VOLTAGE RANGE 50 to 1000 Volts CURRENT 35 Amperes
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
MB3505
THRU
MB3510
MAXIMUM RATINGS
(@ TA=25
OC unless otherwise noted)
ELECTRICAL CHARACTERISTICS
(@TA=25
OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at T
C
= 55
o
C
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
SYMBOL
V
RRM
V
DC
I
O
I
FSM
R
qJA
T
J
, T
STG
V
RMS
MB3505 MB351 MB352 MB354 MB356 MB358 MB3510
MB3505 MB351 MB352 MB354 MB356 MB358 MB3510
UNITS
50 200 600
Volts
Volts
Volts
Amps
35
50
100
70
100
700
1000
140
200
420
600
1000
560
800
800
35.0
400
16
-55 to + 150
Amps
OC/W
R
qJC
1.4
0
C
400
280
400
NOTES : 1. Suffix "W" for wire type.
2. Typical Thermal Resistance: Heat-sink case mounted.
2007-5
at Rated DC Blocking Voltage
@T
A
= 25
o
C
@T
A
= 100
o
C
CHARACTERISTICS
V
F
SYMBOL
I
R
UNITS
1.1
5.0
500
uAmps
Maximum DC Reverse Current
Maximum Instantaneous Forward Voltage at 17.5A DC Volts
3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
FEATURES
* Superior thermal desing
* 400 amperes surge rating
* 1/4" universal faston terminal
* Hole thru for #8 screw
* Epoxy
* UL listed the recongnized component director, file #94233
: Device has UL flammability classification 94V-0
MECHANICA
DISCONTINUED-
L DATA
"This series is replaced by the MP35 series that meets to the same
fit and function parameters.
The MP35 series is preferred for PCB assembly.＂
MB-35
MB-35W
Discontinued
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
RATING AND CHARACTERISTICS CURVES ( MB3505 THRU MB3510 )
MB-35WMB-35
.480 (12.2)
.425 (10.8)
1.181 (30.0)
1.102 (28.0)
.673 (17.1)
.633 (16.1)
.673 (17.1)
.633 (16.1)
.033x.250
(0.8x6.4)
1.181 (30.0)
1.102 (28.0)
.732 (18.6)
.582 (14.8)
.543 (13.8)
.692 (17.6)
.452
(11.5)MAX.
HOLE FOR
NO. 8 SCREW
AC
AC
.042 (1.1)
.080 (2.0)
(11.5)
DIA.
TYP.
.452 MAX.
(15.0)
.591 MAX.
.732 (18.6)
.692 (17.6)
AC
AC
1.181 (30.0)
1.102 (28.0)HOLE FOR NO.
8 SCREW
1.181 (30.0)
1.102 (28.0)
.468 (11.9)
.429 (10.9)
.732 (18.6)
.692 (17.6)
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS FORWARD CURRENT, (uA)
CASE TEMPERATURE, (OC)
0
1
0.1
10
100
1000
AVERAGE FORWARD CURRENT, (A)
0
7
14
21
28
35
42
20 40 60 80 100 120 140
150100500
0 0.5 1.0 2.0 2.5 3.5 4.0
1
10
100
500
3.01.5 4.5
FIG.3 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.2 TYPICAL REVERSE
CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT, (A)
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT, (A)
1
500
600
100
0
200
400
300
2 5 10 20 50 100
FIG.4 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
Single Phase Half Wave
60Hz Inductive or
Resistive Load
0.375" (9.5mm) Lead Length
8.3mS Single Half Sine-Wave
JEDEC Method
T
J
= 25 OC
Pulse width=300mS
1% Duty Cycle
T
A
= 100 OC
T
A
= 25 OC
T
A
= 75 OC
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
