JT/LJT specifications CONTACT RATING Test Current Maximum Millivolt Drop Crimp Well Data Maximum Millivolt Drop Crimp* Solder* Hermetic* Contact Size 20 60 22M .028 .001 .141 85 22D .0345 .0010 .141 Contact Size Solder & Crimp 22M 3 2 45 22D 5 3 73 22 5 3 73 20 85 22 .0365 .0010 .141 20 7.5 5 55 20 60 20 .047 .001 .209 16 13 10 49 20 85 16 .067 .001 .209 12 23 17 42 20 85 12 .100 .002 .209 10 (Power) 33 NA 33 NA NA 10 (Power) .137 .002 .355 Hermetic Well Diameter Solder Well Data Nominal Well Depth Well Diameter .029 Nominal Well Depth +.004 -.000 +.004 -.000 +.004 .044 -.004 +.000 .078 -.004 +.004 .116 -.002 .036 NA .094 .125 .141 .141 NA * When tested using silver plated wire. SERVICE RATING** Suggested Operating Voltage (Sea Level) Service Rating AC (RMS) DC Test Voltage (Sea Level) Test Voltage 50,000 Ft. Test Voltage 70,000 Ft. Test Voltage 110,000 Ft. M 400 500 1300 VRMS 550 VRMS 350 VRMS 200 VRMS N 300 450 1000 VRMS 400 VRMS 260 VRMS 200 VRMS I 600 850 1800 VRMS 600 VRMS 400 VRMS 200 VRMS II 900 1250 2300 VRMS 800 VRMS 500 VRMS 200 VRMS ** Please note that the establishment of electrical safety factors is left entirely in the designer's hands, since he is in the best position to know what peak voltage, switching surges, transients, etc. can be expected in a particular circuit. FINISH DATA Aluminum Shell Components Non-Hermetic Suffix Finish Military Proprietary Indicated Finish Standard for JT Types Listed Below Indicated Finish Standard for LJT Types Listed Below Cadmium Plated Nickel Base MS (A) - JT/JTG/JTL/JTP LJT/LJTP Anodic Coating (Alumilite) MS (C) (005) JTS/JTPS/JTLS LJTPS/LJTS (011) JTN/JTPN/JTLN LJTN/LJTPN Indicated Finish Standard for JT Types Listed Below Indicated Finish Standard for LJT Types Listed Below JT( )H/JT( )Y JTL( )H/JTL( )Y LJT( )Y/LJT( )H JTS( )Y JTLS( )Y LJTS( )Y Chromate Treated (Iridite 14-2) Olive Drab Cadmium Plate Nickel Base MS (B) (014) Electroless Nickel MS (F) (023) Hermetic Connectors Suffix Material/Finish Military Proprietary Carbon Steel Shell Tin Plated Shell and Contacts Carbon Steel Shell Tin Plated Shell and Gold Plated Contacts MS (D) Stainless Steel Shell Gold Plated Contacts MS (E) (162) 3 JT/LJT insert availability and identification, alternate positioning Hermetics JT 8-2 LJT 8-3 Class Class Service Solder Crimp Rating H Y* P M 9-6 X X X X 9-7 X 9-22 X 9-3 8-6 8-35 9-35 9-44 P X X P P P P P P P P P P X 8-98 9-98 S X X X P P P** X X X 2 3 2 X 2 P P X X X X X X X P X P X X X X X X X X X X 2 3 X X X X X X 3 2 X X X X 2 3 2 2 P P P P P/S P P P P P P P P P P P P P/S P P P P/S P P P/S P/S P P P/S P P P P P P P 11-2 10-4 11-4 10-5 11-5 11-6 10-13 11-13 S X X 10-35 11-35 10-98 11-98 X X 10-99 11-99 12-3 X 13-3 12-4 13-8 X X X X 13-22 X 13-4 12-8 12-22 12-35 13-35 12-98 13-98 X X 14-4 15-4 14-5 15-5 14-15 15-15 14-18 15-18 14-19 X X X X X X X 15-19 14-35 15-35 14-37 15-37 X X 15-68 X 14-68 14-97 15-97 (P) (S) (2) (3) P X X X X 8-44 8-97 N/A X P P P P P/S P/S P/S P/S P P P P P P P P P P P P P P P P Total Contacts Contact Size 22D 22M 22 20 16 2 2 M 3 3 M 6 6 M 7 7 I 2 M 6 M 4 M 4 I 3 I 2 I 4 4 I 5 5 I 6 6 M 13 M 13 I 6 6 I 7 7 II 3 3 I 4 4 I 8 M 22 M 22 I 10 I 4 II 5 I 15 14 I 18 18 I 19 19 M 37 M 37 1 8 I 12 JT MASTER KEY/KEYWAY ROTATION 12 2 8 (Coax) AB ANGLE OF ROTATION (Degrees) Shell Size 8 10 12 14 16 18 20 22 24 Normal 100 100 100 100 100 100 100 100 100 A 82 86 80 79 82 82 82 85 85 B - 72 68 66 70 70 70 74 74 C - 128 132 134 130 130 130 126 126 D 118 114 120 121 118 118 118 115 115 6 A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The AB angle for a given connector is the same whether it contains pins or sockets. Only the master key/keyway rotates in the shell, and the insert always remains in the same position relative to the minor keys. 4 2 2 AB angles shown are viewed from the front face of the connector, a receptacle is shown below. The angles for the plug are exactly the same except the direction of rotation is opposite of that shown for the receptacle. 3 2 13 13 10 JT REF 8 RELATIVE POSSIBLE POSITION OF ROTATED MASTER KEYWAY (front face of receptacle shown) 22 22 10 4 5 1 37 37 Pin inserts only (consult Sidney, NY for socket availability) Socket inserts only (consult Sidney, NY for pin availability) Not tooled for RP or 02RE Pin inserts only, not tooled for RP or 02RE (consult Sidney, NY for availability) 8 8 4 4 * Same as H with interfacial seal ** Tooled with special terminal only (consult Sidney, NY for availability of standard terminal) Ground plane proprietary option available. See page 51 for further information on ground plane connectors. JT/LJT insert availability and identification, alternate positioning Hermetics JT LJT Class Class Service Solder Crimp Rating H Y* 17-2 16-6 17-6 16-8 17-8 X X 16-13 17-13 2 X X X X 2 2 P P P P P P P P/S 17-22 17-25 16-26 17-26 X X 17-35 X 16-35 16-42 17-42 16-55 17-55 16-99 17-99 18-11 19-11 X X X X X X 19-18 18-28 19-28 18-30 19-30 18-32 19-32 X X X X X X 18-35 19-35 18-53 X 19-53 18-66 X 19-66 19-67 X 18-68 19-68 18-96 20-1 21-1 20-2 21-2 20-11 21-11 20-16 21-16 X X 21-24 X 21-25 X 21-27 X 20-35 21-35 20-39 21-39 20-41 21-41 X X X X 2 X X X X X P X X X X X X 2 X P X P X X X X X P X X P/S P/S P/S P P P P P P/S P P S P P P P P P P P/S P/S P P P P P P P P P P 3 2 3 2 S X X X 2 3 2 X X P S X X X X X X P P P P P P P P S P Total Contacts Contact Size 22D 22M 22 20 16 M 39 I 6 II 8 8 I 13 13 Coax 4 M 24 I 26 M 55 M 42 M 55 I 23 II 11 M 18 I 28 26 2 I 30 29 1 I 32 32 M 66 M 53 M 66 66 M 67 67 I 18 I 9 M 79 M 65 I 11 II 16 I 24 24 I 25 25 I 27 27 M 79 I 39 37 I 41 41 (P) Pin inserts only (consult Sidney, NY for socket availability) (S) Socket inserts only (consult Sidney, NY for pin availability) (2) Not tooled for RP or 02RE 12 8 8 (Coax) (Twinax) 38 1 6 2 Coax 22 2 2 LJT MASTER KEY/KEYWAY ROTATION AB ANGLE OF ROTATION (Degrees) Shell Size 9 11 13 15 17 19 21 23 25 Normal 95 95 95 95 95 95 95 95 95 A 77 81 75 74 77 77 77 80 80 B - 67 63 61 65 65 65 69 69 C - 123 127 129 125 125 125 121 121 D 113 109 115 116 113 113 113 110 110 A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The AB angle for a given connector is the same whether it contains pins or sockets. Only the master key/keyway rotates in the shell, and the insert always remains in the same position relative to the minor keys. 26 55 42 AB angles shown are viewed from the front face of the connector, a receptacle is shown below. The angles for the plug are exactly the same except the direction of rotation is opposite of that shown for the receptacle. 55 21 2 11 14 4 66 53 5 LJT REF RELATIVE POSSIBLE POSITION OF ROTATED MASTER KEYWAY (front face of receptacle shown) 18 9 79 65 11 16 79 2 5 (3) Pin inserts only, not tooled for RP or 02RE (consult Sidney, NY for availability) * Same as H with interfacial seal Ground plane proprietary option available. See page 51 for further information on ground plane connectors. JT/LJT insert availability and identification Hermetics JT LJT Class Class Service Solder Crimp Rating H Y* 21-75 2 21-79 2 X X X X 22-1 23-1 22-2 23-2 X X 23-5 X 23-6 P 2 2 X X X P 22-14 23-14 22-21 23-32 X X X X 23-34 X 23-21 22-32 22-35 23-53 X X 23-55 23-97 X 23-99 X 24-1 25-4 25-7 2 25-11 2 2 2 25-1 24-2 25-2 24-4 24-19 25-19 25-20 X 2 X X X X X X 2 2 3 2 X X 2 X X 24-24 25-24 24-29 X 24-35 25-35 24-37 25-37 24-43 25-43 25-46 24-61 25-61 (P) (S) (2) (3) * ** P X X 3 X X X X X X 25-29 P P X 22-53 22-55 P P P P P X X 23-35 23-36 P P P/S P P P P P P P P P P P P Total Contacts Contact Size 22D 22M 22 20 16 12 8 (Coax) 8 10 (Twinax) (Power) N 4 II 19 M 100 M 85 M 5 5 M 6 6 I 14 II 21 I 32 32 I 34 34 M 100 I 36 36 I 53 53 I 55 55 II 16 16 II 11 11 M 128 M 100 I 56 M 99 N 11 I 19 N 30 I 24 12 I 29 29 M 128 I 37 I 43 23 20 I 46 40 4 I 61 61 12 Coax (See Note 4) 17 (See Note 5) 100 85 14 21 100 128 100 48 8 97 2 2 9 19 10 13** 3 4 12 128 Pin inserts only (consult Sidney, NY for socket availability) Socket inserts only (consult Sidney, NY for pin availability) Not tooled for RP or 02RE Pin inserts only, not tooled for RP or 02RE (consult Sidney, NY for availability) Same as H with interfacial seal Two size 16 contacts dedicated to fiber optics. Consult Sidney, NY or catalog section 12-352 for fiber optic contact information. For RG180/U and RG195/U cables only (consult Sidney, NY for other cable applications) 37 6 2 Size 8 Coax and Twinax are interchangeable (4) MS connector 21-75 is supplied with four size 8 twinax contacts. Proprietary connector 21-75 is supplied with four size 8 coax contacts. (5) MS connector 21-79 has provision for two size 8 coax contacts. Coax contacts are not supplied unless specified by customer. Ground plane proprietary option available. See page 51 for further information on ground plane connectors. JT/LJT insert arrangements black arrangements - JT or LJT green arrangements - JT only blue arrangements - LJT only front face of pin inserts illustrated Insert Arrangement (JT) 8-2 Insert Arrangement (LJT) 8-3 8-6 8-35 8-44 9-3 9-6 9-7 9-22 9-35 9-44 Service Rating M M M M I M M Number of Contacts 2 3 6 7 2 6 4 Contact Size 20 20 22M 22M 20 22D 22 Insert Arrangement (JT) Insert Arrangement (LJT) 8-97 8-98 9-98 M 2 I 2 3 22M 20 20 10-4 10-5 10-13 10-35 10-98 10-99 11-2 11-4 11-5 11-6 11-13 11-35 11-98 11-99 I I I I M M I I Service Rating Number of Contacts 2 4 5 6 13 13 6 7 Contact Size 16 20 20 20 22M 22D 20 20 Insert Arrangement (JT) 12-3 12-4 12-8 12-22 12-35 12-98 14-4 14-5 Insert Arrangement (LJT) 13-3 13-4 13-8 13-22 13-35 13-98 15-4 15-5 Service Rating II I I M M I I II Number of Contacts 3 4 8 22 22 10 4 5 Contact Size 16 16 20 22M 22D 20 12 16 Insert Arrangement (JT) 14-15 14-18 14-19 14-35 14-37 14-68 14-97 Insert Arrangement (LJT) 15-15 15-18 15-19 15-35 15-37 15-68 15-97 I I I M M I I Service Rating Number of Contacts 14 1 18 19 37 37 8 8 4 Contact Size 20 16 20 20 22D 22M 16 20 16 7 CONTACT LEGEND 8 10 12 16 20 22 22M 22D JT/LJT insert arrangements black arrangements - JT or LJT green arrangements - JT only blue arrangements - LJT only front face of pin inserts illustrated Insert Arrangement (JT) Insert Arrangement (LJT) 16-6 16-8 16-13 17-2 17-6 17-8 17-13 17-22 17-25 M I II I Coax M Service Rating Number of Contacts Contact Size 38 1 6 8 13 22D 8 Twinax 12 16 16 16-26 2 2 22 12 Coax 8 Coax 17-26 I 2 26 22D 8 Coax Insert Arrangement (JT) 16-35 16-42 16-55 16-99 18-11 Insert Arrangement (LJT) 17-35 17-42 17-55 17-99 19-11 19-18 Service Rating M M M Number of Contacts 55 42 55 21 2 11 14 22D 22 22M 20 16 16 22D Insert Arrangement (JT) 18-28 18-30 18-32 18-35 18-53 18-66 Insert Arrangement (LJT) 19-28 19-30 19-32 19-35 19-53 19-66 Contact Size Service Rating I I I 20 II M 4 8 Twinax I M M M Number of Contacts 26 2 29 1 32 66 53 66 Contact Size 20 16 20 16 20 22D 22 22M Insert Arrangement (JT) Insert Arrangement (LJT) Service Rating Number of Contacts Contact Size 18-68 19-67 19-68 M I 18-96 20-1 20-2 21-1 21-2 M M I 67 18 9 79 65 22M 16 12 22M 22 CONTACT LEGEND 8 8 10 12 16 20 22 22M 22D JT/LJT insert arrangements black arrangements - JT or LJT green arrangements - JT only blue arrangements - LJT only front face of pin inserts illustrated Insert Arrangement (JT) 20-11 20-16 Insert Arrangement (LJT) 21-11 21-16 21-24 21-25 I II I I I Number of Contacts 11 16 24 25 27 Contact Size 12 16 20 20 20 Insert Arrangement (JT) 20-35 20-39 20-41 Insert Arrangement (LJT) Service Rating 21-27 21-35 21-39 21-41 21-75 Service Rating M I I N Number of Contacts 79 37 2 41 4 Contact Size 22D 20 16 20 (See Note) Insert Arrangement 22-1 22-2 Insert Arrangement (LJT) 23-1 23-2 23-5 23-6 M M M M I Number of Contacts 100 85 5 6 14 Contact Size 22M 22 8 Twinax 8 Twinax 12 Service Rating 21-79 II 17 (See Note) 22D 22-14 23-14 Note: MS connector 21-75 is supplied with four size 8 twinax contacts. Proprietary connector 21-75 is supplied with four size 8 coax contacts. MS connector 21-79 has provision for two size 8 coax contacts. Coax contacts are not supplied unless specified by customer. 9 CONTACT LEGEND 8 10 12 16 20 22 22M 22D JT/LJT insert arrangements black arrangements - JT or LJT green arrangements - JT only blue arrangements - LJT only front face of pin inserts illustrated Insert Arrangement (JT) 22-21 22-32 Insert Arrangement (LJT) 22-35 23-21 23-32 23-34 Service Rating II I I M Number of Contacts 21 32 34 100 Contact Size 16 20 20 22D 22-53 22-55 23-36 23-53 23-55 I I I II Number of Contacts 36 53 55 16 Contact Size 20 20 20 16 24-1 24-2 24-4 25-4 Insert Arrangement (JT) Insert Arrangement (LJT) Service Rating Insert Arrangement (JT) Insert Arrangement (LJT) 23-35 23-97 23-99 25-1 25-2 Service Rating II M M Number of Contacts 11 128 100 48 8 Contact Size 16 22M 22 20 16 10 CONTACT LEGEND I 8 10 12 16 20 22 22M 22D JT/LJT insert arrangements black arrangements - JT or LJT green arrangements - JT only blue arrangements - LJT only front face of pin inserts illustrated Insert Arrangement (JT) 24-19 Insert Arrangement (LJT) 25-7 25-11 25-19 M N I Service Rating Number of Contacts Contact Size 25-20 N 97 2 2 9 19 10 13 3 4 22D 8 Twinax 20 10 12 20 16 8 Twinax 12 Coax (Locations U and Y - Dedicated to Fiber Optics) Insert Arrangement (JT) 24-24 24-29 24-35 24-37 Insert Arrangement (LJT) 25-24 25-29 25-35 25-37 I I M I Service Rating Number of Contacts 12 12 29 128 37 Contact Size 16 12 16 22D 16 Insert Arrangement (JT) 24-43 Insert Arrangement (LJT) 25-43 25-46 I I Service Rating 24-61 25-61 I Number of Contacts 23 20 40 4 2 61 Contact Size 20 16 20 16 8 Coax 20 Coax contacts for RG180 or RG195 cable. 11 CONTACT LEGEND 8 10 12 16 20 22 22M 22D JT/LJT -- accessories strain relief (crimp type) !" # For MS stamping identification, accessories must be ordered by MS part number. If ordered by 10-part number, they will be stamped with said number. *To complete order number, add shell size and suffix number. 10-Number Suffix Finish Chromate treat -XX0 Anodic coating -XX5 MS27506 Suffix M85049/49 Suffix CXX-2 (-2-XXA) NA Cadmium plate nickel base -XX7 AXX-2 NA Olive drab, cadmium, nickel base -XX9 BXX-2 (-2-XXW) Electroless nickel -XXG FXX-2 (-2-XXN) For example: Shell size 10 with cadmium plate, nickel base would be10-405982-107 or M85049/49-2-10W Shell Size B Dia +.010 -.025 Y Thread (Modified) G Max. L Max Size Class 2B Modified Minor Dia. BB Dia. +.000 -.011 Screw Size 8 .125 .775 .984 .4375-28UNEF .399 - .405 .250 6-32UNC 10 .188 .837 .984 .5625-24UNEF .524 - .529 .312 6-32UNC 12 .312 .963 .984 .6875-24UNEF .649 - .654 .438 6-32UNC 14 .375 1.087 1.234 .8125-20UNEF .766 - .771 .562 6-32UNC 16 .500 1.150 1.234 .9375-20UNEF .891 - .896 .625 6-32UNC 18 .625 1.400 1.234 1.0625-18UNEF 1.002 - 1.007 .750 8-32UNC 20 .625 1.400 1.234 1.1875-18UNEF 1.135 - 1.140 .750 8-32UNC 22 .750 1.587 1.359 1.3125-18UNEF 1.252 - 1.257 .938 8-32UNC 24 .800 1.681 1.281 1.4375-18UNEF 1.377 - 1.382 1.000 8-32UNC All dimensions for reference only. Note: For solder type cable clamp 10-241055-XXX (M85049/49) consult Amphenol, Sidney, NY. For other M85049 accessories available from Amphenol Aerospace, see page 46. 28 LJT -- accessories plug protection cap * To complete order number, add shell size and suffix number. For example, shell size 11 with cadmium plate, nickel base would be 10-421399-117, MS27501A11C or MS20048A11. Shell Size B Dia. Ref. D Dia. Max. M .250 N Dia. +.001 -.005 Finish 10Number Suffix MS Number Suffix with chain MS Number Suffix without chain 9 .180 .812 3.000 .572 Chromate treat -XX0 11 .180 .938 3.000 .700 Anodic coating -XX5 13 .180 1.062 3.500 .850 Cadmium plate nickel base -XX7 AXXC AXX 15 .180 1.188 3.500 .975 Olive drab, cadmium, nickel base -XX9 BXXC BXX 17 .180 1.312 3.500 1.100 Electroless nickel -XXG FXXC FXX 19 .209 1.438 3.500 1.207 21 .209 1.562 4.000 1.332 23 .209 1.688 4.000 1.457 25 .209 1.812 4.000 1.582 All dimensions for reference only. 38 JT/LJT -- thermocouple contacts, plastic protection caps, sealing plugs THERMOCOUPLE CONTACTS Contact Size JT/LJT Pins JT Sockets LJT Sockets Chromel 10-407862-310 10-407863-310 10-407236-310 Alumel 10-407862-320 10-407863-320 10-407865-320 Iron 10-407862-335 10-407863-335 10-407865-335 Constantan 10-407862-342 10-407863-342 10-407865-342 Material 20 Partial listing. If you do not see the contact for your application, consult Amphenol, Sidney, NY. PLASTIC PROTECTION CAPS JT LJT 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Plug SEALING PLUGS Sealing Plugs Receptacle 10-70500-10 10-70506-10S Contact Size 10-70506-14 10-70500-10 8 (Coax) 10-482099-8 MS27488-8 10-70506-14 10-70506-12 8 (Twinax) T3-4008-59P N/A 10-70506-16 10-70500-12 10 (Power) 10-576225 N/A 10-70506-16 10-70506-14 12 10-405996-12 MS27488-12 10-70506-18 10-70500-14 16 10-405996-16 MS27488-16 10-70506-18 10-70506-16 20 10-405996-20 MS27488-20 10-70506-20 10-70500-16 22 10-405996-22 MS27488-22 10-70506-20 10-70506-18 22M 10-405996-22 MS27488-22 10-70506-22 10-70500-18 22D 10-405996-22 MS27488-22 10-70506-22 10-70506-20 10-70506-24 10-70500-20 10-70506-24 10-70506-22 10-70576-24 10-70500-22 10-70576-24 10-70506-24 10-70506-28 10-70500-24 10-70506-28 10-70576-24 10-558651-25 10-70506-28 45 Proprietary No. MS No. JT/LJT -- accessories M85049 strain reliefs, adapters, backshells, "ABK" heat shrinkable backshells MIL-C-85049 Accessories Now available through Amphenol are: * Strain Reliefs (self-locking, nonself-locking, clamps & tie mounts) * Shrink boat adapters (environmental and non-environmental) * Backshells (environmental and non-environmental) Part numbers covered are: M85049/14, /15, /16, /17, /18, /19, /20, /21, /27, /33, /36, /37, /38, /39, /47, /49-2, /57, /62, /63, /69. Consult Amphenol Aerospace, Sidney, NY for further information. MIL-C-85049 Accessories "ABK" Heat Shrinkable Backshells - One Part Cable Termination for MIL-C-38999 Series I, II, III & IV "ABK" Heat Shrinkable Backshells Benefits of "ABK" assemblies are: * One piece part * Quick and easy installation * One part covers wide cable range * Lightweight * Stainless and aluminum adapters * F, W and C Class finishes * Shielded and Unshielded * Straight, 45 and 90 configurations * Various material, i.e. LFH, fluid resistant * Operating temp. range - 55C to +150C * Repairable Amphenol "ABK" Heat Shrinkable backshell kits are one-part assemblies for terminating MIL-C-38999 Series I, II, III & IV connectors to either shielded or unshielded cables. Constructed using Spin Coupling adapters and heat-shrinkable molded parts, the kit comprises components already well proven in harsh military environments. Installation is simply effected by coupling the adapter to the connector and shrinking the rear of the molded part onto the cable with a hot air gun. The molded part has a hot melt adhesive preinstalled to provide a bond between the cable jacket and the molded part. When used in conjunction with shielded cables, the assembly provides electrical continuity between the cable shield and the connector with RayatenTM molded parts which provide screening levels better than 90 DB at 100 MHz. For more information on "ABK" backshells, including how to order and cable ranges, consult Amphenol Aerospace, Sidney, NY. 46 JT/LJT application tools ing the JT-R, LJT-R and MS series connectors will provide reliable crimped wire to contact terminations. There is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. For additional information on coaxial contacts, consult Amphenol(R) catalog section 12-130. The following data includes information pertaining to the application tools which have been established for crimping, inserting, and removing the size 12, 16, 20, 22, 22D and 22M contacts incorporated in the JT-R, LJT-R and MIL-C-38999 (MS) series connectors as applicable. All crimping tools included are the "full cycling" type and when used as specified in the installation instructions (L-624 and L-844 cover- CRIMPING TOOLS Contact Size/Type 12 Pin and Socket 16 Pin and Socket 20 Pin and Socket 22, 22D, 22M Pin 22, 22D, 22M Socket (LJT-R) 22D Socket (JT-R) 8 Twinax Center Pin and Socket 8 Twinax Intermediate Outer Pin & Socket Crimping Tool Turret Die or Positioner Contact Size/Type M22520/1-01 M22520/1-01 M22520/7-01 M22520/1-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/1-04 M22520/1-04 M22520/7-04 M22520/1-04 M22520/2-10 M22520/7-08 M22520/2-09 M22520/7-07 M22520/2-07 M22520/7-05 M22520/2-06 M22520/7-06 M22520/2-37 8 Coaxial Inner Pin and Socket M22520/5-01 M22520/5-200 10 (Power) Crimping Tool Turret Die or Positioner M22520/2-01 M22520/2-31 M22520/5-01 8 Coaxial Outer Pin and Socket M22520/5-01 M22520/10-01 16 Coaxial Inner Pin and Socket 16 Coaxial Outer Pin and Socket M22520/5-05 Die Closure B M22520/5-41 Die Closure B M22520/10-07 Die Closure B M22520/2-01 M22520/2-35 M22520/4-01 M22520/4-02 12 Coaxial Inner Pin and Socket M22520/2-01 M22520/2-34 12 Coaxial Outer Pin and Socket M22520/31-01 M22520/31-02 Straight Type Proprietary Part Number Color Code Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. The above crimping tools and positioners are available from the approved tool manufacturer. INSERTION TOOLS Plastic Tools Metal Tools Angle Type Use with Contact Size 10 (Power) 12 16 20 22 22D, 22M 8 Coaxial 8 Twinax Color Code Part Number M81969/14-05* M81969/14-04* M81969/14-03* M81969/14-10* M81969/14-09 M81969/14-01* MS Part Number Gray/White Yellow/(White) Blue/(White) Red/(Orange) Brown/(White) Green/(White) None Proprietary Part Number M81969/8-11 M81969/8-09 11-8674-12 M81969/8-07 11-8674-16 M81969/8-05 11-8674-20 M81969/8-03 11-8674-22 M81969/8-01 11-8674-24 None Required M81969/46-06** 11-8794-12 11-8794-16 11-8794-20 11-8794-22 11-8794-24 None Green Yellow Blue Red Brown Black Red REMOVAL TOOLS Plastic Tools Metal Tools Angle Type Use with Contact Size 10 (Power) 12 16 20 22 22D, 22M 8 Coaxial 8 Twinax Part Number Color Code M81969/14-05* M81969/14-04* M81969/14-03* M81969/14-10* M81969/14-09* M81969/14-01* M81969/14-12 M81969/14-12 (Green)/White (Yellow)/White (Blue)/White (Red)/Orange (Brown)/White (Green)/White Green Green For Unwired Contacts Proprietary Part Number 11-10050-11 11-10050-10 11-10050-9 11-10050-8 11-10050-7 None None The M81969/8, 11-8674, 11-8675, and 11-8794 metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as follows: Contact size 12- .155, 16- .109, 20- .077, 22, 22D, 22M- .050. When wire diameters exceed those specified, the plastic tools must be used. MS Part Number M81969/8-12 M81969/8-10 M81969/8-08 M81969/8-06 M81969/8-04 M81969/8-02 None M81969/46-12** 47 Proprietary Part Number 11-8675-12 11-8675-16 11-8675-20 11-8675-22 11-8675-24 11-9170 11-9170 Straight Type Proprietary Part Number Color Code 11-8795-12 11-8795-16 11-8795-20 11-8795-22 11-8795-24 DRK264-8 N/A Green/White Yellow/White Blue/White Red/White Brown/White Black/White N/A N/A * Double ended insertion/removal tool. ** Twinax insertion and removal tools are available only in a straight type, metal version. To be determined Contact Daniels Manufacturing Co. for availability. JT/LJT how to order PROPRIETARY PART NUMBER To more easily illustrate ordering procedure, part number JT00RE-22-2PA( ) is shown as follows: PART NUMBER JT 00 RE 1 2 3 - 22 - 4 2 P A ( ) 5 6 7 8/9 See code below: 1. Connector Type: JT designates standard Junior Tri-Lock connector LJT designates long Junior Tri-Lock connector LJTS JTS designates high temperature connector LJTN JTN designates chemical and fuel resistant JTL designates miniature mounting dimensions JTLN designates miniature mounting dimensions chemical resistant JTLS designates miniature mounting dimensions high temperature LJTPQ JTPQ designates back panel mounted wall mounting receptacle LJTP JTP designates back panel mounted box mounting receptacle LJTPN JTPN designates back panel mounted - chemical resistant LJTPS JTPS designates back panel mounted - high temperature JTG designates plug with grounding fingers* JTNG designates plug with grounding fingers* chemical resistant 2. Shell Style: 00 designates wall mount receptacle 01 designates line mount receptacle 02 designates box mount receptacle 06 designates straight plug 07 designates jam nut receptacle 08 designates 90 degree plug I designates solder mount receptacle - hermetic 3. Service Class: Crimp contacts/connectors: "RP" for potting crimp applications. Supplied with spacer grommet and potting boot. "RE" for environmental crimp applications. Supplied with a grommet and compression nut. Can be supplied with strain relief integral with compression nut "RE (SR)". (JT Series only). "RGF"** electroless nickel plated ground plane aluminum, 200C "RGW"** olive drab cadmium plated ground plane aluminum, 175C "RT" for environmental applications. Supplied without rear accessories. Design provides serrations on rear threads of shells. For additional information defining description of service class, consult Amphenol, Sidney, NY. 4. Shell Size: JT shell sizes available from 8 through 24. LJT shell sizes available from 9 through 25. 5. Insert Arrangement: 22-2 designates insert arrangement. Refer to pages 4-9 for insert availability. 6. Contact Style: P designates pin contacts; S designates socket contacts. 7. Alternate Keying: "A" designates alternate keying connector assembly. Other basic alternate keys are "B", "C" and "D". No letter required for normal (no rotation) position. See pages 4 and 5. 8. Strain Relief Option: "SR" designates a strain relief clamp. Strain reliefs are available only on "A", "C" and "RE" class connectors. 9. Finish Variation Suffix: See finish variations available in table below: 3. Service Class: Solder contacts/connectors: "P" for potting applications - These connectors are supplied with a potting boot. All shells are designed with integral features to retain potting boots. "A" for general duty applications. "A (SR)" - threaded rear design with strain relief. "C" for pressurized applications. "C" (SR)" - threaded rear design with strain relief. "H" for hermetic applications - Fused compression glass sealed inserts. Leakage rate less than .01 micron cu. ft./hr. (1 x 10-7 cc/sec.) at 15 psi differential. "Y" same as "H" with interfacial seal. "T" for MS27599A applications - general duty, pressurized (receptacles only) Finish Cadmium plated nickel base Military Finish Data A Finish Finish plus Suffix "SR" Suffix (SR) Olive drab cadmium plate nickel base B (014) (386) Electroless nickel F (023) (424) (453) (467) C (005) (300) (011) (344) Electroless nickel, space compatible Anodic coating (Alumilite) Chromate treated (Iridite 14-2) MILITARY TYPES MS27473 E 14 A 18 P A Shell Size Military Service Class E environmental, same as RE T environmental, same as RT P potting, same as RP Y hermetically sealed, same as Y Finish For finish variations see above chart. For additional data, see page 3. Insert Arrangement For MS depictions and dimensional data see applicable Mil-Spec. (MIL-DTL-38999, MIL-C-27599). MS Number Service Class Contact Style (P or S) Alternate Keying (No letter required for normal position) Amphenol Vendor Identification/FSCM 77820 49 * Grounding fingers standard on all LJT plugs Not applicable to box mounting style or LJT Series I. ** For more information on Coax/Triax/Twinax Ground Plane Connectors, see page 51.