Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ June 12, 2008 IRS210614S HIGH AND LOW SIDE DRIVER Product Summary IC Features * Floating channel designed for bootstrap operation * Fully operational to +600 V * Tolerant to negative transient voltage, dV/dt immune * Gate drive supply range from 10 V to 20 V * Undervoltage lockout for both channels * 3.3 V, 5 V, and 15 V input logic compatible * Matched propagation delay for both channels * Logic and power ground +/- 5 V offset * Lower di/dt gate driver for better noise immunity * Outputs in phase with inputs * RoHS compliant Topology Half-Bridge VOFFSET 600 V VOUT IO+ & IO- (typical) Ton & toff (typical) 10 V-20 V 290 mA & 600 mA 165 ns & 165 ns Package Types SO14N Typical Connection Diagram up to 600 V HO VCC V CC VB HIN HIN VS LIN LIN VSS V SS TO LOAD COM LO Note: Please refer to page 10 for the correct pin configuration. This diagram shows electrical connections only. Please refer to our Application Notes and Design Tips for proper circuit board layout. www.irf.com (c) 2008 International Rectifier 1 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Table of Contents Page Description 3 Qualification Information 4 Absolute Maximum Ratings 5 Recommended Operating Conditions 6 Static Electrical Characteristics 7 Dynamic Electrical Characteristics 7 Functional Block Diagram 8 Input/Output Pin Equivalent Circuit Diagram 9 Lead Definitions 10 Lead Assignments 10 Waveform Definitions 11 Package Details 12 Tape and Reel Details 13 Part Marking Information 14 Ordering Information 15 www.irf.com (c) 2008 International Rectifier 2 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Description The IRS21064S is a high voltage, high speed power MOSFET and IGBT driver with independent high and low-side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 V. www.irf.com (c) 2008 International Rectifier 3 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Qualification Information Qualification Level Moisture Sensitivity Level Machine Model ESD Human Body Model IC Latch-Up Test RoHS Compliant Industrial Comments: This family of ICs has passed JEDEC's Industrial qualification. IR's Consumer qualification level is granted by extension of the higher Industrial level. MSL2 SOIC14N (per IPC/JEDEC J-STD-020) Class B (per JEDEC standard EIA/JESD22-A115) Class 2 (per EIA/JEDEC standard JESD22-A114) Class 1, Level A (per JESD78) Yes Qualification standards can be found at International Rectifier's web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. www.irf.com (c) 2008 International Rectifier 4 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM, all currents are defined positive into any lead. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. -0.3 625 VB High-side floating supply absolute voltage VS High-side floating supply offset voltage VB - 25 VB + 0.3 High-side floating output voltage VS - 0.3 VB + 0.3 Low-side output voltage -0.3 25 VLO Low-side and logic fixed supply voltage -0.3 VCC + 0.3 VIN Logic input voltage VS -0.3 VCC + 0.3 VSS Logic ground VCC -25 VCC + 0.3 Allowable offset supply voltage transient --- 50 Package power dissipation @ TA +25 C --- 1.0 Thermal resistance, junction to ambient --- 120 TJ Junction temperature --- 150 TS Storage temperature -50 150 TL Lead temperature (soldering, 10 seconds) --- 300 VHO VCC dVS/dt PD RthJA www.irf.com Units V V/ns W C/W C (c) 2008 International Rectifier 5 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Recommended Operating Conditions The input/output logic timing diagram is shown in Fig. 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset rating are tested with all supplies biased at a 15 V differential.. Symbol VB High-side floating supply absolute voltage VS High-side floating supply offset voltage VHO VCC High-side floating output voltage Min. Max. VS + 10 VS + 20 Note 1 600 VS VB Low-side output voltage 10 VLO Low-side and logic fixed supply voltage VIN Logic input voltage VSS TA Definition 0 VCC VSS VCC Logic ground -5 5 Ambient temperature -40 125 Units V C Logic operational for VS of -5 V to +600 V. Logic state held for VS of -5 V to -VBS. (Please refer to the Design Tip DT97-3 for more details). www.irf.com (c) 2008 International Rectifier 6 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Static Electrical Characteristics VBIAS (VCC, VBS) = 14 V, CT = 1 nF and TA = 25 C unless otherwise specified. The VO and IO parameters are referenced to COM and are applicable to the respective output leads: HO or LO. CLO1=CLO2=CHO1=CHO2=1 nF. Symbol Definition Low Voltage Supply Characteristics Min Typ Max -- -- 0.05 0.02 -- 0.8 0.2 0.1 VIH VIL VOH VOL Low level output voltage, VO 2.5 -- -- -- ILK Offset supply leakage current -- -- 50 IQBS IQCC Quiescent VBS supply current 20 75 130 Quiescent VCC supply current 60 120 180 IIN+ Logic "1" input bias current VIN = 5 V -- 5 20 IIN- Logic "0" input bias current VIN = 0 V -- -- 5 VBSUV VCC and VBS supply undervoltage positive going threshold 8.0 8.9 9.8 VCCUVVBSUV- VCC and VBS supply undervoltage negative going threshold 7.4 8.2 9.0 VCCUVH VBSUVH Hysteresis 0.3 0.7 -- Output high short circuit pulsed current 130 290 -- VCCUV+ Io+ Logic "1" input voltage Logic "0" input voltage High level output voltage, VBIAS -VO Units V Output low short circuit pulsed current 270 600 VCC = 10 V to 20V Io = 2 mA VB = VS = 600 V VIN = 0 V or 5V A V VO = 0 V, PW 10 s mA Io- Test Conditions -- VO = 15 V, PW 10 s Dynamic Electrical Characteristics VBIAS (VCC, VBS) = 15 V, VSS = COM, CL = 1000 pF, TA = 25 C. Symbol ton Component Min. Typ. Max. Units Turn-on propagation delay --- 165 230 VS = 0 V toff Turn-off propagation delay --- 165 230 VS = 0 V or 600 V MT Delay matching, HS & LS turn-on/off --- 0 30 tr Turn-on rise time --- 100 220 tf Turn-off fall time --- 35 80 www.irf.com Test Conditions ns VS = 0 V (c) 2008 International Rectifier 7 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Functional Block Diagram VB IRS21064 IRS210614 UV DETECT HO R HIN VSS/COM LEVEL SHIFT HV LEVEL SHIFTER R PULSE FILTER Q S VS PULSE GENERATOR VCC UV DETECT LIN VSS/COM LEVEL SHIFT DELAY LO COM VSS www.irf.com (c) 2008 International Rectifier 8 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY I/O Pin Equivalent Circuit Diagrams www.irf.com (c) 2008 International Rectifier 9 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Lead Definitions Pin# Symbol 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VCC HIN LIN NC VSS COM LO NC NC NC VS HO VB NC Description Low-side and logic fixed supply Logic input for high-side gate driver output (HO), in phase Logic input for low-side gate driver output (LO), in phase No Connect Logic ground Low-side return Low-side drive output No Connect No Connect No Connect High-side floating supply return High-side gate drive output High-side floating supply No Connect Lead Assignments 1 VCC NC 14 2 HIN VB 13 3 LIN HO 12 4 NC VS 11 5 VSS NC 10 6 COM NC 9 7 LO NC 8 www.irf.com (c) 2008 International Rectifier 10 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Waveform definitions www.irf.com (c) 2008 International Rectifier 11 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Package Details: SO14N www.irf.com (c) 2008 International Rectifier 12 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Package Details: SOIC14N, Tape and Reel LOADED TAPE FEED DIRECTION A B H D F C NOTE : CONTROLLING DIM ENSION IN M M E G CARRIER TAPE DIMENSION FOR Metric Code Min Max A 7.90 8.10 B 3.90 4.10 C 15.70 16.30 D 7.40 7.60 E 6.40 6.60 F 9.40 9.60 G 1.50 n/a H 1.50 1.60 14SOICN Imperial Min Max 0.311 0.318 0.153 0.161 0.618 0.641 0.291 0.299 0.252 0.260 0.370 0.378 0.059 n/a 0.059 0.062 F D C B A E G H REEL DIMENSIONS FOR 14SOICN Metric Imperial Code Min Max Min Max A 329.60 330.25 12.976 13.001 B 20.95 21.45 0.824 0.844 C 12.80 13.20 0.503 0.519 D 1.95 2.45 0.767 0.096 E 98.00 102.00 3.858 4.015 F n/a 22.40 n/a 0.881 G 18.50 21.10 0.728 0.830 H 16.40 18.40 0.645 0.724 www.irf.com (c) 2008 International Rectifier 13 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Part Marking Information www.irf.com (c) 2008 International Rectifier 14 Not recommended for new designs. For new designs, we recommend IRS21064SPBF or 2EDL05N06PJ IRS210614S PRELIMINARY Ordering Information Standard Pack Base Part Number IRS210614S Package Type SOIC14N Complete Part Number Form Quantity Tube/Bulk 55 IRS210614SPBF Tape and Reel 2500 IRS210614STRPBF The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR's Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 www.irf.com (c) 2008 International Rectifier 15