HMC363S8G / 363S3GE v05.0412 Frequency Dividers & Detectors - SMT SMT GaAs HBT MMIC DIVIDE-BY-8, DC - 12 GHz Typical Applications Features Prescaler for DC to X Band PLL Applications: Ultra Low SSB Phase Noise: -153 dBc/Hz * Satellite Communication Systems Wide Bandwidth * Fiber Optic Output Power: -6 dBm * Point-to-Point and Point-to-Multi-Point Radios Single DC Supply: +5V * VSAT S8G SMT Package Functional Diagram General Description The HMC363S8G & HMC363S8GE are low noise Divide-by-8 Static Dividers with InGaP GaAs HBT technology in 8 lead surface mount plastic packages. This device operates from DC (with a square wave input) to 12 GHz input frequency with a single +5V DC supply. The low additive SSB phase noise of -153 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. Electrical Specifications, TA = +25 C, 50 Ohm System, Vcc= 5V Parameter Conditions Min. Typ. 12 13 0.2 0.5 GHz Fin = 1 to 7 GHz -15 >-20 +10 dBm Fin = 7 to 11 GHz -10 >-15 +2 dBm Fin = 11 to 12 GHz -5 >-8 0 dBm Fin = 12 GHz -9 -6 Maximum Input Frequency Minimum Input Frequency Input Power Range Output Power Reverse Leakage SSB Phase Noise (100 kHz offset) Output Transition Time Sine Wave Input. [1] Max. Units GHz dBm Both RF Outputs Terminated 65 dB Pin = 0 dBm, Fin = 6 GHz -153 dBc/Hz Pin = 0 dBm, Fout = 882 MHz 100 ps 70 mA Supply Current (Icc) 1. Divider will operate down to DC for square-wave input signal. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC363S8G / 363S3GE v05.0412 SMT GaAs HBT MMIC DIVIDE-BY-8, DC - 12 GHz 20 10 10 0 Recommended Operating Window -10 -20 -30 0 Min Pin +25 C Max Pin +25 C Min Pin +85 C Max Pin +85 C Min Pin -40 C Max Pin -40 C -10 -20 -30 0 3 6 9 12 15 0 3 6 INPUT FREQUENCY (GHz) 0 15 0 -20 +25 C +85 C -40 C -2 SSB PHASE NOISE (dBc/Hz) OUTPUT POWER (dBm) 12 SSB Phase Noise Performance, Pin= 0 dBm, T= 25 C Output Power vs. Temperature -4 -6 -8 -10 0 3 6 9 12 -40 -60 -80 -100 -120 -140 -160 2 10 15 3 10 4 10 5 10 6 10 7 10 OFFSET FREQUENCY (Hz) INPUT FREQUENCY (GHz) Output Harmonic Content, Pin= 0 dBm, T= 25 C Reverse Leakage, Pin= 0 dBm, T= 25 C 0 0 Both Output Ports Terminated One Output Port Terminated POWER LEVEL (dBm) -10 OUTPUT LEVEL (dBm) 9 INPUT FREQUENCY (GHz) -20 -30 -40 Pfeedthru 2nd Harmonic 3rd Harmonic -50 -60 Frequency Dividers & Detectors - SMT Input Sensitivity Window vs. Temperature 20 INPUT POWER (dBm) INPUT POWER (dBm) Input Sensitivity Window, T= 25 C -20 -40 -60 -80 0 3 6 9 INPUT FREQUENCY (GHz) 12 15 0 3 6 9 12 15 INPUT FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC363S8G / 363S3GE v05.0412 SMT GaAs HBT MMIC DIVIDE-BY-8, DC - 12 GHz Output Voltage Waveform, Pin= 0 dBm, Fout= 882 MHz, T= 25 C 3 200 AMPLITUDE (mV) Frequency Dividers & Detectors - SMT 300 100 0 -100 -200 -300 22.7 23.1 23.5 23.9 24.3 24.7 TIME (nS) Absolute Maximum Ratings Typical Supply Current vs. Vcc RF Input (Vcc = +5V) +13 dBm Vcc (V) Icc (mA) Vcc +5.5V 4.75 64 Channel Temperature 135 C 5.0 70 Continuous Pdiss (T=85C) (derate 13.7 mW/C above 85C) 680 mW 5.25 75 Thermal Resistance (channel to ground paddle) 73.2 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C Note: Divider will operate over full voltage range shown above ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC363S8G / 363S3GE v05.0412 SMT GaAs HBT MMIC DIVIDE-BY-8, DC - 12 GHz NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC363S8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC363S8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] HMC363 XXXX HMC363 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Frequency Dividers & Detectors - SMT Outline Drawing 4 HMC363S8G / 363S3GE v05.0412 SMT GaAs HBT MMIC DIVIDE-BY-8, DC - 12 GHz Frequency Dividers & Detectors - SMT Pin Description 5 Pin Number Function Description 1 NOUT Divided output 180 out of phase with pin 3. 2, 6 N/C No connection. These pins must not be grounded. 3 OUT Divided Output. 4 VCC Supply voltage 5V 0.25V. 5 IN RF Input must be DC blocked. 7 NIN RF Input 180 out of phase with pin 5 for differential operation. A/C ground for single ended operation 8, paddle GND Backside of package has exposed metal ground slug which must be connected to ground. Interface Schematic Application Circuit Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC363S8G / 363S3GE v05.0412 SMT GaAs HBT MMIC DIVIDE-BY-8, DC - 12 GHz List of Materials for Evaluation PCB 104631 Item Description J1 - J3 PCB Mount SMA RF Connector C1 - C4 100 pF Capacitor, 0402 Pkg. C5 1000 pF Capacitor, 0603 Pkg. C6 10 F Tantalum Capacitor U1 HMC363S8G / HMC363S8GE Divide-by-8 PCB [2] 104627 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. This evaluation board is designed for single ended input testing. J2 and J3 provide differential output signals. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Frequency Dividers & Detectors - SMT Evaluation PCB 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC363S8GE HMC363S8G HMC363S8GETR 104631-HMC363S8G