CR1206NPO562F16VNT91 - Presidio Components, Inc.

High Reliability "CR" Capacitors

(Tested similarly to MIL-PRF-55681 Group A)

7169 Construction Court, San Diego, CA 92121 USA • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225

Web: www.presidiocomponents.com • Email: info@presidiocomponents.com

For applications that require a high level of reliability, Presidio recommends its high reliability “CR”

capacitors. Tested similarly to MIL-PRF-55681 Group A, Presidio manufactures these chips on the

same manufacturing line as its military product line. They may be used in both military and space

applications. Please note these capacitors are NOT MIL-qualified.

Quality Assurance Provisions

Every lot undergoes the following inspection and tests:

• Destructive Physical Analysis (DPA): A 32-piece sample is pulled from each lot and

examined per relevant sections of EIA 469 and to verify adherence to Presidio’s internal

design criteria.

• Voltage Conditioning: All parts receive a voltage conditioning at 2X rated voltage and

125°C for 100 hours. An accelerated voltage conditioning, following MIL-PRF-55681

guidelines, may be used at Presidio’s discretion.

• Capacitance:

All parts are tested at 25°C and 1VACRMS in accordance with method 305 of

MIL-STD-202.

• Dissipation Factor (DF):

Voltage Rating NPO BX X7R

16 / 25 .15% 2.5% 3.5%

≥ 50 .15% 2.5% 2.5%

• Dielectric Withstanding Voltage (DWV): All parts are tested at 2.5X rated voltage in

accordance with Method 301 of MIL-STD-202, or according to EIA/MIL Standards.

• Insulation Resistance (IR @ 25°C): All parts are tested at 25°C and rated voltage in

accordance with Method 302 of MIL-STD-202. The minimum IR required is 100,000

megohms or 1,000 megohm-microfarads.

• Percent Defective Allowed (PDA): The cumulative PDA after voltage conditioning is 8%.

Pieces rejected as out of tolerance for capacitance or visual screening will be removed from

the lot but not counted in the PDA calculation.

• Visual: Performed on pieces in accordance with Presidio internal workmanship criteria.

• Mechanical: Level 1 AQL 1% in accordance with Presidio's catalog.

• Class H Element Evaluation (optional): A MIL-PRF-38534 Appendix C Passive Element

Class H element evaluation is available where the customer requires this testing. Element

evaluation is not required on each lot, and must be specified on the purchase order.

• Operating Temperature Range: -55°C to +125°C

Standard Packaging

Product will be packaged in individual waffle trays.

Data Package

Data will be sent with each shipment including:

• Destructive Physical Analysis Report (optional): Destructive Physical Analysis (DPA)

report and photographs for each lot. Extra charge may apply.

• Certificate of Compliance: A Certificate of Compliance will be sent with each shipment.

• Class H Element Evaluation: If a Class H element evaluation is required, all variables

test data for subgroup 3 tests will be included in the data package.