LARGE ALUMINUM ELECTROLYTIC CAPACITORS
Standard snap-in terminal type
Extended Voltage range of 6.3~500V
(For 500WV products, apply only FL series, high ripple use)
Including height 20mm products, low profile sized
(Voltage range of 160~450V)
DRAWING
Shorter terminal(4.0 0.5) is also available upon request.
Terminal length of height 20mm products is applied shorter terminal to standard terminal type.
Snap-in Terminal Type, Standard
Series
HC
Unit : mm
Item Characteristics
Operating temperature range
Capacitance tolerance
Leakage current max.
Dissipation factor max.
(at 120Hz, 20 C)
Load life
(after application of the rated
voltage for 2000 hours at 85 C)
Shelf life
(after leaving capacitors under
no load at 85 C for 1000 hours)
WV 350 : -40 ~ +85 C, WV>350 : -25 ~ +85 C
20% at 120Hz, 20 C
I=3 CV ( A) (after 5 minutes)
Capacitance > 1000 F : tan increases by 0.01 for each 1000 F from below value.
WV
tan
10
0.40
6.3
0.45
16, 25
0.35
35
0.30
50, 63
0.25
80, 100
0.20
160~400
0.15 450,500
0.20
Leakage current
Capacitance change
tan
Less than specified value
Within 15% of initial value
Less than 150% of specified value
Leakage current
Capacitance change
tan
Less than specified value
Within 20% of initial value
Less than 200% of specified value
Solvent Proof
WV 200V
PC Board
Mounting Holes Terminal
10
Bottom plate
Safety vent
Insulating sleeve
Terminal
220.1
D1 max.
L2 max.
0.8 0.1
1.5 0.1
0.8 0.1
6.0 1
10 0.2
6.0 1 4.0 0.5
PC Board
Mounting Holes
Bottom plate
Safety vent
Insulating sleeve Blank
Blank
30 30 30
D1 max.
22.5 0.2
L2 max.
4 2 0.1
6.0 1
22.5
D35
D40