147 MHz SAW Filter 8 MHz Bandwidth Part Number: SF0147BA02468S DESCRIPTION * * * 147 MHz SAW bandpass filter with 8 MHz bandwidth. 9 x 7 mm ceramic LCC. RoHS compliant. TYPICAL PERFORMANCE Horizontal: Vertical from Top: Frequency : Relative Magnitude : Relative Magnitude : S11 (97-197 MHz) 20 10 1 MHz/div dB/div dB/div S22 (97-197 MHz) IDT * SAW Products * 324 Clark Street, Worcester, MA 01606, USA * Ph 1-508-852-5400 * Fax 1-508-852-8456 www.idt.com DSSF0147BA02468S Rev 21-May-2007 ECN 35500 Page 1 of 3 147 MHz SAW Filter 8 MHz Bandwidth Part Number: SF0147BA02468S SPECIFICATION Parameter Center Frequency, FC 1 Insertion Loss Lower 3 dB Band Edge 2 Upper 3 dB Band Edge 2 Amplitude Ripple (143 to 151 MHz) Absolute Attenuation (47 to 108.2 MHz) 2 Absolute Attenuation (185.8 to 247 MHz) 2 Absolute Attenuation (247 to 367.5 MHz) 2 Input and Output Return Loss Temperature Coefficient Source/Load Impedance Ambient Temperature Notes: Min 151 50 50 40 - Typ 147 3.2 142 152 2.5 55 55 45 6 -80 50 25 Max 5 143 3.0 - Units MHz dB MHz MHz dB p-p dB dB dB dB ppm/C C 1. Defined as the average of the lower and upper 3 dB frequencies at room ambient. 2. All dB levels are defined relative to the insertion loss. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level Min Max -40 0 - 85 50 15 Units C C dBm MATCHING CIRCUIT 3 8 Input 50 Single-ended Output 50 Single-ended GND All others GND Notes: 1. Matching components are not required. IDT * SAW Products * 324 Clark Street, Worcester, MA 01606, USA * Ph 1-508-852-5400 * Fax 1-508-852-8456 www.idt.com DSSF0147BA02468S Rev 21-May-2007 ECN 35500 Page 2 of 3 147 MHz SAW Filter 8 MHz Bandwidth Part Number: SF0147BA02468S PACKAGE OUTLINE SUGGESTED FOOTPRINT Units: mm Tolerances are 0.15 mm except where indicated. Pad Configuration: Input: 3 Output: 8 Ground: all other pads Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 m min, over a 1.3-8.9 m Ni plating ISO 9001 Registered All specifications are believed to be accurate and reliable. However, MNC reserves the right to make changes without notice. (c) 2007 All rights reserved. IDT * SAW Products * 324 Clark Street, Worcester, MA 01606, USA * Ph 1-508-852-5400 * Fax 1-508-852-8456 www.idt.com DSSF0147BA02468S Rev 21-May-2007 ECN 35500 Page 3 of 3