Mini-Circuits - Specification for Transformer - T2.5-6T
RF Transformer
Configuration Type: T2.5-6T
RATIO Frequency
MHz
Insertion Loss Case
Style Conn-
ection
3 dB
MHz 2 dB
MHz 1 dB
MHz
2.50 0.01-100 0.01-
100 0.02-
50 0.50-
20 W38 ev
Pin Connections
Port Primary
Dot Primary Primary
CT Second-
ary Dot Second-
ary Second-
ary CT Gnd
Ext. Case
Gnd Not
Used
ev 4 6 - 3 1 2 - - 5
Case Style - W38 (inch,mm ) weight: 0.5 grams.
A B C D E F G H J
.30
7.620 .27
6.858 .23
5.842 .010
0.254 .042
1.067 .020
0.508 .100
2.540 .05
1.270 .09
2.286
K L M N P Q R S T
.31
7.874 .036
0.914
Tolerance: .x ± .1 .xx ± .03 .xxx ± .015 inch.
Material and Finish:
Case material: plastic. Lead finish: tin-lead plate or tin plate.
Special Tolerances:
Lead width ±.010 inch; lead thickness ±.003 inch.
Notes:
•FOR A AND B CONFIGURATIONS:
Typical Amplitude Unbalance: 0.1 dB over 1 dB frequency range;
0.5 dB over entire frequency range.
Typical Phase Unbalance: 1.0° over 1 dB frequency range; 5.0°
over entire frequency range.
•Absolute power, voltage and current ratings:
RF input power: 0.25 Watt rating
DC current, 30mA.
•Operating temperature range is -20°C to +85°C.
•Impedance ratio = secondary/primary
•Two case styles available: Plug-in case style X65; Radial lead
case style W38.
•Insertion loss referenced to mid-band loss
•General Quality Control Procedures and Environmental
Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
•Prices and Specifications subjects to change without notice.
FREQ.
(MHz) Insertion
Loss(dB) Input Return
Loss(dB)
0.010 2.71 1.70
0.020 1.14 4.46
0.050 0.31 10.63
0.099 0.18 16.39
0.500 0.18 26.01
20.000 0.48 10.09
50.000 1.47 4.52
53.667 1.60 4.19
95.264 2.52 2.82
100.000 2.55 2.87
http://www.minicircuits.com/cgi-bin/spec?cat=tranfrmr&model=T2.5-6T&pix=x65_w38.gif&bv=4 (1 of 2) [7/9/2004 8:30:17 PM]
i2 Technologies US, Inc.
HTML Pages converted to PDF Document
This document contain component information from the
manufacturer's website which are not available in a revision
controlled document from the manufacturer. To facilitate the
addition of these parts into the Electronics Database, we are
converting the HTML pages related to that part, from the
manufacturer's website into Adobe PDF format. The contents of this
document is based on the information provided on the
manufacturer's website, therefore the information may have been
changed by the manufacturer since this was created.
Powering the Bottom Line ®
i2 Technologies US, Inc.
15445 Innovation Drive
San Diego, CA 92128
