do
in approximately 1.5 minutes.
The Auto-Clinch is pneumatically powered and requires a min. 60psi air supply. It is electr ically controlled, and requires a 117V,
60Hz Single Phase electrical circuit (5 Amps). Weight: 120 lbs. (54.48kg.), Dimensions: 25.5" (64.77cm.) wide; 20" (50.8cm) deep; 9"
(22.86cm) high.
Note: These specifications may change with the addition of certain options.
Order Part No. AC-371
Several options are available that make the Auto-Clinch a versatile application tool:
• Remote Visual Color Display shows wire color codes. It can be used to train new operators or to assist the operator in
terminating non-standard wire sequences. Part No. ACO-482
• The Selective Programmer allows the operator to set the machine to skip over positions that are not to be ter minated, thus
speeding up the termination process. Part No. ACO-495
• The End-Entry Cable Clamp closer automatically closes the cable clamp on end-entry SUPERIBBON or SuperShield
connectors as they are terminated. Part No. ACO-374
A power assist for this device is also available. Part No. ACO-405
• The Top-Entr y Adapter dresses the wires during ter mination such that they are properly aligned for exit through a Top-Entry
hood. Par t No. ACO-218
NOTE: Auto-ClinchTM cannot be equipped with both Cable Clamp Closer and Top-Entry Adapter simultaneously.
• Inser tion Blades are included for terminating solid wire. For replacement, order Par t No. ACB-443
To ter minate stranded wire, order stranded-wire blades, Part No. ACB-872
• Nests for Panel Mount and Top-Entr y Ribbon Connectors, and All Plastic SUPERIBBON connectors allow the use of
Auto-Clinch to ter minate other IDC Ribbon Connectors:
For All-Plastic IDC Connectors For Metal-Shell IDC Connectors
Connector Panel Mount/Top-Entry Top-Entry Plug
Size End-Entry Top-Entry End-Entry Sockets Plugs With Hood*
14 ACEN-850 ACTN-568 - ACMN-231 - ACMN-232
24 ACEN-851 ACTN-569 - ACMN-229 - ACMN-230
36 ACEN-852 ACTN-797 - ACMN-228 ACMN-203 ACMN-227
50 ACEN-853 ACTN-798 ACMN-484 ACMN-527 ACMN-858 ACMN-526
64 ACEN-570 ACTN-799 - - - -
* For Bail-Latch plugs with hood where hood forms rear of connector body, i.e., 77-32500.
For overmold kits, use panel mount/top-entry plug nests.
AutoClinchis a trademark of Cinch Connector Division of Labinal Components & Systems, Inc.
6-55
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Application Tools
Certi-Clinch™Portable T ermination T ool
Cer ti-Clinch is a por table, manually operated tool that ter minates Cinch all-
plastic and metal shell Miniature Ribbon connectors with discrete-wire IDC
contacts. It is designed for field use assembling cables on-site, yet is efficient
enough to fit well into lower-volume factory assembly operations.
Its 10.5 lb. (4.77Kg) weight and versatile configuration make it readily por table
for field use, and allow temporar y use with vir tually no setup time to handle peak
demands in factor y environments. A leather case is available for carr ying
Cer ti-Clinch onto a job site or for storing Cer ti-Clinch in the factory when not
being used.
Cer ti-Clinch measures 6" (15.24cm) wide x 13" (33.02cm) long x 6.5" (16.5cm) high.
Ordering Information, Cer ti-Clinch
Model Description
SCT-330 Cer ti-Clinch Tool with 25-pair nest, for Solid Wire
SCT-335 Cer ti-Clinch Tool with 32-pair nest, for Solid Wire
SCT-360 Cer ti-Clinch Tool with 25-pair nest, for Stranded Wire
SCT-342 Kit to conver t 25-pair tool to 32-pair operation
SCT-343 Kit to conver t 32-pair tool to 25-pair operation
SCT-645 Inser tion Blades to convert 25-pair tool to Stranded Wire
SCT-038 Inser tion Blades to convert 32-pair tool to Stranded Wire
SCT-649 Carr ying Case for all Certi-Clinch Tools
Handi-Clinch™Hand T ermination T ool
This hand-operated tool terminates wires individually to Cinch SUPERIBBON™ and
metal shell Miniature Ribbon IDC connectors. Its integral nest holds the connector
in place during use. Part No. HCTT-539
Versa-Clinch™Multi-Function Hand Tool
This versatile tool performs four basic functions in applying Cinch SUPERIBBON
and metal shell Miniature Ribbon products:
• Ter minate individual wires to the IDC contact
• Unlatch the hood for removal on end-entr y SUPERIBBON products
• Open and close the cable clamp on SUPERIBBON and SuperShield
• Unlock InstaLatches to unmate connectors
Par t No.VCTT-361
6-56
6
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Application Tools
Termination Repair Pliers
These plier type tools allow you to rework misterminated cable assemblies and/or perform
specialized termination operations. They terminate wires individually into Cinch IDC
contacts. Repair Pliers for Standard Termination: Part No. SRT-345
Repair Pliers for Half-Tap (Daisy-Chaining) allows you to terminate one wire to multiple
contacts to shor t contacts together, or even to two separate connectors to make back/
back connections, etc. Part No. HT-560
InstaLatch™ Unlatching Tool
While InstaLatches may be unlocked with something as simple as a center punch
or ballpoint pen, this tool provides a “hooked” end that allows you to unlock
InstaLatches even in tight areas. Part No. UT-304
Crimping Tools for Overmold Kit Ferrules
Two model tools are available to crimp ferrules onto overmold kits:
•Pneumatically powered bench-top press, which is por table so it
can be placed in storage when not required. Part No. FCT-551
•Hand-operated crimping tool, satisfactory for lower-volume applications.
Par t No. FCT-552
Both tools use the same crimp dies. Select the crimp die(s) below for the particular
ferrule being used (ferrules shown on page 6-22).
Crimp Die Crimp Ferrule
Par t No. Part No.
CD08 CF57
CD09 CF60
CD10 CF64
