MIL-DTL-83723/79E
1 October 2010
SUPERSEDING
MIL-DTL-83723/79D
20 October 2000
DETAIL SPECIFICATION SHEET
CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING),
RECEPTACLE, (FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN
CONTACT), (SERIES III, CLASSES H, J, L, P AND Y)
This specificat ion is approved for use by al l Departments
and Agencies of the Department of Defense.
The requirement s for acquiring the product described herein
shall consist of this specification sheet and MIL-DTL-83723.
FIGURE 1. Dimensions and configurat i ons.
AMSC N/A FSC 5935
INCH - POUND
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:04Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/79E
2
FIGURE 1. Dimensions and configurat i ons - Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:04Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/79E
3
Shell
size A B C
dia D
dia E
dia F
dia G
dia
8 .812 .594 .561 .428
.433
.312 .500 .120
10 .937 .719 .696 .530
.535
.388 .562 .120
12 1.031 .812 .875 .700
.705
.558 .750 .120
14 1.125 .906 .935 .769
.774
.627 .812 .120
16 1.250 .969 1.062 .896
.901
.772 .937 .120
18 1.343 1.062 1.187 1.002
1.007
.860 1.062 .120
20 1.437 1.156 1.312 1.127
1.132
.985 1.187 .120
22 1.562 1.250 1.437 1.252
1.257
1.110 1.312 .120
24 1.703 1.375 1.562 1.377
1.382
1.235 1.437 .149
FIGURE 1. Dimensions and configurat i ons - Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:04Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/79E
4
Shell
size
P
dia
S
+.005/
-.000
Panel
cutout for
C
dia
Panel
cutout for
F
dia
CC
8 .536
.531
.508 .630
.620
.515
.505
.406
10 .659
.654
.636 .758
.748
.582
.572
.443
12 .829
.824
.806 .923
.913
.770
.760
.668
14 .898
.893
.875 .990
.980
.832
.822
.668
16 1.025
1.020
1.002 1.117
1.107
.958
.948
.763
18 1.131
1.126
1.108 1.219
1.209
1.082
1.072
.862
20 1.256
1.251
1.233 1.347
1.337
1.202
1.192
1.108
22 1.381
1.376
1.358 1.462
1.452
1.332
1.322
1.204
24 1.506
1.501
1.483 1.587
1.577
1.452
1.442
1.388
FIGURE 1. Dimensions and configurat i ons - Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:04Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/79E
5
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.0025
0.065
.378
9.60
.700
17.78
.958
24.33
1.235
31.37
.003
0.08
.380
9.65
.705
17.92
.969
24.61
1.250
31.75
.004
0.10
.388
9.86
.719
18.26
.970
24.64
1.251
31.78
.005
0.13
.392
9.96
.730
18.54
.980
24.89
1.252
31.80
.010
0.25
.400
10.16
.748
19.00
.985
25.02
1.256
31.90
.015
0.38
.406
10.31
.750
19.05
.988
25.10
1.257
31.93
.018
0.48
.428
10.87
.758
19.25
.990
25.15
1.312
33.32
.020
0.51
.433
11.00
.760
19.30
1.002
25.45
1.322
33.58
.022
0.56
.443
11.25
.763
19.38
1.007
25.58
1.328
33.73
.032
0.81
.490
12.45
.769
19.53
1.020
25.91
1.332
33.83
.052
1.32
.500
12.70
.770
19.56
1.025
26.04
1.337
33.96
.071
1.80
.505
12.83
.772
19.61
1.031
26.19
1.343
34.11
.072
1.83
.508
12.90
.774
19.66
1.062
26.97
1.346
34.19
.076
1.93
.515
13.08
.806
20.47
1.072
27.23
1.347
34.21
.078
1.98
.530
13.46
.812
20.62
1.082
27.48
1.358
34.49
.084
2.13
.531
13.49
.822
20.88
1.096
27.96
1.375
34.93
.089
2.26
.535
13.51
.824
20.93
1.107
28.12
1.376
34.95
.090
2.29
.536
13.61
.829
21.06
1.108
28.14
1.377
34.98
.094
2.39
.540
13.72
.832
21.13
1.110
28.19
1.381
35.08
.097
2.46
.558
14.17
.860
21.84
1.114
28.30
1.382
35.10
.101
2.57
.560
14.22
.862
21.98
1.117
28.37
1.388
35.26
.106
2.69
.561
14.25
.875
22.23
1.125
28.58
1.437
36.50
.108
2.74
.562
14.27
.890
22.61
1.126
28.60
1.442
36.63
.112
2.84
.572
14.53
.893
22.68
1.127
28.63
1.452
36.88
.125
3.18
.582
14.78
.896
22.76
1.131
28.73
1.462
37.13
.138
3.51
.594
15.09
.898
22.81
1.132
28.75
1.470
37.34
.144
3.66
.602
15.29
.900
22.86
1.156
29.36
1.483
37.67
.198
5.03
.620
15.75
.901
22.89
1.187
30.15
1.501
38.13
.204
5.18
.627
15.93
.906
23.01
1.192
30.28
1.506
38.25
.225
5.72
.630
16.00
.913
23.19
1.202
30.53
1.562
39.67
.259
6.58
.636
16.15
.918
23.32
1.204
30.58
1.577
40.06
.312
7.92
.654
16.61
.923
23.44
1.209
30.71
1.578
40.08
.330
8.38
.659
16.74
.935
23.75
1.219
30.96
1.587
40.31
.366
9.30
.668
16.97
.937
23.80
1.220
30.99
1.596
40.54
.376
9.55
.696
17.68
.948
24.08
1.233
31.32
1.703
43.26
NOTES:
1. Dimensions are i n i nches.
2. Metric equivalents are given f or i nformation only.
3. Unless otherwis e specified, toleran ces are ± .005 inches (0.13 mm ) for three place decimals,
±.01 inches (0.25 mm) for two place decimals and ± 1° for all angles.
4. Dimensions appl y after plating.
5. Surface finish: 63 ( ) all over in accord ance with ASME-B46.1, unle ss otherwise specified.
6. Remove all burrs and sharp edges .003 to .005 inches (0.076 to 0.127 mm) R.
7. Diameters to be concentric within .004 inches (0.102 mm) TIR.
8. Diameter in the same cross-sectional plane to be concentric with each other within .003 inches
(0.076 mm) TIR.
9. See table I for contact cavities requiring this dimensio n.
FIGURE 1. Dimensions and configurat i ons – Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:04Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/79E
6
REQUIREMENTS:
Dimensions and configuration: See f igure 1.
This connector mat es with MIL-DTL-83723/75 and /77.
For insert arrangements, see MIL-STD-1554 and table I.
TABLE I. Insert arrangements re quiring reduced dia m eters for raised seal
barriers on contact cav ities as indicated.
Shell size Insert arrangements Contact cavities
8 03, 98 1, 2, and 3
10 06 1, 2, 3, 4, 5, and 6
Connector accessories: See SAE-AS85049.
Part or Identif ying Number (PIN) example:
M83723/ 79 H 22 55 N
Military desig nation
Specification sheet number
Class
Shell size
Insert arrangement
Polarizing position
Changes from prev i ous issue. Marginal notations are not use d i n this revision to identif y changes with
respect to the prev ious issue due to the extent of the chang es.
Referenced docum ents. In addition to M IL-DTL-83723, this document references the following:
MIL-DTL-83723/75
MIL-DTL-83723/77
MIL-STD-1554
ASME-B46.1
SAE-AS85049
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:04Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/79E
7
CONCLUDING MATERIAL
Custodians: P reparing activit y:
Army - CR DLA - CC
Navy - AS
Air Force – 85 (Project 593 5-2010-047)
DLA - CC
Review activities:
Army - AR, MI
Navy - EC
Air Force - 19, 99
NOTE: The activ i ties listed above were interested in this do cument as of the date of this document.
Since organizat ions and responsibilities can change, you should verify the curre ncy of the information
above using the A S SIST Online database at https://assist.daps.dla.mil.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:04Z
Check the source to verify that this is the current version before use.
