M55342H01B174AR - State of the Art, Inc.

STATE OF THE ART, INC.STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-17972470 Fox Hill Road, State College, PA 16803-1797

Phone (814) 355-8004 Fax (814) 355-2714Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401Toll Free 1-800-458-3401

Where Quality Isn't a Goal...It's Our TraditionWhere Quality Isn't a Goal...It's Our Tradition

POWER DERATING

10/25/00

M55342/01 Thin Film Chip Resistor

0502 Size, Surface Mount, Solderable

FEATURES

• Tolerances to ± 0.1%

• Operating temperature range :

-55 C to +150 C

• Pretinned (Sn60) nickel barrier

terminations

°°

• Tolerances to ± 0.1%

•Operating temperature range :

-55 C to +150 C

•Pretinned (Sn60) nickel barrier

terminations

°°

• TCR's to ± 25 ppm

• Suitable for solder reflow, vapor

phase, or wave solder attachment

• TCR's to ± 25 ppm

• Suitable for solder reflow, vapor

phase, or wave solder attachment

PROTECTIVE

ENCAPSULANT

PROTECTIVE

ENCAPSULANT

WRAPAROUND

TERMINATIONS

PRETINNED

WRAPAROUND

TERMINATIONS

PRETINNED

99.6% ALUMINA CHIP99.6% ALUMINA CHIP

PRECISION

THIN FILM

RESISTOR

PRECISION

THIN FILM

RESISTOR

OPTIONS

Termination type wraparound style (pretinned with a Ni barrier),

and type W (wire bondable) are available. Also available in

thick film MIL-PRF-55342 characteristic K & M. SOTA offers a

full line of component parts in the 0502 size including Standard

Grade, High-Reliability (customer specified testing), and zero-

ohm jumpers.

Termination type wraparound style (pretinned with a Ni barrier),

and type W (wire bondable) are available. Also available in

thick film MIL-PRF-55342 characteristic K & M. SOTA offers a

full line of component parts in the 0502 size including Standard

Grade, High-Reliability (customer specified testing), and zero-

ohm jumpers.

All product levels are based on the same design as our "R" level failure rate Established

Reliability part. Level C is a Non-Established Reliability part requiring no group A, B or C

testing. Established Reliability (failure rates based on life testing) product levels M,P, and R

are subject to group A, B and C testing per MIL-PRF-55342. Space product level T requires

group Aand B tests including 100% power conditioning.

All product levels are based on the same design as our "R" level failure rate Established

Reliability part. Level C is a Non-Established Reliability part requiring no group A, B or C

testing. Established Reliability (failure rates based on life testing) product levels M,P, and R

are subject to group A, B and C testing per MIL-PRF-55342. Space product level T requires

group Aand B tests including 100% power conditioning.

* PRODUCT LEVELS* PRODUCT LEVELS

Two packaging options are available:

Waffle Pack - (360 per Tray Max.)

Tape & Reel - (5000 per 7" Inch Reel Max.)

Two packaging options are available:

Waffle Pack - (360 per Tray Max.)

Tape & Reel - (5000 per 7" Inch Reel Max.)

PACKAGING

TCR (-55 to +125 C in ppm/ C)

Thermal Shock

Low Temperature Operation

Short-time Overload

Resistance to Bonding Exposure

Moisture Resistance

High Temperature Exposure

Life

(1) 0.1% tolerance 100 to 150 K

(2) Typical resistance change, the maximum is the

same as MIL-PRF-55342. Test methods are per

MIL-PRF-55342.

°°

TCR (-55 to +125 C in ppm/ C)

Thermal Shock

Low Temperature Operation

Short-time Overload

Resistance to Bonding Exposure

Moisture Resistance

High Temperature Exposure

Life

(1) 0.1% tolerance 100 to 150 K

(2) Typical resistance change, the maximum is the

same as MIL-PRF-55342. Test methods are per

MIL-PRF-55342.

°°

< 100 ppm

±0.03%

±0.02%

±0.03%

±0.05%

See Chart

< 100 ppm

±0.03%

±0.02%

±0.03%

±0.05%

See Chart

ENVIRONMENTAL PERFORMANCE (2)ENVIRONMENTAL PERFORMANCE (2)

Resistance Range(1) 5.6 - 1M

Tolerances 0.1%,1%, 2%, 5% 10%

Maximum Power TCR's (E,H=10mW) (K=20mW)

Maximum Voltage 40 Volts

WWResistance Range(1) 5.6 - 1M

Tolerances 0.1%,1%, 2%, 5% 10%

Maximum Power TCR's (E, H = 10 mW) (K = 20 mW)

Maximum Voltage 40 Volts

Solderability: Solder coating compatible with Sn60, 62 or

63 solders, provides good wetting with all types of solder

attachment. All product is tested IAW Mil-Std-202,

method 208, including 8 hour steam aging.

Solderability: Solder coating compatible with Sn60, 62 or

63 solders, provides good wetting with all types of solder

attachment. All product is tested IAW Mil-Std-202,

method 208, including 8 hour steam aging.

PART NUMBERING

PERFORMANCE CHARACTERISTICSPERFORMANCE CHARACTERISTICS

M55342 H 01B 100D RM55342 H 01B 100D R

PRODUCT LEVEL DESIGNATOR*

M: 1% per 1000 hrs. R: 0.01% per 1000 hrs.

P: 0.1% per 1000 hrs T: Space Level

C: Non - ER

PRODUCT LEVEL DESIGNATOR*

M: 1% per 1000 hrs. R: 0.01% per 1000 hrs.

P: 0.1% per 1000 hrs T: Space Level

C: Non - ER

TCR

E: ±25 ppm H: ±50 ppm K: ±100 ppm

TCR

E: ±25 ppm H: ±50 ppm K: ±100 ppm

RESISTANCE AND TOLERANCE CODE

Three significant digits, with a letter indicating the

decimal location, and the tolerance, and the value range

(,K,M)

A: 0.1% D: 1% G: 2% J: 5% M: 10%

B: 0.1%K E: 1%K H: 2%K K: 5%K N: 10%K

C: 0.1%M F: 1%M T: 2%M L: 5%M P: 10%M

WW W

WWWW W

WW W W W

RESISTANCE AND TOLERANCE CODE

Three significant digits, with a letter indicating the

decimal location, and the tolerance, and the value range

(,K,M)

A: 0.1% D: 1% G: 2% J: 5% M: 10%

B: 0.1%K E: 1%K H: 2%K K: 5%K N: 10%K

C: 0.1%M F: 1%M T: 2%M L: 5%M P: 10%M

WW W

WWWW W

WW W W W

MECHANICAL

CURRENT NOISE

TYPICAL LIFE TEST PERFORMANCE

INCHES

.055 (±.006)

.025 (±.005)

.010 - .033

.010 (±.005)

.015 (±.005)

.0016 grams

INCHES

.055 (±.006)

.025 (±.005)

.010 - .033

.010 (±.005)

.015 (±.005)

.0016 grams

Length

Width

Thickness

Top Term.

Bottom Term.

Approx. Weight

Length

Width

Thickness

Top Term.

Bottom Term.

Approx. Weight

1.40 (± 0.15)

.64 (± 0.13)

.25 - .84

.25 - (±0.13)

.38 - (±0.13)

1.40 (± 0.15)

.64 (± 0.13)

.25 - .84

.25 - (±0.13)

.38 - (±0.13)