Only One Name Means ProTek’Tion™
The SM30KPA Series are high-powered surface mount transient voltage suppression components designed to protect
equipment and systems from the damaging eects of high voltage spikes. The surface mount package conguraon
provides a lower prole at a reduce cost compared to legacy axial lead package conguraons.
These devices provide 30,000 Was of peak pulse power dissipaon for an 10/1000µs waveform. Applicaons in-
clude AC and DC power line protecon, terrestrial base staon protecon as well as module lightning protecon.
• Compable with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(Line-
Ground), L4(Line-Line) & L1 (Power)
• 30,000 Was Peak Pulse Power per Line (tp = 10/1000µs)
• Unidireconal and Bidireconal Conguraons
• Easy Mounng to Printed Circuit Board
• Available in Mulple Voltages Ranging From 30V to 75V
• tClamping (0V to V(BR)Min) < 100ps, Theorecal for Unidireconal and
5ns for Bidireconal
• RoHS Complaint (Exempon #7)
• Black Molded Case
• Approximate Weight: 4 grams
• Lead-Free Silver Plang
• Solder Reow Temperature: 260-270°C
• Flammability Rang UL 94V-0
• Relay Drives
• Motor (Start/Stop) Back EMF Protecon
• Module Lightning Protecon
• Secondary Lightning Protecon for AC/DC
Coming Soon
Only One Name Means ProTek’Tion™
Peak Pulse Power (tp = 10/1000µs) - See Figure 1 PPP 30,000 Was
Forward Surge Rang IF200 Amps
Steady State Power Dissipaon PP1.0 Was
Storage Temperature TSTG TBD °C
Operang Temperature TLTBD °C
SM30KPA30A 30A 30.0 33.3 50 5000 55.2V @ 543.0A 34
SM30KPA36A 36A 36.0 40.0 50 2000 61.8V @ 485.0A 41
SM30KPA43A 43A 43.0 47.8 50 1000 73.0V @ 410.0A 50
SM30KPA48A 48A 48.0 53.3 5 250 77.4V @ 388.0A 56
SM30KPA58A 58A 58.0 64.4 5 20 92.4V @ 325.0A 68
SM30KPA64A 64A 64.0 71.1 5 10 104.0V @ 294.0A 76
SM30KPA75A 75A 75.0 83.3 5 10 119.4V @ 251.0A 89
1. Devices shown are preferred voltages. Consult factory for addional voltages.
2. VF(MAX) = 15 Volts @ 200A, 8.3ms (1/2 Sine Wave) - unidireconal conguraon only.
SM30KPA30CA 30C 30.0 33.3 50 5000 55.2V @ 543.0A 34
SM30KPA33CA 33C 33.0 36.7 50 5000 58.6V @ 512.0A 39
SM30KPA48CA 48C 48.0 53.3 5 250 77.4V @ 388.0A 56
SM30KPA58CA 58C 58.0 64.4 5 20 92.4V @ 325.0A 68
1. Devices shown are preferred voltages. Consult factory for addional voltages.
Only One Name Means ProTek’Tion™
30kW, 10/1000µs
Waveform
Peak Pulse Power
10/1000µs
tf
Peak Value IPP
TEST
WAVEFORM
PARAMETERS
tf = 10µs
td = 1000µs
td = t/(IPP/2)
e-t
Only One Name Means ProTek’Tion™
A 16.9 17.9 0.67 0.70
B 7.4 8.4 0.29 0.33
C 11.8 12.8 0.46 0.50
D 5.4 6.4 0.21 0.25
E 1.7 2.7 0.07 0.11
F 1.7 2.7 0.07 0.11
H 16.9 17.9 0.67 0.70
I 7.4 8.4 0.29 0.33
J 2.6 3.6 0.10 0.14
K 2.8 3.8 0.11 0.15
L 0.00 0.51 0.00 0.020
M 7.3 8.3 0.29 0.33
N 7.1 8.1 0.28 0.32
A
C
BOTTOM VIEW
H
L
SIDE VIEW
N
M
E
F
IJ K
D
B
A
E
C
D
B
F
Package outline, pad layout and tape specicaons per document number 06089.Rc 3/11
A 9.52 9.90 0.375 0.390
B 11.30 11.68 0.445 0.460
C 3.18 3.43 0.125 0.135
D 5.59 5.84 0.220 0.230
E 2.79 3.30 0.110 0.130
F 1.60 1.73 0.063 0.068
Only One Name Means ProTek’Tion™
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specically for
the protecon of electronic systems from the eects of lightning, Electrostac Discharge (ESD), Nuclear Electromagnec Pulse (NEMP), in-
ducve switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
applicaon specic protecon soluons for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
COPYRIGHT © ProTek Devices 2010 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteriscs described herein without noce.
DESIGN CHANGES: ProTek reserves the right to disconnue product lines without noce and that the nal judgement concerning selecon and specicaons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecon or specicaons of such products. ProTek makes no warranty, representaon or guarantee regarding the suitability of
its products for any parcular purpose, nor does ProTek assume any liability arising out of the applicaon or use of any product or circuit and specically disclaims any and all liability without limitaon special,
consequenal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wrien consent from the factory.
2929 South Fair Lane
Tempe, Arizona 85282
USA
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
General: 602-431-2288
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
www.protekdevices.com
www.protekanalog.com
