Catalog 1308242 Issued 3-03 P&B K10 series 15 Amp General Purpose Miniature Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features DC Coils * K10 - DPDT contact arrangement standard. * AC and DC coils. * Mounting options include socket, PCB, top flange. * UL Class B coil insulation system. Nominal Voltage 6 12 24 48 110 120* 240* Contact Data @ 25C Resistance in Ohms 10% 40 160 650 2,600 11,000 ___ ___ AC Coils Nominal Current in Milliamps Resistance in Ohms 15% Nominal Current in Milliamps 150 75 37 18.5 10 ___ ___ 10.5 43 160 668 ___ 3,900 12,000 200 100 52 26 ___ 11 6 *For 220/240VDC operation, use 11,000 Ohm, 5 Watt dropping resistor in series with the 110VDC coil. Materials: Silver-cadmium oxide. Expected Life: 10 million operations, mechanical; 100,000 operations minimum at rated loads. Contact Ratings Contact Code 5 Material Silver-cadmium oxide UL/CSA Ratings 15A @ 30VDC 15A @ 120VAC 10A @ 277VAC 1/3HP @ 120VAC 1/2HP @ 250VAC Type Resistive Resistive Resistive Operate Data @ 25C Must Operate Voltage: DC Coils: 75% of nominal voltage. AC Coils: 85% of nominal voltage. Operate Time (Excluding Bounce): 13 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): 6 milliseconds, typical, at nominal voltage. Initial Dielectric Strength Between Open Contacts: 1,000V rms. Between Adjacent Contacts: 1,500V rms. Between Contacts and Coil: 1,500V rms. Environmental Data Temperature Range: Storage: -60C to +105C. Operating: -45C to +70C. Coil Data @ 25C Mechanical Data Nominal Power: DC Coils: .9 Watts. AC Coils: 1.2VA. Maximum Power: 2.0 Watts. Duty Cycle: Continuous. Insulation: Class B: (130C). Dimensions are shown for 720 reference purposes only. Mounting: Socket mount, printed circuit board, top flange. Termination: .187" (4.75mm) quick connect/solder terminals, or printed circuit terminals. Enclosure: Smoke-color polycarbonate dust cover. Weight: 1.8 oz. (51g) approximately. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B K10 P -11 D 1 5 -6 1. Basic Series: K10 = 15 amp miniature relay. 2. Cover: P = Polycarbonate (smoke color). 3. Contact Arrangement: 11 = 2 Form C (DPDT) 4. Coil Input: A = 50/60 Hz. AC D = DC 5. Mounting & Termination: 1 = Socket mount; .187" (4.75mm) quick connect/solder terminals. 5 = Printed circuit terminals; .160" length. T = Mounting bracket on end of cover; .187" (4.75mm) quick connect/solder terminals. 6. Contact Type: 5 = 15 amp silver-cadmium oxide 7. Coil Voltage: To 240VAC or 110VDC, see coil data table. Our authorized distributors are more likely to stock the following items for immediate delivery. K10P-11D55-24 K10P-11D55-110 K10P-11DT5-12 K10P-11DT5-24 K10P-11D15-6 K10P-11D15-12 K10P-11D15-24 K10P-11D15-110 K10P-11D55-12 K10P-11A15-6 K10P-11A15-12 K10P-11A15-24 K10P-11A15-120 K10P-11AT5-120 Outline Dimensions .078 (1.98) 5 6 2 4 B .281 (7.14) .239 REF. (6.07) 1 3 A .559 (14.20) .517 (13.13) .232 (5.89) .285 (7.24) 5 6 .020 .0 02 (.51 .05) B .160 (4.06) .142 TYP. (3.61) 1.682 MAX. (42.72) .394 .860 MAX. (10.01) (21.84) .181 (4.60) PC Board Layout .394 .185 (10.01) (4.70) 2 4 A .078 (1.98) .020 .0 02 (.51 .05) 1.109 MAX. (28.17) 1 3 .078 TYP. (1.98) 1.720 MAX. (43.69) .25 (6.4) .854 MAX. (21.69) w/NEON INDICATOR 1.625 MAX. (41.28) 1.400 MAX. (35.56) w/NEON INDICATOR 1.600 MAX. (40.64) 1.375 MAX. (34.93) .125 (3.18) .187 .0 02 (4.75 .05) Mounting Code T Printed Circuit Terminals 1.480 .0 03 (37.59 .08) Mounting Code 5 Socket Mount 1.087 .010 (27.61 .25) Mounting Code 1 Wiring Diagram .086 DIA. (2.18) 1 2 3 4 5 6 A B .559 (14.20) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 721 Catalog 1308242 Issued 3-03 P&B Sockets and Accessories for K10 Relays Sockets for K10 series relays are rated 10 amps, and are UL recongnized, File E59244, and CSA certified, File LR15734. 27E488 Pierced Solder Terminals .844 (21.44) 20C217 Hold Down Spring For 27E488 & 27E489 Chassis Cutout For Mounting 27E488 Socket .075 (1.90) 1.158 (29.41) .629 .617 (15.98) (15.67) .850 .0 05 (21.79 .13) .440 (11.18) .072 x .140 (1.83 x 3.56) .070 (1.78) Recommended chassis thickness .039" (.99mm) to .079" (2.01mm). .770 (19.56) Socket punch Greenlee part 5015115.0, Type 731R available from Greenlee Tool Co., Rockford, Illinois. 27E489 Printed Circuit Terminals .844 (21.44) P.C. Board Layout For Socket .440 (11.18) .075 (1.90) 1.158 (29.41) .672 (17.07) .012 (0.30) .620 (15.75) .184 (4.69) 1.323 (33.60) 1.388 (35.26) 1.015 1.750 (25.78) (44.45) .090 R. (2.29) .090 (2.29) .429 (10.90) .859 (21.79) .13 (3.3) .16 (4.1) .065 (1.65) .180 (4.57) .32 (8.1) 37D633 will mount eight 27E488 sockets in one length of aluminum strip measuring 10.97" x 2.25" x .062". (278.64 x 57.15 x 1.57) Caution: Printed circuit sockets are manufactured with "floating" (loose) terminals. This permits them to align with holes in the circuit board and with the relay terminals. During the mounting and soldering of the socket, vertical float should be eliminated and the terminals seated on the board. (This may be accomplished by inserting a dummy relay in the socket.) Failure to eliminate float may cause fracture of the solder joint or separation of the copper conductor from the printed circuit board when a relay is inserted in the socket after soldering. .507 .086 DIA. TYP. (2.18) (12.88) .113 (2.87) 1.388 (35.26) .25 (6.4) 1.015 .0 05 (28.07 .13) .012 (0.30) 37D633 Mounting Strip .417 (10.59) .185 (4.70) Note: P.C. terminal socket will also fit P.C. board layout for relay. However, in order to accomplish this, terminals must be formed accordingly. .078 (1.98) 27E895 Screw Terminals, DIN Rail Snap-Mount 27E487 Screw Terminals 20C426 Hold Down Spring (Use with mounting track 24A110) For 27E487 & 27E895 Terminal Location 1.036 (26.31) 4 Terminal Location 1.130 (28.70) 3 1.299 (32.99) 4 3 2 1 1.375 (34.93) 2 1 2.750 (69.85) 2.598 (65.99) .170 TYP. (4.32) B A 8 7 .156 TYP. (3.96). 8 .315 TYP. (8.00) 6 5 .313 TYP. (7.94) .669 (16.99) 1.178 (29.92) 7 6 5 1.385 (35.18) .995 (25.27) Dimensions are shown for 722 reference purposes only. .312 (7.92) Dimensions are in inches over (millimeters) unless otherwise specified. 1.045 (26.54) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover.