OPB748WZ - Optek - Datasheet.Directory

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue C 10/11

Page 1 of 6

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Reflective Object Sensor

OPB708, OPB709

OPB740 Series, OPB740WZ Series

Description:

Each reflective object sensor in the OPB708, OPB709, OPB740 through OPB746 and OPB740WZ through

OPB746WZ series consists of an infrare d emitting diode and a NPN silicon phototransistor or a photodarlington.

The OPB747WZ and OPB748WZ consist of a Red visible LED and a low light level rejection (RBE) NPN silicon

phototransistor. The Red LED allows better contrast ratio when detecting Black marks on a White surface. All

these devices are mounted side-by-side on converging optical axes in a black plastic housing focusing on a small

area and depth of field.

OPB7 _ _ WZ series are wired (UL approved wire) devices that offer various lens o ptions, including no windows,

blue polysulfone windows for dust protection or opaque aperture windows with offset openings for improved target

resolution.

On each sensor included in this data sheet, the photosensor responds to radiation only when a reflective object

passes within its field of view.

Custom IC(ON) current binning, sp ecial wire lengths and connectorization is available through your OPTEK rep.

Features:

• Focused for maximum sensitivity

• Phototransistor or photodarlington output

• Crosstalk does not exceed specified ICEO

• 24” (610 mm) wire length

• 26 AWG wire size

Product Photo Here

Applications:

• Non-contact reflective object sensor

• Assembly line automation

• Machine automation

• Machine safety

• End of travel sensor

• Door sensor

• Thermal Paper Mark

OPB7_ _WZ

Series

OPB708,

OPB709,

OPB740,

OPB745

Series

Part

Number

LED Peak

Wavelength

Sensor

Reflection

Distance

Inch (mm)

Lead Length/

Wire Type

OPB708 935 nm Transistor

Min=0.08” [2.04mm]

Typ=0.15" [3.81mm]

Max=0.30” [7.62mm]

0.150"

Minimum

OPB709 Darlington

OPB740

890 nm

Transistor

OPB741

OPB742

OPB743

OPB744

OPB745 Darlington

OPB740WZ

Transistor

24" / 26

AWG Wire

OPB741WZ

OPB742WZ

OPB743WZ

OPB744WZ

OPB745WZ Darlington

OPB746WZ 935 nm

OPB747WZ 645nm

OPB748WZ Transistor

RBE Transistor

CONTAINS POLYSULFONE

To avoid stress cracking, we suggest using

ND Industries’ Vibra-Tite for thread-locking.

Vibra-Tite evaporates fast without causing structural

failure in OPTEK’s molded plastics.

Applies to: OPB460, OPB470, OPB480, OPB490.

RoHS

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C 10/11

Page 2 of 6

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Reflective Object Sensor

OPB708, OPB709

OPB740 Series, OPB740WZ Series

Color-PIN # LED Color-PIN # Transistor

Orange-1 Anode White-4 Collector

Green-2 Cathode Blue-3 Emitter

OPB708, OPB709, OPB740, OPB741,

OPB742, OPB743, OPB744, OPB745

OPB709,

OPB745,

OPB740WZ, OPB741WZ, OPB742WZ, OPB743WZ,

OPB744WZ, OPB745WZ, OPB746WZ, OPB747WZ,

OPB748WZ

Package Style

Part Number Lens Configuration

OPB708 D - No windows

OPB709 D - No windows

OPB740 A - No windows

OPB740WZ A - No windows

OPB741 B - Blue windows

OPB741WZ B - Blue windows

OPB742 C - Offset windows

OPB742WZ C - Offset windows

OPB743 A - No windows

OPB743WZ A - No windows

OPB744 B - Blue windows

OPB744WZ B - Blue windows

OPB745 C - Offset windows

OPB745WZ C - Offset windows

OPB746WZ B - Blue windows

OPB747WZ C - Offset windows

OPB748WZ C - Offset windows

DIMENSIONS ARE IN:

INCHES

[ MILLIMETERS]

OPB708

OPB740 thru OPB744 OPB746WZ,

OPB747WZ,

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue C 10/11

Page 3 of 6

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Reflective Object Sensor

OPB708, OPB709

OPB740 Series, OPB740WZ Series

Absolute Maximum Ratings (TA=25°C unless otherwise noted)

Operating and Storage T emperature Range

OPB708, OP709, OPB740, OPB741, OPB742, OPB743, OPB744, OPB745

OPB741WZ, OPB742WZ, OPB743WZ , OPB744WZ , OPB745WZ, OPB746WZ, OPB747WZ,

OPB748WZ

-40° C to +85° C

-40° C to +80° C

Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](1) 260°C

Input Diode (See OP165 (935 nm), OP265 (890 nm) or OVLAS6CB8 (645 nm) for additional information)

Forward DC Current 40 mA

Reverse DC Voltage 2 V

Power Dissipation(2) 100 mW

Sensor Output (See OP505 (Transistor), OP705 (RBE Transistor) or OP535 (Darlington) for additional Information)

Collector-Emitter Voltage

OPB708

OPB709

OPB740, OPB741, OPB742, OPB743, OPB744

OPB740WZ, OPB741WZ, OPB742WZ, OPB743WZ, OPB744WZ OPB748WZ

OPB745

OPB745WZ

OPB746WZ, OPB747WZ

30 V

15 V

30 V

15 V

24 V

Emitter-Collector Voltage

OPB708 through OPB745, OPB748

OPB746 through OPB747

5.0 V

0.4 V

Power Dissipation(2) 100 mW

Notes:

1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.

2. Derate linearly 1.33 mW° C above 25° C.

Electrical Characteristics (TA = 25°C unless otherwise noted)

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS

890 nm LED (See OP265 for additional information — for reference only)

VF Forward Voltage - - 1.8 V IF = 40 mA

IR Reverse Current - - 100 µA VR = 2 V

VF Forward Voltage - - 1.7 V IF = 40 mA

IR Reverse Current - - 100 µA VR = 2 V

935 nm LED (See OP165 for additional information — for reference only)

645 nm LED (See OVLAS6CB8 for generic i nformatio n — for reference only)

Forward Voltage - - 2.6 V IF = 20 mA

Reverse Current - - 100 µA VR = 2 V

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C 10/11

Page 4 of 6

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Reflective Object Sensor

OPB708, OPB709

OPB740 Series, OPB740WZ Series

Electrical Characteristics (TA = 25°C unless otherwise noted)

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS

Output RBE Phototransistor (See OP705 for general information — for reference only)

V(BR)CEO Collector-Emitter Breakdown Voltage 24 - - V IC = 100 µA

ICEO Collector Dark Current - - 100 nA VCE = 10 V, IF = 0, EE =0

Output Phototransistor (See OP505 for general informatio n — for reference only)

V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 100 µA

V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA

ICEO Collector Dark Current - - 100 nA VCE = 10 V, IF = 0, EE =0

Output Photodarlington (See OP535 for general information — for reference only)

V(BR)CEO Collector-Emitter Breakdown Voltage 15 - - V IC = 100 µA

V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA

ICEO Collector-Emitter Dark Current

OPB709, OPB745, OPB745WZ

µA

VCE = 5 V, IF = 0, EE =0

Coupled

VCE(SAT) Saturation Voltage

OPB708

OPB709

0.40

1.10

IF = 40 mA, Ic = 3 µA , d = 0.15”(1)(2)

IC(ON)(1)(2)

On-State Collector Current

OPB708

OPB709

OPB740, OPB740WZ

OPB741, OPB741W Z

OPB742, OPB742WZ

OPB743, OPB743WZ

OPB744, OPB744WZ

OPB745, OPB745WZ

OPB746WZ

OPB747WZ

OPB748WZ

0.01

1.00

0.05

0.01

0.20

5.00

0.50

0.01

3.00

2.50

0.70

2.00

26.0

2.50

0.70

VCE = 5 V, IF = 40mA ,

d = 0.15” (3.810 mm)

ICX(3)

Crosstalk

OPB708, OPB709,

OPB740, OPB740WZ

OPB741, OPB741WZ

OPB742, OPB742WZ

OPB743, OPB743WZ

OPB744, OPB744WZ

OPB745, OPB745WZ

OPB746WZ

OPB747WZ

OPB748WZ

10.0

1.0

20.0

25.0

1.0

µA

VCC = 5 V, IF = 40mA

Notes:

1. The distance from the assembly face to the reflective surface is “d”.

2. Reflective surface is Eastman Kodak (Catalog #190 3061) neutral white test card with 90% diffuse reflectance as a reflecting surface.

3. Crosstalk is the photocurrent measured with current to the input diode, no reflective surface and no ambient light (EE = 0).

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue C 10/11

Page 5 of 6

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Reflective Object Sensor

OPB708, OPB709

OPB740 Series, OPB740WZ Series

OPB708 - Output vs Forward Current vs Temp

0.00

0.50

1.00

1.50

2.00

2.50

0.00 5.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00

Forward Current (mA)

Normalized Output

-40° C

-20° C

0° C

20° C

40° C

60° C

80° C

Normalized Collector Current at 20mA and 20°C

OPB708 - Output vs Distance

0.00

0.20

0.40

0.60

0.80

1.00

1.20

1.40

0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00

Distance (inches)

No rmaliz ed O u tp ut (v olts )

Kodak 90%

Kodak 19%

Copier Paper

Avery Label

Retro Material

Normalized at 0.150" Kodak 90%

Transistor Output vs Distance

Transistor Output vs For ward Current

vs Temperature

0.90

1.00

1.10

1.20

1.30

1.40

1.50

0 5 10 15 20 25 30 35 40

Forward C urrent (mA)

Typical Forward Voltage

-40° C

-20° C

0° C

20° C

40° C

60° C

80° C

LED Forward Voltage vs Forward

Current vs Temperature

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue C 10/11

Page 6 of 6

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Reflective Object Sensor

OPB708, OPB709

OPB740 Series, OPB740WZ Series

OPB709 - Output vs Forward Current vs Temp

0.00

0.50

1.00

1.50

2.00

2.50

0.00 5.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00

Forw ard C urrent (mA)

Normalized Output

-40° C

-20° C

0° C

20° C

40° C

60° C

80° C

Normalized Collector Current at 20mA and 20°C

OPB709 - Output vs Distance

0.00

0.20

0.40

0.60

0.80

1.00

1.20

1.40

0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00

Distance (inch es)

No rm a lize d Out pu t (vo lts)

Kodak 90%

Kodak 19%

Copier Paper

Avery Label

Retro Material

Normalized at 0.150" Kodak 90%

Darlington Output vs Distance

Darlington Output vs Forward Current

vs Temperature

0.90

1.00

1.10

1.20

1.30

1.40

1.50

0 5 10 15 20 25 30 35 40

Forward Current (mA)

Typical Forward Voltage

-40° C

-20° C

0° C

20° C

40° C

60° C

80° C

LED Forward Voltage vs

Forward Current vs Temperature