SILICON DUAL MATCHED NPN TRANSISTORS 2N2920ADCSM * Dual Silicon NPN Matched Transistors * Hermetic Ceramic Surface Mount Package * Designed For Low Noise, Differential Amplifier Applications. * Screening Options Available ABSOLUTE MAXIMUM RATINGS (Each Side, TA = 25C unless otherwise stated) VCBO VCEO VEBO IC PD TJ Tstg Collector - Base Voltage Collector - Emitter Voltage Emitter - Base Voltage Continuous Collector Current TA = 25C Total Power Dissipation at Derate Above 25C Junction Temperature Range Storage Temperature Range Each Side Total Device 60V 60V 6V 30mA (1) 300mW 500mW 1.71mW/C 2.86mW/C -65 to +200C -65 to +200C THERMAL PROPERTIES Symbols Parameters Max. Units RJA Each Side - Thermal Resistance, Junction To Ambient 583.3 C/W 350 C/W RJA (1) Total Device - Thermal Resistance, Junction To Ambient Notes (1) Total device power dissipation limited by package. Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 9986 Issue 1 Page 1 of 3 SILICON DUAL MATCHED NPN TRANSISTORS 2N2920ADCSM ELECTRICAL CHARACTERISTICS (Each Side , TA = 25C unless otherwise stated) Symbols Parameters Test Conditions V(BR)CBO IC = 10A IE = 0 60 IC = 10mA IB = 0 60 V(BR)EBO Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage IE = 10A IC = 0 6 ICEO Collector Cut-Off Current VCE = 5V 2 VCB = 45V 2 (2) V(BR)CEO ICBO Collector Cut-Off Current IEBO Emitter Cut-Off Current Forward-current transfer ratio Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage (2) VCE(sat) VBE(sat) (2) Typ. VEB = 5V VCE = 5V 150 TA = -55C 50 IC = 100A VCE = 5V 225 IC = 1.0mA VCE = 5V 300 IC = 1.0mA IB = 0.1mA IC = 1.0mA IB = 0.1mA Max. Units V TA = 150C IC = 10A hFE Min. nA 10 A 2 nA 600 0.35 V 0.5 1.0 ELECTRICAL MATCHING CHARACTERISTICS (TA = 25C unless otherwise stated) Symbols Test Conditions IC = 100A hFE1 hFE2 Forward-current transfer ratio (gain ratio) |VBE1-VBE2| |(VBE1VBE2)TA| Parameters (3) Base-Emitter Voltage Differential Base-Emitter Voltage Differential Change Due To Temperature Min. Typ Max. VCE = 5V 0.9 1.0 TA = -55C 0.85 1.18 TA = 125C 0.85 1.18 IC = 10A VCE = 5V 2 IC = 100A VCE = 5V 1.5 IC = 1.0mA VCE = 5V 2 IC = 100A VCE = 5V TA1 = -55C TA2 = 25C IC = 100A VCE = 5V TA1 = 25C TA2 = 125C 0.4 Units mV 0.5 Notes (2) Pulse Width 300us, 2% (3) By design only, not a production test Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 9986 Issue 1 Page 2 of 3 SILICON DUAL MATCHED NPN TRANSISTORS 2N2920ADCSM DYNAMIC CHARACTERISTICS (Each Side , TA = 25C unless otherwise stated) Symbols Parameters fT Transition Frequency Cobo Output Capacitance (3) hoe Test Conditions Output Admittance (3) hie Input Impedance (3) hre Reverse Voltage Ratio Spot Noise Figure (3) NF Wide-Band Noise Figure IC = 500A Min. VCE = 5V IE = 0 f = 1.0MHz IC = 1.0mA f = 1.0KHz Max. Units 60 f = 20MHz VCB = 5V Typ. VCE = 5V 2 VCE = 5V f=1.0KHz IC = 10A BW=200Hz RG = 10K f=10Hz to 15.7KHz MHz 6 pF 40 mhos 24 K 800 x10 3 -6 dB 3 Notes (3) By design only, not a production test. MECHANICAL DATA Dimensions in mm (inches) 3 2 1 4 A 6 5 6.22 0.13 (0.245 0.005) 0.23 rad. (0.009) 4.32 0.13 (0.170 0.005) 1.40 0.15 (0.055 0.006) 1.65 0.13 (0.065 0.005) 0.64 0.06 (0.025 0.003) 2.54 0.13 (0.10 0.005) 2.29 0.20 (0.09 0.008) A = 1.27 0.13 (0.05 0.005) LCC2 (MO-041BB) Underside View Pad 1 - Collector 1 Pad 2 - Base 1 Pad 3 - Base 2 Pad 4 - Collector 2 Pad 5 - Emitter 2 Pad 6 - Emitter 1 Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 9986 Issue 1 Page 3 of 3