Ss s 7 6 oC 2 " | 2 | , | 8 | 7 | 6 5 4 3 2 4 2478- **-*k* G8) be f {13.694-25) wareriaL cove WINDING SPEC. 145 -5392.010 (.27)7.0106 THK (1.98) ees A=CHAIN, PER WINDING DETAIL *A Lo 078? (3.56) | =BRASS BLANK=CHAIN, PER WINDING DETAIL *B* Or 140 REF. 3=PHOS BRONZE L=LOOSE PTE + 45%5__| r_ TYP, > OPTION CODE FINSH: ln O z 730 BLANK=AS SHOWN C=CAT EAR OPTION (P909) OVERALL HOT TIN DIP: (0.00254)/.000100 MIN. PTE + -_-= HHe--++ (122) OVERALL TIN: (0.00381)/.000150 MIN, O _ OVER (0.00076)/.000030 MIN. NICKEL (154) OVERALL TIN: (0.00254)/.000100 MIN. 2.36) OVER (0.00127)/.000050 MIN. NICKEL O83 (224) OVERALL MATTE TIN: (0.00508/.000200 MIN. OVER (0.00127)/.000050 MIN. NICKEL (.76) (2.29) (550) SELECT GOLD: (0.00038)/.000015 MIN. 1.83) +030 -030 OVERALL GOLD FLASH: (0.00005)/,000002 MIN. O72 OVERALL NICKEL UNDERPLATE: (0.00076)/.000030 MIN. (7.29) (555) SELECT GOLD: (0.00038)/.000015 MIN. 287 | SELECTIVE GOLD LOCATION OVERALL NICKEL UNDERPLATE: (0.00076)/.000030 MIN. ! / G.30#,76) (558) SELECT GOLD: (0.000761/.000030 MIN. 130#,030 OVERALL GOLD FLASH: (0.00005)/.000002 MIN. } A OVERALL NICKEL UNDERPLATE: (0.00127)/.000050 MIN. + (S61) SELECT GOLD: (0.00076)/.000030 MIN. 4.0 | OVERALL NICKEL UNDERPLATE: (0.001271/.000050 MIN. | 4 16 | + | (S91) SELECT GOLD: (0.00127)/.000050 MIN. | do (.76) ; _ i] (| | OVERALL GOLD FLASH: (0.00005)/,000002 MIN. = mY "030 R. TYP. 2 | OVERALL NICKEL UNDERPLATE: (0.00127)/.000050 MIN. (694, 18) A : .0272,007 SECTION A-A _, (.64) iz BACKGROUND OMITTED BACKGROUND OMITTED 1025 5 = SEE NOTE 6 66) |} G.53) .034 1139 F (6.17) (2,722.08) 2243 1 TO7#.003 GS e380 \\ CUT-OFF DIM. : (.38) aA X 1015 044 \ - MATERIAL: SEE LEGEND = os SECTION AnA 2. FINISH: SEE LEGEND oes gS Ves 3. THIS PART CONFORMS TO PRODUCT SPECIFICATION PS-08-50. ol Zz 4. PACKAGING SPECIFICATION: LOOSE TERMINALS: PER PK-2759-001 CHAIN FORM TERMINALS: NONE c 5. DIMENSIONS GIVEN ACROSS CENTERLINES ARE SYMMETRICAL ABOUT THOSE CAT EAR OPTION CENTERLINES WITHIN HALF THE TOTAL TOLERANCE. 6. (0.86 +0.05)/.034 2,002 IS AN OPTIONAL DESIGN. S55] Jouaity] GENERAL TOLERANCES DHENSION STYLE SCALE | DESIGN UNITS | C] SHIRD. ANGLE 7. CRIMP ACCEPTS 18 TO 24 AWG WIRE WITH (2.79)/.110 MAX. INSULATION DIAMETER. @ 222) |symaois| (UNLESS SPECIFIED) _ ah MN OE ot INCH PROJECTION AND CAN ACCEPT (3,00)/.118 MAX. INSULATION DIAMETER WITH SPECIAL TOOLING. WHERAl, v0 ka mm MME 06/03/86 CRIMP TERMINAL 8 8. TERMINAL FOR USE IN 2139, 3001, 3069, AND 91813 SERIES HOUSINGS WITH (2.54)/.100 MAX. INSULATION DIAMETER, ot 2 +P HECKED EY SATE 4 S 2574, 6422, AND 5239 SERIES HOUSINGS WITH (2.79)/.110 MAX. INSULATION DIAMETER, Ze a2 _|5/ 7-0 [ZF 025 ATEL 06/03/86 18 TO 24 GA WIRE AND 41695 SERIES HOUSING WITH (3.00)/.118 MAX. INSULATION DIAMETER. Oa eeew TPLACE [0.36 APPROVED BY DATE 9. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 >See |V-O OPA E--- [--- SMITH 2012/03/20 mi . . zH osee ANGULAR +1/2 MATERIAL NO. ee NO. SHEET NO] Q02te DRAFT WHERE APPLICABLE|L_SEE CHART SD-2478 10F 2 <n gu0< EMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX Y1 (ff WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION RNC sODGNH S 6 7 6 6 . 2 1 2 9 6 7 6 5 | | 3 | 2 | 1 s v 2478- |-(4au)e ENG. NO. 2478-1-(550) 2478- |-(555)L 2478- I-C22)L 2478-1-(154) 2478-1-(154)L 2478-IH(224) 2478-1-(56 DL 2478-3-(#ee)e ENG. NO. 2418-3-(555) 2478-3-(154)L 2478-3-(122)L 2478-3-(550)L 2478-3-(59 DL a 7 2478- |C-(emn)e ENG. NO. 2478-1C-(154) 4 3 2478-3C-(emn)e ENG NO 2478-3C-(154) WINDING DETAIL "A" WINDING DETAIL 'B" QUALITY INCH Oc] a) V-0 IEC CRIMP TERMINAL & 156 CENTERS 5) 7-0 TEL 1 W=0 ITH SHEET 1 NO: UCP2014-4131 PPER PAPER PAPER INTERLEAF INTERLEAF THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX AND SHOULD NOT BE USED WITHOUT WRITTEN . ad 6 a] . 2 fl 2 9 8 7 5 4 3 2 1