P600A thru P600M Vishay General Semiconductor General Purpose Plastic Rectifier Major Ratings and Characteristics IF(AV) 6.0 A VRRM 50 V to 1000 V IFSM 400 A VF 0.9 V, 1.0 V IR 5.0 A Tj max. 150 C Case Style P600 Features Mechanical Data * * * * * Case: P600, void-free molded epoxy body Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: Color band denotes cathode end Low forward voltage drop Low leakage current High forward current capability High forward surge capability Solder Dip 260 C, 40 seconds Typical Applications For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application. (Note: These devices are not Q101 qualified. Therefore, the devices specified in this datasheet have not been designed for use in automotive or Hi-Rel applications.) Maximum Ratings (TA = 25 C unless otherwise noted) Parameter Symbol Maximum repetitive peak reverse voltage VRRM Maximum RMS voltage P600A P600B P600D P600G P600J P600K P600M 50 100 200 400 600 800 Unit 1000 V VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at TA= 60 C, 0.375" (9.5 mm) lead length (Fig. 1) TL= 60 C, 0.125" (3.18 mm) lead length (Fig. 2) IF(AV) 6.0 22 A Peak forward surge current 8.3 ms single half sinewave superimposed on rated load IFSM 400 A Operating junction and storage temperature range TJ, TSTG - 50 to + 150 C Document Number 88692 30-Aug-05 www.vishay.com 1 P600A thru P600M Vishay General Semiconductor Electrical Characteristics (TA = 25 C unless otherwise noted) Parameter Test condition Maximum instantaneous forward voltage at: Symbol 6.0 A 100 A P600A P600B P600D P600G P600J P600K P600M 0.90 1.30 VF Unit 1.0 1.4 V TA= 25 C TA=100 C IR 5.0 1.0 A mA Typical reverse recovery time at IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 2.5 s Typical junction capacitance at 4.0 V, 1 MHz CJ 150 pF Symbol P600A P600B P600D P600G P600J P600K P600M Unit RJA RJL 20 4.0 C/W Maximum DC reverse current at rated DC blocking voltage Thermal Characteristics (TA = 25 C unless otherwise noted) Parameter Typical thermal resistance (1) Notes: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, P.C.B. mounted with 1.1" x 1.1" (30 x 30 mm) copper pads. Ratings and Characteristics Curves (TA = 25 C unless otherwise noted) 30 60 Hz Resistive or Inductive Load 5.0 4.0 3.0 1.1 x 1.1" x (30 x 30mm) Copper Pads 2.0 Standard P.C.B. Mounting 0.375" (9.5mm) Lead Length 1.0 0 0 20 40 60 80 100 120 140 160 180 200 Ambient Temperature (C) Figure 1. Maximum Forward Current Derating Curve www.vishay.com 2 Average Forward Current (A) Average Forward Rectified Current (A) 6.0 L = 0.125" (3.18mm) 25 L = 0.25" (6.35mm) 20 60 Hz Resistive or Inductive Load Both Leads Attached to Heat Sinks with Length as shown, L 15 L = 0.375" (9.5mm) 10 5.0 L = 0.625" (15.8mm) 0 0 20 40 60 80 100 120 140 160 180 200 Lead Temperature ( C) Figure 2. Maximum Non-repetitive Forward Surge Current Document Number 88692 30-Aug-05 P600A thru P600M Vishay General Semiconductor 100 600 Instantaneous Reverse Current (A) Peak Forward Surge Current (A) 8.3 Single Half Sine-Wave 500 400 TA = 25 C 300 200 TA = 150 C 100 10 TJ = 125 C TJ = 100 C 1 TJ = 25 C 0.1 0.01 0 1 10 0 100 Number of Cycles at 60 Hz Figure 5. Typical Reverse Characteristics 100 Transient Thermal Impedance (CW) 100 Instantaneous Forward Current (A) 100 Percent of Rated Peak Reverse Voltage (%) Figure 3. Typical Instantaneous Forward Characteristics 10 1 0.1 0.01 0.4 80 60 40 20 TJ = 25 C Pulse Width = 300 s 1% Duty Cycle 0.6 0.8 1.0 1.2 1.4 10 1 0.1 0.01 1.6 Instantaneous Forward Voltage (%) 0.1 1 100 10 t, Pulse Duration (sec.) Figure 4. Typical Instantaneous Forward Characteristics Figure 6. Typical Transient Thermal Impedance Package outline dimensions in inches (millimeters) Case Style P600 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 0.048 (1.22) DIA. Document Number 88692 30-Aug-05 1.0 (25.4) MIN. www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1