184
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Dot Matrix LED
■ General Description
Sharp's dot matrix LEDs can express characters and symbols on a display.
(Number of dots: 5✕7, 8✕8, 16✕16). We can supply wide color variation;
high-luminosity red T series, yellow-green E series, sunset orange S series,
dichromatic emission, etc.
■ Dot Matrix LED
*1 Common pins show row.(Column row)
LT5038T
LT5037T
LT5010T LT5010D
LT5105D
LT5106D
LT5008D
LT5014D
LT5106S
LT5014S
LT5005S
LT5106E
LT5105E
LT5040ET
LT5050ET
LT5007ED
LT5027ED
LT5017ED
LT5026ED
LT5013T
LT5005T
Number of dots
*1Common pins
Outline
dimensions
(mm) Red
(High-luminosity)
T
Outline dimensions
Radiation color
Page Figure
K
12.7✕17.85✕7
8✕8
16✕16
20✕20
40✕40
96✕96
30.2✕30.2
31.8✕31.8
31.9✕31.9
A
K 2
3
1
4
5
5/6
7
8
9
186
10
11
K
A
K
A
K
A
K
A
A
K
A
A
A
Red
(High-luminosity)
T
Sunset orange
S
Red
DD
Yellow-green
E
Yellow
green
E
Yellow-green
+
E
187
188
+Red
LT5038T LT5017ED LT5040ET
185
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Dot Matrix LED
*1 Common pins show row.(Column row) *2 Duty ratio=1/10, Pulse width=0.1ms
*3 Duty ratio=1/16, pulse width=0.1ms
LT5026ED
LT5037T
LT5010T
LT5010D
LT5106D
LT5106S
LT5106E
LT5105D
LT5105E
LT5007ED
LT5008D
LT5014D
LT5014S
LT5005S
LT5040ET
LT5005T
LT5013T
LT5050ET
LT5027ED
LT5038T
LT5017ED
Number
of dots
Radiation color Model No.
15 5 -20 to +60 -20 to +80
-20 to +80
-20 to +80
-20 to +70
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +80
-20 to +60
-20 to +60
-20 to +60
-20 to +60
-20 to +70
-20 to +70
-20 to +60
-20 to +60
-20 to +60
-20 to +60
-20 to +60
-20 to +60
-20 to +60
-20 to +60
-20 to +60
-20 to +60
-20 to +60
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5/5
5
1.45
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
1.45
1.45
1.45
1.45
1.45
1.45
1.45/1.45
1.45
50*2
Anode common*
1
Cathode common*
1
50*2
50*2
50*2
50*2
50*2
50*2
50*2
50*2
50*2
80*3
80*3
80*3
50*2
80*3
80*3
50/50*3
80*3
15
15
15
15
20
20
20
15
15
15
15
15
15
15
15
15/15
15
12.7
✕
17.8
5✕7
8✕8
16✕16
20✕20
40✕40
96✕96
30.2
✕
30.2
31.9
✕
31.9
31.7
✕
31.7
31.8
✕
31.8
Yellow-green/Red
Yellow-green/Red
Yellow-green/Red
Red(High-luminosity)
Red(High-luminosity)
Red
Red
Yellow-green
Sunset orange
Red
Red
Red(High-luminosity)
Sunset orange
Sunset orange
Yellow-green/Red(High-luminosity)
Yellow-green/Red(High-luminosity)
Yellow-green/Red
Red(High-luminosity)
(Ta=25˚C)
Forward current
IF
(mA)
Outline
dimensions
(mm)
Peak forward current
IFM
(mA)
Derating factor
(mA/˚C)
Pulse
Reverse voltage
VR
(V)
Operating temperature
Topr.
(˚C)
Storage temperature
Tstg.
(˚C)
■ Absolute Maximum Ratings Figures shown below are values per dot.
*
Each figure shown in the table is yellow-green/red.
*1
Common pins show row.(Column row)
*2
I
FM
=50mA
*3
I
F
=10mA
LT5026ED
LT5037T
LT5010T
LT5010D
LT5106D
LT5106S
LT5106E
LT5105D
LT5105E
LT5007ED
LT5008D
LT5014D
LT5014S
LT5005S
LT5040ET
LT5005T
LT5013T
LT5050ET
LT5027ED
LT5038T
LT5017ED
2.4/2.2
2.4/2.2
1.85
1.85
3.0 (4.5) 660 20 50 100 4
4
4
4
4
4
4
4
4
4
4
4
4
3
4
4
3
4
10
10
10
10
10
10
10
10
10
10
10
10
100
10
10
100
10
50
50
50
50
10
10
10
50
50
50
35
50
50
50
50
10
50
30/35
30/35
20
35
35
35
30
30/35
35
20
50
35
30/20
20
35
30/20
30/35
565/635
565/635
660
635
635
610
565
565/635
635
660
635
610
565/660
660
610
565/660
565/635
1.9/1.6
2.5/2.0
2.2
1.11
1.11
1.11
1.69
2.08/1.56
2.03
1.35
1.3
1.11
1.45/1.70
1.78
1.11
(1.9)/(3.0)
7.15/5.85
3.0
3.0
2.3
2.7
2.7
2.7
2.7
3.0/2.7
3.0
3.0
3.0
3.0
3.0
3.0
2.7
3.0
3.0
2.2
2.2
2.2
2.4
2.2
1.85
2.2
2.2
1.85
2.2
2.4/2.2
2.4/1.85
2.4/1.85
2.4/2.2
12.7
✕
17.8
5✕7
8✕8
16✕16
20✕20
40✕40
96✕96
30.2
✕
30.2
31.8
✕
31.8
31.9
✕
31.9
31.7
✕
31.7
Luminous intensity
*3
IV (mcd)
TYP.
TYP. MAX.
Forward voltage
*2
VF(V)
Peak emission wavelength
λp(nm)
TYP.
Spectrum radiation bandwidth
∆λ(nm)
TYP. IF
(mA) VR
(V)
Reverse current
IR(µA)
MAX.
(Ta=25˚C)
*
*
*
*
*
*
Number
of dots
Radiation color Model No.
Anode common*
1
Cathode common*
1
Outline
dimensions
(mm)
Yellow-green/Red
Yellow-green/Red
Yellow-green/Red
Red(High-luminosity)
Red(High-luminosity)
Red
Red
Yellow-green
Sunset orange
Red
Red
Red(High-luminosity)
Sunset orange
Sunset orange
Yellow-green/Red(High-luminosity)
Yellow-green/Red(High-luminosity)
Yellow-green/Red
Red(High-luminosity)
■ Electro-optical Characteristics Figures shown below are values per dot.
Dot Matrix LED
186
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Dot Matrix LED
Outline Dimensions(Unit:mm)
P2.54✕6=15.24
P2.54✕4=10.16
12.7 ±0.3
17.78 ±0.4
35-ø2.0
P2.54✕5=12.7
6.6 4.6
7.62
1.0
2.0
0.4512-ø +0.15
-0
2.0
6
5
4
9
2
11
12
871031
Internal connection diagram
LT5037T
6
5
4
9
2
11
12
871031
LT5038T
P
I
N
1
6
P
I
N
12
7
24-ø0.45
7.5
7.5 7.5
7.5 4-ø4.0MAX
0.4MAX
Calking
Calking
20
Column
1
18
17 24
8
5
6
13
Row
5
B
8
1
64-❏1.9
P2.5✕7=17.5
P2.0✕7=14
P2.5✕7=17.5
+0
-0.4
20 +0
-0.4
9
10
Internal connection diagram
11
12
13
14
15
16
117 218 319 420 21 522 623 724 8
Row 1
Row 2
Row 3
Row 4
Row 5
Row 6
Row 7
Row 8
Column 1
Column 2
Column 3
Column 4
Column 5
Column 6
Column 7
Column 8
I Do t
169
Red
Yellow-green
P2.5✕7=17.5
20.0+0
-0.4
Column
18
P2.5✕7=17.5
20.0+0
-0.4
Row
81
64- 1.8
ø
0.4
1.0 3.0
P2.0
✕
7=14.0
6.0+1.0
-0.5
0.45
ø
24-
5.05.0 7.57.5
7.57.5 4-ø4.0MAX.
Calking
MAX.
Calking
9
10
Internal connection diagram
11
12
13
14
15
16
117 218 319 420 21 522 623 724 8
Row 1
Row 2
Row 3
Row 4
Row 5
Row 6
Row 7
Row 8
Column 1
Column 2
Column 3
Column 4
Column 5
Column 6
Column 7
Column 8
I Do t
9
1
17
16
8
24
Red
Yellow-green
16-ø0.45
Column1 Column8
18
12
10
13
14
5
4
1
3
12
10
13
14
5
4
1
3
217156 8119 18 217 15 6 8 11 9
Row1
PIN.18
PIN.1 9
10
2.7 4-C0.4
(For all 64 pcs.)
2.7
Row8
3.81✕7=26.67
2.54✕8=20.32
3.81✕7=26.67
22.860.05
8.0
1.0
4.5
1.95
0.05
1.95
30.2±0.2
30.2±0.2
Internal connection diagramInternal connection diagram LT5105❏ SeriesLT5010❏ Series/LT5106❏ Series
Dot shows PIN1
LT5037T/LT5038T LT5017ED
12
34
LT5027ED LT5010❏ Series LT5105❏ Series/LT5106❏ Series
187
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Dot Matrix LED
Dot Matrix LED
Outline Dimensions(Unit:mm)
16-ø0.55
Direction of Pin1
64-ø3.0
4-ø1.5
4.0✕7=28.0 3.0 1.0
6.0
2.0
8.0
18
16 9
24.0
24.0
16.0
2.54✕7=17.78
4.0✕7=28.0
31.8±0.2
31.8±0.2
11 Row 1
9 Row 2
12 Row 3
13 Row 4
5 Row 5
4 Row 6
1 Row 7
3 Row 8
16 2 6 7 815 14 10
COLUMN1
COLUMN2
COLUMN3
COLUMN4
COLUMN5
COLUMN6
COLUMN7
COLUMN8
LT5008D
Internal connection diagram
256-ø1.4
1.95 7.5
2.0
2.5
1.0
8.0
8.0
14.0
14.0
1.0
2.0
2.0 2.0
2.0
12.0
12.0
10.0
10.010.0
10.0
1.95
1.95
1.95
4-ø3.0
2.0✕13=26.0
2.0✕13=26.0
2.0✕7=14.0
18
916
32 25
24 17
31.9±0.2
31.9±0.2
Column1
Internal connection diagram
LT5013T
LT5014❏
Column16
Column1 Column16
30
18
32
28
20
26
22
25
9
6
10
4
12
16
2
14
Row1
Row16
Row1
Row16
24 1 31 3 29 5 27 7 23 11 21 13 19 15 17 8
30
18
32
28
20
26
22
25
9
6
10
4
12
16
2
14
24 1 31 3 29 5 27 7 23 11 21 13 19 15 17 8
24-ø0.55
Direction of Pin1
4-ø1.5
4.0✕7=28.0 3.0 1.0
6.0
2.0
8.0
112
14 13
24.0
24.0
16.0
2.54✕11=27.94
LT5007ED -
4.0✕7=28.0
31.8±0.2
31.8±0.2
: 1 dot
Red
Yellow-green
Internal connection diagram
LT5007ED
64-ø 3.0
13
14
15
16
4
3
2
1
24 2322 2120 19 18 17 6 5 8 7 10 9 12 11
13
14
15
16
4
3
2
1
24 2322 2120 19 18 17 6 5 8 7 10 9 12 11
LT5008ED
P2.0✕15=30.0
31.7±0.3
P2.0✕15=30.0
31.7±0.3
265- 1.6
ø
2.0
P2.0✕14=28.0
6.0
0.45
ø
48-
3.8
Cover case
14.0
(24.0)
(24.0) 4- 4.0
ø
Calking
13
10.0
4- 1.0
ø
Spacer
14 18 23 2419
111
25 26 30 35 3631
37 47 48
2
Internal connection diagram
Green
Red
25 31 32 33 34 35 26 36
13 23 14 15 16 17 18 24
7
5
3
20
8
19
1
2
6
4
21
9
22
11
10
12
37
41
30
40
39
38
27
28
48
42
43
29
47
46
45
44
MAX.
6 7 12
LT5008❏ Series LT5007ED/LT5008ED
56
78
LT5013T/LT5014❏ Series LT5040ET
188
Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Dot Matrix LED
Outline Dimensions(Unit:mm)
256-ø1.8
32-ø0.5
4-ø4.0MAX
4-ø1.2
4-ø1.1
LT5005D
40.0MAX
40.0MAX
0.5MAX
39.8MAX
2.42.4
3.05.7
30.0 15.015.0
30.0 15.015.0
12.5
7.5
Pin1 8
32
17
16
9
24
25
10.0
10.0
10.0
10.0
7.5
10.0
10.0
2.0
1.0t
2.42.4
Column
1Column
16
Row1
Row16
Pin
24
Pin25
Pin1
Pin9
16
8
32
17
2.5✕13=32.5
2.5✕7=17.5
2.5✕13=32.5
2.5✕7=17.5
Internal connection diagram
LT5005T
LT5005D/S/E
12345 6 7 8 24 23 22 21 20 19 18 17
25
26
27
28
29
30
31
32
16
15
14
13
12
11
10
9
25
26
27
28
29
30
31
32
16
15
14
13
12
11
10
9
12345 6 7 8 24 23 22 21 20 19 18 17
Column1 Column16
Column1 Column16
Row1
Row16
Row1
Row16
Red
Yellow-green
Internal connection diagram
256-ø5.0
48-0.5
96.0MAX 20.7
11.1
7.1
9.7
Row1
Row16
Column 1 Column 16
48
17 32
116
33
P6.0✕15=90.0
4.0✕15=60.0
36.0
96.0MAX
P6.0✕15=90.0
4.0✕15=60.0
84.0
3132
Row
1
Row
16 48
33
18
1516 2 1
17
Column
1
1 dot
Column
16
1.8
39.9
P2.5
✕
13=32.5
2.45 2.45
±0.2
39.9
P2.5
✕
13=32.5
2.45 2.45
±0.2
1.0
1.5
6.0
48- 0.45
ø
256-ø2.0
161Column
1
16
Row
Pin 1 mark
(*10.0)
(15.0) (15.0)
P*2.5
✕
7=*17.5
916
P*2.5✕7=*17.5
(*10.0)
81
(*12.5)
P*2.5
✕
7=*17.5
(10.0)
(*17.45)
(15.0)
(*17.45)
18
32
(*12.5)
17
31
4.95
(*10.0)
P*2.5
✕
7=*17.5
(15.0)
(((*12.5)
*4.95
Calking
33
47
34
48
Internal connection diagram
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
171819202122232425262728293132 3335363738394041424344464748
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1615141312111098
7
654321 Column
Row
3430 45
Green
Red
±0.15
LT5005❏Series LT5050ET
910
11
LT5026ED
115
Application Circuits
NOTICE
●The circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
●Observe the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
●If the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
●Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.
