Single Digit High Brightness LED Numeric Display Datasheet LAP-601 SIM-013STW1 B / L Series LAP-601 B / L series are the numberical display units featuring ROHM's in-house 4-element(AlGaInP) high-brightness LED dies.Their luminous intensity is top class in the industry while degradation is considerably slow, which helps to keep illumination vividness almost unchanged and the image of sets high over a long period of time. lFeatures 1) 14.6mm for letter height, single-line LED numerical displays. 2) About 10 times more luminous intensity than the conventional products by use of 4-element LED dies. (in case of orange color) 3) The same luminous intensity as the conventional products at their 1/10 of current, which contributes lots to energy-saving of sets. 4) Light-leakage from segments probable with the small display packages is very rare. 5) Both anode common type and cathode common type are available in lineup for each color. lDimensions (Unit : mm) lPin assignments Pin No. Function 1 Segment "e" 2 Segment "d" 3 Common 4 Segment "c" 5 D.P 6 Segment "b" 7 Segment "a" 8 Common 9 Segment "b" 10 Segment "g" lInternal circuit schematic lSelection guide Emitting color Red Orange Yellow Green Common LAP-601VB LAP-601DB LAP-601YB LAP-601MB Anode LAP-601VL LAP-601DL LAP-601YL LAP-601ML Cathode www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 1/4 2017.03 - Rev.B Datasheet LAP-601 B / L Series lAbsolute maximum ratings (Ta = 25C) Parameter Red Symbol Orange Yellow Green Unit LAP-601VB / VL LAP-601DB / DL LAP-601YB / YL LAP-601MB / ML Power dissipation PD 448 448 448 448 mW Power dissipation PD / seg 56 56 56 56 mW Forward current IF 20 20 20 20 mA Peak forward current IFP 60 *1 60 *1 60 *1 60 *1 mA Reverse voltage VR 5 5 5 5 Operating temperature Topr -25 to +75 C Storage temperature Tstg -30 to +85 C V *1 Pulse width 1ms, duty 1 / 5 lElectrical and optical characteristics (Ta = 25C) Parameter Symbol Red Conditions Orange Yellow Green Unit Typ. Max. Typ. Max. Typ. Max. Typ. Max. Forward voltage VF IF =10mA 1.9 2.6 1.9 2.6 1.9 2.6 1.9 2.6 V Reverse current IR VR =3V - 100 - 100 - 100 - 100 mA Peak wavelength lp IF=10mA 650 - 605 - 590 - 572 - nm Spectral line halfwidth Dl IF=10mA 20 - 20 - 20 - 20 - nm Not designed for radiation resistance. lLuminous intensity Parameter lp Red 650 Orange 605 Yellow 590 Green 572 Type LAP-601VB LAP-601VL LAP-601DB LAP-601DL LAP-601YB LAP-601YL LAP-601MB LAP-601ML Min. Typ. Max. Unit 14 36 - mcd 56 250 - mcd 90 450 - mcd 36 100 - mcd Condition IF=10mA www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 2/4 2017.03 - Rev.B Datasheet LAP-601 B / L Series lElectrical and optical characteristics curves Fig.2 Relative Luminous Intensity vs. Forward Current Forward Current : IF [mA] Relative Luminous Intensity Fig.1 Forward Current vs. Forward Voltage Forward Voltage : VF [V] Forward Current : IF [mA] Fig.3 Relative Luminous Intensity vs. Case Temperature Case Temperature : TC [C] www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 3/4 100Hz 200Hz 500Hz 1kHz 2kHz 5kHz 10kHz 20kHz 10 50kHz Ratio of Maximum Tolerable peak Current to Maximum Forward Current Relative Luminous Intensity IF = 10mA IF peak Max . IF Max . Fig.4 Ratio of Maximum Tolerable Peak Current vs. Pulse Duration 1 1 10 100 1000 10000 Pulse Duration : tw [ms] 2017.03 - Rev.B Datasheet LAP-601 B / L Series lElectrical and optical characteristics curves Forward Current : IF [%] Fig.5 Derating Ambient Temperature : Ta [C] www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 4/4 2017.03 - Rev.B Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. R1102A Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ROHM Semiconductor: LAP-601VL LAP-601MB