TX-600 Temperature Compensated Crystal Oscillator TX-600 Description The TX-600 Series TCXO is designed utilizing full analog technology. Extremely low phase noise and smooth frequency vs temperature are achieved. Innovative packaging design allows for high volume manufacturing as well as low profile. Features * * * * * * * * Applications Low Phase Noise, Low G-Sensitivity Stratum 3 Compliant Fully RoHS Compliant Surface Mount, Low Profile Rugged Construction High Shock Survival > 20 Kg Frequency Range: 5 MHZ to 100 MHZ Previous Model: C2280 * * * * * * Military Portable Radios GPS Telemetry Test and Measurement Equipment Wi-Max Basestations Wireless Communications Wireline Switches Performance Specifications Parameter Min Typ Max Units Condition 1 Frequency Stabilities vs. operating temperature range (referenced to +25C) -2.0 -1.0 -0.5 -0.28 +2.0 +1.0 +0.5 +0.28 ppm ppm ppm ppm -40... +85C -40... +85C -20... +70C 0... +70C Total stability -4.6 +4.6 ppm Stratum 3, GR-1244-CORE, for all causes and 15 yrs aging Initial Tolerance vs. supply voltage change vs. load change vs. aging / 1 year vs. aging -1.0 -0.1 -0.2 +1.0 +0.1 +0.2 ppm ppm ppm ppm ppm at time of shipment, nominal EFC Vs 5% Load 10% @ +40C for 15 years 1 4.0 Supply Voltage (Vs) Supply voltage 4.75 5.0 5.25 VDC Supply voltage 3.135 3.3 3.465 VDC Supply voltage 2.7 2.8 2.9 VDC 35 mA Current consumption Depends on frequency Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Specifications Parameter Min Typ Max Units Condition RF Output HCMOS Signal 15 Load pF 0.1*Vs Signal Level (Vol) 0.9*Vs Signal Level (Voh) V Rise/Fall Time 40 Duty cycle V 50 5 ns @ nominal Load and 10% to 90% of waveform 60 % @ nominal Load and @ 50% level Active High Tri-State (>12.8 MHz) Signal Tristate Output standard Clipped Sinewave Level 1 Vpp Load R 10 kohm Load C 10 pF with Nominal Load Frequency Tuning (EFC) Tuning Range Fixed; No adjust 5.0 Tuning Range ppm Positive Tuning Slope Control Voltage Range 0.0 Freq. control input impedance 10 Vs VDC kohm Additional Parameters1 Reference Voltage (Vref ) (1 mA source) +3.8 +2.3 Phase Noise3 (@ 20 MHz tested under nominal operating conditions) Jitter +4.0 +2.4 +4.1 +2.5 VDC VDC Vs=>+4.5 VDC Vs=>+2.7 VDC -90 -120 -140 -145 -150 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 1 ps RMS Absolute Maximum Ratings Supply voltage (Vs) Control Voltage 0 6.0 V Vs V Operable temperature range -45 +90 C Storage temperature range -55 +105 C Damage will occur beyond this level Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Outline Drawing / Enclosure Dimensions in inches (mm) Pin Connections Type C Code Height "H" Pin Length "L" 0 3.6 mm NA 1 Voltage Control (Vc) 2 Reference Voltage (Vref ) 3 Ground (Case) 4 Output 5 Enable 6 Supply Voltage (Vs) Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Ordering Information TX - 600 0 - D A T - 106 A - 10M0000000 Frequency Product Family TX: TCXO Tuning Option A: No Tuning B: Electrical Tuning Package 7 x 9 mm Height 0: C3.6 mm Stability Code 206: 2.0ppm 106: 1.0ppm 507: 0.5ppm 287: 0.28ppm 466: 4.6ppm (Stratum3) Supply Voltage D: 5 Vdc E: 3.3 Vdc G: 2.8Vdc RF Output Code A: HCMOS F: Sinewave, clipped Temperature Range E: -40C to +85C J: -20C to +70C T: 0C to +70C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2/24/2009 daf Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com