ULN2001, ULN2002 ULN2003, ULN2004 Seven Darlington array Datasheet - production data Features Seven Darlingtons per package Output current 500 mA per driver (600 mA peak) Output voltage 50 V Integrated suppression diodes for inductive loads Outputs can be paralleled for higher current TTL/CMOS/PMOS/DTL compatible inputs Inputs pinned opposite outputs to simplify layout Description The ULN2001, ULN2002, ULN2003 and ULN 2004 are high voltage, high current Darlington arrays each containing seven open collector Darlington pairs with common emitters. Each channel rated at 500 mA and can withstand peak currents of 600 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. DIP-16 SO-16 (Narrow) These versatile devices are useful for driving a wide range of loads including solenoids, relays DC motors, LED displays filament lamps, thermal printheads and high power buffers. The ULN2001A/2002A/2003A and 2004A are supplied in 16 pin plastic DIP packages with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO-16) as ULN2001D1/2002D1/2003D1/ 2004D1 The versions interface to all common logic families: - ULN2001 (general purpose, DTL, TTL, PMOS, CMOS) - ULN2002 (14 - 25 V PMOS) - ULN2003 (5 V TTL, CMOS) - ULN2004 (6 - 15 V CMOS, PMOS) Table 1. Device summary Order codes ULN2001A ULN2001D1013TR ULN2002A ULN2002D1013TR ULN2003A ULN2003D1013TR ULN2004A ULN2004D1013TR June 2012 This is information on a product in full production. Doc ID 5279 Rev 8 1/16 www.st.com 16 Contents ULN2001, ULN2002, ULN2003, ULN2004 Contents 1 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6 Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 7 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 8 Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 Doc ID 5279 Rev 8 ULN2001, ULN2002, ULN2003, ULN2004 1 Diagram Figure 1. Schematic diagram Diagram ULN2001 (each driver) ULN2002 (each driver) ULN2003 (each driver) ULN2004 (each driver) Doc ID 5279 Rev 8 3/16 Pin configuration 2 Pin configuration Figure 2. Pin connections (top view) 4/16 ULN2001, ULN2002, ULN2003, ULN2004 Doc ID 5279 Rev 8 ULN2001, ULN2002, ULN2003, ULN2004 3 Maximum ratings Maximum ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VO Output voltage 50 V VI Input voltage (for ULN2002A/D - 2003A/D 2004A/D) 30 V IC Continuous collector current 500 mA IB Continuous base current 25 mA TA Operating ambient temperature range - 40 to 85 C Storage temperature range - 55 to 150 C 150 C TSTG TJ Table 3. Symbol RthJA Junction temperature Thermal data Parameter Thermal resistance junction-ambient, Max. Doc ID 5279 Rev 8 DIP-16 SO-16 Unit 70 120 C/W 5/16 Electrical characteristics 4 ULN2001, ULN2002, ULN2003, ULN2004 Electrical characteristics TA = 25 C unless otherwise specified. Table 4. Symbol ICEX Electrical characteristics Parameter Output leakage current Collector-emitter saturation VCE(SAT) voltage (Figure 5.) II(ON) Input current (Figure 6.) Test condition Min. VI(ON) 50 TA = 85C, VCE = 50 V (Figure 3.) 100 TA = 85C for ULN2002, VCE = 50 V, VI = 6 V (Figure 4.) 500 TA = 85C for ULN2002, VCE = 50 V, VI = 1V (Figure 4.) 500 IC = 100 mA, IB = 250 A 0.9 1.1 IC = 200 mA, IB= 350 A 1.1 1.3 IC = 350 mA, IB= 500 A 1.3 1.6 for ULN2002, VI = 17 V 0.82 1.25 for ULN2003, VI = 3.85 V 0.93 1.35 for ULN2004, VI = 5 V 0.35 0.5 1 1.45 Input current (Figure 7.) TA = 85C, IC = 500 A Input voltage (Figure 8.) VCE= 2 V, for ULN2002 IC = 300 mA for ULN2003 IC = 200 mA IC = 250 mA IC = 300 mA for ULN2004 IC = 125 mA IC = 200 mA IC = 275 mA IC = 350 mA hFE DC Forward current gain (Figure 5.) CI Input capacitance tPLH Turn-on delay time tPHL Max. VCE = 50 V, (Figure 3.) for ULN2001, VCE = 2 V, IC = 350 mA Unit A V mA VI = 12 V II(OFF) Typ. 50 65 A 13 2.4 2.7 3 V 5 6 7 8 1000 15 25 pF 0.5 VI to 0.5 VO 0.25 1 s Turn-off delay time 0.5 VI to 0.5 VO 0.25 1 s Clamp diode leakage current (Figure 9.) VR = 50 V 50 IR TA = 85C, VR = 50 V 100 VF Clamp diode forward voltage (Figure 10.) 6/16 IF = 350 mA Doc ID 5279 Rev 8 A 1.7 2 V ULN2001, ULN2002, ULN2003, ULN2004 Test circuits 5 Test circuits Figure 3. Output leakage current Figure 5. Collector-emitter saturation voltage Figure 6. Input current (ON) Figure 7. Input current (OFF) Input voltage Figure 4. Figure 8. Doc ID 5279 Rev 8 Output leakage current (for ULN2002 only) 7/16 Test circuits Figure 9. 8/16 ULN2001, ULN2002, ULN2003, ULN2004 Clamp diode leakage current Figure 10. Clamp diode forward voltage Doc ID 5279 Rev 8 ULN2001, ULN2002, ULN2003, ULN2004 6 Typical performance characteristics Typical performance characteristics Figure 11. Collector current vs. saturation voltage (TJ = 25C) Figure 12. Collector current vs. saturation voltage I OUT [mA] 85C 25C -30C IIN = 500 A VCESAT [V] Figure 13. Input current vs. input voltage Figure 14. Input current vs. input voltage (Ta = 25C) ULN2003A Ta = 25C ULN2003A Iout=100 mA Io ut=200mA Max Iou t=300mA Typ Min Figure 15. Collector current vs. input current Figure 16. hFE vs. output current 85 C I OUT [mA] -30 C 25 C VCE = 2 V DC Current Transfer Ratio (hFE) 10000 VCE = 2 V 85 C 1000 -40 C 25 C 100 10 1 1 10 100 1000 Output current IOUT [mA] IIN [A] Doc ID 5279 Rev 8 9/16 Typical performance characteristics ULN2001, ULN2002, ULN2003, ULN2004 Figure 17. Peak collector current vs. duty cycle (DIP-16) Ic peak (mA) D96IN451 NUMBER OF ACTIVE OUTPUT 7 6 5 500 4 3 2 Figure 18. Peak collector current vs. duty cycle (SO-16) Ic peak (mA) D96IN452A Tamb=70C (SO16) 500 400 400 300 300 Tamb=70C (DIP16) 2 3 5 200 200 7 100 100 NUMBER OF ACTIVE OUTPUT 0 0 0 10/16 20 40 60 80 DC Doc ID 5279 Rev 8 0 20 40 60 80 100 DC ULN2001, ULN2002, ULN2003, ULN2004 7 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 5. DIP-16L mechanical data mm. Dim. Min. Typ. A Max. 5.33 A1 0.38 A2 2.92 3.30 4.95 b 0.36 0.46 0.56 b2 1.14 1.52 1.78 c 0.20 0.25 0.36 D 18067 19.18 19.69 E 7.62 7.87 8.26 E1 6.10 6.35 7.11 e 2.54 e1 17.78 eA 7.62 eB L 10.92 2.92 Doc ID 5279 Rev 8 3.30 3.81 11/16 Package mechanical data ULN2001, ULN2002, ULN2003, ULN2004 Figure 19. DIP-16L package dimensions 0015895_E 12/16 Doc ID 5279 Rev 8 ULN2001, ULN2002, ULN2003, ULN2004 Table 6. Package mechanical data SO-16 narrow mechanical data mm. inch. Dim. Min. Typ. A a1 Max. Min. Typ. 1.75 0.1 0.25 a2 Max. 0.069 0.004 0.009 1.6 0.063 b 0.35 0.46 0.014 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 c1 0.020 45 (typ.) D(1) 9.8 10 0.386 0.394 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F(1) 3.8 4.0 0.150 0.157 G 4.60 5.30 0.181 0.208 L 0.4 1.27 0.150 0.050 M 0.62 S 0.024 8 (max.) Figure 20. SO-16 package dimensions Doc ID 5279 Rev 8 13/16 Order codes 8 Order codes Table 7. 14/16 ULN2001, ULN2002, ULN2003, ULN2004 Order codes Part numbers Packages ULN2001A DIP-16 ULN2002A DIP-16 ULN2003A DIP-16 ULN2004A DIP-16 ULN2001D1013TR SO-16 in tape and reel ULN2002D1013TR SO-16 in tape and reel ULN2003D1013TR SO-16 in tape and reel ULN2004D1013TR SO-16 in tape and reel Doc ID 5279 Rev 8 ULN2001, ULN2002, ULN2003, ULN2004 9 Revision history Revision history Table 8. Revision history Date Revision Changes 05-Dec-2006 5 Order code updated and document reformatted. 28-Aug-2007 6 Added Table 1 in cover page. 07-May-2012 7 Modified: Figure 12 on page 9. Added: Figure 13, 14, 15 and Figure 16 on page 9. 01-Jun-2012 8 Updated: DIP-16L package mechanical data Table 5 on page 11 and Figure 19 on page 12. Doc ID 5279 Rev 8 15/16 ULN2001, ULN2002, ULN2003, ULN2004 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 Doc ID 5279 Rev 8