Revised January 2003 100LVEL11 3.3V ECL 1:2 Differential Fanout Buffer General Description Features The 100LVEL11 is a low voltage 1:2 differential fanout buffer. One differential input signal is fanned out to two identical differential outputs. By supplying a constant reference level to one input pin a single ended input condition is created. Typical propagation delay of 330 ps Typical IEE of 24 mA Typical skew of 5 ps between outputs Internal pull-down resistors on D With inputs Open or both inputs at VEE, the differential Q outputs default LOW and Q outputs default HIGH. Fairchild MSOP-8 package is a drop-in replacement to ON TSSOP-8 The 100 series is temperature compensated. Meets or exceeds JEDEC specification EIA/JESD78 IC latch-up tests Moisture Sensitivity Level 1 ESD Performance: Human Body Model > 2000V Machine Model > 200V Ordering Code: Package Order Number Number Product Code Package Description Top Mark 100LVEL11M M08A KVL11 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 100LVEL11M8 (Preliminary) MA08D KV11 8-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide Devices also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code. Connection Diagram Logic Diagram Top View Pin Descriptions Pin Name Description Q0, Q0, Q1, Q1 ECL Data Outputs D, D ECL Data Inputs VCC Positive Supply VEE Negative Supply (c) 2003 Fairchild Semiconductor Corporation DS500775 www.fairchildsemi.com 100LVEL11 3.3V ECL 1:2 Differential Fanout Buffer January 2003 100LVEL11 Absolute Maximum Ratings(Note 1) PECL Supply Voltage (VCC) VEE = 0V 0.0V to +8.0V Recommended Operating Conditions NECL Supply Voltage (VEE) VCC = 0V 0.0V to -8.0V PECL Power Supply Operating PECL DC Input Voltage (VI) VEE = 0V 0.0V to +6.0V NECL DC Input Voltage (VI) VCC = 0V 0.0V to -6.0V (VEE = 0V) VCC = 3.0V to 3.8V NECL Power Supply Operating (VCC = 0V) DC Output Current (IOUT) Continuous 50 mA Surge 100 mA -40C to +85C Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The "Recommended Operating Conditions" table will define the conditions for actual device operation. -65C to +150C Storage Temperature (TSTG) VEE = -3.8V to -3.0V Free Air Operating Temperature (TA) LVPECL DC Electrical Characteristics VCC = 3.3V; VEE = 0.0V (Note 2) Symbol -40C Parameter Min Typ 25C Max Min Typ 85C Max Min Typ Max Units IEE Power Supply Current 24 28 24 28 25 30 mA VOH Output HIGH Voltage (Note 3) 2215 2295 2420 2275 2345 2420 2275 2345 2420 mV VOL Output LOW Voltage (Note 3) 1470 1605 1745 1490 1595 1680 1490 1595 1680 mV VIH Input HIGH Voltage (Single Ended) 2135 2420 2135 2420 2135 2420 mV VIL Input LOW Voltage (Single Ended) 1490 1825 1490 1825 1490 1825 mV VIHCMR Input HIGH Voltage Common Mode VPP < 500mV 1.2 3.1 1.1 3.1 1.1 3.1 VPP 500mV 1.4 3.1 1.3 3.1 1.3 3.1 Range (Differential) (Note 4) IIH Input HIGH Current (Note 5) IIL Input LOW Current (Note 5) 150 150 150 D 0.5 0.5 0.5 D -600 -600 -600 V A A Note 2: Input and output parameters vary 1 to 1 with VCC. VEE can vary 0.3V. Note 3: Outputs are terminated through a 50 Resistor to VCC - 2.0V. Note 4: VIHCMR minimum varies 1 to 1 with VEE. VIHCMR maximum varies 1-to-1 with VCC. The VIHCMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPMIN and 1V. Note 5: Absolute value of the input HIGH and LOW current should not exceed the absolute value of the stated Min or Max specification. Note: Devices are designed to meet the DC specifications after thermal equilibrium has been established. Circuit is tested with air flow greater than 500LFPM maintained. www.fairchildsemi.com 2 Symbol -40C Parameter Min Typ 25C Max Min Typ 85C Max Min Typ Max Units IEE Power Supply Current 24 28 24 28 25 30 mA VOH Output HIGH Voltage (Note 7) -1085 -1005 -880 -1025 -955 -880 -1025 -955 -880 mV VOL Output LOW Voltage (Note 7) -1830 -1695 -1555 -1810 -1705 -1620 -1810 -1705 -1620 mV VIH Input HIGH Voltage (Single Ended) -1165 -880 -1165 -880 -1165 -880 mV VIL Input LOW Voltage (Single Ended) -1810 -1475 -1810 -1475 -1810 -1475 mV VIHCMR Input HIGH Voltage Common Mode VPP < 500mV -2.1 -0.2 -2.2 -0.2 -2.2 -0.2 VPP 500mV -1.9 -0.2 -2.0 -0.2 -2.0 -0.2 Range (Differential) (Note 8) IIH Input HIGH Current (Note 9) IIL Input LOW Current (Note 9) 150 150 150 D 0.5 0.5 0.5 D -600 -600 -600 V A A Note 6: Input and output parameters vary 1 to 1 with VCC. VEE can vary 0.3V. Note 7: Outputs are terminated through a 50 Resistor to VCC - 2.0V. Note 8: VIHCMR minimum varies 1-to-1 with VEE. VIHCMR maximum varies 1 to 1 with VCC. The VIHCMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPMIN and 1V. Note 9: Absolute value of the input HIGH and LOW current should not exceed the absolute value of the stated Min or Max specification. Note: Devices are designed to meet the DC specifications after thermal equilibrium has been established. Circuit is tested with air flow greater than 500LFPM maintained. AC Electrical Characteristics VCC = 3.3V; VEE = 0.0V or VCC = 0.0V; VEE = -3.3V (Note 10)(Note 11) Symbol Parameter -40C Min Typ 25C Max Min 385 235 85C Typ Max Min 330 405 250 Typ Max fMAX Maximum Toggle Frequency 1 tPLH, tPHL Propagation Delay to Output 215 tSKEW Within Device Skew (Note 12) 5 20 5 20 5 20 Duty Cycle Skew (Note 13) 5 20 5 20 5 20 1 TBD 1 TBD Units Figure Number GHz 435 ps Figure 1 ps tJITTER Cycle-to-Cycle Jitter VPP Input Swing 200 1000 200 1000 200 TBD 1000 mV Figure 1 tr, tf Output Rise Times Q (20% to 80%) 120 320 120 320 120 320 ps Figure 2 Note 10: VEE can vary 0.3V. Note 11: Measured using a 750 mV input swing centered at VCC - 1.32V; 50% duty cycle clock source; tr = tf = 250 ps (20% - 80%) at fIN =1 MHz. All loading with 50 to VCC - 2.0V. Note 12: Within-device skew defined as identical transitions on similar paths through a device. Note 13: Duty cycle skew is the difference between a tPLH and tPHL propagation delay through a device under identical conditions. 3 www.fairchildsemi.com 100LVEL11 LVNECL DC Electrical Characteristics VCC = 0.0V; VEE = -3.3V (Note 6) 100LVEL11 Switching Waveforms FIGURE 1. Differential to Differential Propagation Delay FIGURE 2. Differential Output Edge Rates www.fairchildsemi.com 4 100LVEL11 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M08A 5 www.fairchildsemi.com 100LVEL11 3.3V ECL 1:2 Differential Fanout Buffer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 8-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide Package Number MA08D Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 6