TANFILM(R) CHIP CARRIER RESISTOR NETWORK ISO-9001 Registered CCN SERIES Lid and ceramic substrate totally filled with epoxy adhesive * * * * * * Qualified DESC 87017 and 87018 Increased component density Ideal for all reflow soldering techniques Best tolerances: 0.02% absolute 0.01% ratio Custom schematics readily available Meet JEDEC standard for type 'C' package * Superior temperature performance: Absolute T.C. to 10 ppm/C Tracking 5 ppm/C standard (2% ppm/C available) The IRC TaNFilm(R) Chip Carrier Network offers higher lead density, increased component count, lower installed resistor cost, better reliability, and is ideal for use with all surface mount solder techniques. In addition, the TaNFilm(R) leadless Chip Carrier Network provides all the unique qualities of our other TaNFilm(R) package configurations. Testing has demonstrated performance exceeding MIL-PRF-83401 Characteristic H. Precise state-of-the-art laser trimming provides close tolerances and tight ratios. The TaNFilm(R) process enables IRC to manufacture custom circuit configurations and multiple resistance values without sacrificing the tightest tolerance and tracking characteristics of precision networks. The Tantalum Nitride resistor material is passivated for environmental protection surpassing military requirements and guaranteeing exceptional ratio stability. For applications requiring a high degree of reliability, stability, accuracy and low noise, plus advantages of new resistor configuration, specify the IRC Leadless Chip Carrier Configuration Resistor Network. Meets JEDEC Standard for Type "C" Package Custom circuits and Special Testing Available Contact factory for any special features required Gold over nickel over copper termination (solder coating available) Ultra stable Tantalum Nitride SPECIFICATIONS Resistance Ranges (S S) 10 to 300K Resistance Tolerances (%) 0.05, 0.1, 0.25, 0.5, 1, 2 (0.02 available) Ratio Accuracy when specified to 0.01% Power Rating @ 70C 0.1 watt/resistor, 1.0 watt/network Temperature Range -55C to +150C Temperature Coefficient of Resistance (ppm/C) 15, 25, 50, 100 TCR Tracking (R>200S S) 5 ppm/C Noise Less than -25 db Terminations Gold over nickel over copper. Solder tinned available. Lead Material Gold plated copper alloy Solder tin available 99.5% pure alumina substrate Substrate Material Ceramic chip/epoxy/ceramic Construction STANDARD CIRCUIT 18 17 16 15 18 14 17 16 15 14 18 17 16 15 18 14 17 16 15 14 19 13 19 13 19 13 19 13 20 12 20 12 20 12 20 12 1 11 1 11 1 11 1 11 2 10 2 10 2 10 2 10 3 9 3 9 3 9 3 9 4 5 6 7 8 7900 ONE PIN COMMON 4 5 6 7 8 7907 ISOLATED 4 5 6 7 8 7908 ISOLATED 4 5 6 7 8 7909 ISOLATED ADVANCED FILM DIVISION 4222 South Staples Street * Corpus Christi, Texas 78411 * Tel: 512-992-7900 * Fax: 512-992-3377 * www.irctt.com 110398 ISO-9001 Registered CCN PERFORMANCE DATA MIL-PRF-83401 Limits () )R%) Test Per MIL-PRF-83401 M 0.7 Thermal Shock and Power Conditioning K 0.7 H 0.5 TaNFilm Test Data () )R%) V 0.25 Max 0.1 Typical 0.02 Low Temperature Operation 0.5 0.25 0.1 0.1 0.05 0.02 Short Term Overload 0.5 0.25 0.1 0.1 0.05 0.02 Terminal Strength 0.25 0.25 0.25 0.1 0.1 0.02 Resistance to Solder Heat 0.25 0.25 0.1 0.2 0.1 0.03 Moisture Resistance 0.5 0.5 0.4 0.25 0.1 0.03 Shock 0.25 0.25 0.25 0.25 0.1 0.03 Vibration 0.25 0.25 0.25 0.1 0.1 0.03 Life 2.0 0.5 0.5 0.1 0.1 0.03 High Temperature Exposure 1.0 0.5 0.2 0.1 0.1 0.03 Low Temperature Storage 0.5 0.25 0.1 0.1 0.05 0.01 25C Double Load 2.0 0.5 0.5 0.1 0.05 0.03 DIMENSIONS (Inches and (mm)) 0.025" .003 0.015" X 45 0.035" x 45 3 places 0.050" Typ 0.050" Typ 0.200" Typ 0.025" .003 0.350" .008 0.290" .010 0.085" 0.018" Typ 0.075" .010 HOW TO ORDER CCN - 7900 - 01 - 1001 - B - B Sample Part No.: Family Ratio Tolerance to R1 (if specified) Model 7900: 19 7907: 10 7908: 10 7909: 10 resistor, resistor, resistor, resistor, pin #20 common, min. 20 ohms, 100K ohms (std.) isolated resistors, min. 50 ohms, 200K ohms (std.) isolated resistors, min. 50 ohms, 200K ohms (std.) isolated resistors, min. 50 ohms, 200K ohms (std.) Characteristic Code 01 02 03 04 05 06 07 Classification Commercial Grade Commercial Grade Commercial Grade Military Screening Military Screening Military Screening Military Screening TCR (ppm/C) 100 50 25 300 100 50 25 Absolute Tolerance Absolute/Ratio Tolerance Code A=0.05%; B=0.1%; C=0.25%; D=0.5%; F=1.0%;G=2.0%; Resistance Standard MIL Resistance Code. Example: 1001 = 1000 ohms ADVANCED FILM DIVISION 4222 South Staples Street * Corpus Christi, Texas 78411 * Tel: 512-992-7900 * Fax: 512-992-3377 * www.irctt.com 110398