NJG1657MD7 DPDT SWITCH GaAs MMIC ! GENERAL DESCRIPTION The NJG1657MD7 is a GaAs DPDT switch featured low insertion loss, high isolation and small size package, and suited for mobile terminal applications. The NJG1657MD7 switches a path between common RF port and five RF ports by three bit control signal from 1.7V of logical high voltage. In addition, this switch includes ESD protection circuits for good ESD tolerance. The NJG1657MD7 is available in a very small, lead-free, halogen-free, 1.6mm x 1.6mm x 0.397 mm, 14-pin EQFN14-D7 package. ! FEATURES " Low insertion loss " High isolation " High power handling " Package ! PACKAGE OUTLINE NJG1657MD7 0.3dB typ. @f=0.9GHz, PIN=30dBm 32dB typ. @f=0.9GHz, PIN=30dBm P-0.1dB=33dBm min. @f=0.9GHz, VDD=2.85V EQFN14-D7 (Package size: 1.6x1.6x0.397mm typ.) ! PIN CONFIGURATION EQFN14-D7 (Top view) 14 13 12 1 11 Pin connection 8. GND 1. GND 9. P2 2. GND 10. GND 3. P1 11. GND 4. GND 12. VDD 5. P3 13. CTL1 6. GND 14. CTL2 7. P4 *Exposed PAD: GND DECODER 2 10 SW5 3 SW6 SW3 9 SW2 SW1 SW4 4 8 5 6 7 ! TRUTH TABLE "High"=VCTL(H), "Low"=VCTL(L) PATH CTL1 CTL2 SW1 SW2 SW3 SW4 SW5 SW6 P1-P3 Low Low ON OFF OFF ON OFF ON P1-P4 High Low OFF ON ON OFF OFF ON P2-P3 Low High OFF ON ON OFF ON OFF P2-P4 High High ON OFF OFF ON ON OFF NOTE: Please note that any information on this catalog will be subject to change. Ver.2008-08-22 -1- NJG1657MD7 ! ABSOLUTE MAXIMUM RATINGS Ta=+25C, Zs=Zl=50 ohm PARAMETER SYMBOL CONDITIONS CONDITIONS UNITS RF Input Power PIN VDD=2.85V, VCTL=0/2.6V 36 dBm Supply Voltage VDD VDD terminal 5.0 V Control Voltage VCTL CTL1, CTL2 terminal 5.0 V 1300 mW 4-layer FR4 PCB with through-hole (74.2x74.2mm), Tj=150C Power Dissipation PD Operating Temp. Topr -40~+95 C Storage Temp. Tstg -55~+150 C ! ELECTRICAL CHARACTERISTICS1 (DC CHARACTERISTICS) General conditions: VDD=2.85V, VCTL(L)=0V, VCTL(H)=2.6V, Ta=+25C, ZS=Zl=50 ohm, with application circuit PARAMETERS SYMBOL Operating Voltage VDD Operating Current IDD CONDITIONS PIN=30dBm MIN TYP MAX UNITS 2.5 2.85 4.5 V - 50 100 A Control Voltage (LOW) VCTL(L) 0 - 0.5 V Control Voltage (HIGH) VCTL(H) 1.7 2.6 4.5 V ICTL - 5 10 A Control Current -2- NJG1657MD7 ! ELECTRICAL CHARACTERISTICS2 (RF CHARACTERISTICS) General conditions: VDD=2.85V, VCTL(L)=0V, VCTL(H)=2.6V, Ta=+25C, ZS=Zl=50 ohm, with application circuit PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS Insertion Loss 1 LOSS1 f=0.9GHz, PIN=30dBm - 0.30 0.45 dB Insertion Loss 2 LOSS2 f=1.9GHz, PIN=30dBm - 0.40 0.55 dB Isolation 1 ISL1 f=0.9GHz, PIN=30dBm 30 32 - dB Isolation 2 ISL2 f=1.9GHz, PIN=30dBm 24 26 - dB 0.1dB Compression input power P-0.1dB f=0.9GHz 33 35 - dBm 2nd Harmonic Suppression 2fo f=0.9GHz, PIN=30dBm - -75 -60 dBc 3rd Harmonic Suppression 3fo f=0.9GHz, PIN=30dBm - -75 -60 dBc f=0.9GHz, ON State - 1.2 1.4 - 2 5 VSWR (PC, P1, P2) Switching time VSWR TSW s -3- NJG1657MD7 ! TERMINAL INFORMATION No. SYMBOL DESCRIPTION 1,2,4,6,8, 10,11 GND Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. 3 P1 RF input / output port. External capacitor is required to block the DC bias voltage of internal circuit. 5 P3 RF input / output port. External capacitor is required to block the DC bias voltage of internal circuit. 7 P4 RF input / output port. External capacitor is required to block the DC bias voltage of internal circuit. 9 P2 RF input / output port. External capacitor is required to block the DC bias voltage of internal circuit. 12 VDD A supply voltage terminal (+2.5~+4.5V). Please place a bypass capacitor between this and GND for avoiding RF noise from outside. 13 CTL1 Control port. "High level" is DC +1.7V~4.5V, "Low level" is DC 0~+0.5V. 14 -4- CTL2 NJG1657MD7 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) 0.0 Insertion Loss vs. Frequency VSWR vs. Frequency ( P1-P3 ON, VDD=2.85V, CTL1=CTL2=0V ) ( P1-P3 ON, VDD=2.85V, CTL1=CTL2=0V ) 2.0 1.8 -0.5 VSWR Insertion Loss (dB) P1 port P3 port -1.0 1.6 1.4 -1.5 1.2 -2.0 0.5 1.0 1.5 2.0 2.5 1.0 0.5 3.0 1.0 Frequency (GHz) Isolation vs. Frequency 0 2.0 2.5 3.0 Insertion Loss vs. Input Power ( f=0.9GHz, P1-P3 ON, CTL1=CTL2=0V ) ( P1-P3 ON, VDD=2.85V, CTL1=CTL2=0V ) 0.0 P1-P2 P3-P4 Insertion Loss (dB) -5 -10 Isolation (dB) 1.5 Frequency (GHz) -15 -20 -25 -30 -0.5 -1.0 V =2.5V DD V =2.85V -1.5 DD V =3.2V DD -35 V =4.5V DD -40 0.5 1.0 1.5 2.0 2.5 -2.0 3.0 10 15 20 Frequency (GHz) 30 35 40 Input Power (dBm) Harmonics vs. Input Power Transmission vs. Control Voltage ( f=900MHz, P1-P3 ON, CTL1=CTL2=0V ) ( P2-P4 ON, f=900MHz, V =2.85V, CTL1=2.6V ) DD -50 0 2fo 3fo -5 Transmission (dB) -55 Harmonics (dBc) 25 -60 -65 -70 -75 -80 -10 -15 o -45 C o -20 -20 C o +25 C -25 o +70 C o -90 +90 C Input 2fo=-88dBc Input 3fo=-86dBc -85 20 22 24 26 28 Input Power (dBm) 30 -30 32 o +100 C -35 0 0.5 1 1.5 2 CTL2 Voltage ( V ) -5- NJG1657MD7 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) Insertion Loss vs. Ambient Temperature VSWR vs. Ambient Temperature ( P1-P3 ON, V =2.85V, CTL1=CTL2=0V ) ( P1 port, V =2.85V, CTL1=CTL2=0V ) DD 0.0 DD 2.0 1.8 f=1.9GHz -0.5 VSWR Insertion Loss (dB) f=0.9GHz -1.0 f=0.9GHz 1.6 1.4 f=1.9GHz -1.5 1.2 -2.0 1.0 -50 0 50 -50 100 o P1-P2 Isolation vs. Ambient Temperature P1-P2 Isolation vs. Ambient Temperature ( f=1.9GHz, V =2.85V ) DD DD -20 P1-P3 ON P1-P4 ON P2-P3 ON P2-P4 ON P1-P3 ON P1-P4 ON P2-P3 ON P2-P4 ON -25 Isolation (dB) -25 Isolation (dB) 100 o ( f=900MHz, V =2.85V ) -30 -35 -30 -35 -40 -40 -50 0 50 100 -50 o 0 50 100 o Ambient Temperature ( C ) Ambient Temperature ( C ) P3-P4 Isolation vs. Ambient Temperature P3-P4 Isolation vs. Ambient Temperature ( f=1.9GHz, V =2.85V ) ( f=900MHz, V =2.85V ) DD -20 DD -20 P1-P3 ON P1-P4 ON P2-P3 ON P2-P4 ON P1-P3 ON P1-P4 ON P2-P3 ON P2-P4 ON -25 Isolation (dB) -25 Isolation (dB) 50 Ambient Temperature ( C ) -20 -30 -30 -35 -35 -40 -40 -50 0 50 100 o Ambient Temperature ( C ) -6- 0 Ambient Temperature ( C ) -50 0 50 100 o Ambient Temperature ( C ) NJG1657MD7 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) P1-P3 Isolation vs. Ambient Temperature P2-P4 Isolation vs. Ambient Temperature ( f=900MHz, V =2.85V ) ( f=900MHz, V =2.85V ) DD -20 DD -20 P1-P4 ON P1-P4 ON P2-P3 ON P2-P3 ON -25 Isolation (dB) Isolation (dB) -25 -30 -30 -35 -35 -40 -40 -50 0 50 100 -50 0 o DD vs. Ambient Temperature CTL 100 Ambient Temperature ( C ) P I ,I 50 o Ambient Temperature ( C ) -0.1dB vs. Ambient Temperature ( f=0.9GHz, P1-P3 ON, V =2.85V ) DD 37 60 I I DD 36 CTL 35 (dBm) 40 -0.1dB 30 34 33 P Current I I DD CTL (A) 50 20 32 10 31 0 30 -50 0 50 100 -50 o 50 100 Ambient Temperature ( C ) 3rd Harmonics vs. Input Power 2nd Harmonics vs. Input Power ( f=900MHz, P1-P3 ON, CTL1=CTL2=0V ) ( f=900MHz, P1-P3 ON, CTL1=CTL2=0V ) -50 -50 o -45 C -55 o -20 C -60 o +25 C o +70 C -65 o +90 C o +100 C -70 o -45 C -55 o 3rd Harmonics (dBc) 2nd Harmonics (dBc) 0 o Ambient Temperature ( C ) -75 -80 Input 2fo=-88dBc -85 -20 C -60 o +25 C o +70 C -65 o +90 C o +100 C -70 -75 -80 -85 Input 2fo=-86dBc -90 -90 20 22 24 26 28 Input Power (dBm) 30 32 20 22 24 26 28 30 32 Input Power (dBm) -7- NJG1657MD7 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) Switching Time Switching Time vs. Ambient Temperature ( V =2.85V, CTL1=0V ) ( V =2.85V ) DD DD 2 Switching Time (us) Voltage (arb. unit) CTL2 Port 1.3 s P3 Port 1.5 1 0.5 0 -50 Time (0.5 sec/div) 0 50 100 o Ambient Temperature ( C ) Current I Insertion Loss vs. Input Power DD vs. Input Power ( f=0.9GHz, P1-P3 ON, CTL1=CTL2=0V ) ( f=0.9GHz, P1-P3 ON, CTL1=CTL2=0V ) 60 0.0 (uA) 40 DD Current I Insertion Loss (dB) 50 -0.5 -1.0 V =2.5V DD V =2.85V -1.5 30 V =2.5V 20 DD V =2.85V DD DD V =3.2V V =3.2V 10 DD DD V =4.5V V =4.5V DD DD -2.0 0 10 15 20 25 30 Input Power (dBm) -8- 35 40 10 15 20 25 30 Input Power (dBm) 35 40 NJG1657MD7 ! APPLICATION CIRCUIT 0/2.6V 0/2.6V 1000pF CTL2 14 CTL1 13 2.85V VDD 12 1 11 DECODER 2 10 SW5 P1 3 56pF SW6 SW3 P2 9 SW2 SW1 56pF SW4 4 8 5 6 7 56pF 56pF P3 P4 ! TEST PCB LAYOUT (TOP VIEW) PCB: FR-4, t=0.2mm GND VDD CTL1 CTL2 Capacitor size: 1005 Strip Line Width: 0.4mm PCB size: 26 x 26mm P1 P2 C5 C1 C3 C2 Losses of PCB, capacitors and connectors Frequency (GHz) Loss (dB) 0.9 0.30 1.9 0.49 C4 PARTS LIST PART ID Value C1~C4 56pF MURATA 1000pF (GRM15) C5 P3 COMMENT P4 PRECAUTIONS [1]The DC blocking capacitors have to be placed at RF terminal of P1, P2, P3, P4 and PC. Please choose appropriate capacitance values to the application frequency. [2]To reduce strip line influence on RF characteristics, please locate bypass capacitors(C5) as close as possible to each terminals. [3]For good isolation, the GND terminal must be connected to the ground plane of substrate, and through-holes for GND should be placed near by the pin connection. -9- NJG1657MD7 ! PACKAGE OUTLINE (EQFN14-D7) Cautions on using this product This product contains Gallium-Arsenide (GaAs) which is a harmful material. * Do NOT eat or put into mouth. * Do NOT dispose in fire or break up this product. * Do NOT chemically make gas or powder with this product. * To waste this product, please obey the relating law of your country. This product may be damaged with electric static discharge (ESD) or spike voltage. Please handle with care to avoid these damages. - 10 - [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.