!Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 Chip Ferrite Bead NF p 102 Part Numbering 104 Series Line Up 107 Product Detail 110 !Caution/Notice 138 Soldering and Mounting 139 Packaging 145 Design Kits 146 Block Type EMIFILr Chip Common Mode Choke Coil Series Introduction Chip EMIFILr Chip EMIFILr !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 NFp Series Introduction Chip Ferrite Bead Example of 3 Terminal Capacitor Structure Ground Terminal Output (Input) Terminal Chip 3 terminal capacitor is chip shaped 3 terminal capacitor designed for noise suppression. Its inner structure like feed through capacitor makes its ground impedance quite low. Owing to this structure, 3 terminal capacitor has good noise suppression effect at high frequency range up to several hundred MHz. Ground Terminal Input (Output) Terminal Ground Terminal Chip EMIFILr Inner Feed Through Electrode Cross Section Series Equivalent Circuit NFM Series (3 terminal capacitor) Part Number NFM18CC NFM21CC NFM18PC NFM18PS Chip Common Mode Choke Coil NFM21PC NFL18ST NFL / NFW Series (LC filter) NFL18SP NFL21SP NFW31SP NFA21S Block Type EMIFILr NFA18S NFR Series (RC filter) NFE Series Feed through capacitor with ferrite cores NFR21GD NFA31GD NFE31PT NFE61PT !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 102 Chip Ferrite Bead NFp Series Introduction 0 10 Insertion Loss (dB) 20 Multilayer Capacitor 30 1608 Size 1F 40 50 60 70 3 Terminal Capacitor 1608 Size 1F NFM18PS105 80 90 0.1 1 10 100 1000 Insertion Loss Sample Features Chip EMIFILr Frequency (MHz) Classification Applications Example NFM_CC Standard type with varied capacitance Noise suppression in low speed signal lines * Low speed interface lines, * sensor NFM_PC Meet large current, high capacitance available, for power lines Noise suppression in power lines * Individual IC power lines NFL_ST T-type filter, effective in low impedance circuits NFL_SP -type filter, effective in high impedance circuits NFW_SP -type filter, designed for low impedance circuits NFA_SL 4-line array, suitable for bus lines or flat cables Noise suppression in high speed signal lines * High speed interface lines * Bus lines LCD lines Camera I/Fs * High speed analog lines RGB / D terminal Limit noise using resistor, also loop back to ground Noise suppression in signal line with unstable ground * Interface lines * Clock lines Meet large current, good high frequency performance because of its feed through structure Noise suppression in power lines / low impedance lines * Various power lines * sensor Block Type EMIFILr Sharp insertion loss curve enables low damage to signal waveform Chip Common Mode Choke Coil Standard of 3 terminal capacitor !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 103 NFp Part Numbering Chip EMIFILr Chip Ferrite Bead Capacitor (Part Number) NF M 3D CC 102 R 1H 3 L q w e r t y u i o qProduct ID yCharacteristics Product ID NF Chip EMIFILr wStructure Code Capacitance Change (Temperature Characteristics) B 10%, 12.5%, +10/-13% F +30/-80%, +30/-84% R 15%, +15/-18% Code Structure U -750 120ppm/C M Capacitor Type S +350 to -1000ppm/C A Capacitor Array Type Chip EMIFILr uRated Voltage eDimensions (LgW) Code Rated Voltage Dimensions (LgW) EIA 0J 6.3V 18 1.6g0.8mm 0603 1A 10V 21 2.0g1.25mm 0805 1C 16V 3D 3.2g1.25mm 1205 1E 25V 31 3.2g1.6mm 1206 1H 50V 41 4.5g1.6mm 1806 2A 100V 55 5.7g5.0mm 2220 Code iElectrode/Others (NFM Series) Chip Common Mode Choke Coil rFeatures Code Electrode Series Code Features 3 Sn Plating NFM (Except NFM55) CC Capacitor Type for Signal Lines 4 Solder Coating NFM55 PC Capacitor Type for Large Current PS High Loss Type for Large Current tCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. iNumber of Circuits (NFAppCC Series) Code Number of Circuits 4 4 Circuits oPackaging Code Packaging L Embossed Taping (o180mm Reel) Bulk D Paper Taping (o180mm Reel) All series NFM18/NFM21/NFAppCC Block Type EMIFILr B Series NFM3D/NFM31/NFM41/NFM55 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 104 NFp Chip EMIFILr Part Numbering NF L 18 ST q w e r X 1C 107 3 L y u i o t qProduct ID yCharacteristics (NFL/NFW Series) Product ID Chip EMIFILr wStructure Code Characteristics X Cut-off Frequency yCharacteristics (NFE Series) Code Structure Code L Maltilayer, LC Combined Type B 10% W Wire Wound, LC Combined Type C 20%, 22% E Block, LC Combined Type D +20/-30%, +22/-33% E +20/-55%, +22/-56% F +30/-80%, +22/-82% eDimensions (LgW) Capacitance Change (Temperature Characteristics) Code Dimensions (LgW) EIA R 15% 18 1.6g0.8mm 0603 U -750 120ppm/ C 21 2.0g1.25mm 0805 Z Other 31 3.2g1.6mm 1206 61 6.8g1.6mm 2606 rFeatures uRated Voltage Code Rated Voltage 1A 10V Code Features 1C 16V SP Circuit for Signal Lines 1E 25V ST T Circuit for Signal Lines 1H 50V PT T Circuit for Large Current 2A 100V tCut-off Frequency (NFL/NFW Series) Expressed by three figures. The unit is in hertz (Hz). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Chip EMIFILr NF Chip Common Mode Choke Coil (Part Number) Chip Ferrite Bead LC Combined (1) iElectrode Code Electrode Series 3/7 Sn Plating NFL 4 Lead Free Solder Coating NFW 9 Others NFE tCapacitance (NFE Series) Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. oPackaging Packaging K Embossed Taping (o330mm Reel) NFW31/NFE NFW31/NFE L Embossed Taping (o180mm Reel) B Bulk D Paper Taping (o180mm Reel) Series Block Type EMIFILr Code NFL18/NFL21/NFE NFL18/NFL21 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 105 NFp Chip EMIFILr Part Numbering LC Combined (2) Chip Ferrite Bead (Part Number) NF A 21 SL 207 X 1A 4 5 q w e r t y u i o !0 qProduct ID L yFeatures (2) Product ID Code NF Chip EMIFILr X V wStructure Code Structure A Array Type Expressed by a letter uRated Voltage eDimensions (LgW) Chip EMIFILr Features Code Rated Voltage 1A 10V iNumber of Circuits Code Dimensions (LgW) EIA 18 1.6g0.8mm 0603 Code Number of Circuits 21 2.0g1.25mm 0805 4 4 Circuits rFeatures (1) oDimensions (T) Code Features Code Dimensions (T) SL L Circuit for Signal Lines 5 Low Profile SD L Circuit for Differential Signal 8 Standard tCut-off Frequency Expressed by three figures. The unit is in hertz (Hz). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. !0Packaging Code Packaging B Bulk L Embossed Taping (o180mm Reel) Chip Common Mode Choke Coil RC Combined (Part Number) NF R 21 GD 470 q w e r 2 470 t y L u i qProduct ID tCapacitance Expressed by three figures. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Product ID NF Chip EMIFILr wStructure Code Structure R RC Combined Type A RC Combined Array Type yResistance Expressed by three-digit alphanumerics. The unit is in ohm (). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. Block Type EMIFILr eDimensions (LgW) uElectrode/Others (NFR Series) Code Dimensions (LgW) EIA 21 2.0g1.25mm 0805 Code Electrode 31 3.2g1.6mm 1206 2 Sn Plating rFeatures uNumber of Circuits (NFAppGD Series) Code Features Code Number of Circuits GD RC Combined Type for Signal Lines 4 4 Circuits iPackaging Code Packaging L Embossed Taping (o180mm Reel) B Bulk D Paper Taping (o180mm Reel) Series NFR All Series NFAppGD !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 106 0603 p121 0805 Capacitor Type for Signal Lines p122 1205 p123 1806 p124 Capacitor Array Type for Signal Lines 1206 p112 p113 0603 p115 Capacitor Type for Power Lines 0805 1205 1206 p116 p117 p118 1806 2220 p119 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.7 1.3 1.0 1.0 2.2 Rated Voltage Capacitance Nominal Cut-off Frequency Rated Current NFM18CC220U1C3 NFM18CC470U1C3 NFM18CC101R1C3 NFM18CC221R1C3 NFM18CC471R1C3 NFM18CC102R1C3 NFM18CC222R1C3 NFM18CC223R1C3 NFM21CC220U1H3 NFM21CC470U1H3 NFM21CC101U1H3 NFM21CC221R1H3 NFM21CC471R1H3 NFM21CC102R1H3 NFM21CC222R1H3 NFM21CC223R1H3 NFM3DCC220U1H3 NFM3DCC470U1H3 NFM3DCC101U1H3 NFM3DCC221R1H3 NFM3DCC471R1H3 NFM3DCC102R1H3 NFM3DCC222R1H3 NFM3DCC223R1H3 NFM41CC220U2A3 NFM41CC470U2A3 NFM41CC101U2A3 NFM41CC221U2A3 NFM41CC471R2A3 NFM41CC102R2A3 NFM41CC222R2A3 NFM41CC223R2A3 NFA31CC220S1E4 NFA31CC470S1E4 NFA31CC101S1E4 NFA31CC221S1E4 NFA31CC471R1E4 NFA31CC102R1E4 NFA31CC222R1E4 NFA31CC223R1C4 NFM18PS474R0J3 NFM18PS105R0J3 NFM18PC104R1C3 NFM18PC224R0J3 NFM18PC474R0J3 NFM18PC105R0J3 NFM18PC225B0J3 NFM18PC225B1A3 NFM21PC104R1E3 NFM21PC224R1C3 NFM21PC474R1C3 NFM21PC105B1A3 NFM21PC105B1C3 NFM21PC225B0J3 NFM21PC475B1A3 NFM3DPC223R1H3 NFM31PC276B0J3 NFM41PC204F1H3 NFM41PC155B1E3 NFM55PC155F1H4 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 100Vdc 100Vdc 100Vdc 100Vdc 100Vdc 100Vdc 100Vdc 100Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 16Vdc 6.3Vdc 6.3Vdc 16Vdc 6.3Vdc 6.3Vdc 6.3Vdc 6.3Vdc 10Vdc 25Vdc 16Vdc 16Vdc 10Vdc 16Vdc 6.3Vdc 10Vdc 50Vdc 6.3Vdc 50Vdc 25Vdc 50Vdc 22pF+20%-20% 47pF+20%-20% 100pF+20%-20% 220pF+20%-20% 470pF+20%-20% 1000pF+20%-20% 2200pF+20%-20% 22000pF+20%-20% 22pF+20%-20% 47pF+20%-20% 100pF+20%-20% 220pF+20%-20% 470pF+20%-20% 1000pF+20%-20% 2200pF+20%-20% 22000pF+20%-20% 22pF+50%-20% 47pF+50%-20% 100pF+50%-20% 220pF+50%-20% 470pF+50%-20% 1000pF+50%-20% 2200pF+50%-20% 22000pF+50%-20% 22pF+50%-20% 47pF+50%-20% 100pF+50%-20% 220pF+50%-20% 470pF+50%-20% 1000pF+50%-20% 2200pF+50%-20% 22000pF+50%-20% 22pF+20%-20% 47pF+20%-20% 100pF+20%-20% 220pF+20%-20% 470pF+20%-20% 1000pF+20%-20% 2200pF+20%-20% 22000pF+20%-20% 0.47F+20%-20% 1.0F+20%-20% 0.1F+20%-20% 0.22F+20%-20% 0.47F+20%-20% 1.0F+20%-20% 2.2F+20%-20% 2.2F+20%-20% 0.1F+20%-20% 0.22F+20%-20% 0.47F+20%-20% 1.0F+20%-20% 1.0F+20%-20% 2.2F+20%-20% 4.7F+20%-20% 0.022F+20%-20% 27F+20%-20% 0.2F+80%-20% 1.5F+20%-20% 1.5F+80%-20% - 400mA 400mA 500mA 500mA 500mA 600mA 700mA 1000mA 700mA 700mA 700mA 700mA 1000mA 1000mA 1000mA 2000mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 300mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 2A 2A 2A 2A 2A 4A 2A 4A 2A 2A 2A 4A 4A 4A 6A 2A 6A 2A 6A 6A Chip Ferrite Bead p120 Part Number Chip EMIFILr Size Code Thickness (Inch) (mm) Series Line Up Chip Common Mode Choke Coil Type Chip EMIFILr Block Type EMIFILr NFp Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 107 NFp Chip EMIFILr Series Line Up Type Size Code Thickness (Inch) (mm) Chip Ferrite Bead p110 1206 LC Combined Type for Power Lines and Signal Lines p111 2706 Chip EMIFILr p125 p126 0603 p127 LC Combined Multilayer Type for Signal Lines p128 Chip Common Mode Choke Coil 0805 p129 0603 p130 p131 Block Type EMIFILr LC Combined Array Type for Signal Lines p132 0805 p133 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 0.6 0.6 0.6 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.6 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.5 0.5 0.5 0.85 0.85 0.85 0.5 0.5 0.85 0.85 0.85 0.85 Part Number Rated Voltage Capacitance Nominal Cut-off Frequency Rated Current NFE31PT220R1E9 NFE31PT470C1E9 NFE31PT101C1E9 NFE31PT221D1E9 NFE31PT471F1E9 NFE31PT152Z1E9 NFE31PT222Z1E9 NFE61PT330B1H9 NFE61PT680B1H9 NFE61PT101Z1H9 NFE61PT181B1H9 NFE61PT361B1H9 NFE61PT681B1H9 NFE61PT102E1H9 NFE61PT472C1H9 NFL18ST506H1A3 NFL18ST706H1A3 NFL18ST107H1A3 NFL18ST207X1C3 NFL18ST307X1C3 NFL18ST507X1C3 NFL18SP157X1A3 NFL18SP207X1A3 NFL18SP307X1A3 NFL18SP507X1A3 NFL21SP106X1C3 NFL21SP206X1C7 NFL21SP506X1C3 NFL21SP706X1C3 NFL21SP107X1C3 NFL21SP157X1C3 NFL21SP207X1C3 NFL21SP307X1C3 NFL21SP407X1C3 NFL21SP507X1C3 NFA18SL137V1A45 NFA18SL187V1A45 NFA18SL207V1A45 NFA18SL227V1A45 NFA18SL307V1A45 NFA18SL357V1A45 NFA18SL407V1A45 NFA18SL487V1A45 NFA18SL506X1A45 NFA18SD187X1A45 NFA18SD207X1A45 NFA21SL287V1A45 NFA21SL317V1A45 NFA21SL337V1A45 NFA21SL287V1A48 NFA21SL317V1A48 NFA21SL337V1A48 NFA21SL207X1A45 NFA21SL307X1A45 NFA21SL506X1A48 NFA21SL806X1A48 NFA21SL207X1A48 NFA21SL307X1A48 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 25Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 10Vdc 10Vdc 10Vdc 16Vdc 16Vdc 16Vdc 10Vdc 10Vdc 10Vdc 10Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 16Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 22pF+30%-30% 47pF+50%-20% 100pF+80%-20% 220pF+50%-20% 470pF+50%-20% 1500pF+50%-20% 2200pF+50%-50% 33pF+30%-30% 68pF+30%-30% 100pF+30%-30% 180pF+30%-30% 360pF+20%-20% 680pF+30%-30% 1000pF+80%-20% 4700pF+80%-20% 110pF (Typ.) 70pF (Typ.) 50pF (Typ.) 25pF+20%-20% 18pF+20%-20% 10pF+20%-20% 34pF+20%-20% 24pF+20%-20% 19pF+20%-20% 11pF+20%-20% 670pF+20%-20% 240pF+20%-20% 84pF+20%-20% 76pF+20%-20% 44pF+20%-20% 28pF+20%-20% 22pF+20%-20% 19pF+10%-10% 16pF+10%-10% 12pF+10%-10% - 50MHz 70MHz 100MHz 200MHz 300MHz 500MHz 150MHz 200MHz 300MHz 500MHz 10MHz 20MHz 50MHz 70MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz 130MHz 180MHz 200MHz 220MHz 300MHz 350MHz 400MHz 480MHz 50MHz 180MHz 200MHz 280MHz 310MHz 330MHz 280MHz 310MHz 330MHz 200MHz 300MHz 50MHz 80MHz 200MHz 300MHz 6A 6A 6A 6A 6A 6A 6A 2A 2A 2A 2A 2A 2A 2A 2A 75mA 75mA 75mA 150mA 200mA 200mA 100mA 100mA 100mA 100mA 100mA 100mA 150mA 150mA 200mA 200mA 250mA 300mA 300mA 300mA 50mA 50mA 50mA 25mA 100mA 35mA 100mA 100mA 25mA 25mA 25mA 100mA 100mA 100mA 100mA 100mA 100mA 100mA 100mA 20mA 20mA 100mA 100mA Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 108 Size Code Thickness (Inch) (mm) p134 LC Combined Wire Wound Type for Signal Lines 1206 p136 RC Combined Type for Signal Lines 0805 p137 1206 Rated Voltage Capacitance Nominal Cut-off Frequency Rated Current NFW31SP106X1E4 NFW31SP206X1E4 NFW31SP506X1E4 NFW31SP107X1E4 NFW31SP157X1E4 NFW31SP207X1E4 NFW31SP307X1E4 NFW31SP407X1E4 NFW31SP507X1E4 NFR21GD1002202 NFR21GD1004702 NFR21GD4702202 NFR21GD4704702 NFR21GD4706802 NFR21GD4701012 NFR21GD1012202 NFR21GD1014702 NFR21GD1016802 NFR21GD1011012 NFA31GD1006R84 NFA31GD1004704 NFA31GD1001014 NFA31GD4706R84 NFA31GD4703304 NFA31GD4704704 NFA31GD4701014 NFA31GD1016R84 NFA31GD1014704 NFA31GD1011014 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 50Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 6Vdc 10pF+20%-20% 10pF+20%-20% 47pF+20%-20% 47pF+20%-20% 47pF+20%-20% 47pF+20%-20% 100pF+20%-20% 100pF+20%-20% 100pF+20%-20% 100pF+20%-20% 10pF+20%-20% 10pF+20%-20% 10pF+20%-20% 47pF+20%-20% 47pF+20%-20% 47pF+20%-20% 47pF+20%-20% 100pF+20%-20% 100pF+20%-20% 100pF+20%-20% 10MHz 20MHz 50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz - 50mA 35mA 50mA 35mA 30mA 25mA 50mA 35mA 30mA 25mA 50mA 20mA 15mA 50mA 20mA 20mA 15mA 50mA 20mA 15mA Block Type EMIFILr Chip Common Mode Choke Coil RC Combined Array Type for Signal Lines 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Part Number Chip EMIFILr Type Chip Ferrite Bead NFp Chip EMIFILr Series Line Up !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 109 NFE Series Universal Type [Power Lines/Signal Lines] Chip EMIFILr NFE31P NFE31P Series (1206 Size) Chip Ferrite Bead Meet 6A, T-type filter with built-in ferrite bead. Dimensions Equivalent Circuit 1.00.2 0.70.2 (1) (2) (3) Input (1) 1.60.15 0.70.2 Output (3) GND (2) No polarity. 3.20.35 Packaging 1.60.15 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 2000 K 330mm Reel Embossed Tape 8000 B Bulk(Bag) 500 : Electrode Chip EMIFILr Universal Type [Power Lines/Signal Lines] (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFE31PT220R1E9p 22pF+30%-30% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT470C1E9p 47pF+50%-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT101C1E9p 100pF+80%-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT221D1E9p 220pF+50%-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT471F1E9p 470pF+50%-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT152Z1E9p 1500pF+50%-20% 6A 25Vdc 1000M ohm -40C to +85C NFE31PT222Z1E9p 2200pF+50%-50% 6A 25Vdc 1000M ohm -40C to +85C Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFE31PT220R1E9 NFE31PT470C1E9 10 NFE31PT101C1E9 Insertion Loss (dB) Chip Common Mode Choke Coil Number of Circuit: 1 20 NFE31PT221D1E9 NFE31PT471F1E9 NFE31PT152Z1E9 30 NFE31PT222Z1E9 40 50 60 10 100 Frequency (MHz) 1000 2000 Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 110 NFE Series Universal Type [Power Lines/Signal Lines] Chip EMIFILr NFE61P NFE61P Series (2706 Size) Dimensions Chip Ferrite Bead T-type filter with built-in ferrite bead. Equivalent Circuit 2.60.3 0.70.2 (1) (2) (3) Input (1) Output (3) 1.60.3 0.70.2 6.80.5 GND (2) No polarity. 1.60.3 Code Packaging Minimum Quantity : Electrode L 180mm Reel Embossed Tape 2500 K 330mm Reel Embossed Tape 8000 B Bulk(Bag) 500 (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFE61PT330B1H9p 33pF+30%-30% 2A 50Vdc 1000M ohm -25C to +85C NFE61PT680B1H9p 68pF+30%-30% 2A 50Vdc 1000M ohm -25C to +85C NFE61PT101Z1H9p 100pF+30%-30% 2A 50Vdc 1000M ohm -25C to +85C NFE61PT181B1H9p 180pF+30%-30% 2A 50Vdc 1000M ohm -25C to +85C NFE61PT361B1H9p 360pF+20%-20% 2A 50Vdc 1000M ohm -25C to +85C NFE61PT681B1H9p 680pF+30%-30% 2A 50Vdc 1000M ohm -25C to +85C NFE61PT102E1H9p 1000pF+80%-20% 2A 50Vdc 1000M ohm -25C to +85C NFE61PT472C1H9p 4700pF+80%-20% 2A 50Vdc 1000M ohm -25C to +85C Chip Common Mode Choke Coil Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFE61PT330B1H9 NFE61PT680B1H9 Insertion Loss (dB) 10 NFE61PT101Z1H9 20 NFE61PT181B1H9 NFE61PT361B1H9 30 NFE61PT681B1H9 NFE61PT102E1H9 40 Universal Type [Power Lines/Signal Lines] Chip EMIFILr Packaging NFE61PT472C1H9 50 1 10 Frequency (MHz) 100 1000 2000 Block Type EMIFILr 60 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 111 NFM Series Power Lines Type Chip EMIFILr NFM18PS NFM18PS Series (0603 Size) 3-terminal capacitor for power lines whose ground impedance has reduced. Chip Ferrite Bead *Please refer to the products which are designed for both power lines and signal lines. 0.80.1 (2) Equivalent Circuit 0.15+0.2 -0.1 Dimensions (1) Input Output (3) 0.15+0.2 -0.1 (1) 0.2 min. No polarity. GND (3) (2) (2) 1.60.1 0.60.1 Packaging 0.8+0.2 -0.1 0.40.1 Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode Chip EMIFILr Power Lines Type (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM18PS474R0J3p 0.47F+20%-20% 2A 6.3Vdc 1000M ohm -55C to +125C NFM18PS105R0J3p 1.0F+20%-20% 2A 6.3Vdc 500M ohm -55C to +105C Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 Insertion Loss (dB) NFM18PS474R0J3 NFM18PS105R0J3 40 60 80 100 0.1 1 10 Frequency (MHz) 100 1000 3000 Block Type EMIFILr Chip Common Mode Choke Coil 20 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 112 NFM Series Power Lines Type Chip EMIFILr NFM18PC NFM18PC Series (0603 Size) 4A max, 0603 size chip 3-terminal capacitor for power lines. NFM18PC (0.1 to 0.47F, 2.2F-6.3V) Dimensions 0.250.1 Chip Ferrite Bead *Please refer to the products which are designed for both power lines and signal lines. Equivalent Circuit 0.40.1 0.80.1 Output (3) 0.60.1 (1) Input No polarity. GND (2) 0.2 min. 1.60.1 (2) (3) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (2) 0.20.1 (in mm) Dimensions NFM18PC (1F, 2.2F-10V) 0.2 min. Power Lines Type Chip EMIFILr (1) 0.80.1 Packaging Equivalent Circuit 0.2 min. (1) Input (1) Output (3) 0.80.1 (2) (3) No polarity. GND (2) 0.250.1 0.250.1 (2) 0.80.1 0.40.1 1.60.1 Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM18PC104R1C3p 0.1F20% 2A 16Vdc 1000M ohm -55C to +125C NFM18PC224R0J3p 0.22F20% 2A 6.3Vdc 1000M ohm -55C to +125C NFM18PC474R0J3p 0.47F20% 2A 6.3Vdc 1000M ohm -55C to +125C NFM18PC105R0J3p 1.0F20% 4A 6.3Vdc 500M ohm -55C to +105C NFM18PC225B0J3p 2.2F20% 2A 6.3Vdc 200M ohm -40C to +85C NFM18PC225B1A3p 2.2F20% 4A 10Vdc 200M ohm -40C to +85C Chip Common Mode Choke Coil Packaging Number of Circuit: 1 Block Type EMIFILr Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFM18PC104R1C3 20 Insertion Loss (dB) NFM18PC224R0J3 NFM18PC474R0J3 40 60 NFM18PC105R0J3 NFM18PC225B0J3 (6.3V) NFM18PC225B1A3 (10V) 80 100 0.1 1 10 Frequency (MHz) 100 1000 3000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 113 Chip Ferrite Bead EMI Suppression Effect NFM18P Series * High frequency performance of NFM18PS series Chip 3 terminal capacitor (50 ohm - 50 ohm) 0 2 terminal MLCC: 2012 size (0.1Fx10pcs parallel) 10 20 30 I.L. (dB) 40 NFM18PC105R0J3 1pc : 1608 size (1.0F) 50 60 70 80 NFM18PS105R0J3 1pc : 1608 size (1.0F) Chip EMIFILr Power Lines Type 90 100 0.1 1 10 100 Frequency (MHz) 1000 10000 NFM18PS series has better high frequency performance compared to normal chip 3 terminal capacitors. * Optimize of bypass capacitors using chip 3 terminal capacitor Bypass capacitor chip 3 terminal capacitor IC ry Memo Amount of parts can be reduced. * Reduce PCB space * Reduce mount cost Chip Common Mode Choke Coil IC ry Memo Comparison of performance as bypass capacitor Without capacitor Micro computer Block Type EMIFILr With chip 3 terminal capacitor (NFM) 1Fx1 With MLCC 0.22Fx4 Micro computer Inner layer power pattern Micro computer GND Power line MLCC NFM 40 30 20 0 200 400 600 Frequency (MHz) 800 1000 60 Noise Level (dBV/m) 50 10 MLCC 60 Noise Level (dBV/m) Noise Level (dBV/m) 60 50 40 30 20 10 0 200 400 600 Frequency (MHz) 800 1000 50 40 30 20 10 0 200 400 600 Frequency (MHz) 800 1000 Noise suppression effect of NFM series is better than MLCCs. (1 NFM is better than 4 MLCCs) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 114 NFM Series Power Lines Type Chip EMIFILr NFM21P NFM21P Series (0805 Size) 6A max, 0805 size chip 3-terminal capacitor for power lines. Dimensions 0.30.2 Chip Ferrite Bead *Please refer to the products which are designed for both power lines and signal lines. Equivalent Circuit 0.40.2 Output (3) 0.850.1 (1) Input No polarity. GND 0.60.2 (2) 1.250.1 2.00.2 (2) Packaging (3) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM21PC104R1E3p 0.1F+20%-20% 2A 25Vdc 1000M ohm -55C to +125C NFM21PC224R1C3p 0.22F+20%-20% 2A 16Vdc 1000M ohm -55C to +125C NFM21PC474R1C3p 0.47F+20%-20% 2A 16Vdc 1000M ohm -55C to +125C NFM21PC105B1A3p 1.0F+20%-20% 4A 10Vdc 500M ohm -40C to +85C NFM21PC105B1C3p 1.0F+20%-20% 4A 16Vdc 500M ohm -40C to +85C NFM21PC225B0J3p 2.2F+20%-20% 4A 6.3Vdc 200M ohm -40C to +85C NFM21PC475B1A3p 4.7F+20%-20% 6A 10Vdc 100M ohm -40C to +85C Power Lines Type Chip EMIFILr (2) 0.250.2 (1) Number of Circuit: 1 Chip Common Mode Choke Coil Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFM21PC104R1E3 NFM21PC224R1C3 Insertion Loss (dB) 20 NFM21PC474R1C3 NFM21PC105B1A3 (10V) NFM21PC105B1C3 (16V) 40 60 NFM21PC225B0J3 NFM21PC475B1A3 80 1 10 Frequency (MHz) 100 1000 3000 Block Type EMIFILr 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 115 NFM Series Power Lines Type Chip EMIFILr NFM3DP NFM3DP Series (1205 Size) 1205 size 3-terminal capacitor for power lines. Chip Ferrite Bead *Please refer to the products which are designed for both power lines and signal lines. Equivalent Circuit 0.70.2 Dimensions (1) Input Output (3) 1.10.3 3.20.2 No polarity. 1.250.2 GND (2) (2) (3) 0.250.2 (1) Packaging (2) : Electrode 0.30.2 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 Chip EMIFILr Power Lines Type (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM3DPC223R1H3p 0.022F+20%-20% 2A 50Vdc 1000M ohm -55C to +125C Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 20 60 2.0 80 100 0.1 1 10 Frequency (MHz) 100 1000 3000 Rated Current (A) Insertion Loss (dB) 40 When NFM3DP series is used in operating temperatures exceeding +85C, derating of current is necessary. Please apply the derating curve shown in chart according to the operating temperature. 0.5 0 -55 85 Operating Temperature (C) 125 Block Type EMIFILr Chip Common Mode Choke Coil NFM3DPC223R1H3 Notice (Rating) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 116 NFM Series Power Lines Type Chip EMIFILr NFM31P NFM31P Series (1206 Size) 6A/27microF, 1206 size chip 3-terminal capacitor for power lines. Dimensions 0.40.3 1.10.3 Chip Ferrite Bead *Please refer to the products which are designed for both power lines and signal lines. Equivalent Circuit 0.40.3 1.60.2 Output (3) 1.30.2 (1) Input No polarity. GND 3.20.2 (2) (2) (2) Packaging 0.30.2 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 3000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM31PC276B0J3p 27F+20%-20% 6A 6.3Vdc 20M ohm -40C to +85C Power Lines Type Chip EMIFILr (3) 1.60.2 (1) Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFM31PC276B0J3 40 60 Chip Common Mode Choke Coil Insertion Loss (dB) 20 80 1 10 Frequency (MHz) 100 1000 3000 Block Type EMIFILr 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 117 NFM Series Power Lines Type Chip EMIFILr NFM41P NFM41P Series (1806 Size) 6A max, 1806 size chip 3-terminal capacitor for power lines. Chip Ferrite Bead *Please refer to the products which are designed for both power lines and signal lines. Dimensions 0.40.3 Equivalent Circuit 1.60.3 1.50.3 Output (3) 1.00.2 (1) Input No polarity. GND 0.7 min. (2) 4.50.3 (2) (3) (2) Packaging 1.60.3 (1) 0.3+0.3 -0.2 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 : Electrode Chip EMIFILr Power Lines Type (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM41PC204F1H3p 0.2F+80%-20% 2A 50Vdc 1000M ohm -55C to +85C NFM41PC155B1E3p 1.5F+20%-20% 6A 25Vdc 300M ohm -55C to +85C Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 Insertion Loss (dB) 40 60 80 NFM41PC204F1H3 NFM41PC155B1E3 100 1 10 100 Frequency (MHz) 1000 3000 Block Type EMIFILr Chip Common Mode Choke Coil 20 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 118 NFM Series Power Lines Type Chip EMIFILr NFM55P NFM55P Series (2220 Size) 50V/6A/1.5microF, large capacitance chip 3-terminal capacitor. Equivalent Circuit 2.20.3 Dimensions Chip Ferrite Bead *Please refer to the products which are designed for both power lines and signal lines. (1) Input 1.7+0.3 -0.2 4.7+0.5 -0.3 5.70.3 5.00.3 Output (3) No polarity. GND (2) (2) Packaging (3) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 500 B Bulk(Bag) 100 : Electrode (2) (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM55PC155F1H4p 1.5F+80%-20% 6A 50Vdc 100M ohm -55C to +85C Power Lines Type Chip EMIFILr (1) Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFM55PC155F1H4 40 60 Chip Common Mode Choke Coil Insertion Loss (dB) 20 80 1 10 Frequency (MHz) 100 1000 3000 Block Type EMIFILr 100 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 119 NFM Series Signal Lines Type Chip EMIFILr NFM18C NFM18C Series (0603 Size) Chip Ferrite Bead 0603 size general 3-terminal capacitor. Dimensions 0.250.1 Equivalent Circuit 0.40.1 0.80.1 Output (3) 0.60.1 (1) Input No polarity. GND (2) 0.2 min. 1.60.1 (2) (3) 0.80.1 (1) Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (2) 0.20.1 Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM18CC220U1C3p 22pF+20%-20% 400mA 16Vdc 1000M ohm -55C to +125C NFM18CC470U1C3p 47pF+20%-20% 400mA 16Vdc 1000M ohm -55C to +125C NFM18CC101R1C3p 100pF+20%-20% 500mA 16Vdc 1000M ohm -55C to +125C NFM18CC221R1C3p 220pF+20%-20% 500mA 16Vdc 1000M ohm -55C to +125C NFM18CC471R1C3p 470pF+20%-20% 500mA 16Vdc 1000M ohm -55C to +125C NFM18CC102R1C3p 1000pF+20%-20% 600mA 16Vdc 1000M ohm -55C to +125C NFM18CC222R1C3p 2200pF+20%-20% 700mA 16Vdc 1000M ohm -55C to +125C NFM18CC223R1C3p 22000pF+20%-20% 1000mA 16Vdc 1000M ohm -55C to +125C Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 20 Insertion Loss (dB) Chip Common Mode Choke Coil Chip EMIFILr Signal Lines Type (in mm) NFM18CC223R1C3 NFM18CC222R1C3 NFM18CC102R1C3 NFM18CC471R1C3 40 NFM18CC221R1C3 NFM18CC101R1C3 NFM18CC470U1C3 60 NFM18CC220U1C3 1 10 Frequency (MHz) 100 1000 2000 Block Type EMIFILr 80 0.1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 120 NFM Series Signal Lines Type Chip EMIFILr NFM21C NFM21C Series (0805 Size) Dimensions Chip Ferrite Bead 0805 size general 3-terminal capacitor. Equivalent Circuit 0.30.2 Output (3) 0.850.1 (1) Input No polarity. GND 0.60.2 (2) 2.00.2 1.250.1 (2) Packaging (3) 0.2+0.2 -0.1 (2) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM21CC220U1H3p 22pF+20%-20% 700mA 50Vdc 1000M ohm -55C to +125C NFM21CC470U1H3p 47pF+20%-20% 700mA 50Vdc 1000M ohm -55C to +125C NFM21CC101U1H3p 100pF+20%-20% 700mA 50Vdc 1000M ohm -55C to +125C NFM21CC221R1H3p 220pF+20%-20% 700mA 50Vdc 1000M ohm -55C to +125C NFM21CC471R1H3p 470pF+20%-20% 1000mA 50Vdc 1000M ohm -55C to +125C NFM21CC102R1H3p 1000pF+20%-20% 1000mA 50Vdc 1000M ohm -55C to +125C NFM21CC222R1H3p 2200pF+20%-20% 1000mA 50Vdc 1000M ohm -55C to +125C NFM21CC223R1H3p 22000pF+20%-20% 2000mA 50Vdc 1000M ohm -55C to +125C Chip Common Mode Choke Coil Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 Insertion Loss (dB) 20 NFM21CC220U1H3 40 NFM21CC470U1H3 NFM21CC101U1H3 60 NFM21CC221R1H3 NFM21CC471R1H3 80 Signal Lines Type Chip EMIFILr (1) NFM21CC223R1H3 NFM21CC222R1H3 NFM21CC102R1H3 100 10 100 Frequency (MHz) 1000 2000 Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 121 NFM Series Signal Lines Type Chip EMIFILr NFM3DC NFM3DC Series (1205 Size) Chip Ferrite Bead 1205 size general 3-terminal capacitor. Equivalent Circuit 0.70.2 Dimensions (1) Input Output (3) 1.10.3 3.20.2 No polarity. 1.250.2 GND (2) (2) (3) 0.250.2 (1) Packaging (2) 0.30.2 : Electrode Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM3DCC220U1H3p 22pF+50%-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC470U1H3p 47pF+50%-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC101U1H3p 100pF+50%-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC221R1H3p 220pF+50%-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC471R1H3p 470pF+50%-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC102R1H3p 1000pF+50%-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC222R1H3p 2200pF+50%-20% 300mA 50Vdc 1000M ohm -55C to +125C NFM3DCC223R1H3p 22000pF+50%-20% 300mA 50Vdc 1000M ohm -55C to +125C Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 20 Insertion Loss (dB) Chip Common Mode Choke Coil Chip EMIFILr Signal Lines Type (in mm) NFM3DCC223R1H3 40 NFM3DCC222R1H3 NFM3DCC102R1H3 NFM3DCC471R1H3 60 NFM3DCC221R1H3 NFM3DCC101UH3 NFM3DCC470U1H3 80 NFM3DCC220U1H3 100 10 100 Frequency (MHz) 1000 2000 Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 122 NFM Series Signal Lines Type Chip EMIFILr NFM41C NFM41C Series (1806 Size) Equivalent Circuit 1.00.2 Dimensions Chip Ferrite Bead 1806 size general 3-terminal capacitor. (1) Input Output (3) 1.50.3 No polarity. 4.50.3 1.60.3 GND (2) (2) (2) 0.40.3 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 : Electrode (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM41CC220U2A3p 22pF+50%-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC470U2A3p 47pF+50%-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC101U2A3p 100pF+50%-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC221U2A3p 220pF+50%-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC471R2A3p 470pF+50%-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC102R2A3p 1000pF+50%-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC222R2A3p 2200pF+50%-20% 300mA 100Vdc 10000M ohm -55C to +125C NFM41CC223R2A3p 22000pF+50%-20% 300mA 100Vdc 10000M ohm -55C to +125C Chip Common Mode Choke Coil Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 Insertion Loss (dB) 20 NFM41CC223R2A3 40 NFM41CC222R2A3 NFM41CC102R2A3 60 Signal Lines Type Chip EMIFILr Packaging (3) 0.3+0.3 -0.2 (1) NFM41CC471R2A3 NFM41CC221U2A3 NFM41CC101U2A3 80 NFM41CC470U2A3 NFM41CC220U2A3 100 10 100 Frequency (MHz) 1000 2000 Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 123 NFA Series Signal Lines Type Chip EMIFILr NFA31C NFA31C Series (1206 Size) Chip Ferrite Bead 4-lines chip 3-terminal capacitor array, 1206 size. Dimensions Equivalent Circuit Input 3.20.2 (7) 0.80.1 (9) (10) 0.80.2 GND (1) (2) GND (3) (8) (9) (4) (5) (6) 1.10.5 0.40.2 (7) (8) 1.60.2 Output No polarity. (10) Packaging (2) (1) (4) (5) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 100 (6) : Electrode (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFA31CC220S1E4p 22pF+20%-20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC470S1E4p 47pF+20%-20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC101S1E4p 100pF+20%-20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC221S1E4p 220pF+20%-20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC471R1E4p 470pF+20%-20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC102R1E4p 1000pF+20%-20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC222R1E4p 2200pF+20%-20% 200mA 25Vdc 1000M ohm -40C to +85C NFA31CC223R1C4p 22000pF+20%-20% 200mA 16Vdc 1000M ohm -40C to +85C Number of Circuit: 4 Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFA31CC470S1E4 NFA31CC220S1E4 20 Insertion Loss (dB) Chip Common Mode Choke Coil Chip EMIFILr Signal Lines Type (3) 0.05 min. 0.05 min. NFA31CC223R1C4 40 NFA31CC222R1E4 NFA31CC102R1E4 60 NFA31CC471R1E4 NFA31CC221S1E4 NFA31CC101S1E4 80 100 10 100 Frequency (MHz) 1000 2000 Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 124 NFL Series Signal Lines Type Chip EMIFILr NFL18ST NFL18ST Series (0603 Size) Dimensions NFL18ST_H Chip Ferrite Bead T-type LC filter. Reduce waveform distortion of high speed signal. Equivalent Circuit 1.60.1 (Top View) (2) (3) (2) (Side View) 0.30.1 0.20.1 0.80.1 (1) Input (1) Output (3) Folarity Marking GND (2) 0.20.1 0.60.1 No Polarity. Packaging 0.2 min. Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 1000 (Bottom View) : Electrode 0.150.1 Dimensions NFL18ST_X 0.2 min. Signal Lines Type Chip EMIFILr (in mm) Equivalent Circuit 0.2 min. Input (1) (1) Output (3) 0.80.1 (2) (3) GND (2) (2) 0.250.1 0.250.1 0.80.1 0.40.1 No Polarity. 1.60.1 : Electrode (in mm) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 1000 Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Nominal Cut-off Frequency Part Number Capacitance Inductance Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated (Cut-off Frequency) (200MHz) (min.) (300MHz) (min.) (400MHz) (min.) Current Rated Voltage NFL18ST506H1A3p 50MHz 110pF (Typ.) 350nH (Typ.) 6dB max. 30dB 30dB 30dB 75mA 10Vdc NFL18ST706H1A3p 70MHz 70pF (Typ.) 230nH (Typ.) 6dB max. - 30dB 30dB 75mA 10Vdc NFL18ST107H1A3p 100MHz 50pF (Typ.) 150nH (Typ.) 6dB max. - - 30dB 75mA 10Vdc Insulation Resistance (min.): 1000M ohm Withstand Voltage: 30Vdc Operating Temperature Range: -55C to +125C Number of Circuits: 1 Chip Common Mode Choke Coil Packaging Insertion Loss Characteristics (Main Items) NFL18ST_H Series Block Type EMIFILr 0 20 Insertion Loss (dB) NFL18ST506H1A3 NFL18ST706H1A3 40 NFL18ST107H1A3 60 80 100 1 10 100 Frequency (MHz) 1000 10000 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 125 NFL Series Signal Lines Type Chip EMIFILr NFL18ST Series (0603 Size) NFL18ST Chip Ferrite Bead Rated Value (p: packaging code) Nominal Capacitance Cut-off Frequency Part Number Inductance Rated Current Rated Voltage Insulation Resistance (min.) Operating Withstand Voltage Temperature Range NFL18ST207X1C3p 200MHz 25pF20% 110nH20% 150mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL18ST307X1C3p 300MHz 18pF20% 62nH20% 200mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL18ST507X1C3p 500MHz 10pF20% 43nH20% 200mA 16Vdc 1000M ohm 50Vdc -55C to +125C Number of Circuits: 1 Insertion Loss Characteristics (Main Items) NFL18ST_X Series (50 - 50) 0 NFL18ST507X1C3 Insertion Loss (dB) Chip EMIFILr Signal Lines Type 20 NFL18ST307X1C3 NFL18ST207X1C3 40 60 80 10 100 Frequency (MHz) 1000 5000 Block Type EMIFILr Chip Common Mode Choke Coil 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 126 NFL Series Signal Lines Type Chip EMIFILr NFL18SP NFL18SP Series (0603 Size) Dimensions (2) Chip Ferrite Bead PI-type LC filter. Reduce waveform distortion of high speed signal. Equivalent Circuit 0.150.1 (1) Input Output (3) (3) 0.80.1 (1) (1) (3) (2) GND (2) 1.60.1 0.2 min. No polarity. 0.30.1 0.40.1 0.30.1 0.150.1 0.150.1 : Electrode (in mm) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 1000 Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Nominal Capacitance Cut-off Frequency Part Number Inductance Rated Current Rated Voltage Insulation Resistance (min.) Operating Withstand Voltage Temperature Range NFL18SP157X1A3p 150MHz 34pF20% 100nH20% 100mA 10Vdc 1000M ohm 30Vdc -55C to +125C NFL18SP207X1A3p 200MHz 24pF20% 80nH20% 100mA 10Vdc 1000M ohm 30Vdc -55C to +125C NFL18SP307X1A3p 300MHz 19pF20% 60nH20% 100mA 10Vdc 1000M ohm 30Vdc -55C to +125C NFL18SP507X1A3p 500MHz 11pF20% 38nH20% 100mA 10Vdc 1000M ohm 30Vdc -55C to +125C Signal Lines Type Chip EMIFILr 0.60.1 Packaging Number of Circuits: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFL18SP157X1A3 Insertion Loss (dB) Chip Common Mode Choke Coil NFL18SP207X1A3 20 NFL18SP307X1A3 NFL18SP507X1A3 40 60 80 10 100 Frequency (MHz) 1000 2000 Block Type EMIFILr 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 127 NFL Series Signal Lines Type Chip EMIFILr NFL21SP NFL21SP Series (0805 Size) Chip Ferrite Bead PI-type LC filter. Reduce waveform distortion of high speed signal. Dimensions 0.30.2 Equivalent Circuit 0.40.2 Output (3) 0.850.1 (1) Input 0.60.2 GND (2) 2.00.2 No polarity. (1) 1.250.1 (2) (3) (2) 0.250.2 : Electrode Packaging Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 1000 Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Part Number Nominal Cut-off Frequency Rated Current Rated Voltage Insulation Resistance (min.) NFL21SP106X1C3p 10MHz 670pF20% 680nH20% 100mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP206X1C7p NFL21SP506X1C3p 20MHz 240pF20% 700nH20% 100mA 16Vdc 1000M ohm 50Vdc -55C to +125C 50MHz 84pF20% 305nH20% 150mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP706X1C3p 70MHz 76pF20% 185nH20% 150mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP107X1C3p 100MHz 44pF20% 135nH20% 200mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP157X1C3p 150MHz 28pF20% 128nH20% 200mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP207X1C3p 200MHz 22pF20% 72nH20% 250mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP307X1C3p 300MHz 19pF10% 45nH10% 300mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP407X1C3p 400MHz 16pF10% 34nH10% 300mA 16Vdc 1000M ohm 50Vdc -55C to +125C NFL21SP507X1C3p 500MHz 12pF10% 31nH10% 300mA 16Vdc 1000M ohm 50Vdc -55C to +125C Inductance Withstand Operating Voltage Temperature Range Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFL21SP106X1C3 NFL21SP206X1C7 NFL21SP506X1C3 NFL21SP706X1C3 NFL21SP107X1C3 20 40 NFL21SP157X1C3 NFL21SP207X1C3 NFL21SP307X1C3 NFL21SP407X1C3 NFL21SP507X1C3 60 Block Type EMIFILr Capacitance Number of Circuits: 1 Insertion Loss (dB) Chip Common Mode Choke Coil Chip EMIFILr Signal Lines Type (in mm) 80 1 10 100 Frequency (MHz) 1000 2000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 128 NFA Series Signal Lines Type Chip EMIFILr NFA18SL NFA18SL Series (0603 Size) Dimensions 1.60.1 Equivalent Circuit (Top View) (4) (5) (6) (1) GND GND (2) (7) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) 0.20.1 Polarity Marking 0.250.1 Dimensions (3) (4) (5) Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 1000 (3) GND (2) (7) (8) (9) (10) (5) (6) GND (1) (2) GND (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (7) 0.40.05 (8) (9) (10) 0.250.1 0.6+0.05 -0.1 (Side View) (4) (6) 0.20.1 Polarity Marking Packaging 0.20.1 (Bottom View) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 1000 : Electrode (in mm) Dimensions Equivalent Circuit 1.60.1 (Top View) (3) (4) (5) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (6) GND (1) (2) GND (7) (8) 0.80.1 NFA18SL 307/407/487 V1A45 Packaging Equivalent Circuit (1) GND 0.150.1 (2) GND Code 1.60.1 (Top View) 0.80.1 NFA18SL227V1A45 GND (1) Packaging Part Number T NFA18SL357V1A45 0.50.1 NFA18SL137V1A45 NFA18SL187V1A45 +0.05 0.6-0.1 NFA18SL207V1A45 NFA18SL506X1A45 (in mm) (Bottom View) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (6) (7) (8) (9) (10) *Please change IN/OUT according to the circuit condition. T 0.20.1 (5) : Electrode 0.40.05 (Side View) (4) (3) (4) (5) Chip Common Mode Choke Coil 0.150.1 (8) (9) (10) (3) Signal Lines Type Chip EMIFILr (3) 0.80.1 NFA18SL 137/187/207/357 V1A45 NFA18SL506X1A45 Chip Ferrite Bead LC filter 4-lines array for mobile phones. (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (6) GND (1) (2) GND (9) (10) Polarity Marking 0.50.1 (Side View) 0.20.1 0.40.05 (7) (8) (9) (10) *Please change IN/OUT according to the circuit condition. Packaging 0.250.1 0.150.1 (Bottom View) 0.200.1 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 1000 : Electrode (in mm) Refer to pages from p.139 to p.144 for mounting information. Part Number Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated Rated Cut-off (Cut-off (470MHz) (800MHz) (900MHz) (2000MHz) Current Voltage Frequency Frequency) (min.) (min.) (min.) (min.) Insulation Resistance (min.) Withstand Voltage NFA18SL137V1A45p 130MHz 6dBmax 25dB - 25dB - 50mA 10Vdc 1000M ohm 30Vdc NFA18SL187V1A45p 180MHz 6dBmax 20dB - 20dB - 50mA 10Vdc 1000M ohm 30Vdc NFA18SL207V1A45p 200MHz 6dBmax 15dB - 15dB - 50mA 10Vdc 1000M ohm 30Vdc NFA18SL227V1A45p 220MHz 6dBmax - - 30dB 30dB 25mA 10Vdc 1000M ohm 30Vdc NFA18SL307V1A45p 300MHz 6dBmax - 20dB 20dB - 100mA 10Vdc 1000M ohm 30Vdc NFA18SL357V1A45p 350MHz 6dBmax - - 15dB 13dB 35mA 10Vdc 1000M ohm 30Vdc NFA18SL407V1A45p 400MHz 6dBmax - 18dB 18dB - 100mA 10Vdc 1000M ohm 30Vdc NFA18SL487V1A45p 480MHz 6dBmax - 15dB 15dB - 100mA 10Vdc 1000M ohm 30Vdc Operating Temperature Range: -40C to +85C (NFA18SL 137/187/207/227/357 V1A45), -55C to +125C (NFA18SL 307/407/487 V1A45) Number of Circuits: 4 Block Type EMIFILr Rated Value (p: packaging code) Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 129 NFA Series Signal Lines Type Chip EMIFILr NFA18SL Series (0603 Size) NFA18SL NFA18SL 137/187/207 V1A45 NFA18SL227V1A45 (50 - 50) 0 0 NFA18SL207V1A45 NFA18SL137V1A45 20 20 NFA18SL187V1A45 Insertion Loss (dB) Insertion Loss (dB) Chip Ferrite Bead Insertion Loss Characteristics (Main Items) 40 80 10 100 Frequency (MHz) 1000 80 10 3000 NFA18SL 307/407/487 V1A45 100 Frequency (MHz) 1000 3000 NFA18SL357V1A45 (50 - 50) 0 0 NFA18SL307V1A45 NFA18SL407V1A45 NFA18SL487V1A45 NFA18SL357V1A45 20 Insertion Loss (dB) 20 Insertion Loss (dB) Chip EMIFILr Signal Lines Type NFA18SL227V1A45 60 60 40 40 60 60 80 10 Chip Common Mode Choke Coil 40 100 Frequency (MHz) 1000 3000 80 10 100 1000 10000 Frequency (MHz) Rated Value (p: packaging code) Part Number Nominal Cut-off Frequency Insertion Loss (Cut-off Frequency) Insertion Loss at 500MHz (min.) Insertion Loss at 1000MHz (min.) Rated Voltage Rated Current Insulation Resistance (min.) Withstand Voltage NFA18SL506X1A45p 50MHz 6dBmax 30dB 25dB 10Vdc 25mA 1000M ohm 30Vdc Operating Temperature Range: -40C to +85C Number of Circuits: 4 Insertion Loss Characteristics (Main Items) NFA18SL_X (50 - 50) 0 NFA18SL506X1A45 Insertion Loss (dB) Block Type EMIFILr 20 40 60 80 10 100 Frequency (MHz) 1000 3000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 130 NFA Series Signal Lines Type Chip EMIFILr NFA18SD NFA18SD Series (0603 Size) Dimensions Chip Ferrite Bead For differential signal I/F of LCD or camera in mobile phones. Equivalent Circuit 1.60.1 (4) (5) (6) (1) GND GND (2) (7) 0.150.1 (3) (8) (9) (10) 0.20.1 Polarity Marking 0.40.05 (5) (6) GND (1) (2) GND (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (7) 0.250.1 0.6+0.05 -0.1 (Side View) (4) (9) (10) Packaging 0.20.1 (Bottom View) (8) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 1000 : Electrode (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insulation Resistance Withstand Rated Voltage Rated Current Cut-off (min.) Voltage Frequency (Cut-off Frequency) (500MHz) (min.) (900MHz) (min.) (1500MHz) (min.) (2000MHz) (min.) Part Number NFA18SD187X1A45p 180MHz 6dBmax 15dB 20dB 20dB 20dB 10Vdc 25mA 1000M ohm 30Vdc NFA18SD207X1A45p 200MHz 6dBmax 13dB 20dB 20dB 20dB 10Vdc 25mA 1000M ohm 30Vdc Signal Lines Type Chip EMIFILr (3) 0.80.1 (Top View) Operating Temperature Range: -40C to +85C Number of Circuits: 4 Insertion Loss Characteristics (Main Items) (50 - 50) 0 10 NFA18SD187X1A45 20 Chip Common Mode Choke Coil Insertion Loss (dB) NFA18SD207X1A45 30 40 100 Frequency (MHz) 1000 3000 Block Type EMIFILr 50 10 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 131 NFA Series Signal Lines Type Chip EMIFILr NFA21SL NFA21SL Series (0805 Size) Chip Ferrite Bead L-type LC filter 4-lines array for mobile phones. Dimensions Equivalent Circuit Polarity Marking 2.00.1 (3) (4) (5) (6) GND (2) 0.250.1 (1) GND 0.20.15 (7) (8) (9) (10) 0.20.15 0.15 min. (4) (5) (6) (1) GND GND (2) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) (7) 0.250.1 (8) (9) (10) Packaging T 0.250.1 (3) 1.250.1 (Top View) 0.50.05 Part Number T NFA21SLpppX1A45p 0.50.1 NFA21SLpppV1A45p NFA21SLpppX1A48p 0.850.1 NFA21SLpppV1A48p (Bottom View) Chip EMIFILr Signal Lines Type : Electrode Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 1000 (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Insulation Resistance (min.) Withstand Voltage 100mA 1000M ohm 30Vdc 10Vdc 100mA 1000M ohm 30Vdc 10Vdc 100mA 1000M ohm 30Vdc 25dB 10Vdc 100mA 1000M ohm 30Vdc 20dB 10Vdc 100mA 1000M ohm 30Vdc 20dB 10Vdc 100mA 1000M ohm 30Vdc Part Number Nominal Cut-off Frequency Insertion Loss (Cut-off Frequency) Insertion Loss at 800MHz (min.) Insertion Loss at 900MHz (min.) NFA21SL287V1A45p 280MHz 6dBmax 25dB 25dB 10Vdc NFA21SL317V1A45p 310MHz 6dBmax 20dB 20dB NFA21SL337V1A45p 330MHz 6dBmax 15dB 15dB NFA21SL287V1A48p 280MHz 6dBmax 25dB NFA21SL317V1A48p 310MHz 6dBmax 20dB NFA21SL337V1A48p 330MHz 6dBmax 20dB Rated Voltage Rated Current Operating Temperature Range: -55C to +125C Number of Circuits: 4 NFA21SL_V1A45 NFA21SL_V1A48 (50 - 50) 0 (50 - 50) NFA21SL337V1A48 0 NFA21SL287V1A45 NFA21SL317V1A45 NFA21SL337V1A45 20 NFA21SL287V1A48 20 Insertion Loss (dB) NFA21SL317V1A48 Insertion Loss (dB) Chip Common Mode Choke Coil Insertion Loss Characteristics (Main Items) 40 40 60 60 80 10 100 Frequency (MHz) 1000 3000 80 10 100 Frequency (MHz) 1000 3000 Block Type EMIFILr Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 132 NFA Series Signal Lines Type Chip EMIFILr NFA21SL Series (0805 Size) NFA21SL Part Number Nominal Cut-off Frequency Insertion Loss (Cut-off Frequency) Insertion Loss at 500MHz (min.) Insertion Loss at 800MHz (min.) Insertion Loss at 1000MHz (min.) Rated Voltage Rated Current Insulation Resistance (min.) Withstand Voltage NFA21SL207X1A45p 200MHz 2 to 7 13dB 25dB 25dB 10Vdc 100mA 1000M ohm 30Vdc NFA21SL307X1A45p 300MHz 2 to 7 7dB 20dB 25dB 10Vdc 100mA 1000M ohm 30Vdc NFA21SL506X1A48p 50MHz 0 to 6 30dB - 20dB 10Vdc 20mA 1000M ohm 30Vdc NFA21SL806X1A48p 80MHz 2 to 7 25dB - 25dB 10Vdc 20mA 1000M ohm 30Vdc NFA21SL207X1A48p 200MHz 2 to 7 13dB 25dB 25dB 10Vdc 100mA 1000M ohm 30Vdc NFA21SL307X1A48p 300MHz 2 to 7 7dB 20dB 25dB 10Vdc 100mA 1000M ohm 30Vdc Chip Ferrite Bead Rated Value (p: packaging code) Operating Temperature Range: -55C to +125C Number of Circuits: 4 Insertion Loss Characteristics (Main Items) NFA21SL_X (50 - 50) 0 NFA21SL806X1A48 NFA21SL207X1A45(48) NFA21SL307X1A45(48) 20 Insertion Loss (dB) Signal Lines Type Chip EMIFILr NFA21SL506X1A48 40 60 80 10 100 Frequency (MHz) 1000 3000 Block Type EMIFILr Chip Common Mode Choke Coil 1 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 133 NFW Series Signal Lines Type Chip EMIFILr NFW31S NFW31S Series (1206 Size) Chip Ferrite Bead Wire-wound PI-type LC filter. Dimensions Equivalent Circuit 2.30.2 Output (3) 1.80.2 (1) Input GND (2) 1.60.2 3.20.3 No polarity. (1) (2) (3) Packaging (1): Input electrode (2): Ground electrode (3): Output electrode * No polarity. 0.70.3 Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 2000 K 330mm Reel Embossed Tape 7500 : Electrode 0.70.3 0.650.2 Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Cut-off Frequency at 10MHz at 20MHz at 50MHz at 100MHz at 150MHz at 200MHz at 300MHz at 400MHz at 500MHz at 1000MHz Part Number NFW31SP106X1E4p 10MHz 6dBmax. 5dBmin. 25dBmin. 25dBmin. - 25dBmin. - - 30dBmin. 30dBmin. NFW31SP206X1E4p 20MHz - NFW31SP506X1E4p 50MHz - - - 25dBmin. - - 30dBmin. 30dBmin. - 30dBmin. - - 30dBmin. 30dBmin. NFW31SP107X1E4p 100MHz - - - NFW31SP157X1E4p 150MHz - - - 6dBmax. - 5dBmin. - - 20dBmin. 30dBmin. - 6dBmax. - NFW31SP207X1E4p 200MHz - - - - - 6dBmax. - NFW31SP307X1E4p 300MHz - NFW31SP407X1E4p 400MHz - - - - - - - - - - - NFW31SP507X1E4p 500MHz - - - - - - 6dBmax. 5dBmin. 25dBmin. 6dBmax. 10dBmin. 10dBmin. 20dBmin 30dBmin. 30dBmin. - 10dBmin. 30dBmin. 6dBmax. - 5dBmin. 15dBmin. - 6dBmax. - - - 10dBmin. 6dBmax. 10dBmin. Rated Current: 200mA Rated Voltage: 25Vdc Operating Temperature Range: -40C to +85C Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFW31SP157X1E4 NFW31SP207X1E4 20 Insertion Loss (dB) Chip Common Mode Choke Coil Chip EMIFILr Signal Lines Type (in mm) NFW31SP307X1E4 NFW31SP407X1E4 NFW31SP507X1E4 40 NFW31SP106X1E4 NFW31SP206X1E4 NFW31SP506X1E4 60 NFW31SP107X1E4 80 Block Type EMIFILr 1 10 100 Frequency (MHz) 1000 2000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 134 NFW31 Series Measuring Circuit Example of EMI Suppression in an Actual Circuit EMI Suppression Filter 74ALS04 Chip Ferrite Bead EMI Suppression Effect 74ALS00 Measuring Point 10MHz Type of Filter ( ) Signal Wave Form 20ns/div 1V/div / EMI Suppression Effect / Description 60 40 20 0 ) 500 Noise Spectrum (10:1 Active Probe) NFW31S Series (Cut-off frequency 50MHz) Noise Level (dBV/m) 100 80 NFW31S's steep attenuation characteristic means excellent EMI suppression without waveform cornering. Level before filter mounting 60 40 20 0 400 100 200 300 Frequency (MHz) 500 Conventional Chip Solid Type EMI Filter (NFM41CC 470pF) Noise Level (dBV/m) 100 80 40 20 L C L: Chip Inductor C: Chip Capacitor (270pF) 100 Noise Level (dBV/m) L 3-terminal capacitors suppress signal frequencies as EMI frequencies so the signal waveform is distorted. Level before filter mounting 60 0 Filter Combined with Conventional LCs Chip Common Mode Choke Coil ( Signal Waveform 20ns/div 1V/div 400 100 200 300 Frequency (MHz) 80 400 100 200 300 Frequency (MHz) 500 Level before filter mounting 60 40 20 0 400 100 200 300 Frequency (MHz) 500 Block Type EMIFILr Signal Waveform and Noise Spectrum before Filter Mounting 80 Signal Lines Type Chip EMIFILr Noise Level (dBV/m) 100 Combinations of inductors and capacitors can yield a steep attenuation characteristic, but they require a great deal more mounting space. Moreover, at high frequencies the EMI suppression is less than that obtained by NFW31S. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 135 NFR Series Signal Lines Type Chip EMIFILr NFR21G NFR21G Series (0805 Size) Chip Ferrite Bead 3-terminal RC filter, damp the noise current and return back to ground. Dimensions Equivalent Circuit (Top View) (1) Input 0.50.2 1.0 max. (2) 1.00.35 0.950.35 2.00.2 1.250.2 No polarity Packaging (3) 0.3+0.2 -0.25 (1) Code Packaging Minimum Quantity L 180mm Reel Embossed Tape 4000 B Bulk(Bag) 500 0.3+0.2 -0.25 (2) : Electrode (in mm) Refer to pages from p.139 to p.144 for mounting information. Rated Value (p: packaging code) Insulation Resistance (min.) Operating Temperature Range 50Vdc 1000M ohm -40C to +85C 35mA 50Vdc 1000M ohm -40C to +85C 50mA 50Vdc 1000M ohm -40C to +85C 47ohm30% 35mA 50Vdc 1000M ohm -40C to +85C 68ohm30% 30mA 50Vdc 1000M ohm -40C to +85C 47pF20% 100ohm30% 25mA 50Vdc 1000M ohm -40C to +85C NFR21GD1012202p 100pF20% 22ohm30% 50mA 50Vdc 1000M ohm -40C to +85C NFR21GD1014702p 100pF20% 47ohm30% 35mA 50Vdc 1000M ohm -40C to +85C NFR21GD1016802p 100pF20% 68ohm30% 30mA 50Vdc 1000M ohm -40C to +85C NFR21GD1011012p 100pF20% 100ohm30% 25mA 50Vdc 1000M ohm -40C to +85C Part Number Capacitance DC Resistance Rated Current Rated Voltage NFR21GD1002202p 10pF20% 22ohm30% 50mA NFR21GD1004702p 10pF20% 47ohm30% NFR21GD4702202p 47pF20% 22ohm30% NFR21GD4704702p 47pF20% NFR21GD4706802p 47pF20% NFR21GD4701012p Number of Circuit: 1 Insertion Loss Characteristics (Main Items) (50 - 50) 0 (50 - 50) 0 NFR21GD4701012 10 10 NFR21GD1002202 NFR21GD1004702 Insertion Loss (dB) Insertion Loss (dB) Chip EMIFILr Signal Lines Type GND (2) (Bottom View) Chip Common Mode Choke Coil Output (3) NFR21GD4702202 20 NFR21GD4704702 NFR21GD4706802 NFR21GD1012202 30 NFR21GD1014702 20 NFR21GD1011012 30 NFR21GD1016802 40 Block Type EMIFILr 40 50 50 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 136 NFA Series Signal Lines Type Chip EMIFILr NFA31G NFA31G Series (1206 Size) Dimensions (8) Equivalent Circuit (9) Input (10) (7) (1) (8) (9) (10) (2) (2)GND (1)GND (3) (4) (6) 0.80.1 (3) 1.10.5 3.20.2 (5) (6) Packaging 1.60.2 (Bottom View) Code Packaging Minimum Quantity D 180mm Reel Paper Tape 4000 B Bulk(Bag) 100 : Electrode 0.05 min. 0.05 min. (4) Output No polarity. 0.80.2 0.40.15 (5) (in mm) Refer to pages from p.139 to p.144 for mounting information. Part Number Capacitance DC Resistance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFA31GD1006R84p 10pF20% 6.8ohm40% 50mA 6Vdc 1000M ohm -40C to +85C NFA31GD1004704p 10pF20% 47ohm30% 20mA 6Vdc 1000M ohm -40C to +85C NFA31GD1001014p 10pF20% 100ohm30% 15mA 6Vdc 1000M ohm -40C to +85C NFA31GD4706R84p 47pF20% 6.8ohm40% 50mA 6Vdc 1000M ohm -40C to +85C NFA31GD4703304p 47pF20% 33ohm30% 20mA 6Vdc 1000M ohm -40C to +85C NFA31GD4704704p 47pF20% 47ohm30% 20mA 6Vdc 1000M ohm -40C to +85C NFA31GD4701014p 47pF20% 100ohm30% 15mA 6Vdc 1000M ohm -40C to +85C NFA31GD1016R84p 100pF20% 6.8ohm40% 50mA 6Vdc 1000M ohm -40C to +85C NFA31GD1014704p 100pF20% 47ohm30% 20mA 6Vdc 1000M ohm -40C to +85C NFA31GD1011014p 100pF20% 100ohm30% 15mA 6Vdc 1000M ohm -40C to +85C Chip Common Mode Choke Coil Rated Value (p: packaging code) Number of Circuit: 4 Insertion Loss Characteristics (Main Items) (50 - 50) 0 10 (50 - 50) 0 10 NFA31GD1006R84 Insertion Loss (dB) 20 NFA31GD1016R84 30 40 NFA31GD4704704 20 NFA31GD1014704 30 40 50 50 1 10 100 Frequency (MHz) 0 1000 2000 1 (50 - 50) 10 100 Frequency (MHz) 0 1000 2000 (50 - 50) 10 10 NFA31GD1001014 NFA31GD4703304 Insertion Loss (dB) Insertion Loss (dB) Block Type EMIFILr Insertion Loss (dB) NFA31GD1004704 NFA31GD4706R84 Signal Lines Type Chip EMIFILr (7) (Top View) Chip Ferrite Bead 3-terminal RC filter array. NFA31GD4701014 20 NFA31GD1011014 30 20 30 40 40 50 50 1 10 100 Frequency (MHz) 1000 2000 1 10 100 Frequency (MHz) 1000 2000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 137 Chip EMIFILr !Caution/Notice Chip Ferrite Bead !Caution Soldering and Mounting Rating Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. * Self-heating Please provide special attention when mounting chip EMIFILr NFM_P series in close proximity to other products that radiate heat. The heat generated by other products may deteriorate the insulation resistance and cause excessive heat in this component. Notice Handling <Operating Environment> Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. Do not use products in the environment close to the organic solvent. <Storage and Handling Requirements> 1. Storage Period NFM55P series should be used within 6 months, the other series should be used within 12 months. Solderability should be checked if this period is exceeded. 2. Storage Conditions (1) Storage temperature: -10 to +40C Relative humidity: 15 to 85% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 1. Resin Coating Using resin for coating/molding products may affect the products performance. So please pay careful attention in selecting resin. Prior to use, please make the reliability evaluation with the product mounted in your application set. 2. Caution for Use (NFW Series) When you hold products with a tweezer, please hold by the sides. Sharp materials, such as a pair of tweezers or other material such as bristles of cleaning brush, should not touch the winding portion of this product to prevent breaking the wire. Mechanical shock should not be applied to the products mounted on the board to prevent breaking the core. 3. Handling of a Substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the Product. Chip Common Mode Choke Coil !Caution/ Notice Chip EMIFILr Storage and Operating Conditions Notice (Soldering and Mounting) Block Type EMIFILr 1. Cleaning Failure and degradation of a product are caused by the cleaning method. When you clean in conditions that are not in mounting information, please contact Murata engineering. 2. Soldering Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in mounting information. 3. Other Noise suppression levels resulting from Murata's EMI suppression filters EMIFILr may vary, depending on the circuits and ICs used, type of noise, mounting pattern, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercialpurpose equipment design. Bending Twisting !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 138 NFp Soldering and Mounting Chip EMIFILr NFp series suppress noise by conducting the high-frequency noise element to ground. Therefore, to obtain maximum performance from these filters, the ground pattern should be made as large as possible during the PCB design stage. As shown below, one side of the PCB is used for chip mounting, and the other is used for grounding. Small diameter feedthrough holes are then used to connect the grounds on each side of the PCB. This reduces the highfrequency impedance of the grounding and maximizes the filter's performance. Land Pattern + Solder Resist Land Pattern Solder Resist Reflow Soldering NFM18C/NFM18PC/NFL18ST (in mm) NFM18PS Small diameter thru hole o0.2 0.4 0.6 1.0 2.2 0.8 1.2 2.0 0.05 NFL18SP Chip EMIFILr 0.4 0.6 1.2 0.4 0.1 1.2 1.5 Small diameter thru hole o0.2-o0.3 1.5 NFM55P Small diameter thru hole o1.0-o2.0 Small diameter thru hole o0.2-o0.3 0.4 Chip 3.5 5.0 6.4 6.5 1.2 0.8 0.8 Soldering and Mounting NFM18 NFL18 NFM55P 1.0 1.5 2.0 2.0 4.7 6.7 Chip Common Mode Choke Coil 0.4 Please contact us if using thinner land pad than 18m. * NFp18, NFM55P are specially adapted for reflow soldering. o Reflow Soldering Chip mounting side o Flow Soldering Chip mounting side NFM21C/NFR21G NFM21PC/NFL21S NFM3DC/NFM3DP/ NFM31P NFM41C/NFM41P Small diameter thru hole o0.4 Small diameter thru hole o0.4 Small diameter thru hole o0.4 0.6 e f g 0.6 e f g 0.6 e f g NFM21C NFM21P NFM3D NFM31P NFM41 NFR21G NFL21S Chip Ferrite Bead 1. Standard Land Pattern Dimensions NFM21P/NFL21S a b 0.6 - c d e Size (mm) Part Number f a g 1.4 2.6 0.8 1.9 2.3 NFM3DC NFM3DP NFM3DC/NFM3DP 1.0 1.4 2.5 4.4 1.0 2.0 2.4 NFM31P NFM31P 1.0 1.4 2.5 4.4 1.2 2.6 3.0 NFM41C NFM41C/NFM41P 1.5 2.0 3.5 6.0 1.2 2.6 3.0 NFM41P Block Type EMIFILr Size (mm) Part Number NFM21C/NFR21G a b c d a b c d a c d b c d e f g 1.0 1.4 2.5 4.4 1.0 2.0 2.4 1.0 1.4 2.5 4.4 1.2 2.6 3.0 1.5 2.0 3.5 6.0 1.2 2.6 3.0 * NFp21 is specially adapted for reflow soldering. Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 139 NFp Chip EMIFILr Soldering and Mounting Land Pattern Solder Resist NFA18S Small diameter thru hole o0.2 NFA31G NFA31C NFW31S NFE31P o Reflow and Flow NFW31S o Reflow Soldering NFE31P o0.4 Small diameter thru hole o0.4 0.8 Pitch 3.8 0.6 1.2 2.2 4.2 4.2 o Reflow Soldering Small diameter thru hole o0.4 1.6 2.6 3.0 Small diameter thru hole o0.4 o Flow Soldering 0.6 1.2 Chip Common Mode Choke Coil NFE61P 2.0 4.8 8.8 3.2 3.6 0.3 2.6 3.0 1.0 R0.1 to R0.2 is preferred to obtain high voltage withstanding Soldering and Mounting 1.75 1.5 o Reflow Soldering NFA31G/31C 2.6 0.25 Filled via o0.1 0.4 1.0 2.2 Chip EMIFILr 0.5 0.25 0.25 0.35 1.3 2.0 2.35 2.5 0.25 0.25 0.5 1.375 0.225 0.4 0.175 0.05 (in mm) NFA21S 0.5 Reflow Soldering 0.275 0.175 NFA18S NFA21S 1.2 0.5 Chip Ferrite Bead Land Pattern + Solder Resist 1.5 3.8 4.8 9.0 o PCB Warping Block Type EMIFILr PCB should be designed so that products are not subjected to the mechanical stress caused by warping the board. Products should be located in the sideways direction (Length: a<b) to the mechanical stress. a b Poor example Good example !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 140 NFp Chip EMIFILr Soldering and Mounting 2. Solder Paste Printing and Adhesive Application Chip Ferrite Bead When flow soldering the EMI suppression filter, apply the adhesive in accordance with the following conditions. If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering process. When reflow soldering the chip EMI suppression filter, the printing must be conducted in accordance with the following cream solder printing conditions. If too much solder is applied, the chip will be prone to damage by mechanical and thermal stress from the PCB and may crack. Standard land dimensions should be used for resist and copper foil patterns. (in mm) Adhesive Application oGuideline of solder paste thickness: 100-150m: NFM18/21/3D/31P, NFR, NFL 150-200m: NFM55P 100-200m: NFM41 0.4 0.6 1.2 0.4 1.0 2.2 1.2 NFL18SP NFM18C/18PC NFL18ST 0.4 NFM3D/31P/41 Series Apply 0.1mg for NFM41C/41 and 0.06mg for NFM3D/NFM31P of bonding agent at each chip. Do not cover electrodes. 0.4 1.0 2.0 Soldering and Mounting 0.6 1.2 0.4 0.8 1.2 2.0 NFM3DC/3DP Chip Common Mode Choke Coil 0.6 1.4 2.6 1.2 0.8 2.0 0.6 0.6 NFM31P 1.0 2.5 3.9 2.6 0.05 Coating position of bonding agent NFM21C/21PC NFR21G/NFL21S 0.1 NFM18PS Bonding agent 0.8 1.9 NFM NFR NFL Solder Paste Printing Chip EMIFILr Series 1.0 2.5 4.4 NFM41C/41P 3.5 5.0 6.5 Block Type EMIFILr 1.5 3.5 5.5 2.6 1.0 0.6 NFM55P 1.5 4.7 6.7 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 141 NFp Chip EMIFILr Soldering and Mounting (in mm) NFA Solder Paste Printing Adhesive Application oGuideline of solder paste thickness: 100-200m: NFA31G/31C 100-150m: NFA18S/21S NFA31G/31C 0.6 2.6 2.2 1.0 0.4 Chip Ferrite Bead Series 0.8 Pitch 0.3 NFA21S 1.5 0.5 0.25 0.25 0.25 0.75 1.75 Chip EMIFILr 0.5 NFA18S 0.175 1.375 0.225 0.175 0.4 1.3 2.0 0.6 2.2 4.2 Bonding agent oGuideline of solder paste thickness: 150-200m Coating positon of bonding agent Apply 1.0mg of bonding agent at each chip. 1.2 3.2 1.6 2.6 Block Type EMIFILr 0.6 NFE61P NFW31S Series Apply 0.2mg of bonding agent at each chip. 2.6 oGuideline of solder paste thickness: 150-200m 0.6 NFW31S NFE31P 1.0 Chip Common Mode Choke Coil Soldering and Mounting 0.05 1.5 4.8 8.8 Bonding agent 1.5 4.8 9.0 Bonding agent !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 142 NFp Chip EMIFILr Soldering and Mounting 3. Standard Soldering Conditions Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based solder will deteriorate performance of products. If using NFM series with Sn-Zn based solder, please contact Murata in advance. Chip Ferrite Bead Flux: o Use Rosin-based flux. In case of using RA type solder, products should be cleaned completely with no residual flux. o Do not use strong acidic flux (with chlorine content exceeding 0.20wt%) o Do not use water-soluble flux. (1) Soldering Methods Use flow and reflow soldering methods only. Use standard soldering conditions when soldering chip EMI suppression filters. In cases where several different parts are soldered, each having different soldering conditions, use those conditions requiring the least heat and minimum time. For additional mounting methods, please contact Murata. Chip EMIFILr (2) Soldering Profile T3 T2 t2 Heating T1 Standard Profile Time (s) Standard Profile Pre-heating Heating Temp. (T1) Time. (t1) Temp. (T2) Time. (t2) NFM3DC/3DP/31PC NFM41C/41P NFE61P 150C 60s min. 250C 4 to 6s NFW31S 150C 60s min. 250C 4 to 6s Soldering and Mounting Pre-heating t1 Series Limit Profile Limit Profile Cycle of Flow Heating Cycle of Flow Temp. (T3) Time. (t2) 2 times max. 2653C 5s max. 2 times max. 2 times max. 2653C 5s max. 1 time Chip Common Mode Choke Coil Temperature (C) oFlow Soldering Profile (Sn-3.0Ag-0.5Cu Solder) oReflow Soldering Profile (Sn-3.0Ag-0.5Cu Solder) Temperature (C) T4 T2 T1 T3 180 150 Limit Profile Pre-heating t1 Standard Profile 90s30s Time (s) Standard Profile Series Limit Profile Peak Cycle Temperature of Reflow (T2) Time. (t1) Heating Temp. (T1) Block Type EMIFILr t2 Heating Temp. (T3) Time. (t2) Peak Cycle Temperature of Reflow (T4) NFA, NFE NFL, NFM (Except NFM55P) NFR 220C min. 30 to 60s 2453C 2 times max. 230C min. 60s max. 260C/10s 2 times max. NFW31S, NFM55P 220C min. 30 to 60s 2453C 2 times max. 230C min. 60s max. 260C/10s 1 time !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 143 Chip Ferrite Bead NFp Chip EMIFILr (3) Reworking with Solder Iron The following conditions must be strictly followed when using a soldering iron. Pre-heating: 150C 60s min.*1 *1 NFM55P: 100C/60s+200C/60s Soldering iron power output / Tip diameter: 30W max. / o3mm max. Temperature of soldering iron tip / Soldering time / Times: 350C max. / 3-4s / 2 times*2 2 * NFE31PT152Z1E9: 280C max. / 10s max. / 2 times Soldering and Mounting Do not allow the tip of the soldering iron to directly contact the chip. For additional methods of reworking with a soldering iron, please contact Murata engineering. Following conditions should be observed when cleaning chip EMI filter. (1) Cleaning Temperature: 60C max. (40C max. for alcohol type cleaner) (2) Ultrasonic Output: 20W/liter max. Duration: 5 minutes max. Frequency: 28 to 40kHz (3) Cleaning Agent The following list of cleaning agents have been tested on the individual components. Evaluation of final assembly should be completed prior to production. (a) Alcohol cleaning agent Isopropyl alcohol (IPA) (b) Aqueous cleaning agent Pine Alpha ST-100S (4) Ensure that flux residue is completely removed. Component should be thoroughly dried after aqueous agent has been removed with deionized water. Block Type EMIFILr Chip Common Mode Choke Coil Soldering and Mounting Chip EMIFILr 4. Cleaning !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 144 NFp Packaging Chip EMIFILr 1.750.1 Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape <Paper> Chip Ferrite Bead <Embossed> c d a 3.50.05 8.0 2.00.05 4.00.1 4.00.1 o1.5 +0.1 -0 c Direction of Feed b c: Depth of Cavity (Embossed Tape) NFA18S, NFA21S_48 only. NFA18S: o0.80.1, NFA21S_48: o1.0 +0.3 -0 c: Total Thickness of Tape (Paper Tape) Dimension of the cavity of embossed tape is measured at the bottom side. Minimum Qty. (pcs.) NFM18C/ NFM18PC (Except 105R/225B1A)/ 1.85 NFM18PS c 1.05 0.9 max. NFM18PC105R/225B1A 1.1 max. NFL18SP 0.9 max. d o330mm Reel Paper Tape Embossed Tape Paper Tape Embossed Tape - Bulk 4000 - - - 500 - 4000 - - - 500 - 4000 - - - 1000 1.85 1.05 NFL21SP 2.3 1.55 1.1 max. NFM21 2.3 1.55 1.1 max. - 4000 - - - 500 NFM3DC/3DP 3.4 1.4 0.85 0.2 - 4000 - - 500 NFM31P 3.5 1.9 1.5 0.25 - 3000 - - 500 NFA18S 1.8 1.0 0.7 0.25 - 4000 - - 1000 NFA21S_45 2.30 1.55 0.7 0.25 - 4000 - - 1000 NFA21S_48 2.25 1.45 1.05 0.25 - 4000 - - 1000 NFA31G/31C 3.5 2.0 1.1 max. - 4000 - - - 100 NFE31P 3.6 1.8 1.85 0.2 - 2000 - 8000 500 NFR21G 2.3 1.55 0.7 0.25 - 4000 - - 500 NFW31S 3.6 1.9 2.0 0.2 - 2000 - 7500 - NFL18ST 1.1 max. Chip EMIFILr b Packaging a o180mm Reel Chip Common Mode Choke Coil Cavity Size Part Number (in mm) +0.1 a Part Number Cavity Size Minimum Qty. (pcs.) a b c o180mm Reel o330mm Reel NFM41 4.8 1.8 1.1 4000 - Bulk 500 NFE61 7.2 1.9 1.75 2500 8000 500 Direction of Feed Block Type EMIFILr b c 0.3 5.50.05 o1.5 -0 12.0 2.00.05 4.00.1 4.00.1 1.750.1 Minimum Quantity and Dimensions of 12mm Width Embossed Tape b o1.70.1 c 0.3 Part Number 12.0 o1.5 +0.1 -0 5.50.05 a 2.00.05 8.00.1 4.00.1 1.750.1 c: Depth of Cavity NFM55P Cavity Size Minimum Qty. (pcs.) a b c 6.0 5.3 2.5 o180mm Reel o330mm Reel 500 - Bulk 100 Direction of Feed c: Depth of Cavity Dimension of the cavity is measured at the bottom side. (in mm) "Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity". !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 145 Chip EMIFILr Design Kits Chip Ferrite Bead NFp Chip EMIFILr oEKEMNFMCB (Chip EMIFILr Capacitor Type for Signal Lines) No. Part Number Quantity (pcs.) Capacitance Rated Voltage (Vdc) Rated Current (mA) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 NFM18CC220U1C3 NFM18CC470U1C3 NFM18CC101R1C3 NFM18CC221R1C3 NFM18CC471R1C3 NFM18CC102R1C3 NFM18CC222R1C3 NFM18CC223R1C3 NFM21CC220U1H3 NFM21CC470U1H3 NFM21CC101U1H3 NFM21CC221R1H3 NFM21CC471R1H3 NFM21CC102R1H3 NFM21CC222R1H3 NFM21CC223R1H3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 22pF20% 47pF20% 47pF20% 100pF20% 220pF20% 470pF20% 1000pF20% 2200pF20% 22000pF20% 22pF20% 100pF20% 220pF20% 470pF20% 1000pF20% 2200pF20% 22000pF20% 16 16 16 16 16 16 16 16 50 50 50 50 50 50 50 50 400 400 500 500 500 600 700 1000 700 700 700 700 1000 1000 1000 2000 Chip Common Mode Choke Coil Design Kits oEKEMFA31E (Chip EMIFILr Capacitor Array Type/ RC Combined Array Type) No. Part Number Quantity (pcs.) Capacitance Rated Voltage (Vdc) Rated Current (mA) 1 2 3 4 5 6 7 8 NFA31CC220S1E4 NFA31CC470S1E4 NFA31CC101S1E4 NFA31CC221S1E4 NFA31CC471R1E4 NFA31CC102R1E4 NFA31CC222R1E4 NFA31CC223R1C4 10 10 10 10 10 10 10 10 22pF20% 47pF20% 100pF20% 220pF20% 470pF20% 1000pF20% 2200pF20% 22000pF20% 25 25 25 25 25 25 25 16 200 200 200 200 200 200 200 200 Block Type EMIFILr oEKEMFL18F (Chip EMIFILr LC Combined Type) No. Part Number Quantity (pcs.) Cut-off Frequency Rated Voltage (Vdc) Rated Current (mA) DC Resistance () max. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 NFL18ST506H1A3 NFL18ST706H1A3 NFL18ST107H1A3 NFL18ST207X1C3 NFL18ST307X1C3 NFL18ST507X1C3 NFL18SP157X1A3 NFL18SP207X1A3 NFL18SP307X1A3 NFL18SP507X1A3 NFL21SP106X1C3 NFL21SP206X1C7 NFL21SP506X1C3 NFL21SP706X1C3 NFL21SP107X1C3 NFL21SP157X1C3 NFL21SP207X1C3 NFL21SP307X1C3 NFL21SP407X1C3 NFL21SP507X1C3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 50MHz 70MHz 100MHz 200MHz 300MHz 500MHz 150MHz 200MHz 300MHz 500MHz 10MHz 20MHz 50MHz 70MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz 10 10 10 16 16 16 10 10 10 10 16 16 16 16 16 16 16 16 16 16 75 75 75 150 200 200 100 100 100 100 100 100 150 150 200 200 250 300 300 300 3.5 1.8 1.5 3.0 3.0 3.0 2.0 8.5 8.5 3.5 3.0 2.0 2.0 1.5 1.2 1.2 1.2 Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 146 NFp Chip EMIFILr Design Kits Continued from the preceding page. Part Number 21 22 23 24 25 26 27 28 29 NFW31SP106X1E4 NFW31SP206X1E4 NFW31SP506X1E4 NFW31SP107X1E4 NFW31SP157X1E4 NFW31SP207X1E4 NFW31SP307X1E4 NFW31SP407X1E4 NFW31SP507X1E4 Quantity Cut-off (pcs.) Frequency 10 10 10 10 10 10 10 10 10 10MHz 20MHz 50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz Attenuation (dB min.) 10MHz 20MHz 50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz 30 6dB max. 25 25 25 5 30 6dB max. 25 25 5 6dB max. 30 30 10 6dB max. 20 5 6dB max. 30 20 10 6dB max. 10 6dB max. 5 6dB max. 6dB max. - 1GHz 30 30 30 30 30 30 15 10 10 Rated Rated Current Voltage 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA 200mA Chip Ferrite Bead No. 25V 25V 25V 25V 25V 25V 25V 25V 25V Quantity (pcs.) Cut-off Frequency Rated Voltage (Vdc) Rated Current (mA) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 NFA18SL506X1A45 NFA18SL137V1A45 NFA18SL187V1A45 NFA18SL207V1A45 NFA18SL227V1A45 NFA18SL307V1A45 NFA18SL357V1A45 NFA18SL407V1A45 NFA18SL487V1A45 NFA18SD187X1A45 NFA18SD207X1A45 NFA21SL506X1A48 NFA21SL806X1A48 NFA21SL207X1A45 NFA21SL207X1A48 NFA21SL307X1A45 NFA21SL307X1A48 NFA21SL287V1A45 NFA21SL287V1A48 NFA21SL317V1A45 NFA21SL317V1A48 NFA21SL337V1A45 NFA21SL337V1A48 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 50MHz 130MHz 180MHz 200MHz 220MHz 300MHz 350MHz 400MHz 480MHz 180MHz 200MHz 200MHz 80MHz 200MHz 200MHz 300MHz 300MHz 280MHz 280MHz 310MHz 310MHz 330MHz 330MHz 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 25 50 50 50 25 100 35 100 100 25 25 25 20 100 100 100 100 100 100 100 100 100 100 Design Kits Part Number Chip Common Mode Choke Coil No. Chip EMIFILr oEKEMFA20H (Chip EMIFILr LC Combined Array Type) No. Part Number Quantity (pcs.) Capacitance Rated Voltage (Vdc) Rated Current (A) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 NFM18PC104R1C3 NFM18PC224R0J3 NFM18PC474R0J3 NFM18PC105R0J3 NFM18PC225B0J3 NFM18PC225B1A3 NFM18PS474R0J3 NFM18PS105R0J3 NFM21PC104R1E3 NFM21PC224R1C3 NFM21PC474R1C3 NFM21PC105B1A3 NFM21PC105B1C3 NFM21PC225B0J3 NFM21PC475B1A3 NFM31PC276B0J3 NFM41PC204F1H3 NFM41PC155B1E3 NFE31PT152Z1E9 NFE31PT222Z1E9 NFE61PT102E1H9 NFE61PT472C1H9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.1F20% 0.22F20% 0.47F20% 1F20% 2.2F20% 2.2F20% 0.47F20% 1F20% 0.1F20% 0.22F20% 0.47F20% 1F20% 1F20% 2.2F20% 4.7F20% 27F20% 0.2F +80/-20% 1.5F20% 1500pF +50/-20% 2200pF50% 1000pF +80/-20% 4700pF +80/-20% 16 6.3 6.3 6.3 6.3 10 6.3 6.3 25 16 16 10 16 6.3 10 6.3 50 25 25 25 50 50 2 2 2 4 2 4 2 2 2 2 2 4 4 4 6 6 2 6 6 6 2 2 Block Type EMIFILr oEKEMNFMPH (Chip EMIFILr for Large Current) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. C31E.pdf Mar.28,2011 147