SS-33-10-P - 3M Electronic Specialty

386

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS

Offers accessory products to assist with splice rejacketing,

cable jacket sealing, grounding and cable preparation.

Many of the products shown here are used with 3M splices

and terminations. Remember to reference those sections for

more product information.

Cable

Accessory

Products

Splice Rejacketing 387

Splice Repair 390

3 M ™ Safety Sock Grounding Kits,

Shielded and Jacketed URD Cable 391

Sealing and Grounding 393

3/C Cable Breakout Boots and

3/C Phase Rejacketing System 395

Insulating and Sealing Compounds 408

Mounting Brackets 410

3M™ Cold Shrink Corrosion Protection Kit

CPT Series 411

Preparation and Cleaning 413

3M™ Electrostatic Animal Guard 415

Overhead Conductor Animal Guard Cover 416

for any

Complete care

kind of cable

387

3M™ Heat Shrinkable Splice Jacket Kits HSJ Series

PHONE 800-245-3573

Splice Rejacketing

When jacketed concentric neutral cable (JCN) is spliced,

it is necessary to cover the junction between the cable jackets

with a water resistant rejacket. 3M offers three designs for

splice rejacketing: cold shrink one piece sleeve, cold shrink

stacked sleeve, and heat shrink adhesive-lined sleeves.

3M™ Cold Shrink Splice Jacket Kits

SJ-1A, SJ-2A, SJ-3A

Cold shrink jacket kits offer advanced, one-piece, water-

tight rejacketing for JCN cable splices. Designed as an

accessory kit to re-jacket over molded rubber splices,

the SJ Series is made from durable EPDM rubber.

3M Cold Shrink jacket kits SJ-1A, SJ-2A and SJ-3A offer

advanced, one-piece, water-tight rejacketing for JCN

shielded power cable splices. The SJ series accommodates

voltage classications of 15 kV, 25 kV and 35 kV.

In addition to the open-ended, tubular rubber sleeve,

each kit includes Scotch® Rubber Mastic Tape, which is

used to adjust cable O.D. and provide a sure, long-lasting

seal between the cable jacket and the cold shrink sleeve,

as well as sealing around the cable ground conductor.

This unique, cold shrink rejacketing kit eliminates the need

for dangerous torches or special tooling.

Each kit jackets one splice.

3M™ Cold Shrink SJ-SS Series Stacked

Sleeve Splice Jacket Kits SJ-1SS,

SJ-2SS, SJ-3SS

Cold Shrink Jacket Kits SJ-1SS, SJ-2SS and SJ-3SS are

two-piece, water tight rejacketing kits for JCN cables.

Designed to rejacket molded rubber splices, the SJ-SS

Series kits are made of EPDM rubber. This unique two-

piece design allows the two tubes to “stack" on top of

each other during installation, requiring less space in the

manhole or ditch to make the splice. Each kit contains

one small cold shrink tube, one large cold shrink tube, one

prole bushing and one roll of Scotch® Mastic Tape 2228.

SJ-1SSR and SJ-2SSR are specially sized for repair splices.

Each kit jackets one splice.

3M™ Cold Shrink Foldback

Splice Jacket Kits SJ-FB

3M Cold Shrink Foldback Splice Jacket Kits SJ-FB Series

are a series of folded back, tubular rubber sleeves that

combined with Scotch® Rubber Mastic Tape 2228 provide

a sealed jacket over cable splices installed on jacketed

power cable. These kits are similar to the FB tubes in the

3M Cold Shrink QS III splice kits.

The Scotch Rubber Mastic Tape 2228 provides for an

assured sealing interface between the cable jacket and Cold

Shrink Foldback Jacket Tube. Mastic strips are also used

to seal around the optional, external ground conductor.

The jacketing tube is made from EPDM rubber that contains

no chlorides or sulfurs. The completed jacket tube will be

continuous from cable jacket to cable jacket, with no seams.

Four kit sizes cover an application range from 4 AWG,

15 kV to sizes larger than 4/0 AWG, 35 kV.

3M™ Heat Shrinkable Splice Jacket Kits

HSJ Series

HSJ Series Heat Shrinkable Splice Jackets are adhesive

lined for water-tight rejacketing of JCN cable splices.

Each kit covers one splice.

3M™ Cold Shrink SJ-SS Series Stacked Sleeve Splice Jacket Kits SJ-1SS,

SJ-2SS, SJ-3SS

388

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • Splice Rejacketing

Applications:

To jacket inline splices installed on JCN cable and •

other jacketed power cables with continuous operating

temperature of up to 105º C and an emergency overload

temperature rating up to 140º C

For use in indoor or outdoor installations including direct •

burial, aerial, and submersible applications

Physical protection and moisture sealing of inline •

splices installed on shielded power cables having a solid

dielectric insulation

Speciﬁcations and Ordering Information for 3M™ Splice Jacket Kits

Splice Kit Product No.

Product

Number

UPC

(054007-)

Sleeve

Length

Expanded

Sleeve I.D.

Min. Cable

Jacket O.D.

Max. Cable

Splice O.D.

Max. Cable

Jacket Opening 15 kV 25 kV 35 kV

Case

Qty.

3M COLD SHRINK SJ SERIES JACKET KITS FOR 15 KV, 25 KV AND 35 KV

SJ-1A 69742 28"

(711,2 mm)

2.7"

(68,5 mm)

0.95"

(24,1 mm)

2.4"

(61,0 mm)

20"

(508 mm)

5411

5411A

5411R*

5412

— — 6

SJ-2A 69743 36"

(914,4 mm)

3.7"

(93,9 mm)

1.15"

(29,2 mm)

3.3"

(83,8 mm)

28"

(711 mm)

5403

5404

5405

5406

5420

5421

5422

5451

5451A

5452

5432

5461

SJ-3A 69744 38"

(965,2 mm)

4.3"

(109,2 mm)

1.55"

(39,4 mm)

4.0"

(101,6 mm)

30"

(762 mm)

5407

5408

5409

5423

5424

5425

5426

5433 6

3M COLD SHRINK SJ-FB SERIES JACKET KITS FOR 15 KV, 25 KV AND 35 KV

SJ-1FB 55302 — — 0.95"

(24,1 mm)

2.00"

(50,8 mm)

25"

(63,5 mm)

5411

5411A

5412

— — 6

SJ-2FB 55303 — — 1.15"

(29,2 mm)

3.00"

(76,2 mm)

31"

(78,7 mm)

5403

5404

5405

5406

5420

5421

5422

5451

5451A

5452

5432

5461

SJ-3FB 55304 — — 1.55"

(39,4 mm)

3.62"

(91,9 mm)

34"

(86,4 mm)

5407

5408

5409

5423

5424

5425

5426

5433 6

SJ-4FB 55305 — — 1.75"

(44,5 mm)

4.10"

(104,1 mm)

32"

(81 mm)

— — — 6

Note: The above dimensions should be used to determine sizing for non-3M splices.

3M COLD SHRINK SJ-SS SERIES COLD SHRINK STACKED SLEEVE KITS FOR 15 KV, 25 KV AND 35 KV

SJ-1SS 50777 15"

(381,0 mm)

18"

(457,2 mm)

2.4"

(60,9 mm)

3.1"

(78,7 mm)

0.95"

(24,1 mm)

2.4"

(61,0 mm)

23"

(584 mm)

5411

5411A

5412

— — 6

*3M 5411R QS-II requires an additional 8428-12 Cold Shrink tube to jacket the splice. The procedure for jacketing the 5411R QS-II is detailed in the SJ-1A kit

installation instructions.

Jacketed Concentric Neutral Cable (JCN)

389 PHONE 800-245-3573

Speciﬁcations and Ordering Information for 3M™ Splice Jacket Kits

Splice Kit Product No.

Product

Number

UPC

(054007-)

Sleeve

Length

Expanded

Sleeve I.D.

Min. Cable

Jacket O.D.

Max. Cable

Splice O.D.

Max. Cable

Jacket Opening 15 kV 25 kV 35 kV

Case

Qty.

SJ-2SS 50778 19"

(482,6 mm)

24"

(609,6 mm)

3.1"

(78,7 mm)

3.7"

(93,9 mm)

1.15"

(29,2 mm)

3.3"

(83,8 mm)

31"

(787 mm)

5403

5404

5405

5406

5420

5421

5422

5451

5451A

5452

5432

5461

SJ-3SS 50779 22"

(558,8 mm)

25"

(635,0 mm)

3.7"

(93,9 mm)

4.3"

(109,2 mm)

1.55"

(39,4 mm)

4.0"

(101,6 mm)

35"

(889 mm)

5407

5408

5409

5423

5424

5425

5426

5433 6

3M COLD SHRINK STACKED SLEEVE REPAIR JACKET KITS FOR 15 KV

SJ-1SSR 41956 — — 0.95"

(25 mm)

1.95"

(49,5 mm)

29"

(737 mm)

5411R — — 6

SJ-2SSR 41957 — — 1.15"

(29,2 mm)

3.00"

(76,2 mm)

37"

(940 mm)

5412R

5451R

— — 6

3M HSJ SERIES HEAT SHRINKABLE SPLICE JACKETS FOR 15 KV, 25 KV AND 35 KV

HSJ-1 09270 33"

(84 mm)

2.5"

(64 mm)

0.85"

(21,6 mm)

1.9"

(48,3 mm)

22"

(559 mm)

5411

5411A

5411R

5412

— — 10

HSJ-2 09271 40"

(102 mm)

3.0"

(76 mm)

1.00"

(25,4 mm)

2.6"

(66,0 mm)

28"

(711 mm)

5403

5404

5405

5406

5412R

5420

5421

5422

5451

5451A

5451R

5452

5432

5461

HSJ-3 09272 40"

(102 mm)

4.3"

(109 mm)

1.50"

(38,1 mm)

3.4"

(86,4 mm)

28"

(711 mm)

5407

5408

5409

5423

5424

5425

25426

5433 5

*3M 5411R QS-II requires an additional 8428-12 Cold Shrink tube to jacket the splice. The procedure for jacketing the 5411R QS-II is detailed in the SJ-1A kit

installation instructions.

Kit Contents for 3M Splice Jacket Kits

Product Number SJ-1A SJ-2A SJ-3A SJ-1SS SJ-2SS SJ-3SS HSJ-1 HSJ-2 HSJ-3

Cable Type Jacketed Concentric Neutral Cable (JCN)

See page 385 for cable type illustration.

Each kit jackets one splice

Cold Shrink Jacketing Heat Shrink Jacketing

Cold Shrink Tube 1 1 1 2 2 2 — — —

Scotch® Rubber Mastic

Tape 2228

1 1 1 1 1 1 — — —

Heat Shrink Tube — — — — — — 1 1 1

Proﬁle Bushing — — — 1 1 1 — — —

Instructions 1 1 1 1 1 1 1 1 1

390

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • Splice Repair

Splice Repair

3M™ HDCW Wraparound

Heat Shrink Cable Repair Sleeves

3M HDCW Heat Shrink Wraparound Cable Repair Sleeves

are designed to quickly repair damaged cable jacketing.

They may also be used to rejacket in-line splices. 3M

HDCW wrap sleeves can be used as insulation material

on cable and splices up to 1000 volts and as jacket repair

material on cable up to 35 kV. The design of the wrap

sleeve allows it to be installed in tight spaces with ordinary

heating equipment such as a torch.

The 3M HDCW cable repair is made from modied

cross-linked polyolen, with a hot-melt adhesive liner

on the inner side of the sleeve. Upon heating, the sleeve

shrinks and the adhesive melts, creating a water-tight bond

between the sleeve and the cable. 3M HDCW Wraparound

Cable Repair Sleeves meet ANSI C119.1 requirements.

A corrosion proof metal channel is used to close the

sleeve during installation.

3M HDCW wrap sleeves are stocked in four lengths and

ve diameters. Other cut lengths are available upon request.

Application Guide and Ordering Information for

3M HDCW Wraparound Heat Shrink Cable Repair Sleeves

Sleeve Dimensions

Part Number

UPC

(051138-)

Length

in. (mm)

600/1000V

Conductor Size

(AWG or MCM)

Jacket Repair

Use Range

Max./Min.

in. (mm)

Expanded

Diameter

in. (mm)

Reserved

Diameter

in. (mm)

HDCW 35/10-250

HDCW 35/10-1200

48416

48436

9.8" (250 mm)

47.2" (1200 mm)

#8-2/0

1.38-0.39" (35-10 mm)

1.97" (50 mm)

0.32" (8 mm)

HDCW 55/15-500

HDCW 55/15-1200

48421

48437

19.7" (500 mm)

47.2" (1200 mm)

3/0-400

2.17-0.59" (55-15 mm)

2.95" (75 mm)

0.51" (13 mm)

HDCW 80/25-750

HDCW 80/25-1200

48426

48438

29.5" (750 mm)

47.2" (1200 mm)

500-1000

3.15-0.98" (80-25 mm)

3.94" (100 mm)

0.91" (23 mm)

HDCW 110/30-1000

HDCW 110/30-1200

48431

48439

39.4" (1000 mm)

47.2" (1200 mm)

1000-2000

4.33-1.18" (110-30 mm)

5.20" (132 mm)

0.98" (25 mm)

HDCW 140/40-1000

HDCW 140/40-1200

48435

48440

39.4" (1000 mm)

47.2" (1200 mm)

N/A

5.39-1.38" (137-35 mm)

5.71" (145 mm)

1.26" (32 mm)

391 PHONE 800-245-3573

3M™ Safety Sock

Grounding Kits, Shielded

and Jacketed URD Cable

For use on tape or wire shield and jacketed concentric

neutral (JCN) cables. Provides continuity of the cable shield

system and a path to ground in the event of a dig-in.

Ordering Notes:

Each kit contains shielding for one splice•

Use the shield diameter range as nal ordering criteria•

A rejacketing sleeve, such as the 3M Ground Kits •

SJ Series, must be applied over shielding

Kit contents: copper screen sleeve, mastic seal strips, •

constant-force springs, instructions

Speciﬁcations and Ordering Information for 3M™ Safety Sock Series Grounding Kits

Product Number

UPC

(051141-) Cable Size Shield Diameter Range Case Qty.

SS-A 40745 —0.47-0.78"

(12-20 mm)

—

SS-1 15555 #2-3/0 0.78-1.47"

(20-37 mm)

SS-2 15561 #4/0-500 kcmil 1.0-2.20"

(25-56 mm)

SS-3 15557 500-1250 Kcmil 1.5-2.93"

(38-74 mm)

SS-4 40455 —1.77-4.21"

(45-107 mm)

—

These kits are available in Canada only.

392

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • 3M™ Safety Sock Grounding Kits, Shielded and Jacketed URD Cable

3M™ Scotchcast™ Jacket

Repair Kits M Series

Scotchcast Jacket Repair Kits M Series contain a reusable

wrap-around mold and accessory materials needed to make

10 permanent, exible and moisture-resistant jacket repairs

or splices of portable cable. The kit contains a wrap around

mold that permits jacket repair without cutting through the

cable. When used with 3M Scotchcast Resin 2130, M series

kits provide durable, exible jacket repair. Scotchcast kits

can be used with portable power cable or standard cable.

Note: Scotchcast ame-retardant compound 2130 needed

to jacket the repair or splice is not included and must

be ordered separately. U.S. Mine Safety and Health

Administration acceptance No. P-142-5 MSHA.

Speciﬁcations and Ordering Information for

3M Scotchcast Jacket Repair Kits M Series

Product Number M-20 M-30 M-40

Cable Diameter Range 1.60-2.5"

(41-64 mm)

1.85-4.0"

(47-102 mm)

1.85-6.0"

(47-152 mm)

Maximum Repair Length 13-15"

(33-38 cm)

20"

(51 cm)

32"

(81 cm)

Ordering Information

UPC (054007-) 31392 31393 31394

Case Qty. 1 kit 1 kit 1 kit

3M™ Scotchcast™ Jacket Repair Kits M Series

about

It’s all

quality control

393

Note: Elbow not included.

PHONE 800-245-3573

Sealing and Grounding

3M™ Cold Shrink Cable Accessory Sealing Kits 8450

Series are designed to seal the end of JCN cable. Use these

kits when installing elbows or other cable accessories that

do not include a jacket seal. 3M also offers three types of

sheath sealing or breakout kits; poured resin, cold shrink

and heat shrink, several heat shrink cable sealing end caps

and a variety of grounding hardware.

3M™ Cold Shrink Cable Accessory

Sealing Kits 8450 Series

The 3M Cold Shrink Cable Accessory Sealing Kits 8450

Series are designed to seal the jacket end of power cables

where elbows or other cable accessories are installed. Both

the sealing tube and mastic are compatible with commonly

used power cable jacketing and semiconductive materials.

Speciﬁcations and Ordering Information for

3M Cold Shrink Cable Accessory Sealing Kits 8450 Series

Product Number 8452 8452L 8453 8454

CABLE TYPE Jacketed Concentric Neutral Cable (JCN)

See above for cable type illustration.

CABLE SIZE/VOLT CLASS:

Cable Size for 15 kV Class 2-4/0 AWG

(35-100 mm2)

2-4/0 AWG

(35-100 mm2)

2/0 AWG-1000 kcmil

(70-500 mm2)

750-1500 kcmil

(380-725 mm2)

Cable Size for 25 kV Class 2-2/0 AWG

(35-50 mm2)

2-2/0 AWG

(35-50 mm2)

1/0 AWG-750 kcmil

(60-380 mm2)

600-1250 kcmil

(325-625 mm2)

Cable Size for 35 kV Class 1/0 AWG

(60 mm2)

1/0 AWG

(60 mm2)

1/0 AWG-500 kcmil

(60-250 mm2)

350-1000 kcmil

(180-500 mm2)

Minimum Seal Diameter 0.95" (24 mm) 0.95" (24 mm) 1.28" (33 mm) 1.60" (41 mm)

Maximum Installed Diameter 1.94" (49 mm) 1.94" (49 mm) 2.67" (68 mm) 3.50" (89 mm)

KIT COMPONENTS:

Cold Shrink Sealing Tube 11 (1/2" longer) 1 1

Mastic Sealing Strips

6" (152,4 mm)

3 strips 3 strips 4 strips 6 strips

Instructions 1111

Ordering Information

UPC (054007-) 08336 44312 09676 49938

Inner Unit Pack 1/bag —1/bag —

Case Qty. 10 kits 10 kits 10 kits 10 kits

Jacketed Concentric Neutral Cable (JCN)

394

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • Sealing and Grounding

3M™ Cold Shrink Shield Adapter Kits

8459/8460 Series

3M Cold Shrink Shield Adapter Kits are designed for

grounding and sealing tape, wire and UniShield shielded

power cables when using cable accessories such as elbows,

modular splices and terminations.

These cold shrink kits require no heat, special tools or

special skills to install. The cold shrink kits come complete

with all necessary components (except the cable accessory)

and are installed in a few simple steps. We’ve even attached

a “bleeder wire” to the ground strap eliminating the need

for additional wire and connectors.

Speciﬁcations and Ordering Information for

3M Cold Shrink Shield Adapter Kits 8459/8460 Series

Product Number 8459 8460 8461 8462

CABLE TYPE Tape Shielded, Wire Shielded, Unishield®

See above for cable type illustration.

JACKET O.D. RANGE

Inches (mm) 0.59-1.05

(15,0-26,6)

0.83-1.64

(21,1-41,6)

1.27-2.17

(32,3-55,1)

1.70-2.60

(43,2-66,0)

CABLE SIZE/VOLT CLASS:

Cable Size for 5/8 kV Class 8-1 kcmil

(10-38 mm2)

1/0 AWG-350 kcmil

(50-200 mm2)

500-1000 kcmil

(240-500 mm2)

—

Cable Size for 15 kV Class —2-250 kcmil

(35-150 mm2)

350-1000 kcmil

(185-500 mm2)

1250-1750 kcmil

(600-850 mm2)

Cable Size for 25 kV Class —2-250 kcmil

(35-150 mm2)

350-750 kcmil

(185-500 mm2)

1000-1500 kcmil

(600-725 mm2)

Cable Size for 35 kV Class —2-1/0 kcmil

(35-60 mm2)

2/0 AWG-350 kcmil

(70-200 mm2)

500-1000 kcmil

(240-500 mm2)

KIT COMPONENTS:

Cold Shrink Sealing Tube 1 1 1 1

Mastic Sealing Strips 6"

(152,4 mm)

3 strips 3 strips 3 strips 3 strips

Constant Force Spring 1 1 1 1

Preformed Ground Braid/

Bleeder Wire

1 1 1 1

Scotch® 13

Semi-Conductive Tape

1 strip 1 strip 1 strip 1 strip

Instructions 1 1 1 1

Ordering Information

UPC (054007-) 53236* 41458 41459 53131*

Inner Unit Pack 1/bag 1/bag 1/bag 1/bag

Case Qty. 3 kits 3 kits 3 kits 3 kits

* UPC 051128-

Tape Shielded

Wire Shielded

UniShield®

395 PHONE 800-245-3573

3/C Cable Breakout

Boots and 3/C Phase

Rejacketing System

3M™ Cold Shrink Silicone Rubber 3/C Cable Breakout

Boots 8560 Series and 3M Silicone Rubber RJS Series

3/C Phase Rejacketing Systems are designed to be used

in conjunction with 3M terminations, to seal the breakout

area and rejacket the phases on three conductor cable

without grounds.

3M™ Cold Shrink Silicone Rubber 3/C

Cable Breakout Boots 8560 Series

3M Silicone Cold Shrink Cable Breakout Boots 8561

through 8565 are a series of open-ended molded rubber

sealing assemblies that are factory expanded and mounted

on removable inner-supporting plastic cores. They are

supplied for eld installation in a pre-stretched condition.

The supporting cores are removed after the seal has been

positioned for installation around the breakout area of a

three conductor cable. Core removal allows the silicone

rubber boot to shrink down to a predetermined diameter,

creating an environmental enclosure for individual cable

phase legs and the overall cable jacket.

3M Breakout Boots 8560 Series are designed to protect the

phase leg breakout of 3/C medium voltage power cable from

exposure to moisture, contamination, corrosion, ozone,

ultra-violet radiation, physical contact and other hazards

associated with 3/C termination operating environments.

3M Breakout Boots 8560 Series can be used in conjunction

with 3M Silicone Rubber Cold Shrink Rejacketing Sleeves

for 3/C shielded power cable terminating applications.

3M™ QT-III Silicone Rubber

Features and Beneﬁts:

Versatile; installs quickly and accommodates •

a wide range of cable sizes

Simple hand application; no need for special •

installation tools

No torches or heat required•

No specic user skills or craftsmanship required•

Excellent resistance to ozone and ultra-violet radiation•

High dry and wet insulation resistance•

Highly exible; accommodates all power cable supplier •

bend radius recommendations

Seals tight; retains resiliency and pressure even after •

prolonged years of aging and exposure

Compatible with all 3M Cold Shrink Termination •

Products and RJS Series Phase Rejacketing Sleeves

396

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • 3/C Cable Breakout Boots and 3/C Phase Rejacketing System

3M™ 3/C Phase Rejacketing System

3M RJS Series Rejacketing Sleeves are designed so that

3M Cold Shrink QT-III and Q-TIII Silicone Rubber

Terminations can be used on 3/C (three conductor) medium

voltage shielded power cables of tape shield, wire shield,

armored and non-armored congurations. RJS Rejacketing

Assemblies are a series of silicone rubber insulators

incorporating an inner-expandable polyester braid designed

to reduce sliding friction and deliver the insulator onto the

cable. Rejacketing sleeves are designed to protect the phase

legs (core) of 3/C shielded power cable from exposure to

moisture, corrosion, ozone, ultra-violet radiation, physical

contact and other hazards associated with termination

operating environments. Rejacketing sleeves are designed

to be used in conjunction with 3M Cold Shrink Breakout

Boots and Silicone Rubber Terminations.

Features and Beneﬁts:

Versatile; installs quickly and accommodates •

a wide range of cable sizes

Simple hand application; no need for special •

installation tools

No torches or heat required•

No specic user skills or craftsmanship required•

Excellent resistance to ozone and ultra-violet radiation•

High dry and wet insulation resistance•

Excellent shelf life•

Easy-to-adjust sleeve length; adapts to variable •

equipment connection and mounting requirements

Compatible with 3M Cold Shrink PST Breakout Boots •

and Termination Products

3M™ Cold Shrink Silicone Rubber 3/C Cable Breakout Boots 8560 Series

Product

Number

UPC

(054007-)

Cable Phase Shield

Diameter Range

mm (in.)

Cable Outer Jacket

Diameter Range

mm (in.) Inner Unit Pack Case Qty.

8561 43143 12.2-18.3 mm (0.48-0.72") 29.7-49.3 mm (1.17-1.94") —1/box

8562 43144 15.5-24.2 mm (0.61-0.95") 37.1-67.8 mm (1.46-2.67") —1/box

8563 43145 20.8-30.0 mm (0.82-1.18") 48.8-78.7 mm (1.92-3.10") —1/box

8564 43146 26.0-41.1 mm (1.02-1.63") 64.0-109.8 mm (2.52-4.32") —1/box

8565 43147 27.7-49.3 mm (1.09-1.94") 66.1-119.4 mm (2.60-4.70") —1/box

8566 57174* 29.8-47.9 mm (1.17-1.89") 80.7-140.2 mm (3.18-5.52") —1/box

* UPC preﬁx 051128-

3M™ 3/C Phase Rejacketing Sleeve Selection Guide—Based on Diameter Range

and Cable Conductor Size

Product

Number

UPC

(054007-)

Size

(feet)

Metallic Shield

Diameter Range

mm (in.)

3.3 kV

(mm)

IEC

3.3 kV

(mm)

JIS

5.0 kV

(AWG)

AEIC

6.6 kV

(mm)

IEC

6.6 kV

(mm)

JIS

8.0 kV

(AWG)

(AEIC

Inner

Unit

Pack

Case

Qty.

RJS-1-4FT 43098 4' 10.9-15.2 mm (0.43-0.60") 16-35 8-22 8-2 16-25 8-10 6-4 —10

RJS-1-1FT 43099 10' 10.9-15.2 mm (0.43-0.60") 16-35 8-22 8-2 16-25 8-10 6-4 — 1

RJS-2-4FT 43100 4' 15.2-20.3 mm (0.60-0.80") 50-95 38-60 1-3/0 35-70 14-38 2-2/0 —10

RJS-2-10FT 43101 10' 15.2-20.3 mm (0.60-0.80") 50-95 38-60 1-3/0 35-70 14-38 2-2/0 — 1

RJS-3-4FT 43102 4' 20.3-26.0 mm (0.80-1.02") 120-185 100-150 4/0-400 95-150 60-100 3/0-350 —10

RJS-3-10FT 43103 10' 20.3-26.0 mm (0.80-1.02") 120-185 100-150 4/0-400 95-150 60-100 3/0-350 — 1

RJS-4-4FT 43104 4' 25.9-32.4 mm (1.02-1.28") 240-300 200-250 500-750 185-300 150-250 400-600 —10

RJS-4-10-FT 43105 10' 25.9-32.4 mm (1.02-1.28") 240-300 200-250 500-750 185-300 150-250 400-600 — 1

RJS-5-4FT 43106 4' 32.5-41.1 mm (1.28-1.62") —300-325 800-1000 —300-325 750-1000 —10

RJS-5-10FT 43107 10' 32.5-41.1 mm (1.28-1.62") —300-325 800-1000 —300-325 750-1000 — 1

397 PHONE 800-245-3573

3M™ 3/C Phase Rejacketing Sleeve Selection Guide—Based on Diameter Range

and Cable Conductor Size

Product

Number

UPC

(054007-)

Size

(feet)

Metallic Shield

Diameter Range

mm (in.)

10 kV

(mm)

IEC

15 kV

(AWG)

AEIC

20 kV

(mm)

IEC

25 kV

(AWG)

AEIC

30 kV

(mm)

IEC

35 kV

(AWG)

AEIC

Inner

Unit

Pack

Case

Qty.

RJS-1-4FT 43098 4' 10.9-15.2 mm (0.43-0.60") ———————10

RJS-1-1FT 43099 10' 10.9-15.2 mm (0.43-0.60") — — — — — — — 1

RJS-2-4FT 43100 4' 15.2-20.3 mm (0.60-0.80") 10-50 2-1 — — — — — 10

RJS-2-10FT 43101 10' 15.2-20.3 mm (0.60-0.80") 10-50 2-1 — — — — — 1

RJS-3-4FT 43102 4' 20.3-26.0 mm (0.80-1.02") 70-150 1/0-4/0 25-70 2-1/0 — — — 10

RJS-3-10FT 43103 10' 20.3-26.0 mm (0.80-1.02") 70-150 1/0-4/0 25-70 2-1/0 — — — 1

RJS-4-4FT 43104 4' 25.9-32.4 mm (1.02-1.28") 185-300 250-450 95-185 2/0-250 35-70 1/0-3/0 —10

RJS-4-10FT 43105 10' 25.9-32.4 mm (1.02-1.28") 185-300 250-450 95-185 2/0-250 35-70 1/0-3/0 — 1

RJS-5-4FT 43106 4' 32.5-41.1 mm (1.28-1.62") —500-750 240-300 300-500 95-240 4/0-500 —10

RJS-5-10FT 43107 10' 32.5-41.1 mm (1.28-1.62") —500-750 240-300 300-500 95-240 4/0-500 — 1

3M™ 3/C Phase Rejacketing Kits

RJK Kits for Converting 3/C Cable to Three 1/C Cables

Indoor/

Outdoor

Kits Indoor Kits

Cable Metallic Shield

Diameter Range 5 kV 8 kV 15 kV 25/28 kV

RJK-1 RJS-2/3 0.60-0.80 1-3/0 2-2/0 1-2/0

RJK-2 RJS-3/3 0.80-1.02 4/0-400 3/0-30 1/0-4/0 2-1/0

RJK-3 RJS-4/3 1.02-1.28 500-750 400-600 250-450 2/0-250

RJK-4 RJS-5/3 1.28-1.62 800-1000 750-1000 500-750 300-500

Kit Contents

3M Cold Shrink breakout boot, 3M Cold Slip rejacketing •

sleeves (3 four-foot lengths), provision to externally

ground at breakout boot

3M Cold Slip rejacketing sleeves (3 four-foot lengths)•

Cold Shrink

3M Cold Shrink splicing products are designed using 3M’s

unique cold shrink delivery system. Products are supplied

pre-stretched on a removable core for efciency and ease

of installation. All splices are pre-tested in the factory.

Cold Slip

3M Cold slip re-jacketing sleeves incorporate an inner-

expandable polyester braid designed to reduce sliding

friction and deliver the sleeve quickly onto the cable.

398

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • 3/C Cable Breakout Boots and 3/C Phase Rejacketing System

3M™ Sheath Seal Kits for

Multiconductor Cable

3M offers three types of sheath sealing or breakout kits:

poured resin, cold shrink and heat shrink. 3M offers two

types of heat shrink cable sealing, caps and a variety

of grounding hardware.

3M™ Sheath Seal Kits 5831 and 5832

3M Sheath Seal Kits 5831 and 5832 are designed to seal

the sheath area for multiconductor cables with or without

ground wires. They will handle copper or aluminum

cables from #2 AWG through 500 kcmil (35-250 mm2).

For kit contents and sizing, see chart below. Each kit

makes one seal.

3M™ Cold Shrink Sheath

Seal Kits 5841 and 5842

3M Cold Shrink Sheath Seal Kits 5841 and 5842 are

designed to seal the sheath area for three conductor

cables without ground wires. They will handle copper or

aluminum cable from #2 AWG through 500 kcmil (35-

250 mm2). No heat is required when using these kits. For

kit contents and sizing, see chart below. Each kit makes

one seal.

3M™ Sheath Seal Kits 5831 and 5832

3M™ Cold Shrink Sheath Seal Kits 5841 and 5842

Speciﬁcations for 3M Sheath Seal Kits

Speciﬁcations 5831 5832 5841 5842

Conductor Size 2-3/0 AWG

(35-80 mm2)

4/0 AWG-500 kcmil

(120-250 mm2)

2-4/0 AWG

(35-100 mm2)

4/0 AWG-500 kcmil

(120-250 mm2)

Maximum Jacket or Armor O.D. Range 2.6"

(66 mm)

3.75"

(95,2 mm)

— —

Conductor Insulation O.D. Range N/A N/A 0.30-1.18"

(8-30 mm)

0.77-1.38"

(20-35 mm)

Cable Jacket Range — — 1.20-1.90"

(30-48 mm)

1.80-3.10"

(46-79 mm)

KIT COMPONENTS:

Molded Sheath Seal Body — — 1 1

Wraparound Mold Body 1 1 — —

3M™ ScotchCast™ 2130 1 1 — —

Abrasive Cloth 1 1 — —

Scotch® Vinyl Electrical Tape Super 33+ 1 1 — —

Scotch® Linerless Rubber Splice Tape 130C 1 1 — —

3M Scotchﬁl™ Electrical Insulation Putty 1 1 — —

Instructions 1111

Note: Each kit makes one seal.

Ordering Information for 3M Sheath Seal Kits

Ordering Information 5831 5832 5841 5842

UPC (054007-) 12280 12281 12291 12292

Case Qty. 1 kit 1 kit 1 kit 1 kit

The ﬁnal determining factor for the 5831 and 5832 is the conductor insulation O.D. and the cable jacket O.D.

The ﬁnal determining factor for the 5841 and 5842 is the maximum jacket or armor diameter.

Note: Each kit makes one seal.

399 PHONE 800-245-3573

3M™ Heat Shrinkable Cable

Breakout Boots

3M Heat Shrinkable HDBB Cable Breakout Boots are

designed for dependable insulating and sealing of cable

breakouts in multiconductor armored or sheathed cables

and conduit ends. 3M HDBB boots are made from ame

retardant, cross-linked polyolen and meet the material

requirements of MIL-I-81765-1. The boots are designed

to provide excellent electrical and mechanical protection

and are supplied with an internal coating of adhesive for

reliable environmental sealing.

3M™ Heat Shrinkable Cable Breakout Boots

Speciﬁcations and Ordering Information for

3M™ Heat Shrinkable Cable Breakout Boots

Product Number Cross Section UPC (054007-)

Cable Entry End

(Max. to Min.)

Conductor Legs

(Max. to Min.)

Case

Qty.

HDBB-205-1-250 58793 0.80-0.37"

(20,32-9,40 mm)

0.33-0.11"

(8,38-2,79 mm)

1 each

HDBB-210-1-250 35992* 1.20-0.60"

(30,38-15,24 mm)

0.50-0.17"

(12,70-4,32 mm)

1 each

HDBB-220-1-250 46654** 1.90-0.90"

(48,26-22,86 mm)

0.75-0.30"

(19,05-7,62 mm)

1 each

HDBB-230-1-250 35993* 3.00-1.50"

(76,20-38,10 mm)

1.45-0.50"

(38,10-12,70 mm)

1 each

HDBB-310-1-250 35994* 0.90-0.36"

(2,86-9,14 mm)

0.33-0.12"

(8,38-3,05 mm)

1 each

HDBB-320-1-250 35995* 1.20-0.50"

(30,38-12,70 mm)

0.50-0.16"

(12,70-4,06 mm)

1 each

HDBB-321-1-250 35996* 1,50-0.69"

(38,10-17,53 mm)

0.65-0.18"

(16,51-4,57 mm)

1 each

HDBB-325-1-250 35997* 1.70-0.90"

(43,18-22,86 mm)

0.82-0.30"

(20,83-7,62 mm)

1 each

HDBB-335-1-250 03409* 2.40-1.40"

(60,96-35,56 mm)

1.25-0.50"

(31,75-12,70 mm)

1 each

HDBB-340-1-250 35998* 3.20-2.00"

(81,28-50,80 mm)

1.45-0.75"

(38,10-19,05 mm)

1 each

HDBB-345-1-250 58794 4.90-2.32"

(124,46-5,93 mm)

2.00-1.00"

(50,80-25,40 mm)

1 each

*UPC preﬁx 051135-

**UPC preﬁx 051138-

Note: 3M Breakout Boots are ﬂame retardant and supplied with a factory-applied sealant. Unlined boots are available on special order. All boots are black in color.

Standard package is one and multiples of one.

400

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • 3/C Cable Breakout Boots and 3/C Phase Rejacketing System

Speciﬁcations and Ordering Information for

3M™ Heat Shrinkable Cable Breakout Boots

Product Number Cross Section UPC (054007-)

Cable Entry End

(Max. to Min.)

Conductor Legs

(Max. to Min.)

Case

Qty.

HDBB-405-1-250 58795 0.90-0.43"

(22,86-10,92 mm)

0.28-0.11"

(7,11-2,79 mm)

1 each

HDBB-410-1-250 35999* 1.25-0.80"

(31,75-20,32 mm)

0.50-0.19"

(1,70-4,83 mm)

1 each

HDBB-415-1-250 58855 1.75-0.98"

(43,18-24,89 mm)

0.79-0.28"

(20,07-7,11 mm)

1 each

HDBB-420-1-250 36000* 2.35-1.00"

(59,69-2,4 mm)

1.00-0.35"

(25,40-8,89 mm)

1 each

HDBB-425-1-250 58797 2.65-1.40"

(67,31-35,56 mm)

1.20-0.53"

(30,48-13,46 mm)

1 each

HDBB-430-1-250 58798 5.25-3.00"

(133,35-76,20 mm)

1.35-0.55"

(34,29-13,97 mm)

1 each

HDBB-505-1-250 46648** 2.36-0.96"

(59,94-24,38 mm)

1.18-0.29"

(70,73-7,36 mm)

1 each

HDBB-605-1-250 36001* 2.39-1.45"

(60,71-38,10 mm)

0.80-0.35"

(20,32-8,89 mm)

1 each

*UPC preﬁx 051135-

**UPC preﬁx 051138-

Note: 3M Breakout Boots are ﬂame retardant and supplied with a factory-applied sealant. Unlined boots are available on special order. All boots are black in color.

Standard package is one and multiples of one.

PRODUCT REFERRAL GENERATOR

Insulating ......................................................................... pg. 418

– Heat Shrinkable Tubing

Sealing

– Cold Shrink End Caps ............................................... pg. 401

401 PHONE 800-245-3573

3M™ Cold Shrink End Caps EC-Series

The 3M Cold Shrink End Caps EC-Series are designed

to environmentally seal and mechanically protect exposed

cable ends using no tools, mastics or tapes. Regardless of

the cable type or manufacturer, it takes only four different

end-caps to t cable size ranges from 1.46" to 3.32"

(11,6-84,3 mm), reducing the need for additional inventory

to cover all cable sizes. The 3M Cold Shrink End Caps

EC-Series protects cables, pipes and other cylindrical

objects from exposure to moisture, contamination,

corrosion, ozone, ultra-violet radiation, physical contact

and other environmental hazards.

3M™ Heavy-Duty End Caps SKE

3M Heat Shrinkable End Caps are typically used to

seal cable ends and are designed to provide moisture,

mechanical and environmental protection. 3M SKE

end caps are for heavy-duty applications.

3M SKE end caps are manufactured from semi-rigid ame

retardant, cross-linked polyolen. They are supplied with

a factory applied adhesive lining for reliable environmental

sealing. Six different sizes accommodate a broad range

of cable diameters.

Standard Color: Black.

Speciﬁcations and Ordering Information for 3M Cold Shrink End Caps EC-Series

Product Number UPC (051138-)

Use Range

Inches (mm) Inner Unit Pack

EC-1 52440 0.46-0.82" (11,6-20,9 mm) 10/box

EC-2 52441 0.63-1.18" (15,9-30,1 mm) 10/box

EC-3 52442 1.02-1.94" (26,0-49,2 mm) 10/box

EC-4 52443 1.79-3.32" (45,5-84,3 mm) 10/box

Speciﬁcations and Ordering Information for 3M Heavy-Duty End Caps SKE

Product

Number

UPC

(051138-)

H Dia.

Min. X Max. R

J. Dia.

Max. R P ±10% R R ±10% R W ±20% R

For Cable

Diameter

Case

Qty.

SKE 4/10 48153 0.39 (10,0) 0.16 (4,0) 0.12 (3,0) 1.32 (33,5) 1.18 (30,0) 0.08 (2,0) 0.16-0.31

(4-8)

1000 each

SKE 8/20 48154 0.79 (20,0) 0.30 (7,5) 0.26 (6,5) 2.18 (55,3) 1.97 (50,0) 0.09 (2,3) 0.31-0.43

(8-11)

250 each

SKE 15/40 48155 1.57 (40,0) 0.59 (15,0) 0.41 (10,5) 3.54 (90,0) 3.15 (80,0) 0.12 (3,0) 0.59-1.26

(15-32)

60 each

SKE 25/63 48156 2.48 (63,0) 0.98 (25,0) 0.63 (16,0) 5.63 (143,3) 5.12 (130,0) 0.13 (3,3) 1.00-1.97

(25-50)

60 each

SKE 30/76 48157 2.99 (76,0) 1.18 (30,0) 0.67 (17,0) 6.22 (158,0) 5.91 (150,0) 0,16 (4.0) 1.18-2.36

(30-60)

40 each

SKE 45/100 48158 3.94 (100,0) 1.77 (45,0) 1.02 (26,0) 6.40 (162,5) 5.50 (140,0) 0.16 (4,0) 1.77-3.15

(45-80)

30 each

NOTES:

1. All dimensions in both inches and metric. All angles in degrees.

2. Dimensions in table: X= Expanded (Minimum); R= Recovered (Maximum)

3. Color: Black

H Dia.

J Dia.

SKE End Caps

Fully Recovered Part (After Heating)

Expanded, As Supplied, Part

402

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • 3/C Cable Breakout Boots and 3/C Phase Rejacketing System

3M™ Hi-Amp Splice Grounding

Accessory Kit SG-2 and SG-3

for 15 kV, 25 kV and 35 kV

Tape Shielded Cable

LC Shielded Cable

3M Hi-Amp Splice Grounding Accessory Kit SG-2 and

SG-3 are designed to accommodate the shielding and

grounding of inline splices made on LC, heavy-duty tape

and conventional tape shielded power cables. The SG-2

and SG-3 designs provide a fault current capacity of 15,000

Amps for 15 cycles on 15, 25 and 35 kV class cables.

The 3M kits SG-2 and SG-3 were designed to accommodate

all 3M Quick Splice bodies as well as most other rubber-

molded inline splices currently used in the electrical power

distribution industry.

The 3M copper screen sleeves SG-2 and SG-3 are applied

over molded rubber splices on cables with shield diameters

ranging from 1.25" (32,0 mm) to 2.25" (57,2 mm). In most

cases this will include conductor sizes between 350 kcmil

and 1000 kcmil and voltage classes of 15 kV through 35

kV. The 3M copper screen sleeves SG-2 and SG-3 and the

preformed ground connection braid have a capacity greater

than that of #4 AWG copper wire and are fault current rated

at 15,000 amps for 15 cycles. The 3M Kit SG-3 has a larger

CMA (greater than 2 AWG) copper screen sleeve and two

constant force springs per end. This provides additional

neutral current capacity.

Following SG-2 and SG-3 component installation, 3M

Cold Shrink SJ-1A, SJ-2A, SJ-3A, heat shrink HSJ series

or Scotch® Rubber Mastic and Vinyl Tape systems are

the recommended choices for sealing and rejacketing the

installed, shielded splice. Each kit provides shielding and

grounding for one splice.

Refer to the ordering table on page 401 for cable and

accommodation. Final determining factor, for cables not

specied, is a shield diameter range from 1.25" (32,0 mm)

minimum through 2.25" (57,2 mm) maximum.

3M™ Hi-Amp Accessory Grounding Kit

8473 for 15 kV, 25 kV and 35 kV

Tape Shielded Cable

LC Shielded Cable

3M Hi-Amp Accessory Grounding Kit 8473 is designed

to accommodate the grounding of accessories installed on

LC, heavy-duty tape and conventional tape-shielded power

cables. The 3M Grounding Kit 8473 design provides a fault

current capacity of 15,000 Amps for 15 cycles on 15 kV, 25

kV and 35 kV class cables.

Product application range for the 3M kit 8473 includes

cable sizes from 350 kcmil through 1000 kcmil in 15 kV

through 35 kV voltage classes as indicated in the table

on page 401.

The kit 8473 was designed to be used with 600-Amp

elbows and other accessories where cable jacket-to-

accessory sealing and high-ampacity grounding is desired.

The 3M Grounding Kit 8473 preformed ground braid has

a fault current capacity of 15,000 Amps for 15 cycles with

an equivalent cross-sectional area greater than #4 AWG

copper wire. Each kit provides grounding and sealing

for one accessory.

Refer to the ordering table on page 401 for cable

accommodation. Final determining factor, for cables

not specied, is a shield diameter range from 1.25"

(32,0 mm) minimum through 2.25" (57,2 mm) maximum.

403 PHONE 800-245-3573

3M™ Hi-Amp Grounding Accessory Kit

GSHA-8 QT-II for 15 kV, 25 kV and 35 kV

Tape Shielded Cable

LC Shielded Cable

3M Hi-Amp Grounding Accessory Kit GSHA-8 QT II

is designed to accommodate the grounding of terminations

made on LC, heavy-duty tape and conventional tape-

shielded power cables. The 3M Kit GSHA-8 QT II design

provides a fault current capacity of 15,000 Amps for 15

cycles on 15 kV, 25 kV and 35 kV class cables.

The 3M Kit GSHA-8 is designed to be used in conjunction

with 3M QT-II terminations in applications where high-

ampacity grounding is desired.

The 3M product GSHA-8 will accommodate cable sizes

ranging from 350 kcmil through 1000 kcmil and voltage

classes of 15 kV through 35 kV. The preformed ground

braid contained in the 3M Kit GSHA-8 has a fault current

capacity of 15,000 Amps for 15 cycles. Each kit provides

shielding and grounding for one termination.

Refer to the ordering table on page 401 for cable

information. Final determining factor, for cables not

specied, is a shield diameter range from 1.25" (32,0 mm).

3M™ Cable Grounding Kits 2252 and 2253

Jacketed Concentric Neutral Cable (JCN)

The 3M Cable Grounding Kits 2252 and 2253 provide

a simple, reliable and secure method for grounding and

resealing of the jacket of direct buried distribution cables.

These kits are designed for use with jacketed concentric

neutral (JCN) power cables ranging from 2 to 4/0 AWG,

rated through 35 kV. A common kit application is for

grounding a primary neutral at least every 1320 feet

(1/4 mile) per Rural Utilities Service (RUS) Bulletin 83-1.

404

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • 3/C Cable Breakout Boots and 3/C Phase Rejacketing System

Speciﬁcations for 3M™ Sealing and Grounding Products 15 kV, 25 kV and 35 kV

Speciﬁcations SG-2 SG-3 8473 GSHA-8 2252 2253 2254

CABLE TYPE Tape Shielded Cable, LC Shielded Cable

See pg. 399-400 for cable type illustration.

Jacketed Concentric Neutral Cable (JCN)

See pg. 400 for cable type illustration.

Each kit provides grounding and sealing for 1 splice or termination Each kit provides 1 cable ground

Shield O.D. Range 1.25-2.25"

(132,0-52,2 mm)

1.25-2.25"

(132,0-52,2 mm)

1.25-2.25"

(132,0-52,2 mm)

1.25-2.25"

(132,0-52,2 mm)

— — —

Conductor Range 350-1000 kcmil 350-1000 kcmil 350-1000 kcmil 350-1000 kcmil 2-4/0 AWG 250-500 kcmil 500-1000 kcmil

Circular Mil Area 61,000 72,000 — — — — —

KIT COMPONENTS:

PST Cold Shrink Tube — — 1 — — — —

Roll of Scotch® 13

Semiconducting Tape

— — — 1 — — —

Roll of Scotch 2228

Rubber Mastic Tape

— — — — 1 1 1

Roll of Scotch Super 33+

Vinyl Electrical Tape

— — — — 1 1 1

Tin-Plated Copper

“C” Connector

— — — — 1 1 1

Speciﬁcations for 3M™ Sealing and Grounding Products 15 kV, 25 kV and 35 kV

Speciﬁcations SG-2 SG-3 8473 GSHA-8 2252 2253 2254

10" (25,4 cm) Length of

Tin Plated Copper Braid

— — — — 1 1 1

Copper Screen Sleeve 1 1 — — — — —

Mastic Seal Strip 331 1111

Constant-Force Spring 241 1111

Preformed Ground Braid 1 1 1 1 — — —

Instructions 111 1111

Ordering Information

UPC (054007-) 50041 41511 50043 50042 08335 55648* 56939*

Case Qty. 10 each 10 each 10 each 10 each 10 each 10 each 10 each

* UPC preﬁx 051128-

405 PHONE 800-245-3573

3M™ Ground Strap Assembly GS Series

3M Ground Strap Assembly Kit GS Series is designed

for grounding tape- and wire-shielded power cables.

Check that cable conductor size matches the ground

strap assembly shown in the ordering table below.

Tape Shielded Cable

Wire Shielded Cable

Speciﬁcations and Ordering Information for 3M Ground Strap Assembly GS Series

Speciﬁcations GS-1 GS-2 GS-3

CABLE TYPE Jacketed URD Cable

See above for cable type illustration.

Strap Length x Width 4.75" x 0.31" 7.12" x 0.62" 6.87" x 0.62"

VOLTAGE AND INSULATION THICKNESS Conductor AWG Size Range (mm2)

5 kV-100%

90 mils

8-3/0

(10-80 mm2)

2/0-750

(70-325 mm2)

600-2000

(325-1000 mm2)

5 kV-133% 8 kV -100%

115 mils

8-1/0

(10-50 mm2)

1/0-750

(60-325 mm2)

500-2000

(300-1000 mm2)

8 kV-133%

140 mils

8-1

(10-38 mm2)

1-600

(50-300 mm2)

400-1750

(240-850 mm2)

15 kV- 100%

175 mils

—2-500

(35-250 mm2)

350-1750

(180-850 mm2)

15 kV- 133%

220 mils

—2-350

(35-180 mm2)

250-1500

(125-725 mm2)

25 kV

260 mils

—2-400

(35-200 mm2)

3/0-1000

(95-500 mm2)

35 kV

345 mils

—1/0-300

(60-150 mm2)

1/0-750

(60-325 mm2)

Ordering Information

UPC (054007-) 33976 33977 33978

Case Qty. 9 each 9 each 9 each

406

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • 3/C Cable Breakout Boots and 3/C Phase Rejacketing System

Product Information for 3M™ Constant Force Springs

Product Number CFS-0.47/0.78 CFS-0.80/1.50 CFS-1.00/2.20 CFS-1.50-3.00 CFS-1.50/3.00W CFS-1.80/4.00

APPLICATION RANGE

Min. inches (mm) 0.50" (12,7 mm) 0.80" (20,3 mm) 1.00" (25,4 mm) 1.50" (38,1 mm) 1.50" (38.1 mm) 1.80" (45,7 mm)

Max. inches (mm) 0.75" (19,0 mm) 1.50" (38,1 mm) 2.20" (56,0 mm) 3.00" (76,2 mm) 3.00" (76,2 mm) 4.00" (101.6 mm)

Width inches (mm) 0.500" (12,7 mm) 0.625" (15,9 mm) 0.625" (15,9 mm) 0.625" (15,9 mm) 0.750" (19,0 mm) 0.625" (15,9 mm)

STD. Carton 30 30 30 999

UPC (054007-) 42372 42374 42375 42376 42378 42379

3M™ Shield Grounding Accessory Kits GSK

3M Shield Grounding Accessory Kits GSK are used to

convert CN/JCN termination kits for use on shielded cables

minimum through 2.25" (57,2 mm) maximum.

Tape Shielded Cable

LC Shielded Cable

Speciﬁcations and Ordering Information for 3M™ QT-II Termination Kit

Product

Number

UPC

(051128-)

QT-II Term.

Kit Number

5 kV

(90 mil)

5/8 kV

(115 mil)

8 kV

(140 mil)

15 kV

(175 mil)

15 kV

(220 mil)

25/28 kV

(260/280 mil)

35 kV

(345 mil)

GSK-22 53087 5641 3/0-300 2/0-250 1/0-4/0 2-3/0 2-1/0 — —

5651 3/0-300 2/0-250 1/0-4/0 2-3/0 2-1/0 2-1 —

GSK-34 53088 5642 350-750 350-750 250-600 3/0-500 2/0-350 — —

5652 350-750 350-750 250-600 3/0-500 2/0-350 1/0-250 —

5646 350-750 350-750 250-600 3/0-500 2/0-350 1/0-250 2-3/0

GSK-56 53089 5643 750-1500 750-1250 600-1000 500-1000 350-500 — —

5644 1000-2000 1000-2000 800-1750 750-1750 600-1500 — —

5653 750-1500 750-1250 600-1000 500-1000 350-500 300-500 —

5654 1000-2000 1000-2000 800-1750 750-1750 600-1500 600-1250 —

5647 750-1500 750-1250 600-1000 500-1000 350-500 300-500 4/0-400

5648 1000-2000 1000-2000 800-1750 750-1750 600-1500 600-1250 500-1000

Speciﬁcations and Ordering Information for 3M™ QT-III Termination Kit

Product

Number

UPC

(051128-)

QT-III Term.

Kit Number

5 kV

(90 mil)

5/8 kV

(115 mil)

15 kV

(175/220 mil)

25/28 kV

(260/280 mil)

35 kV

(345 mil)

GSK-22 53087 7642-T-110 4/0-400 3/0-300 2-4/0 — —

7642-S-2 4/0-400 3/0-300 2-4/0 — —

7652-S-4 4/0-400 3/0-300 2-4/0 2-1/0 —

GSK-34 53088 7653-S-4 300-500 250-500 2/0-300 2-4/0 —

7654-S-4 500-750 350-700 4/0-500 2/0-250 —

7644-T-110 500-750 350-700 4/0-500 — —

7653-T-150 300-500 250-500 2/0-300 2-4/0 2-2/0

7663-S-8 300-500 250-500 2/0-300 2-4/0 2-2/0

7664-S-8 500-750 350-700 4/0-500 2/0-250 2-4/0

407 PHONE 800-245-3573

Speciﬁcations and Ordering Information for 3M™ QT-III Termination Kit

Product

Number

UPC

(051128-)

QT-III Term.

Kit Number

5 kV

(90 mil)

5/8 kV

(115 mil)

15 kV

(175/220 mil)

25/28 kV

(260/280 mil)

35 kV

(345 mil)

GSK-56 53089 7655-S-4 700-1500 600-1250 500-1000 250-800 —

7656-S-4 1750-2000 1500-2000 1250-2000 900-1750 —

7645-T-110 700-1500 600-1250 500-1000 — —

7646-T-110 1750-2000 1500-2000 1250-2000 — —

7655-T-150 700-1500 600-1250 500-1000 250-800 3/0-600

7656-T-150 1750-2000 1500-2000 1250-2000 900-1750 700-1500

7665-S-8 700-1500 600-1250 500-1000 250-800 3/0-600

7666-S-8 1750-2000 1500-2000 1250-2000 900-1750 700-1500

408

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • Insulating and Sealing Compounds

Insulating and

Sealing Compounds

3M™ Scotchcast™ Insulating and Sealing Compounds

are compatible with most cable insulations and jackets

and accommodate many splices, including odd-shaped

connectors. These compounds feature a high degree

of mechanical strength and provide moisture resistance

for above ground and buried applications.

Speciﬁcations for 3M™ Scotchcast Insulating and Sealing Compounds

Product

Name Description

Gel Time @ 73°

(23°C) Energize Time

Used in These

3M Kits

Maximum

Operating

Temperature Color

Scotchcast Electrical

Insulating Resin 4

PERMANENT

Rigid, hard material

Insulating up to 8 kV

Jacketing up to

69 kV epoxy

16 mins. 45 mins.* 82-A Series

82-B1

85-14CP

90-B1

194°F (90°C)

continuous

266°F (130°C)

overload

482°F (250°C)

intermittent

Black

Scotchcast Electrical

Insulating and

Sealing Compound

2104

PERMANENT

Semi-ﬂexible

1000 volts max.

Polyurethane

18 mins. Immediately 72-N

85 Series

194°F (90°C)

continuous

266°F (130°C)

overload

Dark

Green

Scotchcast 2123 Re-

enterable Electrical

Insulating Resin

RE-ENTERABLE

Flexible polybutadiene

62 mins. Immediately 78-R Series 194°F (90°C)

continuous

266°F (130°C)

overload

Amber,

Transparent

Scotchcast Flame

Retardant Compound

2130

FLAME RETARDANT

Semi-ﬂexible

5000 volts max.

Permanent urethane

MSHA P-142-5

15 mins. Immediately 5750, 5760, 5831,

5832, 82-F1,

82-F2, 82-BF1,

M-20, -30, -40

194°F (90°C)

continuous

266°F (130°C)

overload

Black

Scotchcast

Wet-Niche Potting

Compound 2135

FLEXIBLE

Wet niche putty

Urethane

15 mins. Immediately —UL Listed 2L02

220°F (105°C)

Black

*At 73°F (23°C) and cooler temperatures, resin will cure slower. Do not energize until resin has cooled and solidiﬁed.

409 PHONE 800-245-3573

Speciﬁcations and Ordering Information for 3M™ Scotchcast™ Resins

Product Number UPC (054007-) Size/Type of Package Inner Unit Pack Case Qty.

3M SCOTCHCAST ELECTRICAL INSULATING RESIN 4

4-A 43165 A/3.2 oz. (90 g)

4.8 cu. in. (78,6 cu. cm)

—10 containers

4-B 43166 B/7.4 oz. (209 g)

11.2 cu. in. (183,5 cu. cm)

—10 containers

4-C 43167 C/14.7 oz. (418 g)

22.3 cu. in. (365,4 cu. cm)

—10 containers

4-D 04206 D/22.2 oz. (630 g)

33.6 cu. in. (550,6 cu. cm)

—10 containers

4-E 04207 E/10.4 oz. (294 g)

15.7 cu. in. (257,2 cu. cm)

—10 containers

3M SCOTCHCAST ELECTRICAL INSULATING AND SEALING COMPOUND 2104

2104-A 31189 A/3.46 oz. (98 g)

5.7 cu. in. (93,4 cu. cm)

cont. 10 each

2104-B 31382 B/7.4 oz. (210 g)

12.6 cu. in. (206,4 cu. cm)

cont. 10 containers

2104-C 31383 C/14.82 oz. (420 g)

25.4 cu. in. (416,2 cu. cm)

1/box 10 containers

2104-D 11849 D/23.8 oz. (675 g)

40.8 cu. in. (668,5 cu. cm)

1/box 10 each

3M SCOTCHCAST RE-ENTERABLE ELECTRICAL INSULATING COMPOUND 2123

2123-C 55120* C/12.3 oz. (350 g)

23.7 cu. in. (338,3 cu. cm)

1/box 10 each

2123-D 55121* D/21.2 oz. (600 g)

40.6 cu. in. (665,3 cu. cm)

1/box 10 each

3M SCOTCHCAST FLAME RETARDANT COMPOUND 2130

2130-B 31401 B/7.6 oz. (216 g)

10.7 cu. in. (175,3 cu. cm)

1/box 10 each

2130-C 31402 C/21.7 oz. (616 g)

30.5 cu. in. (499,8 cu. cm)

1/box 10 each

2130 Part A 50237 A/5 gal. (18,93 L) 1 pail

2130 Part B 50238 B/5 gal. (18,93 L) 1 pail

3M SCOTCHCAST WET-NICHE POTTING 2135

2135 69798 F/1.83 oz. (52,5 g)

3.3 cu. in. (54,0 cu. cm)

1/box 10 each

3M SCOTCHCAST CABLE REPAIR COMPOUND 2135M

2135M 50433 F/6.9 oz. (195 g)

12.25 cu. in. (13,12 cu. cm)

—10 each

*UPC preﬁx 051128-

410

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • Mounting Brackets

Mounting Brackets

3M™ Mounting Brackets

MB and MBS Series

Single

Clamp

Double

Clamp

The 3M Mounting

Brackets MB and

MBS Series have

been designed to

mount 3M molded

rubber terminations.

These brackets are

attached to the cable

just below the

termination. This

provides a tongue

that can then be attached to an MB-1 mounting bracket or

to any other support. The 3M Brackets MB Series are made

from galvanized steel. The 3M Brackets MBS Series are

made from stainless steel to provide additional corrosion

protection in highly contaminated environments.

3M™ Cross-Arm Mounting Bracket MB-1

3M Cross-Arm Mounting Bracket MB-1 is a cross-arm

bracket for use in holding terminated cable. The MB-1

is ideal to use when ordering the MB or MBS termination

mounting brackets featured on this page.

Speciﬁcations and Ordering Information for 3M™ Hardware Accessories

Product Number

UPC

(054007-)

Cable

O.D. Range

Inner

Unit Pack Qty.

Case

Qty.

MB-1 11230 —1/box 10 each

MB-3 14754 0.80-1.25" (20-32 mm)* 1/box 10 each

MB-4 14755 1.10-1.50" (28-38 mm) 1/box 10 each

MB-5** 08200 1.45-1.95" (37-50 mm) 1/box 10 each

MB-6** 08286 1.80-2.40" (46-61 mm) 1/box 10 each

MBS-4** 49685 1.10-1.70" (28-43 mm) 1/box 10 each

MBS-5** 49686 1.45-1.95" (37-50 mm) 1/box 10 each

MBS-6** 49687 1.80-2.40" (46-61 mm) 1/box 10 each

*Caution: Use cable O.D., not insulation O.D. for determining the proper size.

**Has double clamps.

411 PHONE 800-245-3573

3M™ Cold Shrink Corrosion

Protection Kit CPT Series

3M Cold Shrink Corrosion Protection Kit CPT Series are

designed to provide a quick and easy method for protecting

bulkhead termination connectors from the corrosive

inuences of wet and salt-fog installation environments.

A CPT series assembly is an open-ended tubular rubber

sleeve which is factory expanded and assembled onto a

removable core. The core is removed after the assembly

has been positioned for installation over a bulkhead

terminator connector. Mastic strips are provided for

sealing between NPT tting threads and the enclosure

in use (junction box, cabinet, panel board, etc.). CPT

insulating sleeves are made of an EPDM rubber that

contains no chlorides or sulfers. Ten kits accommodate

1/2" through 4" bulkhead connectors.

To extend the useful life of this product in applications

where continuous exposure to high levels of ultra-violet

radiation are expected, overwrap with Scotch® Super 33+™

Vinyl Electrical Tape or Scotch Silicone Tape 70.

Features:

Simple installation, requires no tools•

Accommodates a wide range of bulkhead connectors•

No torches or heat required•

Good thermal stability•

Are designed to seal tight, retain its resiliency and •

pressure after prolonged years of aging and exposure

Excellent wet electrical properties•

Salt spray resistant. Meets requirements of ASTM B287, •

in a 5% salt solution with a 3.0-3.1 pH

Water-resistant. Meets the water seal requirements •

of ANSI C119.1

Resists fungus•

Resists acids, alkalies and ozone•

3M Cold Shrink Corrosion Protection Kit CPT Series Sizing Guide

Product Number

(NPT Size)

UPC

(054007-)

Cable O.D.

Minimum

in. (mm)

Connector

Inner

Unit Pack

Min. Order

Case Qty.

Maximum O.D.

in. (mm)

Maximum Installed

Length in. (mm)

CPT-1/2 43021 0.50" (13 mm) 1.60" (41 mm) 4.50" (114 mm) —10

CPT-3/4 43022 0.66" (17 mm) 1.90" (48 mm) 4.80" (122 mm) —10

CPT-1 43023 0.66" (17 mm) 2.20" (56 mm) 4.80" (122 mm) —10

CPT-1-1/4 43024 1.22" (31 mm) 2.65" (67 mm) 4.80" (122 mm) —10

CPT-1-1/2 43025 1.40" (36 mm) 3.00" (76 mm) 5.50" (140 mm) —10

CPT-2 43026 1.68" (43 mm) 3.60" (91 mm) 6.50" (165 mm) —10

CPT-2-1/2 43027 1.97" (50 mm) 4.30" (109 mm) 8.50" (215 mm) — 5

CPT-3 43028 2.60" (66 mm) 5.40" (137 mm) 8.50" (215 mm) — 5

CPT-3-1/2 43029 2.90" (74 mm) 6.00" (152 mm) 10.0" (254 mm) — 5

CPT-4 43030 2.90" (74 mm) 6.00" (152 mm) 10.5" (267 mm) — 5

412

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • 3M™ Cold Shrink Corrosion Protection Kit CPT Series

3M™ Metal Clad Jacketed Cable Connectors — Connector Cross Reference

Trade Size

(inches)

(NPT Size)

Cable Jacket Range

(inches)

Crouse-Hinds

(TMC or TMCX) Appleton T & B O-Z/Gedney

Min. Max.

1/2" 0.46" 0.71" TMCX165 TMCX6550 ST050-462

ST050-464

JMC-50-71

3/4" 0.65" 0.93" TMCX285 TMCX8875 ST075-467

ST075-468

JMC-75-115

1" 1.10" 1.45" TMCX3112 TMCX118100 ST100-469 JMC-100-145

1-1/4" 1.37" 1.79" TMCX4140 TMCX140125 ST125-470

ST125-550

ST125-471

JMC-125-179

1-1/2" 1.74" 2.15" TMCX5161 TMCX166150 ST150-472

ST150-473

JMC-150-215

2" 2.03" 2.59" TMCX6206 TMCX206200 ST200-551

ST200-474

ST200-475

ST200-476

JMC-200-259

2-1/2" 2.47" 3.03" TMCX7247 TMCX251250 ST250-477

ST250-478

JMC-250-303

3" 2.93" 3.61" TMCX8302 TMCX304300 ST300-479

ST300-480

ST300-481

JMC-300-361

3-1/2" 3.55" 4.23" TMCX9352 TMCX359350 ST350-482

ST350-483

JMC-350-423

4" 4.05" 4.73" TMCX10402 TMCX402400 ST400-484

ST400-485

JMC-400-473

413 PHONE 800-245-3573

Preparation and Cleaning

3M™ Scotch-Brite™ Hand Pads 7440 Series

3M Scotch-Brite Pads make the toughest cleaning jobs easier.

These pads are so versatile. They are designed to outperform

steel wool, wire brushes, sandpaper and other nonwoven

surface conditioning products and can be used with water

or solvents. They resist tearing, splintering, shredding and

loading and will never rust. All Scotch-Brite Pads measure

6" x 9" (152 x 228 mm). Blending Pads are made of a coarse

mineral abrasive. General Purpose Pads are reusable—they

rinse clean and are constructed of a nylon web. Ultra Fine

Pads are highly conformable.

Select the Scotch-Brite Pads for your specic abrasion

needs and carry them with you everywhere you work.

You can use them on virtually any surface material,

including all kinds of metals, plastics, composites,

ceramics, porcelain, glass and rubber.

3M™ Cable Cleaning System CC Series

3M Cable Cleaning System CC Series cleans cable

insulation, metal, electrical and mechanical parts. It can be

used for PCB cleanup and in parts cleaners for degreasing.

CC series solvent is also suitable for use on transformers,

generators, motors and metal parts of all sorts. It removes

surface oils, tars and heavy greases. Use of solvent on

carbon-containing semiconductive surfaces such as cable

insulation shields is not recommended.

CC series solvent can effectively replace 1.1.1- trichlorethane

and other hazardous solvents. Neither CC series solvent

nor its ingredients are presently subject to regulations that

would inhibit shipping, packaging or applications.

CC-Dry contains three each 4" x 8" (102 x 203 mm) lintless

non-woven pads packed in a bag. These are used for drying

the common citrus cable cleaner (CC series) off of cable

installation when preparing cable. The CC-2-Dry Kit

contains a CC-2 Kit and three each dry lintless pads.

414

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • Preparation and Cleaning

Speciﬁcations and Ordering Information for 3M™ Scotch-Brite Hand Pads 7440 Series

Speciﬁcations Blending Pads 7446 General Purpose Pads 7447 Ultra Fine Pads 7448

Features · Hand blending and ﬁnishing

stainless steel and aluminum

· Light oxide removal

· Paint removal

· Wood highlighting

· Scuff sanding, cleaning, ﬁnishing

and deburring

· Use for car reconditioning — cleaning

upholstery, headliners, white-wall tires,

door pads and chrome

· Deburring metals and ceramics

· Cleaning machinery

· Light duty — ideal for cosmetic

cleaning and creating consistent

ﬁnishes

Electrical Applications · Cleaning cable jackets, insulation and conductors

· Cleaning and polishing bus bar

· Cleaning insulators and cable accessories

· Rust removal from metal cabinets

· Relay contact cleaning

· Battery connections

Color Gray Maroon Gray

Size 6 x 9" (152 x 228 mm) 6 x 9" (152 x 228 mm) 6 x 9" (152 x 228 mm)

Ordering Information

UPC (048011-) 04051 04029 04028

Pads/Box 111

Case Qty. 1 case 1 case 1 case

Speciﬁcations and Ordering Information for 3M™ Cable Cleaning System CC Series

Speciﬁcations CC-2 CC-Dry CC-2-Dry CC-3 CC-4

Description Cable Cleaning

Preparation Kit

Cable Cleaning Pads Cable Cleaning Pads

and Kit

Cable Cleaning Pad Kit Cable Cleaning Solvent

(quart bottle)

Ordering Information CC-2 CC-Dry CC-2-Dry CC-3 CC-4

UPC (054007-) 49563 43415 43414 49564 49565

Case Qty. 10 each 10 kit 10 kit 10 each 4 each

Scotch® Electrician’s Abrasive Roll A-3

Scotch Electrician’s Abrasive Roll A-3 is a 120-grit, closed-

coat aluminum oxide strip, which is nonconductive and

exible. It is packaged in a dispenser-type box.

Ordering Information for Scotch® Electrician’s Abrasive Roll A-3

Product

Number

UPC

(054007-)

Size/Type of

Package

Inner

Unit Pack

Case

Qty.

A-3 11560 1" x yd./Grit 120J

(25,4 mm x 22,7 m)

5 rls 10 rls

415 PHONE 800-245-3573

3M™ Electrostatic

Animal Guard

3M Electrostatic Animal Guard (formerly Guthrie

Guard) is a patented electrostatic barrier which attaches

to energized electrical insulators/bushings rated up to 35

kV. The guard consists of rugged plastic with metal spokes

radiating outward. When an animal touches the spokes,

it receives an electric shock similar to those generated by

electried livestock fences. The animal is not injured and

power service is not interrupted.

With 3M Electrostatic Animal Guard, electric utilities

can minimize customer outages due to animal contact.

3M Electrostatic Animal Guard offers several advantages

over other conventional cover-up devices:

Can be installed while circuit is energized•

Maximum longevity•

Humane•

Wind gust retention spring.

Hot stick spring loop connection

allows for smooth installation/

removal.

Colored scarlet red for high visibility

and animal deterrence. Insulation extended to provide ﬂashover

protection.

Electrostatic prongs angle up, over

and across an animal’s path.

UV resistant polypropylene with

excellent dielectric strength.

Approximately 45% of line to ground

voltage of electrostatic energy at all points.

Contamination rinse nubs for stand-off protection

from insulator surface.

3M Electrostatic Animal Guard Speciﬁcations and Ordering Information

Product Number UPC (054007-) Insulator Neck Diameter Range* in. (mm)

GG-7525 43128 0.75-2.5" (19,1-63,7 mm)

GG-1525 43125 1.5-2.5" (38,2-63,7 mm)

GG-2545 43126 2.5-4.5" (63,7-114,7 mm)

GG-4565 43127 4.5-6.5" (114,7-165,7 mm)

* Insulator neck diameter range is deﬁned as the diameter of the insulator in between the skirts.

416

FAX 800-245-0329

CABLE ACCESSORY PRODUCTS • Overhead Conductor Animal Guard Cover

Overhead Conductor

Animal Guard Cover

3M™ Conductor Covers CCI Series are extruded silicone

rubber tubes designed for eld installation over bare

conductors to insulate them from adjacent phases,

grounded equipment, and animal contact. These covers

are made with a full-length longitudinal bias cut to allow

for easy slip-on installation, and provide an increased

creepage distance between the conductor and the outer

surface of the cover.

The covers are offered in two thickness sizes for covering

both 15 kV and 25 kV rated conductors, and are available

in ACSR conductor sizes from 2 AWG to 266 kcmil.

Features:

Excellent UV, arc and ozone resistance•

Good dielectric strength, conformability and cold •

weather installation

Munsel grey color•

Bias cut enables easy eld installation without any •

special tools

3M™ Conductor Covers CCI Series

Typical Dimensions

Speciﬁcations and Ordering Information for 3M Conductor Covers CCI Series

Product

Number

UPC

(054114-)

ACSR

Conductor

Size

Conductor

Voltage

Rating Dimension A Dimension B Order Quantity

CCI-2-125 04238 2 AWG 15 kV 0.34" (9 mm) 0.125" (3 mm) 100 ft. rolls

CCI-2/0-125 04239 2/0 AWG 15 kV 0.46" (12 mm) 0.125" (3 mm) 100 ft. rolls

CCI-266-125 04241 266 kcmil 15 kV 0.63" (16 mm) 0.125" (3 mm) 100 ft. rolls

CCI-2/0-200 04240 2/0 AWG 25 kV 0.46" (12 mm) 0.200" (5 mm) 100 ft. rolls

CCI-266-200 04242 266 kcmil 25 kV 0.63" (16 mm) 0.200" (5 mm) 100 ft. rolls

417 PHONE 800-245-3573

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

3M:

SS-31-10-P SS-31-8 SS-31-8-P SS-31-10 SS-32-10 SS-31-6-NB SS-31-6 SS-32-10-P SS-32-8-P SS-32-8 SS-

31-6-P SS-32-6-P SS-31-4 SS-31-4-NB SS-31-8-NB SS-31-10-NB SS-32-4-NB SS-32-4-P SS-32-6-NB SS-32-8-

NB SS-32-10-NB SS-32-14 SS-32-14-NB SS-32-14-P SS-33-6 SS-33-6-P SS-33-8 SS-33-8-NB SS-33-8-P SS-

33-10 SS-33-10-NB SS-33-10-P SS-33-14 SS-33-14-NB