Thin Film Precision Chip Resistors
Type CPF Series
Literature No. 1773200
Issued: 09-06
Dimensions are shown for
reference purposes only.
Dimensions are in millimetres
unless otherwise specified.
Specifications subject to
change.
www.tycoelectronics.com
passives.tycoelectronics.com
Key Features
Thin film precision resistors
with TC's of 25 and 50ppm
and tolerances to 0.1%.
Applications in measurement,
telemetry and for sensing
circuits.
Case sizes 0402, 0603, 0805,
1206, 2010 and 2512
CPF chip resistors are
suitable for all applications
where close accuracy and
stability are essential
Type CPF Series
Precision metal terminations are screen
printed onto a ceramic base and fired.
The resistive element is sputtered and
fired and the passivation layer added.
The pre-scribed tile is broken into
strips, the end plating is fired on and
the strips broken into individual
components. Final termination is made
by electroplating.
Characteristics -
Electrical
0402
0603 0805
Rated Power @ 70 °C (W) 0.063 0.063 0.1
Resistance Range (Ohms) Min 10R 4R7 2R0 4R7 1R0
Max 100K 402K 4R3 1M0 4R3
Tolerance (%) 0.1 0.5 1 0.1 0.5 1 0.5 1 0.1 0.5 1 0.5 1
Code letter B C F B C F C F B C F C F
Selection Series E24 + E96 E24 + E96 E24 + E96
Temperature Coefficient (ppm/°C) 25ppm 50ppm 25ppm 50ppm 50ppm 25ppm 50ppm
Code Letter E C E C C E C
Limiting Element Voltage (V) 25 60 100
Maximum Overload Voltage (V) 50 120 200
Operating Temperature Range (°C) -55 to +125 -55 to +125 -55 to +125
Climatic Category (°C) 55/125/55 55/125/55 55/125/55
Insulation Resistance Dry Min 10000 10000 10000
(Mohms)
Stability (%) 0.5 0.5 0.5
Dimensions
Style L W t a b
0603 1.6 ± 0.1 0.8 ± 0.1 0.45 ± 0.1 0.25 ± 0.1 0.2 ± 0.1
0805 2.0 ± 0.2 1.25 ± 0.2 0.5 ± 0.1 0.4 ± 0.2 0.3 ± 0.2
1206 3.1 ± 0.2 1.55 ± 0.2 0.55 ± 0.1 0.45 ± 0.2 0.3 ± 0.2
1206 2010 2512
Rated Power @ 70 °C (W) 0.125 0.25 0.5
Resistance Range (Ohms) Min 4R7 1R0 1M1 4R7 1R0 1M1 4R7 1R0 1M1
Max 1M0 4R3 2M0 1M0 4R3 2M0 1M0 4R3 2M0
Tolerance (%) 0.1 0.5 1 0.5 1 0.1 0.5 1 0.5 1 0.1 0.5 1 0.5 1
Code letter B C F C F B C F C F B C F C F
Selection Series E24 + E96 E24 + E96 E24 + E96
Temperature Coefficient (ppm/°C) 25ppm 50ppm 25ppm 50ppm 25ppm 50ppm
Code Letter EC E C E C
Limiting Element Voltage (V) 150 150 150
Maximum Overload Voltage (V) 300 300 300
Operating Temperature Range (°C) -55 to +125 -55 to +125 -55 to +125
Climatic Category (°C) 55/125/55 55/125/55 55/125/55
Insulation Resistance Dry Min 10000 10000 10000
(Mohms)
Stability (%) 0.5 0.5 0.5
L
W
t
b
a
Thin Film Precision Chip Resistors
Type CPF Series
Literature No. 1773200
Issued: 09-06
Dimensions are shown for
reference purposes only.
Dimensions are in millimetres
unless otherwise specified.
Specifications subject to
change.
www.tycoelectronics.com
passives.tycoelectronics.com
Performance Characteristics
The evaluation of the performance characteristics is carried out with reference to IECQ
specifications QC 400 000 and QC 400 100.
Storage
Unopened reels should be stored within a temperature range of +5 °C to +25 °C, separated from any dust, chemicals and
solvent based materials. Non-adherence to this procedure could affect the solderability of this product.
TEST REF Long Term Tests ±(0.5% + 0.05 ohm)
4.23 Climatic sequence
4.24 Damp heat, steady state
4.25.1 Endurance at 70 °C
4.25.3 Endurance at 125 °C
TEST REF Short Term Tests ±(0.5% + 0.05 ohm)
4.13 Overload
4.32 Adhesion
4.33 Bond strength of end face plating
4.19 Rapid change of temperature
4.18 Resistance to soldering heat
Marking
E24 series resistors are marked with a three digit code.
E96 series resistors are marked with a four digit code.
0603 E96 series are unmarked.
Mounting
The resistors are suitable for processing on automatic insertion equipment.
How to Order
CPF 0603 B 100R E
Common Part
0603
0805
1206
Package Size
B - 0.1%
D - 0.5%
Tolerance Value
CPF - Chip Precision
Film Resistor
100 ohms
(100 ohms) 100R
1 K ohm
(1000 ohms) 1K0
100 K ohm
(100000 ohms) 100K
TCR
E - 25ppm
C - 50ppm
0 20 40 60 80 100 120 125 140
100
80
60
40
20
0
Percent Rated Power
Ambient Temperature (°C)
Derating Curve