HX-SCE-1K-3.2-50-S1-4 - TE CONNECTIVITY

Tyco Electronics Identification

HX-SCE - High Performance Low Fire Hazard Identification Solution

Features and Benefits

■

Low Fire Hazard Properties,

Low Smoke, Low Toxicity,

Low Flammability:- Meets

Industry Standard BS 6853

(1999) Vehicle Category 1a

■

Superb Print Quality to give

Crisp Clear Identification

Marker Sleeve

■

Excellent Print Permanence

when tested in Demanding

Industry Related Fluids

■

Choice of Printer Options

■

Sleeve Diameters from

2.4mm to 38.1mm

■Sleeves are Printable on

Both Sides for ease of

Identification or Addition

of Additional Information

to the Marker Sleeve

■

Shrink Ratio of 2:1 -

Recovers to Half of the

Original Diameter

Industries featured in:

Marine Rail Industrial

Thin wall, zero-halogen, low

smoke, low toxicity, radiation

cross-linked, UV stabilised

polyolefin heat-shrinkable

tubing, assembled as cut

sleeves organised in a

ladder format.

Identification of wires and

cables by computer-based

printing onto sleeves. Ideal

for applications where

limited fire hazard charac-

teristics are critical. The

zero halogen material

coupled with low smoke and

low toxic fume emissions

make this product ideal for

use in enclosed spaces

such as mass transit, marine

and industrial installations.

This product is not

recommended where strain

relief properties are

required.

Literature No. 1773110

Revised 06-05

Dimensions are shown for

reference purposes only.

Conversion Rate:

25.4mm = 1 inch

Dimensions are in inches and

millimetres unless otherwise

specified. Values in brackets

are metric equivalents.

Specifications subject to

change.

www.tycoelectronics.com

Tyco Electronics Identification

HX-SCE - High Performance Low Fire Hazard Identification Solution

Literature No. 1773110

Revised 06-05

Dimensions are shown for

reference purposes only.

Conversion Rate:

25.4mm = 1 inch

Dimensions are in inches and

millimetres unless otherwise

specified. Values in brackets

are metric equivalents.

Specifications subject to

change.

www.tycoelectronics.com

Ordering Information

Available Sizes

and Formats

Ordering D (min) d (max) Recommended

Description as Supplied after Recovery Use Range

mm inches mm inches mm inches

HX-SCE-1K-2.4-50-<colour> 2.40 0.094 1.19 0.047 1.27-1.90 0.050-0.075

HX-SCE-1K-3.2-50-<colour> 3.20 0.126 1.58 0.060 1.75-2.66 0.069-0.105

HX-SCE-1K-4.8-50-<colour> 4.80 0.189 2.36 0.090 2.54-4.06 0.100-0.160

HX-SCE-1K-6.4-50-<colour> 6.40 0.250 3.18 0.125 3.81-5.46 0.150-0.215

HX-SCE-1K-9.5-50-<colour> 9.50 0.375 4.75 0.187 5.59-8.12 0.220-0.320

HX-SCE-1K-12.7-50-<colour> 12.70 0.500 6.35 0.250 6.99-10.79 0.275-0.425

HX-SCE-1K-19.0-50-<colour> 19.00 0.730 9.53 0.375 10.16-16.25 0.400-0.640

HX-SCE-1K-25.4-50-<colour> 25.40 1.000 12.7 0.500 14.29-21.59 0.563-0.850

HX-SCE-1K-38.1-50-<colour> 38.1 1.500 19.05 0.750 20.95-33.02 0.825-1.300

1.970 Min

(50.0)

Options

Prescoring Perforated score to produce multiple marker sleeves from each HX-SCE sleeve

Number of prescores: 1 prescore 2 prescores 3 prescores

Code: S1 S2 S3

Package sizes Standard: 1K - 1000 piece packages available for all HX-SCE sizes

Non Standard: 250 piece packages available for all HX-SCE sizes

2.5K - 2500 pieces available for 4.8 and 6.4 HX-SCE sizes

5K - 5000 pieces available for 2.4 and 3.2 HX-SCE sizes

Colours Standard: Yellow White

Non Standard: Red Orange Green Blue

23 5 6

Ordering information: Reference pack size, product diameter, sleeve length, prescores and colour

then reference part numbering system

Tyco Electronics Identification

HX-SCE - High Performance Low Fire Hazard Identification Solution

Literature No. 1773110

Revised 06-05

Dimensions are shown for

reference purposes only.

Conversion Rate:

25.4mm = 1 inch

Dimensions are in inches and

millimetres unless otherwise

specified. Values in brackets

are metric equivalents.

Specifications subject to

change.

www.tycoelectronics.com

Technical Information

Print Method/Ribbon:

T312M-PRINTER with 1966-RIBBON or

T212M-PRINTER with T200-1966-RIBBON

Service Temperature: -30°C to +105°C (-22°F to +221°F).

Minimum Shrink Temperature: 135°C (275°F).

Colours: White or yellow.

Other colours available on request.

Flammability: Self-extinguishing -

(ASTM D2671 Procedure B).

Oxygen Index (BS6853: Pass 34% Min.) -

(BS EN ISO 4589-2 [1999]).

(AFNOR NF F 16-101 Class I2).

Dripping Classification ST2 - (DIN 5510-2)

Smoke: A0=0.017 Max. - (BS 6853 [1999]

Annex D [D.8.3]) Small scale test

Smoke Index Determination (IF)

Maximum 20, Smoke Class F1 -

(AFNOR NF F 16-101-1988 Smoke Index)

Toxicity: R < 1 - (BS 6853 [1999] Annex B –

AFNOR NF X 70-100 Determination of

weighted summation of toxic fume, mass

based method)

LUL Toxic Fume: No Halogens, No P, S

or N sources above trace level -

(LUL E1042: A6 [2002]).

(London Underground Standard

2-01001-002, section 5.2.3. Chemical

composition / toxicity)

Toxicity (continued): Toxicity Index = 0.34 -

(CEI 20-37-7 09-1997 Determination of

toxicity index of gases from combustion

of organic material)

Dielectric Strength: 15kV/mm minimum.

Water Absorbsion: 1% maximum after 24 hours at 23°C

(73°F).

Copper Mirror Corrosion: 8% maximum after 16 hours at 150°C

(302°F).

Longitudinal Change: +5% to -10%.

Tensile Strength: 7MPa minimum.

Ultimate Elongation: 80% minimum.

Secant Modulas: 200MPa maximum at 2% elongation.

UV Resistance: Tensile strength > 90% & Ultimate

(base polymer) elongation > 40% of original value after

1000 hours (ASTM G53: UVA [100%

dry cycle]; UVB [8 hours dry/4 hours

wet cycle]).

Print Permanence: ADHERENCE - Meets the requirements

of SAE AS81531 4.6.2 (50 rubs).

FLUID RESISTANCE - Meets the

requirements of MIL-STD-202F method

215J.

Industry Standards

Standard Title Application

BS6853 Code of practice for fire precautions in the design Interior minor use materials of mass 100g to 500g.

and construction of passenger carrying trains Vehicle category la

1London Underground Limited Fire Safety Performance of Materials Limited, Dispersed usage (abbreviation RS/EQ/I)

Standard 2-01001-002

NF F 16-101 Railway Rolling Stock Fire behavior choice of materials Rolling Stock Classification A1

DIN 5510-2 Preventive fire protection in railway vehicles - Part 2: Fire Dripping Classification ST2

behavior and fire side effects of materials and parts;

Classification, Requirements and test methods

2EN50343 Railway Applications - Rolling Stock - Tests on marking when using heat-shrinkable sleeves

Rules for installation of cabling

1This replaces LUL Engineering Standard E 1042

2Not including resistance to liquid fuel - not recommended for use in areas where the sleeves may be subject to extended contact from diesel fuel -

Tyco Electronics D-SCE product range is designed for use in these areas

Tyco Electronics Identification

HX-SCE - High Performance Low Fire Hazard Identification Solution

Fluid Resistance

Threat Test Effect

Xylene/butylacetate/cyclohexanone mix (Paint stripper) 10 wipes dry tissue Print Contrast >/8

Locomotive diesel 10 wipes dry tissue Print Contrast >/8

Tunnel dust/white spirits LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

Water LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

Tunnel Dust and Oil (50% / 50%) LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

Tunnel Dust and Water (50% / 50%) LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

White Spirits LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

Diesel LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

Grease LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

Glycol rail de-icer (50% glycol / 50% water) LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

Cleaning solvent LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

Surface Cleaner (PGP500) LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

Multi-Purpose Graffiti remover gel LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

CGR gel (Chewing gum remover) LUL C3349 (72 hours, 20 strokes dry tissue) Print Contrast >/8

IRM 902 oil EN50343 (70 hours at 50°C(122°F) 10 wipes) Print Contrast >/8

Hydrochloric acid 5% solution EN50343 (1 minute at 23°C(73°F) 10 wipes) Print Contrast >/8

Sodium Hydroxide 5% solution EN50343 (1 minute at 23°C(73°F) 10 wipes) Print Contrast >/8

Heat aging EN50343 (240 hours at 120°C (248°F) 10 wipes) Print Contrast >/8

Wash cycle test 25 cycles at 75°C (167°F) 25 wipes Print Contrast >/8

Aircraft fuel (ISO 1817 Liquid B) 24 hours at 40°C (104°F) then 25 strokes dry tissue; Print Contrast >/8;