Solder cups fixed in an outward orientation (otherwise contacts will rotate)
Pre-tinned contact terminations (except solder cups, wire wraps and flex contacts)
OPTIONSOPTIONS
OPTIONSOPTIONS
socket contacts are receptacle image.
The contact type determines image of connector. Pin, right angle contacts are always plug image. Straight pin contacts or
HARDWAREHARDWARE
HARDWAREHARDWARE
CONTACTSCONTACTS
CONTACTSCONTACTS
SERIESSERIES
SERIESSERIES
SIZESIZE
SIZESIZE
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
AirBorn 4321 AirBorn Drive Addison, TX 75001-0519
RECEPTACLERECEPTACLE
RECEPTACLERECEPTACLE
Includes nuts bonded into hex recess in mounting holes. Plug connector only.
Termination face sealed against conformal coating
Guide set, long
Guide set, polarized
Guide set
-G69
-D01
-548
-B82
SYL
SY-#
SY
TYPE CONTACTS/TERMINATIONS:
Pin, right angle, dip solder, .140" x .025" dia
Pin, right angle, dip solder, .109" x .025" dia
Number of contacts
Plug, right angle, with mounting ears
122
PR7
PR9
WGA
PLUGPLUG
PLUGPLUG
Socket, straight, wire wrap , .625"
R
R
Socket, straight, wire wrap , .375"
R
SAW40
SAW24
AirBorn
TYPE CONTACTS/TERMINATIONS:
Socket, straight, dip solder, .172" x .027" dia
Socket, straight, dip solder, .140" x .027" dia
Socket, straight, dip solder, .109" x .027" dia
Socket, straight, solder cup (.035" I.D.)
Socket, straight, flex circuit, .050"
Socket, straight, flex circuit, .093"
Socket, straight, flex circuit, .140"
Receptacle, straight, with mounting ears
122
SAC
SAD7
SAD11
SAD9
SAF3
SAF6
SAF9
WGA
PR11 Pin, right angle, dip solder, .172" x .025" dia
SOR11
SOR9
SOR7 Socket, right angle, dip solder, .109" x .025" dia
Socket, right angle, dip solder, .140" x .025" dia
Socket, right angle, dip solder, .172" x .025" dia
J
JL Fixed jackset, long
Fixed jackset
SYL
SY-#
SY
Guide set, long
Guide set, polarized
Guide set
JT Turning jackset, .435"
JTA Turning jackset, .135"
JTB
JTC Hex turning jackset, .135"
Turning jackset, .435"
JTL Turning jackset, long, .635"
Option Codes: Add to the end of the part number. Example: WGA122PR9SY548. Call factory for additional codes.
Remove mounting ears. (.250" each end)-342
SAP Socket, straight, pin termination .150", connector saver
WGA Receptacle, right angle, with mounting ears
Number of contacts
PRW32 Pin, right angle, wire wrap , .500"
R
Combine -B82 and -D01 special codes.
-413
-D54 Straight pin contacts in right angle plug molding with solder cup terminals extending .100" beyond molding.
JFixed jackset
JTB
JTA
JT
JTL
JTC Hex turning jackset, .160"
Turning jackset, .160"
Turning jackset, .460"
Turning jackset, long, .660"
Turning jackset, .460"
