GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS Introduction fo FPV Series Multilayer Chip Varistor Multilayer Chip Varistors (MLV) are Transient Voltage Suppressors (TVS) which manufactured from semiconducting ceramics by the highly advanced multilayer formation technologies, which can offer rugged protection, excellent transient energy absorption and internal heat dissipation. The devices are leadless chip form, eliminating lead inductance and guaranteeing a faster speed of response time of less than 0.5ns, which makes them fast enough to ensure reliable protection against ESD pulse and other specific transient events. These transient suppression devices are significantly smaller footprints and lower profiles than traditional zener diodes or radial MOVs. Section of the chip Features l l l l l l l l l l Multilayer Ceramic Construction Technology Leadless 1005[0402], 1608[0603], 2012[0805], 3216[1206], 3225[1210], 4532[1812], 8063[3225] and 1080[4032] Chip Size -55C to +125C Operating Temperature Range Operating Voltage Range Vw(DC) =3.3V to 615V Inherent Bi-directional Clamping Suitable for ESD Protection Very Low Leakage Current Low Inductance, Fast Response (Response time<0.5ns) Excellent Temperature Coefficient Good Solderability (The electrode termination is selectable in plated and silver /palladium/platinum.) Information for Designer Voltage Dependent Characteristic Transient Voltage Suppressors (Varistors) are voltage-dependent electrical resistors with symmetrical V/I characteristic. Their resistance value decrease with increasing voltage, thus "short-circuiting"further rises in overvoltage. 49 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS Terms and Descriptions Working DC Voltage (Vw(DC)) This is the maximum continuous DC voltage, which may be applied up to the maximum operating temperature of the device. The rated DC operating voltage (working voltage) is also used as the reference point for leakage current. This voltage is always less than the breakdown voltage of the device. Working AC Voltage (Vw(AC)) This is the maximum continuous sinusoidal rms voltage, which maybe applied at any temperature up to the maximum operating temperature of the device. Maximum Surge Current (Peak Current IP ) This is the maximum peak current, which may be applied for an 8/20s impulse, with rated line voltage also applied, without causing device failure. The pulse can be applied to the device in either polarity with the same confidence factor. Maximum Surge Energy (Es) This is the maximum rated transient energy which may be dissipated for a single current pulse at a specified impulse duration (10/1000s), with the rated DC or RMS voltage applied, without causing device failure. leakage (I L ) at Rated DC Voltage In the no conducting mode, the device is at a very high impedance (approaching 109ohms) and appears as an almost open circuit in the system. The leakage current drawn at this level is very low (<50A at ambient temperature) and, unlike the zener diode, the multilayer varistors have the added advantage that, when operated up to its maximum temperature, its leakage current will not increase above 500A. Varistor Voltage (VB (DC)) This is the voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. The voltage is usually characterized at the 1mA point. Clamping Voltage (Vc) This is the peak voltage appearing across the suppressor when measured at conditions of specified pulse current and specified waveform (8/20s). It is important to note that the peak current and peak voltage may not necessarily be coincidental in time. Capacitance (Cp) This is the capacitance of the device at a specified frequency 1MHz and bias 0.5V Application The Prevention of Overvoltage When the voltage increases above the threshold of MLV, the suppressor will draws a rapidly increasing current, and then the overvoltage is considerably attenuated away from the protection of the equipments should be supplemented by including specific components that will raise the withstand capabilities to the required level. Varistors provide protection against all kind of overvoltage and prevent electronic equipment from being damaged by transient events. 50 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS Specific Application l Suppression of Inductive Switching or Other Transient Events Such as EFT and Surge Voltage at the Circuit Board Level. Protection of Components and Circuits Sensitive to ESD Transients Occurring on Power supplies, Control and Signal Lines. Provides On-Board Transient Voltage Protection for ICs, CMOS and MOSFET. Replace Larger Surface Mount TVS Zeners in Many Applications Used to Help Achieve Electromagnetic Compliance of End Products l l l l Part Number Identification Multilayer Chip Varistor FPV 160808 G 3R3 P M T Dimensions (LxWxT) Product Code FPV Multilayer Product Series (mm) 100505 1.0x0.5x0.5 160808 1.6x0.8x0.8 Termina- Voltage tion E P Plated High energy Chip Varistor Working DC Packaging Tolerance Style K 10% L 15% T M 20% B absorb type 201209 2.0x1.2x0.9 321611 3.2x1.6x1.1 322513 3.2x2.5x1.3 453215 4.5x1.6x1.6 453225 4.5x3.2x2.5 8063 8.0x6.3 1080 10.2x8.0 S Genera 3.3V 250 24V S Non-plated Pt/Pd/Ag type G High speed type unitmm(inch) Part No. 100505 (0402) 160808 (0603) 201209 (0805) 201212 (0805) 321611 (1206) 321609 (1206) 322513 (1210) 451616 (1806) 453225 (1812) 8063 1080 L 1.00.15 (0.0400.006) 1.60.2 (0.0630.008) 2.00.2 (0.0790.008) 2.00.2 (0.0790.008) 3.20.2 (0.1260.008) 3.20.2 (0.1260.008) 3.20.2 (0.1260.008) 4.50.2 (0.1860.008) 4.50.2 (0.1800.008) 8.00.3 (0.30.012) 10.20.3 (0.1000.012) W 0.50.15 (0.0200.006) 0.80.2 (0.0310.008) 1.20.2 (0.0470.008) 1.20.2 (0.0470.008) 1.60.2 (0.0630.008) 1.60.2 (0.0630.008) 2.50.2 (0.0980.008) 1.60.2 (0.0630.008) 3.20.2 (0.1260.008) 6.30.3 (0.2500.012) 8.00.3 (0.3200.012) 51 e & Reel 3R3 Shape And Dimensions & Equivalent circuit Equivalent circuit Tap T 0.50.15 (0.0200.006) 0.80.2 (0.0310.008) 0.90.2 (0.0350.008) 1.20.2 (0.0470.008) 1.10.2 (0.0430.008) 0.90.2 (0.0350.008) 1.30.2 (0.0510.008) 1.60.2 (0.0630.008) 2.50.2 (0.1000.008) 1.0~2.5 (0.050~0.100) 1.0~2.5 (0.050~0.100) D 0.250.10 (0.0100.004) 0.30.2 (0.010.008) 0.50.3 (0.0200.012) 0.50.3 (0.0200.012) 0.50.3 (0.0200.012) 0.50.3 (0.0200.012) 0.50.3 (0.0200.012) 0.50.3 (0.0200.012) 0.50.3 (0.0200.012) 0.70.3 (0.0280.012) 0.70.3 (0.0280.012) Bulk GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS Multilayer Chip Varistor Array CAV 3216-4 G 3R3 P M T Working DC Termination Dimensions (LxWxT) Product Code (mm) CV 3216 A Product Series 3.2x1.6x0.9 Voltage P 2010 Chip 2.0x1.0x0.5 Varistor G Plated type Multilayer Genera type Packagin Tolerance High Speed S 3R3 3.3V 250 24V S Non-plat K 10% L 15% M 20% g Style Tap T Reel ed B Pt/Pd/Ag Aarry Shape And Dimensions & Equivalent circuit unitmm(inch) Part No. 2010 (0804) 3216 (1206) L W T E1 E2 D 2.00.15 (0.0790.008) 3.20.2 (0.1260.008) 1.00.15 (0.0390.006) 1.60.2 (0.0630.008) 0.50.1 (0.0350.008) 0.90.1 (0.0350.008) 0.20+0.15/-0.1 (0.010+0.006/-0.004) 0.350.2 (0.0140.008) 2.00.15 (0.0790.006) 0.30.2 (0.0120.008) 2.00.15 (0.0790.006) 0.80.1 (0.0310.004) Multilayer Chip Varistor General Series General Series is a major series of FPV Mulitlayer Chip Varistors (MLV), which can provide widely working voltage, high reliability and suppress varies transient event l Protection from transient voltage noise in all kinds of IC l Protection from ESD, EFT and surge in power I/O port l Replacement of zener diode 52 e & Bulk GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS 1005 (0402) TYPE Working voltage 1005 PART Number DC AC Varistor voltage @1mA DC Maximum Clamping Voltage 8/20 s 1A Volts Energy Absorb 10/1000 s Peak Current 8/20s Typical Joules Volts pF Capacitance @1MHz Volts Volts VB VB FPV100505G3R3M 3.3 2.5 5 20% 10 0.05 20 450 FPV100505G5R6M 5.6 4 8 20% 15.5 0.05 20 360 FPV100505G8R0M 8 5.7 12 20% 20 0.05 20 300 FPV100505G9R0L 9 6.4 13 15% 20 0.05 20 230 FPV100505G110L 11 7.8 16 15% 25 0.05 20 180 FPV100505G120L 12 8.5 18 15% 25 0.05 20 150 FPV100505G140L 14 10 20 15% 30 0.05 20 120 FPV100505G160K 16 11.3 22 10% 35 0.05 20 100 FPV100505G180K 18 12.7 25 10% 40 0.05 20 90 Energy Absorb 10/1000 s Peak Current 8/20s Joules 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 Volts 30 30 30 30 30 30 30 30 30 30 30 30 30 Energy Absorb 10/1000 s Peak Current 8/20s Joules 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 Volts 40 40 40 40 35 35 35 35 35 35 35 35 35 1608 (0603) TYPE Working voltage 1608 PART Number FPV160808G3R3M FPV160808G5R6M FPV160808G8R0M FPV160808G9R0L FPV160808G110L FPV160808G120L FPV160808G140L FPV160808G160K FPV160808G180K FPV160808G220K FPV160808G240K FPV160808G260K FPV160808G300K DC Volts 3.3 5.6 8 9 11 12 14 16 18 22 24 26 30 AC Volts 2.5 4 5.7 6.4 7.8 8.5 10 11.3 12.7 15.6 17 18.4 21.2 Varistor voltage @1mA DC VB 5 8 12 13 16 18 20 22 25 30 33 36 42 VB 20% 20% 20% 15% 15% 15% 15% 10% 10% 10% 10% 10% 10% Maximum Clamping Voltage 8/20 s 1A Volts 10 15.5 20 20 25 25 30 35 40 50 54 58 65 Typical Capacitance @1MHz pF 1230 825 600 550 500 480 430 300 230 180 170 160 150 2012 (0805) TYPE Working voltage 2012 PART Number FPV2012G3R3M FPV2012G5R6M FPV2012G8R0M FPV2012G9R0L FPV2012G110L FPV2012G120L FPV2012G140L FPV2012G160K FPV2012G180K FPV2012G220K FPV2012G240K FPV2012G260K FPV2012G300K DC Volts 3.3 5.6 8 9 11 12 14 16 18 22 24 26 30 AC Volts 2.5 4 5.7 6.4 7.8 8.5 10 11.3 12.7 15.6 17 18.4 21.2 Varistor voltage @1mA DC VB 5 8 12 13 16 18 20 22 25 30 33 36 42 VB 20% 20% 20% 15% 15% 15% 15% 10% 10% 10% 10% 10% 10% 53 Maximum Clamping Voltage 8/20 s 1A Volts 10 15.5 20 20 25 25 30 35 40 50 54 58 65 Typical Capacitance @1MHz pF 930 860 620 580 500 450 400 300 280 220 180 110 80 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS 3216 (1206) TYPE Working voltage 3216 PART Number DC AC Varistor voltage @1mA DC Maximum Clamping Voltage 8/20 s 1A Volts Energy Absorb 10/1000 s Peak Current 8/20s Typical Joules Volts pF Capacitance @1MHz Volts Volts VB VB FPV3216G3R3M 3.3 2.5 5 20% 10 0.1 40 1500 FPV3216G5R6M 5.6 4 8 20% 15.5 0.1 40 870 FPV3216G8R0M 8 5.7 12 20% 20 0.1 40 650 FPV3216G9R0L 9 6.4 13 15% 20 0.1 40 630 FPV3216G110L 11 7.8 16 15% 25 0.1 35 600 FPV3216G120L 12 8.5 18 15% 25 0.1 35 560 FPV3216G140L 14 10 20 15% 30 0.1 35 500 FPV3216G160K 16 11.3 22 10% 35 0.1 35 450 FPV3216G180K 18 12.7 25 10% 40 0.1 35 400 FPV3216G220K 22 15.6 30 10% 50 0.1 35 300 FPV3216G240K 24 17 33 10% 54 0.1 35 270 FPV3216G260K 26 18.4 36 10% 58 0.1 35 250 FPV3216G300K 30 21.2 42 10% 65 0.1 35 225 FPV3216G330K 33 23.3 45 10% 72 0.1 35 200 FPV3216G380K 38 27 51 10% 77 0.1 35 150 FPV3216G420K 42 30 56 10% 86 0.1 35 120 FPV3216G480K 48 34 62 10% 100 0.1 35 90 FPV3216G560K 56 40 72 10% 110 0.1 35 80 FPV3216G600K 60 45 76 10% 120 0.1 35 70 FPV3216G680K 68 48 86 10% 130 0.1 35 60 54 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS Multlayer Chip Varistor High Energy Absorb Series High Energy Absorb Series is design to absorb the high energy transient voltage in circuit, which provide high rate current, highly energy absorb ability and fast response speed Application l Suppression of Inductive Switching or Other Transient Events Such as EFT and Surge Voltage at the Circuit Board Level. l Protection of Components and Circuits Sensitive to ESD Transients Occurring on Power supplies, Control and Signal Lines. l Provides On-Board Transient Voltage Protection for ICs, CMOS and MOSFET. l Replace Larger Surface Mount TVS Zeners in Many Applications 2012 (0805) TYPE Working voltage 2012 PART Number FPV2012E3R3M FPV2012E5R6M FPV2012E8R0M FPV2012E9R0L FPV2012E110L FPV2012E120L FPV2012E140L FPV2012E160K FPV2012E180K FPV2012E220K FPV2012E240K FPV2012E260K FPV2012E300K DC Volts 3.3 5.6 8 9 11 12 14 16 18 22 24 26 30 AC Volts 2.5 4 5.7 6.4 7.8 8.5 10 11.3 12.7 15.6 17 18.4 21.2 Varistor voltage @1mA DC VB 5 8 12 13 16 18 20 22 25 30 33 36 42 VB 20% 20% 20% 15% 15% 15% 15% 10% 10% 10% 10% 10% 10% Maximum Clamping Voltage 8/20 s 1A Volts 14 16 24 25 27 28 30 35 40 47 50 54 65 Energy Absorb 10/1000 s Peak Current 8/20s Joules 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 Volts 120 120 120 120 120 120 120 120 100 100 100 100 100 Energy Absorb 10/1000 s Peak Current 8/20s Joules 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Volts 150 150 150 150 150 150 150 150 150 150 150 120 120 120 120 120 120 120 120 120 Typical Capacitance @1MHz pF 4000 2400 1700 1500 1000 920 820 600 500 350 270 190 150 3216(1206) TYPE Working voltage 3216 PART Number FPV3216E3R3M FPV3216E5R6M FPV3216E8R0M FPV3216E9R0L FPV3216E110L FPV3216E120L FPV3216E140L FPV3216E160K FPV3216E180K FPV3216E220K FPV3216E240K FPV3216E260K FPV3216E300K FPV3216E330K FPV3216E380K FPV3216E420K FPV3216E480K FPV3216E560K FPV3216E600K FPV3216E680K DC Volts 3.3 5.6 8 9 11 12 14 16 18 22 24 26 30 33 38 42 48 56 60 68 AC Volts 2.5 4 5.7 6.4 7.8 8.5 10 11.3 12.7 15.6 17 18.4 21.2 23.3 27 30 34 40 45 48 Varistor voltage @1mA DC VB 5 8 12 13 16 18 20 22 25 30 33 36 42 45 51 56 62 72 76 86 VB 20% 20% 20% 15% 15% 15% 15% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 55 Maximum Clamping Voltage 8/20 s 1A Volts 14 16 24 25 27 28 30 35 40 47 50 54 65 72 77 86 100 110 120 130 Typical Capacitance @1MHz pF 3800 2300 1800 1700 1300 1200 900 780 635 550 500 450 400 350 300 250 185 165 150 135 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS 3225(1210) TYPE Working voltage 3225 PART Number FPV3225E180K FPV3225E220K FPV3225E240K FPV3225E260K FPV3225E300K FPV3225E330K FPV3225E380K FPV3225E420K FPV3225E480K FPV3225E560K FPV3225E600K FPV3225E680K DC Volts 18 22 24 26 30 33 38 42 48 56 60 68 AC Volts 12.7 15.6 17 18.4 21.2 23.3 27 30 34 40 45 48 Varistor voltage @1mA DC VB 25 30 33 36 42 45 51 56 62 72 76 86 VB 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Maximum Clamping Voltage 8/20 s 1A Volts 38 47 50 54 65 70 77 90 100 110 120 135 Energy Absorb 10/1000 s Peak Current 8/20s Joules 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Volts 300 300 300 280 280 280 280 280 280 250 250 250 Energy Absorb 10/1000 s Peak Current 8/20s Joules 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Volts 500 500 500 500 500 500 500 500 500 500 500 500 Energy Absorb 10/1000 s Peak Current 8/20s Joules 0.3 0.4 0.5 0.6 0.7 0.9 1.1 1.3 1.8 2.2 2.5 3.4 3.6 Volts 100 100 100 100 100 100 100 100 400 400 400 400 400 Typical Capacitance @1MHz pF 2400 2150 1980 1800 1860 1600 1300 1000 510 450 420 360 4532(1812) TYPE Working voltage 4532 PART Number FPV453215E180K FPV453215E220K FPV453215E240K FPV453215E260K FPV453215E300K FPV453215E330K FPV453215E380K FPV453215E420K FPV453215E480K FPV453215E560K FPV453215E600K FPV453215E680K DC Volts 18 22 24 26 30 33 38 42 48 56 60 68 AC Volts 12.7 15.6 17 18.4 21.2 23.3 27 30 34 40 45 48 Varistor voltage @1mA DC VB 25 30 33 36 42 45 51 56 62 72 76 86 VB 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Maximum Clamping Voltage 8/20 s 1A Volts 38 47 50 54 65 70 77 90 100 110 120 135 Typical Capacitance @1MHz pF 4500 4000 3500 3000 2500 2200 2000 1800 1500 1000 750 500 8063(3225) TYPE Working voltage 8063 PART Number FPV8063E14K FPV8063E18K FPV8063E22K FPV8063E26K FPV8063E31K FPV8063E38K FPV8063E45K FPV8063E56K FPV8063E65K FPV8063E85K FPV8063E100K FPV8063E125K FPV8063E150K DC Volts 14 18 22 26 31 38 45 56 65 85 100 125 150 AC Volts 11 14 17 20 25 30 35 40 50 60 75 95 115 Varistor voltage @1mA DC VB 18 22 27 33 39 47 56 68 82 100 120 150 180 VB 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 56 Maximum Clamping Voltage 8/20 s 1A Volts 36@1A 43@1A 53@1A 65@1A 77@1A 93@1A 110@1A 135@1A 135@5A 165@5A 200@5A 250@5A 300@5A Typical Capacitance @1MHz pF 1750 1450 1200 980 850 720 620 520 300 250 210 135 110 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD Working voltage 8063 PART Number FPV8063E170K FPV8063E180K FPV8063E200K FPV8063E225K FPV8063E300K FPV8063E320K FPV8063E350K FPV8063E385K DC Volts 170 180 200 225 300 320 350 385 AC Volts 130 140 150 175 230 250 275 300 SMD COMPONENTS Varistor voltage @1mA DC VB 205 220 240 270 360 390 430 470 VB 10% 10% 10% 10% 10% 10% 10% 10% Maximum Clamping Voltage 8/20 s 1A Volts 340@5A 360@5A 395@5A 455@5A 595@5A 650@5A 710@5A 775@5A Energy Absorb 10/1000 s Peak Current 8/20s Joules 4.2 4.5 4.9 5.6 7.2 8.2 8.6 9.6 Volts 400 400 400 400 400 400 400 400 Energy Absorb 10/1000 s Peak Current 8/20s Typical Capacitance @1MHz pF 100 95 90 75 60 55 50 45 1080(4032) TYPE Working voltage 1080 PART Number DC AC Varistor voltage @1mA DC Maximum Clamping Voltage 8/20 s 1A Volts Volts VB VB Volts Joules FPV1080E14K 14 11 18 10% 36@2.5 0.8 FPV1080E18K 18 14 22 10% 43@2.5 0.9 FPV1080E22K 22 17 27 10% 53@2.5 1.1 FPV1080E26K 26 20 33 10% 65@2.5 1.3 FPV1080E31K 31 25 39 10% 77@2.5 1.6 FPV1080E38K 38 30 47 10% 93@2.5 2.0 FPV1080E45K 45 35 56 10% 110@2.5 2.5 FPV1080E56K 56 40 68 10% 135@2.5 3.0 FPV1080E65K 65 50 82 10% 135@10A 4.2 FPV1080E85K 85 60 100 10% 165@10A 4.8 FPV1080E100K 100 75 120 10% 200@10A 5.9 FPV1080E125K 125 95 150 10% 250@10A 7.6 FPV1080E150K 150 115 180 10% 300@10A 8.4 FPV1080E170K 170 130 205 10% 340@10A 9.5 FPV1080E180K 180 140 220 10% 360@10A 10.0 FPV1080E200K 200 150 240 10% 395@10A 11.0 FPV1080E225K 225 175 270 10% 455@10A 13.0 FPV1080E300K 300 230 360 10% 595@10A 17.0 FPV1080E320K 320 250 390 10% 650@10A 19.0 FPV1080E350K 350 275 430 10% 710@10A 21.0 FPV1080E385K 385 300 470 10% 775@10A 23.0 FPV1080E615K 615 460 750 10% 1240@10A 36.0 Remark: The working DC voltage of 8063 and 1080 part number are identified as: 18------18V Typical Capacitance @1MHz Volts pF 250 2750 250 2300 250 1900 250 1600 250 1400 250 1200 250 1050 250 900 1200 530 1200 480 1200 430 1200 260 1200 220 1200 200 1200 180 1200 170 1200 150 1200 115 1200 105 1200 95 1200 90 1200 55 225-----225V Multilayer Chip Varistor High Speed Series The Multilayer High-Speed Series is a very low capacitance extension to the FPV family of Transient Voltage Suppressor available in 1005,1608 and 2012 surface mount chip. The High Speed series provides protection from ESD and EFT in high speed data-line and other high frequency applications. l Data, Diagnostic I/O Ports l Universal Serial Bus (USB) l Video & Audio Ports l Portable/Hand-Held Products l Mobile Communications/Cellular Phones l Computer/DSP Products l Industrial Instruments Including Medical 57 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS 1005(0402) TYPE Working voltage 1005 PART Number FPV100505S3R3M FPV100505S5R6M FPV100505S8R0M FPV100505S9R0L FPV100505S110L FPV100505S120L FPV100505S140L FPV100505S160K FPV100505S180K DC Volts 3.3 5.6 8 9 11 12 14 16 18 AC Volts 2.5 4 5.7 6.4 7.8 8.5 10 11.3 12.7 Varistor voltage @1mA DC VB 5 8 12 13 16 18 20 22 25 VB 20% 20% 20% 15% 15% 15% 15% 10% 10% Maximum Clamping Voltage 8/20 s 1A Volts 10 15.5 20 20 25 25 30 35 40 Energy Absorb 10/1000 s Peak Current 8/20s Joules 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 Volts 20 20 20 20 20 20 20 20 20 Energy Absorb 10/1000 s Peak Current 8/20s Joules 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 Volts 20 20 20 20 20 20 20 20 20 20 20 20 20 Energy Absorb 10/1000 s Peak Current 8/20s Joules 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 Volts 20 20 20 20 20 20 20 20 20 20 20 20 20 Typical Capacitance @1MHz pF 70 45 30 26 24 20 18 15 15 1608(0603) TYPE Working voltage 1608 PART Number FPV2012S3R3M FPV2012S5R6M FPV2012S8R0M FPV2012S9R0L FPV2012S110L FPV2012S120L FPV2012S140L FPV2012S160K FPV2012S180K FPV2012S220K FPV2012S240K FPV2012S260K FPV2012S300K DC Volts 3.3 5.6 8 9 11 12 14 16 18 22 24 26 30 AC Volts 2.5 4 5.7 6.4 7.8 8.5 10 11.3 12.7 15.6 17 18.4 21.2 Varistor voltage @1mA DC VB 5 8 12 13 16 18 20 22 25 30 33 36 42 VB 20% 20% 20% 15% 15% 15% 15% 10% 10% 10% 10% 10% 10% Maximum Clamping Voltage 8/20 s 1A Volts 10 15.5 20 20 25 25 30 35 40 50 54 58 65 Typical Capacitance @1MHz pF 220 140 100 90 70 60 55 50 45 40 35 30 25 2012(0805) TYPE Working voltage 2012 PART Number FPV2012S3R3M FPV2012S5R6M FPV2012S8R0M FPV2012S9R0L FPV2012S110L FPV2012S120L FPV2012S140L FPV2012S160K FPV2012S180K FPV2012S220K FPV2012S240K FPV2012S260K FPV2012S300K DC Volts 3.3 5.6 8 9 11 12 14 16 18 22 24 26 30 AC Volts 2.5 4 5.7 6.4 7.8 8.5 10 11.3 12.7 15.6 17 18.4 21.2 Varistor voltage @1mA DC VB 5 8 12 13 16 18 20 22 25 30 33 36 42 VB 20% 20% 20% 15% 15% 15% 15% 10% 10% 10% 10% 10% 10% 58 Maximum Clamping Voltage 8/20 s 1A Volts 10 15.5 20 20 25 25 30 35 40 50 54 58 65 Typical Capacitance @1MHz pF 220 140 100 90 70 60 55 50 45 40 35 30 25 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS Multilayer Chip Varistor Array Electrical Characteristics Per Element l l l Reduced component placement costs. Downsize PCB. Use in multiple lines for transient voltage suppression. Working voltage PART Number CVA2010-2G5R6M CVA2010-2G9R0L CVA2010-2G140L CVA2010-2G180L CVA2010-2S180L CVA3216-4G5R6M CVA3216-4G9R0L CVA3216-4G140L CVA3216-4G180L CVA3216-4S180L DC Volts 5.6 9 14 18 18 5.6 9 14 18 18 AC Volts 4 6.4 10 12.7 12.7 4 6.4 10 12.7 12.7 Varistor voltage @1mA DC VB 20% 15% 15% 15% N/A 8 20% 12 15% 18 15% 24 15% N/A VB 8 12 18 24 Characteristics I-V curves VB Vs. Temperature 59 Maximum Clamping Voltage 8/20 s 1A Volts 15.5 20 30 40 40 15.5 20 30 40 40 Energy Absorb 10/1000 s Peak Current 8/20s Joules 0.1 0.1 0.1 0.1 0.05 0.1 0.1 0.1 0.1 0.05 Volts 30 30 30 30 20 30 30 30 30 20 Typical Capacitance @1MHz pF 825 550 425 225 <75 825 550 425 225 <75 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS Energy and Capacitance Vs. Temperature Reliability Test Data 60 GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS Reliability And Test Conditions Type 1 2 3 4 Item Specified value 1005 1608 Operating temperature range Storage temperature range 2012 Test methods 3216 -55 to +125 - -55 to +125 - Solderability At least 90% of terminal electrode is covered by new solder Resistance to soldering No damage such as crucks should be caused in chip element. At least 75% of terminal electrode is covered by new solder Varistor voltage change within 10% Solder temperature: 23010 Duration:31S Preheating temperature: 100 to 150 Preheating time: 60S Flux: immersion into methanol solution with colophony for 3 to 5 sec. Solder temperature: 2605 Duration: 100.5S Preheating temperature: 100 to 150 Preheating time: 60S Flux: immersion into methanol solution with colophony for 3 to 5 sec. The terminal electrode shall not be 5 Terminal broken off nor the chip element. Strength W 0.4 0.5 0.6 W (Kgf) min 1 No mechanical damage. 6 Flextrue strength A 0.45 1.0 1.0 1.3 B 0.5 0.8 1.0 1.5 C 0.5 1.3 1.3 3.0 D 0.8 1.0 1.2 2.0 1 No mechanical damage. 7 Drop Dropped 10 times on a concrete floor from a height of 2 Varistor voltage change within 5% 8 9 10 11 Thermal shock 1m. Temperature: -40 for 303min +85 for 303min Transforming interval :max 20 sec Number of cycles: 32 1 No mechanical damage. 2Varistor voltage change within 5% Loading at low temperature Loading at high temperature 1 No mechanical damage. 2 Varistor voltage change within 5%. 1 No mechanical damage. 2 Varistor voltage change within 5%. Loading under Damp Heat 1 No mechanical damage. 2 Varistor voltage change within 5%. 61 Temperature: -402 Duration: 500 hrs Temperature: 852 Duration: 100012hrs Applied voltage: Working voltage Temperature: 552 Duration: 50012hrs Humidity: 90 to 95%RH Applied voltage: Working voltage GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD Type Item 12 Humidity resistance 13 Vibration Resistance 14 to pressure SMD COMPONENTS Specified value 1005 1608 2012 Test methods 3216 1 No mechanical damage. 2 Varistor voltage change within 5%. 1 No mechanical damage. 2 Varistor voltage change within 5%. Temperature: 552 Duration: 50012hrs Humidity: 90 to 95%RH Amplitude: 1.5mm Directions: 2hrs each in X Y Z direction Frequency range: 10 to 55 to 10HZ (min) The body shall not be damaged by forces applied on the right. of substrate d 15 Solvent resistance 1.3 1.3 1.3 2.0 w 1.0 2.0 3.0 4.0 1No mechanical damage. 2Varistor voltage change within 5%. Solvent : Trichoroethane Washer : ultrasonic washer Wash time : 3min Note: When there are questions concerning, measurement shall be made after 242hrs of recovery under the standard condition. STANDAE QUANTITY TYPE 100505 Quantity(PCS) 10000 TAPING DRAWINGS 160808 4000 201209 4000 321611 3000 322513 3000 451616 5000 453215 3000 TAPING DIMENSIONS (UNIT: mm) Paper tape Part NO. A 100505 0.650.1 160808 1.00.2 201209 1.50.2 Embossed tape 62 B 1.150.1 1.80.2 2.30.2 F 2.00.05 4.00.2 4.00.2 T 0.8max 1.1max 1.1max GUANGDONG ZHAOQING YINGDA INDUCTOR COLTD SMD COMPONENTS W P E F D 4532 12.0+/-0.2 8.0+/-0.10 1.75+/-0.10 5.50+/-0.10 1.55+/-0.05 4516 12.0+/-0.2 4.0+/-0.10 1.75+/-0.10 5.50+/-0.10 1.55+/-0.05 3225 8.1+/-0.2 4.0+/-0.10 1.75+/-0.10 3.50+/-0.10 1.55+/-0.05 3216 8.1+/-0.2 4.0+/-0.10 1.75+/-0.10 3.50+/-0.10 1.55+/-0.05 2012 8.1+/-0.2 4.0+/-0.10 1.75+/-0.10 3.50+/-0.10 1.55+/-0.05 D1 P0 P010 P2 A0 B0 t 0.25 1.50 + -0 4.0+/-0.10 40.0+/-0.20 2.0+/-0.05 3.66+/-0.10 4.95+/-0.10 0.23+/-0.10 0.25 1.50 + -0 4.0+/-0.10 40.0+/-0.20 2.0+/-0.05 1.93+/-0.10 4.95+/-0.10 0.23+/-0.10 0.25 1.50 + -0 4.0+/-0.10 40.0+/-0.20 2.0+/-0.05 2.80+/-0.10 3.50+/-0.10 0.23+/-0.10 0.25 1.50 + -0 4.0+/-0.10 40.0+/-0.20 2.0+/-0.05 1.90+/-0.10 3.51+/-0.10 0.23+/-0.10 0.25 1.50 + -0 4.0+/-0.10 40.0+/-0.20 2.0+/-0.05 1.52+/-0.10 2.41+/-0.10 0.23+/-0.10 REEL DIMENSIONS (UNITmm) CF-8 CF-12 A 178 2.0 B 22.0 2.0 C 12.5 1.5 N 67 2.0 330 2.0 22.0 2.0 12.5 1.5 110 2.0 G 8 12 LEADER AND BLANK PORTION PEELING OFF FORCE : 0.05 to 0.7N in the direction show below. 63