ACDC 20/40 Watts ECE Series xppower.com * Ultra Compact Size * Single Outputs from 3.3 to 48 V * Encapsulated * PCB & Chassis Mount Versions * <0.3 W No Load Input Power * Peak Load Capability * 3 Year Warranty GREEN*POWER Specification Input General * 85-264 VAC (120-370 VDC) derate load from 100% at 90 VAC to 90% at 85 VAC Input Frequency * 47-63 Hz Input Current * ECE20: 0.3 A rms at 230 VAC ECE40: 0.5 A rms at 230 VAC Inrush Current * 20 A at 115 VAC, 40 A at 230 VAC, cold start at 25 C Power Factor * EN61000-3-2 Class A Earth Leakage Current * Class II construction no earth No Load Input Power * <0.3 W Input Protection * ECE20: Internal T1 A/250 VAC fuse ECE40: Internal T2 A/250 VAC fuse Input Voltage Output Output Voltage Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Line Regulation Load Regulation Transient Response * * * * * * * * * Ripple & Noise * Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient * * * * See tables 1% No minimum load required 2 s max 16 ms max 8 ms minimum at full load & 115 VAC 0.5% max 1% max, 2% max for ECE40US03/05-S 4% max deviation, recovery to within 1% in 500 s for a 25% load change 3.3-5 V versions: 60 mV pk-pk, 3.3-5 V `ECE40-S' versions: 75 mV pk-pk (see note 5), all other models 1% pk-pk max 20 MHz bandwidth 115-140% Vnom, auto recovery 110-180% Trip and restart (hiccup mode) 0.05%/C Efficiency Isolation Switching Frequency Power Density MTBF * * * * See tables 3000 VAC Input to Output 70 kHz typical ECE20: 9.97 W/In3 ECE40: 7.58 W/In3 * >450 kHrs to MIL-HDBK-217F at 25 C, GB Environmental Operating Temperature * -25 C to +70 C, derate linearly from 100% at +50 C to 50% at +70 C Cooling * Convection-cooled Operating Humidity * 95% RH, non-condensing Storage Temperature * -40 C to +85 C Operating Altitude * 3000 m Vibration * 2 g, 10 Hz to 500 Hz, 10 mins/cycle, 60 mins each cycle EMC & Safety Emissions Harmonic Currents ESD Immunity Radiated Immunity * * * * EFT/Burst Surge * * Conducted Immunity Magnetic Fields Dips & Interruptions * * * Safety Approvals * EN55022, level B conducted & radiated EN61000-3-2, EN61000-3-3 EN61000-4-2, level 3 Perf Criteria A EN61000-4-3, 10 V/m 80% mod Perf Criteria A EN61000-4-4, level 3 Perf Criteria A EN61000-4-5, installation Class 3, Perf Criteria A EN61000-4-6, 10 Vrms Perf Criteria A EN61000-4-8, 10 A/m Perf Criteria A EN61000-4-11, 30% for 10 ms, 60% for 100 ms, 100% for 5000 ms Perf Criteria A, B, B EN60950-1, UL60950-1, CSA22.2 No. 234 per cUL Output Power 13.5 20.0 20.0 20.0 20.0 20.0 20.0 35.0 40.0 40.0 40.0 40.0 40.0 40.0 Output Current Output Voltage W W W W W W W W W W W W W W 3.3 5.0 9.0 12.0 15.0 24.0 48.0 3.3 5.0 9.0 12.0 15.0 24.0 48.0 Nominal 4.50 A 4.00 A 2.22 A 1.67 A 1.33 A 0.83 A 0.42 A 9.00 A 8.00 A 4.44 A 3.33 A 2.67 A 1.67 A 0.83 A VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC Efficiency(4) Peak(1) 5.85 A 5.20 A 2.89 A 2.17 A 1.73 A 1.08 A 0.55 A 11.70 A 10.40 A 5.77 A 4.33 A 3.47 A 2.17 A 1.08 A Model Number 73% 77% 83% 82% 83% 82% 86% 73% 77% 80% 84% 84% 85% 86% ECE20US03^ ECE20US05^ ECE20US09^ ECE20US12^ ECE20US15^ ECE20US24^ ECE20US48^ ECE40US03(2)(3)^ ECE40US05(2)(3)^ ECE40US09(2)(3)^ ECE40US12(2)(3)^ ECE40US15(2)(3)^ ECE40US24(2)(3)^ ECE40US48(2)(3)^ Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal power. 2. Add suffix -S to model number to denote chassis mount with screw terminal type, e.g. ECE40US12-S. Only available with ECE40 models. 3. A screw terminal versions (-S) is available with DIN Clip attached. Add suffix `D', e.g. ECE40US24-SD. DIN Rail mounting clip is available as a separate item, order code ECL25/30 DIN CLIP. 4. Average of efficiencies measured at 25%, 50%, 75% & 100% load with 230 VAC input. 5. 3.3 & 5 V ECE40-S versions meet 75 mV pk-pk with 20 MHz bandwidth and 0.1 F capacitor across output terminals. Available from Farnell & element14. See pages 284-290. ^ Available from Newark. See pages 291-296. Mechanical Details ECE20 ECE40 0.80 0.01 (20.3 0.3) 3.10 (78.7) 0.13 (3.4) 0.13 (3.2) 0.40 0.01 (10.1 0.3) ACN +Vo ACN TOP VIEW 1.07 (27.2) 1.50 (38.1) -Vo 0.59 (15.0) 1.18 (30.0) TOP VIEW -Vo ACL 0.16 (4.1) 1.80 0.01 (45.7 0.3) 2.06 (52.4) ACL 0.13 (3.4) +Vo 2.85 (72.4) 0.91 (23.0) 1.10 (27.9) 4x o 0.04 (o1.0) 4 x o0.04 (o1.0) 0.39 (10.0) 0.39 (10.0) ECE40 Screw Terminal (S) 3.43 (87.0) 4x o0.14 (4x o3.5) 0.44 (11.2) TOP VIEW ACN 1.57 (40.0) ACL -Vo 0.84 (21.3) 1.20 +Vo (30.5) 3.01 (76.4) 0.39 (10.0) Notes 1. All dimensions in inches (mm). 2. Weight: ECE20: 0.13 lbs (60 g) ECE40: 0.33 lbs (150 g) ECE40 Optional Screw Terminal: 0.37 lbs (170 g) 3. Tolerances: x.xx = 0.02 (x.x = 0.5), x.xxx = 0.01 (x.xx = 0.25) 1 1.12 (28.5) 0.27 (6.8) 0.10 (2.5) 3.78 (96.0) Optional DIN clip 31-Mar-11 ACDC ECE20/40 Models and Ratings