2014-10-16 Micro SIDELED 2808 Datasheet Version 2.4 LW Y1SG Micro SIDELED is a SMT LED with side emission. Due to its low package height it is ideal for applications in limited space environments. Micro SIDELED ist eine SMT LED mit seitlicher Abstrahlrichtung. Aufgrund ihrer niedrigen Bauteilhohe ist sie ideal fur Anwendungen mit begrenztem Raum. Features: Besondere Merkmale: * Package: white SMT package, colored diffused silicone resin * Technology: InGaN on Sapphire * Viewing angle at 50 % IV: 120 * Color: Cx = 0.30, Cy = 0.28 acc. to CIE 1931 (white); CTR = 8200 K * Optical efficiency (typ.): 45 lm/W (white) * Gehausetyp: weies SMT Gehause, farbiger diffuser Silikon-Verguss * Technologie: InGaN on Sapphire * Abstrahlwinkel bei 50 % IV: 120 * Farbe: Cx = 0.30, Cy = 0.28 nach CIE 1931 (wei); CTR = 8200 K * Optischer Wirkungsgrad (typ.): 45 lm/W (wei) Applications Anwendungen * Backlighting * Coupling into light guides * Signal and Symbol Luminary * Hinterleuchtung * Einkopplung in Lichtleiter * Signal- und Symbolleuchten 2014-10-16 1 Version 2.4 LW Y1SG Ordering Information Bestellinformation Type: Luminous Intensity Ordering Code 1) page 22 Lichtstarke 1) Seite 22 Typ: Bestellnummer IF = 20 mA IV [mcd] LW Y1SG-AEBE-EKFM-1 1000 ... 1600 Q65110A9541 LW Y1SG-AEBE-GKJM-1 1000 ... 1600 Q65110A9542 LW Y1SG-AFBF-EKFM-1 1200 ... 1800 Q65110A9543 LW Y1SG-AFBF-GKJM-1 1200 ... 1800 Q65110A9544 LW Y1SG-BFCF-EKFM-1 1600 ... 2200 Q65110A9545 LW Y1SG-BFCF-GKJM-1 1600 ... 2200 Q65110A9546 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LW Y1SG-AFBF-EKFM-1 means that only one group AF, BE, BF will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where color chromaticity coordinate groups are measured and binned, single groups will be shipped on any one packing unit. LW Y1SG-AFBF-EKFM-1 means that the device will be shipped within the specified limits. In order to ensure availability, single color chromaticity groups groups will not be orderable. In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. LW Y1SG-AFBF-EKFM-1 means that only one forward voltage group 4,5 will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 5). Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LW Y1SG-AFBF-EKFM-1 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen AF, BE, BF enhalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Farbortgruppe geliefert. Z.B. LW Y1SG-AFBF-EKFM-1 bedeutet, dass in einer Verpackungseinheit nur eine der Farbortgruppen enthalten ist. LW Y1SG-AFBF-EKFM-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Farbortgruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. LW Y1SG-AFBF-EKFM-1 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen 4,5 enthalten (siehe Seite 5). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. 2014-10-16 2 Version 2.4 LW Y1SG Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 85 C Storage temperature range Lagertemperatur Tstg -40 ... 100 C Junction temperature Sperrschichttemperatur Tj 95 C Forward current Durchlassstrom (TA = 25 C) IF 30 mA Surge current Stostrom (t 10 s; D = 0.005; TA = 25 C) IFM 300 mA Reverse voltage Sperrspannung (TA = 25 C) VR not designed for reverse operation V 2 kV ESD withstand voltage VESD ESD Festigkeit (acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class 2) 2014-10-16 3 Version 2.4 LW Y1SG Characteristics (TA = 25 C; IF = 20 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Chromaticity coordinates acc. to CIE 1931 (typ.) (typ.) Cx Cy 0.3 0.28 - Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2 120 Forward voltage 3) page 22 Durchlassspannung 3) Seite 22 (min.) (typ.) (max.) VF VF VF 2.90 3.30 3.60 V V V IR not designed for reverse operation 2) page 22 Farbkoordinaten nach CIE 1931 2) Seite 22 Reverse current Sperrstrom Temperature coefficient of VF Temperaturkoeffizient von VF (-10C T 100C) (typ.) TCV -4.00 mV/K Temperature coefficient of x Temperaturkoeffizient von x (-10C T 100C) (typ.) TCx -0.2 10-3/K Temperature coefficient of y Temperaturkoeffizient von y (-10C T 100C) (typ.) TCy -0.2 10-3/K Real thermal resistance junction / ambient (max.) Rth JA real 460 K/W (max.) Rth JS real 240 K/W 4) page 22 , 5) page 22 Realer Warmewiderstand Sperrschicht / Umgebung 4) Seite 22 , 5) Seite 22 Real thermal resistance junction / solder point 5) page 22 Realer Warmewiderstand Sperrschicht / Lotpad 5) Seite 22 Note: Individual forward voltage groups see next page Anm.: Durchlassspannungsgruppen siehe nachste Seite 2014-10-16 4 Version 2.4 LW Y1SG Brightness Groups Helligkeitsgruppen Group Luminous Intensity Luminous Intensity 1) page 22 1) page 22 Lichtstarke 1) Seite 22 Lichtstrom 6) Seite 22 (min.) Iv [mcd] (max.) Iv [mcd] (typ.) V [mlm] 1000 1200 3300 Gruppe Lichtstarke AE 1) Seite 22 Luminous Flux 6) page 22 AF 1200 1400 3900 BE 1400 1600 4500 BF 1600 1800 5100 CE 1800 2000 5700 CF 2000 2200 6300 Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered. Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen besteht. Einzelne Helligkeitsgruppen sind nicht bestellbar. Forward Voltage Groups 3) page 22 Durchlassspannungsgruppen 3) Seite 22 Group Gruppe (min.) VF [V] (max.) VF [V] 4 2.90 3.20 5 3.20 3.60 2014-10-16 5 Version 2.4 LW Y1SG Chromaticity Coordinate Groups 2) page 22 Farbortgruppen 2) Seite 22 0.34 + 0.33 Cy 0.32 0.9 520 JM 530 0.8 0.31 540 Cy 510 550 0.7 0.6 GM 490 0.2 0.28 590 600 610 620 630 + 0.3 E 0 0.1 0.2 0.4 0.5 0.6 0.7 0.8 GK FK 0.26 EL 0.25 0.3 HK FM FL EM 0.27 480 470 460 450 0.1 0 GL 580 0.4 JK HL 0.29 570 500 0.5 JL HM 0.30 560 EK 0.24 0.9 Cx 0.33 0.34 0.31 0.32 0.29 0.30 0.28 0.26 0.22 0.27 0.23 Cx OHA02648 2014-10-16 6 Version 2.4 LW Y1SG Color Chromaticity Groups 2) page 22 Farbortgruppen 2) Seite 22 Group Gruppe EK EL EM FK FL FM 2014-10-16 Cx Cy 0.2800 0.2480 0.2880 0.2390 0.2880 0.2620 Group Gruppe FM GK Cx Cy 0.2820 0.2720 0.2870 0.2950 0.2910 0.2870 Group Gruppe HL Cy 0.3020 0.2830 0.3090 0.3050 0.3110 0.2940 0.2950 0.2530 0.2960 0.2760 0.2960 0.3040 0.2720 0.2580 0.3010 0.2650 0.2990 0.2940 0.2800 0.2480 0.3020 0.2830 0.3070 0.3150 0.2820 0.2720 0.3050 0.2720 0.3090 0.3050 0.2880 0.2620 0.2910 0.2870 0.3110 0.2940 0.2720 0.2580 0.2960 0.2760 0.3130 0.2830 0.2750 0.2810 0.2990 0.2940 0.3210 0.3060 0.2820 0.2720 0.3020 0.2830 0.3090 0.3050 GL GM HM Cx JK JL 0.2880 0.2620 0.2870 0.2950 0.3110 0.2940 0.2950 0.2530 0.2910 0.2870 0.3200 0.3170 0.2960 0.2760 0.2960 0.3040 0.3210 0.3060 0.3010 0.2650 0.2990 0.2940 0.2820 0.2720 0.3020 0.2880 0.2620 0.2910 0.2870 0.2960 0.2760 0.2750 0.2810 HK HL 0.3070 0.3150 0.2830 0.3090 0.3050 0.3050 0.2720 0.3190 0.3280 0.3110 0.2940 0.3200 0.3170 0.3130 0.2830 0.2990 0.2940 7 JM Version 2.4 LW Y1SG Group Name on Label Gruppenbezeichnung auf Etikett Example: AF-EK-4 Beispiel: AF-EK-4 Brightness Helligkeit Chromaticity Coordinate Farbort Forward Voltage Durchlassspannung AF EK 4 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. 2014-10-16 8 Version 2.4 LW Y1SG Relative Spectral Emission - V() = Standard eye response curve 6) page 22 Relative spektrale Emission - V() = spektrale Augenempfindlichkeit 6) Seite 22 Irel = f (); TA = 25 C; IF = 20 mA OHL02380 100 % I rel 80 V 60 40 20 0 400 450 500 550 600 650 700 nm 750 Radiation Characteristics 6) page 22 Abstrahlcharakteristik 6) Seite 22 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2014-10-16 0.8 0.6 0.4 0 20 9 40 60 80 100 120 Version 2.4 LW Y1SG Forward Current 6) page 22 Durchlassstrom 6) Seite 22 IF = f (VF); TA = 25 C IF 10 2 mA Relative Luminous Intensity 6) page 22 , 7) page 22 Relative Lichtstarke 6) Seite 22 , 7) Seite 22 IV/IV(20 mA) = f(IF); TA = 25 C OHL02743 OHL02386 10 1 IV I V (20 mA) 10 0 10 1 5 10 0 2.5 2.8 3.1 3.4 3.7 4.0 10 -1 0 10 V 4.6 VF 2014-10-16 5 10 1 mA 10 2 IF 10 Version 2.4 LW Y1SG Relative Forward Voltage 6) page 22 Relative Vorwartsspannung 6) Seite 22 VF = VF - VF(25 C) = f(Tj); IF = 20 mA VF Relative Luminous Intensity 6) page 22 Relative Lichtstarke 6) Seite 22 IV/IV(25)C = f(Tj); IF = 20 mA OHL02397 0.4 V I V (25 C) 0.3 0.2 1.0 0.1 0.8 0 0.6 -0.1 0.4 -0.2 0.2 -0.3 -60 -40 -20 0 20 40 60 0 -60 -40 -20 0 C 100 20 40 60 C 100 Tj Tj 2014-10-16 OHL02725 1.4 IV 11 Version 2.4 LW Y1SG Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF = f (T) IF OHL03560 35 mA 30 25 TA TS 20 15 10 5 0 TA temp. ambient TS temp. solder point 0 20 60 40 80 C 100 T Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TA = 25 C 0.35 IF A 0.25 0.20 0.15 0.10 Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TA = 85 C OHL02563 t 0.35 IF A tP D = TP IF T t D = TP IF T 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2014-10-16 OHL02564 tP tp 12 Version 2.4 LW Y1SG Package Outline 8) page 22 Mazeichnung 8) Seite 22 Approximate Weight: 5 mg Gewicht: 5 mg 2014-10-16 13 Version 2.4 LW Y1SG Recommended Solder Pad 8) page 22 Empfohlenes Lotpaddesign 8) Seite 22 Reflow soldering Reflow-Loten 1.4 (0.055) 1 (0.039) 0.9 (0.035) 1.4 (0.055) OHLPY944 Note: For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning. Anm.: Um eine verbesserte Lotstellenkontaktierung zu erreichen, empfehlen wir, unter StandardStickstoffatmosphare zu loten. Das Gehause ist fur Ultraschallreinigung nicht geeignet. 2014-10-16 14 Version 2.4 LW Y1SG Reflow Soldering Profile Reflow-Lotprofil Preconditioning: JEDEC Level 4 acc. to JEDEC J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t OHA04612 Profile Feature Profil-Charakteristik Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up rate to preheat*) 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2014-10-16 C 15 s Version 2.4 LW Y1SG 0.24 (0.009) Cathode 8 (0.315) 2 (0.079) 3.5 (0.138) 4 (0.157) 1.5 (0.059) 2.9 (0.114) 1.75 (0.069) Taping 8) page 22 Gurtung 8) Seite 22 Anode 1.32 (0.052) 1.09 (0.043) 4 (0.157) OHAY2128 2014-10-16 16 Version 2.4 LW Y1SG Tape and Reel Gurtverpackung 8 mm tape with 2000 pcs. on 180 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm Tape dim ensions in m m W P0 P1 P2 D0 E F 8 + 0.3 4 0.1 2 0.05 or 4 0.1 2 0.05 1.5 0.1 1.75 0.1 3.5 0.05 Reel dimensions in mm Reel dim ensions in m m A W Nmin W1 W2max 180 8 60 8.4 + 2 14.4 2014-10-16 17 Version 2.4 LW Y1SG Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto EX A RoHS Compliant (6P) BATCH NO: 1234567890 (1T) LOT NO: 1234567890 BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors MP ML Temp ST X XXX C X (9D) D/C: 1234 Pack: RXX LE DEMY XXX X_X123_1234.1234 X (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print Barcode label L VE l LE k, see labe code blan If bar ). (RH . idity N s IVE RS Otain TO SIT UC TIcon SEN U < RH hum 0% e tive d C/6 kag rela are 30 _ < infr pac of 90% to ak ns ed (pe or rs e). ND Hou rs rs rs Hou and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM pro < time or 23 time at t will C). or l with fact ent MO . Flo time s TO at or at Flo l tica d tha or ival ure nth OP Flo 4 if: rea w Flo labe mo ices iden 5 ced equ el n e 5a is el ing, belo or 24 pro 6 Lev e dev : el cod e , unt whe Lev el re ow, see bag Lev l dat re mo bak bar ned Lev refl istu 10% re led time sea for istu ore> re ope e Mo see istu k, is or . sea is has k, Mo bef istu d 033 Mo in Flo RH blan Mo or-p blan in bag Car ing, r TDlife (if If with t. r lf 10%bak or J-S thisvapp. Yea _ eks rs < r ed icat med, C 1 Yea tem She ow, at uire not > y 1 WeHou unt DE Afte Ind 4 uire refl is red req bod Mo /JE time 168 req : 2b a) Sto ices idity time or is IPC or time b) ned Flo or Hum ing ce time or Dev 2a e Flo a) ope or 3. b) bakren Flo 1 l dat Flo If 2 refe time el 2a 4. el sea 3 Lev el and Lev el re Bag e Lev re Lev istu Dat re istu re Mo istu Mo istu Mo Mo A C 1. 2. M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2014-10-16 18 Version 2.4 LW Y1SG Transportation Packing and Materials Kartonverpackung und Materialien Barcode label DE MY 8 1 T6 PL 76 R1 Q- lti LS TO Y 1+ POU GR (G) Mu : 01 (9D ) D/C 21 00 21 99 8 : 4 20 Y: 23 LO (X) PR OD NO ) 11 00 (1T QT (Q) H Se 3G H1 BA TC ) : 12 (6P 5 NO T 14 2 O SR mi AM co nd O uc pt to o rs NO ). : see labe 44 l k, N O TI U A C 00 L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con s UR ces 24 6 dat e MIC 40 be tim C e ThiISTSE pro < tory tim . or t with 23 tim e at t will C) or fac MO . Flo al len tim s TO at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re tim sea for istu ore> re ope e Mo see 3 istu is or . sea is has Mo nk, bef istu , nk, Flo rd -03 Mo in RH bla Mo or-p bla in bag ingCa r TD life (if If with t. r lf vapp. 10%baktor J-S this Yea , _ eks < r ed ica med, C 1 urs Yea tem She ow at uire not > y 1 WeHo unt DE Afte Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim s 168 req : e 2b a) Sto tim or mid is IPC tim e vice or b) ned Flo or Hu tim ing ce or De e 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev el and Lev el re Bag te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo P: Muster ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label DE MY 1 T6 PL 76 R1 8 lti LS TO Y Mu 1+ Q- P: PGR (G) 44 : 01 D/C ) (9D 20 00 QT Y: : LO (1T ) : NO OD Packing Sealing label Dimensions of transportation box in mm Width / Breite Length / Lange Height / Hohe 200 5 195 5 30 5 2014-10-16 M RA OS (X) PR 5 14 2 110 0 (Q) ico AM nd O uc pt to o rs SR NO 23 4 m O H H1 Se 3G TC 998 NO ) : 12 BA 021 T (6P 210 OU Muster ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: led 19 OHA02044 Version 2.4 LW Y1SG Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Exempt group (Expositionsdauer 10000 s). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporar eingeschranktes Sehvermogen oder auch Nachbilder zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. Subcomponents of this LED are silverplated. Silver is discoloring when being exposed to environments containing high concentrations of aggressive substances. Corroded silver may lead to a worsening of the optical performance of the LED and can in the worst case lead to a failure of the LED. Do not expose this LED to aggressive atmospheres. Note, that corrosive gases may as well be emitted from materials close to the LED in the final product. Einzelkomponenten dieser LED sind silberbeschichtet. Silberoberflachen werden durch korrosive Substanzen verandert. Korrodiertes Silber kann zu einer Verschlechterung der optischen Eigenschaften und im schlimmsten Fall zum Ausfall der LED fuhren. Diese LED darf aggressiven Bedingungen nicht ausgesetzt werden. Es ist zu beachten, dass korrosive Gase auch von Materialien emittiert werden konnen, die sich im Endprodukt in unmittelbarer Umgebung der LED befinden. For further application related informations please visit www.osram-os.com/appnotes Fur weitere applikationsspezifische Informationen besuchen Sie bitte www.osram-os.com/appnotes 2014-10-16 20 Version 2.4 LW Y1SG Date of Change: 2012-10-21 Revision Date: 2014-10-16 Version Subjects Date of change 1.2 OS-IN-2007-021 2007-10-19 2.0 OS-PCN-2009-025-A 2009-09-22 2.1 OS-IN-2012-005 2012-04-19 2.2 Package drawing updated 2012-08-30 2.3 Operating temperature updated 2012-10-21 Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2014-10-16 21 Version 2.4 LW Y1SG Glossary Glossar 1) Brightness: Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 1) Helligkeit: Helligkeitswerte werden mit Stromeinpragedauer von 25 ms und Genauigkeit von 11% ermittelt. 2) Chromaticity coordinate groups: Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01. 2) Farbortgruppen: Farbortgruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0,01 ermittelt. 3) Forward Voltage: Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. 3) Durchlassspannung: Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 4) Thermal Resistance: RthJA results from mounting on PC board FR 4 (pad size 16mm per pad) 4) Warmewiderstand: RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16mm je pad) 5) Thermal Resistance: Rth max is based on statistic values (6). 5) Warmewiderstand: Rth statistischen Werten (6). 6) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 6) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 7) Relative Brightness Curve: In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 7) Relative Helligkeitskurve: Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 8) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with 0.1 and dimensions are specified in mm. 8) Matoleranz: Wenn in der Zeichnung nicht anders angegeben, gilt eine Toleranz von 0,1. Mae werden in mm angegeben. 2014-10-16 22 max basiert einer einer auf Version 2.4 LW Y1SG Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2014-10-16 23