NFS40-7612J - Artesyn Embedded Technologies

313

process

yellow

3405

1797

1375

116

2607

652

242

2985

375

240

Embedded Power for

Business-Critical Continuity

NFS40 Series

SIngle and

triple output

Special Features

• 5.0 x 3.0 x 1.2 inch package

(1U applications)

• Industry standard package

• Overvoltage and

short circuit protection

• 40 W with free air convection

• 50 W with 20 CFM forced air

• EN55022, EN55011

conducted noise level B

• UL, VDE and CSA

safety approvals

• Available RoHS compliant

• 2 year warranty

Total Power: 40 - 50 W

Input Voltage: 85 - 264 Vac

120 - 370 Vdc

# of Outputs: Single, triple

Safety

• VDE0805/EN60950/

• IEC950/IEC1010

• File No. 10401-3336-0044

• License No. 2559

• UL60950-1 File No. E13002

• CSA C22.2 No. 950

• File No. LR41062C

Rev.11.02.11_65

NFS40 Series

1 of 4

Electrical Specications

Input

Voltage adjustability: +5 V output on triples

Vout on singles

± 5.0%

Line regulation:

LL to HL, FL

Main output

Auxiliary outputs

± 0.2%

± 1.0%

Load regulation:

FL to NL

Main output

Auxiliary outputs

± 2.0%

± 5.0%

Transient response: +5 V (1.5 - 3 A) ± 120 mV max. dev.

500 µs recovery

Temperature coefcient: All outputs ± 0.02%/°C

Overvoltage protection: +5 V output S3.15 A, 250 Vac In live and neutral

Output power limit: Primary power limited 90 W input power limit

Short circuit protection: Single outputs

Multiple outputs

Continuous

Short term

Output

Input voltage range: Universal input 85 - 264 Vac

120 - 370 Vdc

Input frequency range: 47-440 Hz

Max. input surge current: 132 Vac, cold start

264 Vac, cold star

12 A max.

24 A max.

Safety ground leakage current: 110 Vac, 60 Hz

230 Vac, 50 Hz

0.13 mA, max.

0.32 mA, max.

Rev.11.02.11_65

NFS40 Series

2 of 4

Embedded Power for

Business-Critical Continuity

313

process

yellow

3405

1797

1375

116

2607

652

242

2985

375

240

All specications are typical at nominal input, full load at 25 °C unless otherwise stated

Specications

Environmental Specications

Thermal performance: Operating 0° C to +70 °C

(See notes 8, 10) Non-operating -40 °C to +85 °C

50 °C ambient temp.,

convection cooled

40 W

Forced air cooling 50 W @ 20 CFM

+50 °C to +70 °C ambient Derate linearly to 50% load

Peak (60 seconds) 60W

Relative humidity: Non-condensing 5 to 80% RH

Altitude: Operating 10,000 feet max.

Non-operating 40,000 feet max.

Vibration (See Note 11): 5-500 Hz 2.4 G rms peak

EMC Charateristics (11, 12)

Conducted emissions: EN55022, FCC part 15 Level B

Radiated emissions: EN55022 Level A

ESD air: EN61000-4-2, level 3 Perf. criteria 1

ESD contact: EN61000-4-2, level 4 Perf. criteria 1

Surge: EN61000-4-2, level 3 Perf. criteria 1

Fast transients: EN61000-4-4, level 3 Perf. criteria 1

Radiated immunity: EN61000-4-3, level 3 Perf. criteria 2

Conducted immunity: EN61000-4-6, level 3 Perf. criteria 2

General Specications

Hold-up time: 110 Vac, 40 W

230 Vac, 40 W

14 ms

110 ms

Efciency: 70% typical

Isolation voltage: Input/output

Input/chassis

3000 Vac

1500 Vac

Switching frequency: Variable

Approvals and standards: (see

Notes 9, 13)

VDE0805, EN60950, IEC950, IEC1010,

UL1950, CSA C22.2 No. 950

Weight: 280 g (9.88 oz)

MTBF demonstrated: MIL-HDBK-217E 170,000 hours

Rev.11.02.11_65

NFS40 Series

3 of 4

Embedded Power for

Business-Critical Continuity

313

process

yellow

3405

1797

1375

116

2607

652

242

2985

375

240

Notes

1 Natural convection cooled, 40 W maximum.

2 Peak output current lasting less than 30 seconds with duty cycle less than 10%.

During peak loading, outputs may go outside of total regulation limits. Peak

total power must not exceed 60 W.

3 Forced air, 20 CFM at 1 atmosphere, 50 W maximum.

4 Figure is peak-to-peak. Output noise is measured across a 50 MHz bandwidth

using a 12 inch twisted pair, terminated with a 47 µF capacitor.

5 Total regulation is dened as the static output regulation at 25 °C, including

initial tolerance, line voltage within stated limits, load currents within stated

limits, and output voltages adjusted to their factory settings. Also, 0.25<I(A)/

I(B)<5.0 to maintain stated regulation. This does not apply to the NFS40-7628J

power supply as it has regulated auxiliary outputs.

6 A minimum load of 0.5 A is required on the +5 V output to obtain full current

from the negative output.

7 The NFS40 offers the possibility of power sharing between outputs. Consult

factory for details.

8 Derating curve is application specic for ambient temperatures >50 °C, for

optimum reliability no part of the heatsink should exceed 110 oC and no

semiconductor case temperature should exceed 115 oC.

9 A 4 W minimum load is recommended to achieve the design MTBF.

10 Caution: Allow a minimum of 1 second after disconnecting the power when

making thermal measurements.

11 Three orthogonal axes, sweep at 1 octave/minute, 5 minute dwell at four major

resonances.

12 The NFS40-7628J has separately linear regulated +12 V and -12 V outputs. The

loading conditions in Notes 5 and 6 do not apply.

13 This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

14 The ‘J’ sufx indicates that these parts are Pb-free (RoHS 6/6) compliant.

15 NOTICE: Some models do not support all options. Please contact your local

Emerson Network Power representative or use the on-line model number

search tool at http://www.Emerson.com/EmbeddedPower to nd a suitable

alternative.

Ordering Information

Output

Voltage

Output Currents Ripple (4) Total

Regulation (5)

Model Numbers (13, 14, F)

Max (1) Peak (2) Fan (3)

+5.1 V (A) 3 A 7 A 5 A 50 mV ± 2.0% NFS40-7608J (5,6)

+12 V (B) 2 A 3 A 2 A 120 mV ± 5.0%

–12 V (C) 0.35 A 1 A 0.5 A 120 mV ± 5.0%

+5.1 V (A) 4 A 7 A 5 A 50 mV ± 2.0% NFS40-7628J (12)

+12 V (B) 0.35 A 1 A 0.5 A 120 mV ± 5.0%

-12 V (C) 0.35 A 1 A 0.5 A 120 mV + 5.0%

+5.1 V (A) 3 A 7 A 5 A 50 mV ± 2.0% NFS40-7607J (5,6)

+12 V (B) 2 A 3 A 2 A 120 mV ± 5.0%

-5.0 V (C) 0.35 A 1 A 0.5 A 50 mV ± 5.0%

+5.1 V (A) 3 A 7 A 5 A 50 mV ± 2.0% NFS40-7610J (5,6)

+15 V (B) 2 A 2.5 A 2 A 150 mV ± 10.0%/-3.0%

–15 V (C) 0.35 A 1 A 0.5 A 150 mV ± 5.0%

3.3 V 6 A 12 A 8 A 100 mV ± 2.0% NFS40-76S3J

+5.1 V 6 A 12 A 8 A 100 mV ± 2.0% NFS40-7605J

+12.0 V 3.3 A 5 A 4 A 120 mV ± 2.0% NFS40-7612J

+15.0 V 2.6 A 4 A 3.3 A 150 mV ± 2.0% NFS40-7615J

+24.0 V 1.6 A 2.5 A 2 A 240 mV ± 2.0% NFS40-7624J

Pin Connections

J1 -7608J, -7628J -7607J -7610J SINGLES

Pin 1 AC Live AC Live AC Live AC Line

Pin 2 AC Neutral AC Neutral AC Neutral AC Neutral

Pin 1 +12 V +12 V +15 V +Vout

Pin 2 +5.1 V +5.1 V +5.1 V +Vout

Pin 3 +5.1 V +5.1 V +5.1 V +Vout

Pin 4 Return Return Return Return

Pin 5 Return Return Return Return

Pin 6 -12 V -5 V -15 V Return

P1(c)

Pin 1 Safety Ground

DERATING CURVE

Output Power (Watts)

0C 10C 20C 30C 40C 50C 60C 70C

20W

40W

50W

20 CFM FORCED AIR COOLING

25W

NATURAL

CONVECTION

COOLING

313

process

yellow

3405

1797

1375

116

2607

652

242

2985

375

240

Embedded Power for

Business-Critical Continuity

Rev.11.02.11_65

NFS40 Series

4 of 4

0.156 (3.96) Dia.

(4 Places)

5.00

(127.00)

NON-METALLIC

STAND-OFF

(SEE NOTE A)

MAXIMUM

COMPONENT

HEIGHT 1.2 inches

P1 (SEE NOTE C)

F 3.15A, H 250VAC

2.550

(64.8)

0.22

(5.59)

3.00

(76.2)

0.22 (5.59)

4.55

(115.8)

ALL DIMENSIONS IN INCHES (mm)

Mechanical Notes

A In order to meet safety requirements, a non-metallic stand-off is mandatory for one hole as specied in the mechanical

drawing above.

B The ground pad of the mounting hole near P1 allows system grounding through a metal stand-off.

C To improve conducted noise, the ground pad of the mounting hole near the output connector should be connected with

the ground pad of the mounting hole near P1. Use metal stand-offs attached to a common metal chassis. This connection

also signicantly attenuates common mode noise.

D A standard enclosure kit is available for mounting which contains all screws, connectors and necessary mounting

hardware. Order part number NFS40CJ.

Mechanical Drawing

Americas

5810 Van Allen Way

Carlsbad, CA 92008

USA

Telephone: +1 760 930 4600

Facsimile: +1 760 930 0698

Europe (UK)

Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX

United Kingdom

Telephone: +44 (0) 1384 842 211

Facsimile: +44 (0) 1384 843 355

Asia (HK)

14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon

Hong Kong

Telephone: +852 2176 3333

Facsimile: +852 2176 3888

For global contact, visit:

www.Emerson.com/EmbeddedPower

techsupport.embeddedpower

@emerson.com

While every precaution has been taken to ensure

accuracy and completeness in this literature, Emerson

Network Power assumes no responsibility, and disclaims

all liability for damages resulting from use of this

information or for any errors or omissions.

Emerson Network Power and the Emerson

Network Power logo are trademarks and

service marks of Emerson Electric Co.

EmersonNetworkPower.com

Embedded Computing

Embedded Power

Monitoring

Outside Plant

Power Switching & Controls

Precision Cooling

Racks & Integrated Cabinets

Services

Surge Protection

Emerson Network Power.

The global leader in enabling

business-critical continuity.

AC Power

Connectivity

DC Power

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Artesyn Embedded Technologies:

NFS40-7607J NFS40-7615J NFS40-76S3J NFS40-7924J NFS40-7928J NFS40-7605J NFS40-7608J NFS40-

7610J NFS40-7612J NFS40-7624J NFS40-7628J NFS40-7908J NFS40-7910J NFS40CJ