www.fairchildsemi.com 2
100LVEL11
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
Note 1: The “Absolute Maximum Ratings” are thos e values bey ond which
the saf ety of the device cannot be gu aranteed. Th e device shoul d not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “R ecomm ended Oper ating Co ndition s” table will def ine the condit ions
for actu al device operation.
LVPECL DC Electrical Characteristics VCC = 3.3V; VEE = 0.0V (Note 2)
Note 2: Input and output parameters vary 1 to 1 with VCC. VEE can vary ± 0.3V.
Note 3: Outputs ar e t erminat ed t hrough a 50Ω Re sistor to VCC − 2.0V.
Note 4: VIHCMR m inim um var ies 1 to 1 w ith VEE. VIHCMR m aximum varies 1-to-1 with VCC. The VIHCMR range is referenced to the most positive side of the
differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltag e lies between VPPMIN and
1V.
Note 5: Absolute v alue of the input H IG H and LOW c urrent sho uld not exc eed the absolute va lue of the sta t ed M i n or Max sp ec if ic at ion.
Note: Devices are designed to meet the DC specifications after thermal equilibrium has been established. Circuit is tested with air flow greater than
500LFPM maintained.
PECL Supply Voltage (VCC) VEE = 0V 0.0V to +8.0V
NECL Supply Voltage (VEE) VCC = 0V 0.0V to −8.0V
PECL DC In put Voltage (VI) VEE = 0V 0.0V to +6.0V
NECL DC Input V oltage (VI) VCC = 0V 0.0V to −6.0V
DC Output Current (IOUT)
Continuous 50 mA
Surge 100 mA
Storage Temperature (TSTG)−65°C to +150°C
PECL Power Supply Operating
(VEE = 0V) VCC = 3.0V to 3.8V
NECL Power Supply Operating
(VCC = 0V) VEE = −3.8V to −3.0V
Free Air Oper ating Te mperature (TA)−40°C to +85°C
Symbol Parameter −40°C 25°C 85°CUnits
Min Typ Max Min Typ Max Min Typ Max
IEE Power Supply Current 24 28 24 28 25 30 mA
VOH Output HIGH Voltage (Note 3) 2215 2295 2420 2275 2345 2420 2275 2345 2420 mV
VOL Output LOW Voltage (Note 3) 1470 1605 1745 1490 1595 1680 1490 1595 1680 mV
VIH Input HIGH Voltage (Single Ended) 2135 2420 2135 2420 2135 2420 mV
VIL Input LOW Voltage (Single Ended) 1490 1825 1490 1825 1490 1825 mV
VIHCMR Input HIGH Voltage Common Mode
Range (Differential) (Note 4)
VPP < 500m V 1.2 3.1 1.1 3.1 1.1 3.1 V
VPP ≥ 500m V 1.4 3.1 1.3 3.1 1.3 3.1
IIH Input HIGH Current (Note 5) 150 150 150 µA
IIL Input LOW Current (Note 5) D 0.5 0.5 0.5 µA
D−600 −600 −600