TX-600
Temperature Compensated Crystal Oscillator
The TX-600 Series TCXO is designed utilizing full analog technology. Extremely low phase noise and smooth frequency vs
temperature are achieved. Innovative packaging design allows for high volume manufacturing as well as low pro le.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Low Phase Noise, Low G-Sensitivity•
Stratum 3 Compliant•
Fully RoHS Compliant •
Surface Mount, Low Pro le•
Rugged Construction•
High Shock Survival > 20 Kg•
Frequency Range: 5 MHZ to 100 MHZ•
Previous Model: C2280•
Military Portable Radios•
GPS Telemetry•
Test and Measurement Equipment•
Wi-Max Basestations•
Wireless Communications•
Wireline Switches•
Features Applications
Description
TX-600
Parameter Min Typ Max Units Condition
Frequency Stabilities1
vs. operating temperature range
(referenced to +25°C)
-2.0
-1.0
-0.5
-0.28
+2.0
+1.0
+0.5
+0.28
ppm
ppm
ppm
ppm
-40… +85°C
-40… +85°C
-20… +70°C
0… +70°C
Total stability -4.6 +4.6 ppm Stratum 3, GR-1244-CORE,
for all causes and 15 yrs aging
Initial Tolerance
vs. supply voltage change
vs. load change
vs. aging / 1 year
vs. aging
-1.0
-0.1
-0.2
±1
+1.0
+0.1
+0.2
4.0
ppm
ppm
ppm
ppm
ppm
at time of shipment, nominal EFC
Vs ± 5%
Load ± 10%
@ +40°C
for 15 years
Supply Voltage (Vs)
Supply voltage 4.75 5.0 5.25 VDC
Supply voltage 3.135 3.3 3.465 VDC
Supply voltage 2.7 2.8 2.9 VDC
Current consumption 35 mA Depends on frequency
Performance Speci cations
Performance Speci cations
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Parameter Min Typ Max Units Condition
RF Output
Signal HCMOS
Load 15 pF
Signal Level (Vol) 0.1*Vs V
Signal Level (Voh) 0.9*Vs V
Rise/Fall Time 5 ns @ nominal Load and 10% to 90% of waveform
Duty cycle 40 50 60 % @ nominal Load and @ 50% level
Tri-State (>12.8 MHz) Active High Tristate Output standard
Signal Clipped Sinewave
Level 1 Vpp with Nominal Load
Load R 10 kohm
Load C 10 pF
Frequency Tuning (EFC)
Tuning Range Fixed; No adjust
Tuning Range ±5.0 ppm
Tuning Slope Positive
Control Voltage Range 0.0 Vs VDC
Freq. control input impedance 10 kohm
Additional Parameters1
Reference Voltage (Vref)
(1 mA source)
+3.8
+2.3
+4.0
+2.4
+4.1
+2.5
VDC
VDC
Vs=>+4.5 VDC
Vs=>+2.7 VDC
Phase Noise3 (@ 20 MHz tested under nomi-
nal operating conditions)
-90
-120
-140
-145
-150
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
Jitter 1 ps RMS
Absolute Maximum Ratings
Supply voltage (Vs) 6.0 V Damage will occur beyond this level
Control Voltage 0 Vs V
Operable temperature range -45 +90 °C
Storage temperature range -55 +105 °C
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Dimensions in inches (mm)
Type C
Code Height “H” Pin Length “L”
0 3.6 mm NA
Pin Connections
1 Voltage Control (Vc)
2 Reference Voltage (Vref)
3 Ground (Case)
4 Output
5 Enable
6 Supply Voltage (Vs)
Outline Drawing / Enclosure
Ordering Information
TX - 600 0 - D A T - 106 A - 10M0000000
Product Family
TX: TCXO
Package
7 x 9 mm
Height
0: C3.6 mm
Supply Voltage
D: 5 Vdc
E: 3.3 Vdc
G: 2.8Vdc
Stability Code
206: ±2.0ppm
106: ±1.0ppm
507: ±0.5ppm
287: ±0.28ppm
466: ±4.6ppm (Stratum3)
Frequency
Tuning Option
A: No Tuning
B: Electrical Tuning
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 2/24/2009 daf
For Additional Information, Please Contact
USA:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Fax: +49 (0) 3328.4784.30
Asia:
Vectron International
1F-2F, No 8 Workshop, No 308 Fenju Road
WaiGaoQiao Free Trade Zone
Pudong, Shanghai, China 200131
Tel: 86.21.5048.0777
Fax: 86.21.5048.1881
RF Output Code
A: HCMOS
F: Sinewave, clipped
Temperature Range
E: -40°C to +85°C
J: -20°C to +70°C
T: 0°C to +70°C
Notes:
Contact factory for improved stabilities or additional product options. Not all options and codes are available at all 1.
frequencies.
Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency 2.
control voltage, load, temperature (25°C).
Phase noise degrades with increasing output frequency.3.
Subject to technical modi cation.4.
Contact factory for availability.5.
