ALT32683A - 2-Power - Datasheet.Directory

industrial.panasonic.com/ac/e/ ASCTB102E 201903

2019.03

ORDERING INFORMATION

TYPICAL APPLICATIONS

FEATURES

RA RELAYS (ARA)

1 GHz capable,

3 W carrying power

(at 1 GHz), 50Ω impedance

and 2 Form C relays

1. High frequency characteristics

(Impedance 50Ω, ~1.0GHz)

• Insertion loss; Max. 0.3dB

• Isolation; Min. 20dB

(Between open contacts)

Min. 30dB

(Between contact sets)

• V.S.W.R.; Max. 1.2

2. Surface mount terminal

This relay is a surface-mounted model

with excellent high-frequency

properties. In addition, it can use a

microstrip line in the base circuit

design which spares the labor of

machining the base.

3. Low prole small type

9.7(W)×14.7(L)×5.9(H) mm

.382(W)×.579(L)×.232(H) inch

• Measurement market

Oscilloscope attenuator circuit

• Communication market

Antenna switching, All types of wireless

devices

If you consider using applications with

low level loads or with high frequency

switching, please consult us.

Contact arrangement

2: 2 Form C

RA relays

ARA 2 0 A

Operating function

0: Single side stable

1: 1 coil latching

2: 2 coil latching

Type of operation

0: Standard type (B.B.M)

Coil voltage, V DC

1H: 1.5, 03: 3, 4H: 4.5, 05: 5, 06: 6, 09: 9, 12: 12, 24: 24, 48: 48

(H=0.5)

Terminal shape

A: Surface-mount terminal

Packing style

Nil:

Tube packing

Tape and reel packing (picked from 1 pin side)

Tape and reel packing (picked from 10 pin side)

.579 .382

.232

14.7 9.7

5.9 4. High sensitivity: 140 mW nominal

operating power (Single side stable,

2 coil latching)

5. High contact reliability

Electrical life: Min. 107 (10mA 10V

DC)

Protective construction: Sealed type

mm inch

Automation Controls Catalog

RA (ARA)

Panasonic Corporation Electromechanical Control Business Division

industrial.panasonic.com/ac/e/

RATING

1.Coil data

1) Single side stable

• Operating characteristics such as ‘Operate voltage’ and ‘Release voltage’ are inuenced by mounting conditions, ambient

temperature, etc.

Therefore, please use the relay within ± 5% of rated coil voltage.

• ‘Initial’ means the condition of products at the time of delivery.

2) 1 coil latching

Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1-pin side) is also available.

* Square, pulse drive (JIS C5442-1996)

TYPES

1. Tube packing

2. Tape and reel packing

Contact

arrangement Rated voltage Part No. Standard packing

Single side stable 1 coil latching 2 coil latching Tube Case

2 Form C

1.5 V DC ARA200A1H ARA210A1H ARA220A1H

40 pcs. 1,000 pcs.

3 V DC ARA200A03 ARA210A03 ARA220A03

4.5 V DC ARA200A4H ARA210A4H ARA220A4H

5 V DC ARA200A05 ARA210A05 ARA220A05

6 V DC ARA200A06 ARA210A06 ARA220A06

9 V DC ARA200A09 ARA210A09 ARA220A09

12 V DC ARA200A12 ARA210A12 ARA220A12

24 V DC ARA200A24 ARA210A24 ARA220A24

48 V DC ARA200A48 — —

Contact

arrangement Rated voltage Part No. Standard packing

Single side stable 1 coil latching 2 coil latching Tape and reel Case

2 Form C

1.5 V DC ARA200A1HZ ARA210A1HZ ARA220A1HZ

500 pcs. 1,000 pcs.

3 V DC ARA200A03Z ARA210A03Z ARA220A03Z

4.5 V DC ARA200A4HZ ARA210A4HZ ARA220A4HZ

5 V DC ARA200A05Z ARA210A05Z ARA220A05Z

6 V DC ARA200A06Z ARA210A06Z ARA220A06Z

9 V DC ARA200A09Z ARA210A09Z ARA220A09Z

12 V DC ARA200A12Z ARA210A12Z ARA220A12Z

24 V DC ARA200A24Z ARA210A24Z ARA220A24Z

48 V DC ARA200A48Z — —

Rated voltage Pick-up voltage*

(at 20°C 68°F)

Drop-out voltage*

(at 20°C 68°F)

Rated operating current

[±10%] (at 20°C 68°F)

Coil resistance

[±10%] (at 20°C 68°F)Rated operating power Max. allowable voltage

(at 20°C 68°F)

1.5 V DC

75%V or less of

rated voltage

(initial)

10%V or more

of rated voltage

(initial)

93.8 mA

140 mW 150%V of rated voltage

V DC 46.7 mA

64.3

4.5 V DC

145

V DC 28.1 mA

178

V DC 23.3 mA

257

V DC 15.5 mA

579

12 V DC 11.7 mA

1,028

24 V DC 8.3 mA

2,880

Ω200 mW

48 V DC 6.3 mA

7,680

Ω300 mW 120%V of rated voltage

* Square, pulse drive (JIS C5442-1996)

Rated voltage Set voltage*

(at 20°C 68°F)

Reset voltage*

(at 20°C 68°F)

Rated operating current

[±10%] (at 20°C 68°F)

Coil resistance

[±10%] (at 20°C 68°F)Rated operating power Max. allowable voltage

(at 20°C 68°F)

1.5 V DC

75%V or less of

rated voltage

(initial)

75%V or less of

rated voltage

(initial)

46.9 mA

70 mW 150%V of rated voltage

V DC 23.3 mA

128.6

4.5 V DC 15.6 mA

289.3

V DC

357

V DC 11.7 mA

514

V DC 7.8 mA

1,157

12 V DC 5.8 mA

2,057

24 V DC 4.2 mA

5,760

Ω100 mW

3) 2 coil latching

* Square, pulse drive (JIS C5442-1996)

Rated

voltage

Set voltage*

(at 20°C 68°F)

Reset voltage*

(at 20°C 68°F)

Rated operating current

[±10%] (at 20°C 68°F)

Coil resistance

[±10%] (at 20°C 68°F)Rated operating power Max. allowable voltage

(at 20°C 68°F)

1.5 V DC

75%V or less of

rated voltage

(initial)

75%V or less of

rated voltage

(initial)

93.8 mA

140 mW 150%V of rated voltage

V DC 46.7 mA

64.3

4.5 V DC

145

V DC 28.1 mA

178

V DC 23.3 mA

257

V DC 15.5 mA

579

12 V DC 11.7 mA

1,028

24 V DC 8.3 mA

2,880

Ω200 mW

RA (ARA)

Panasonic Corporation Electromechanical Control Business Division

industrial.panasonic.com/ac/e/ © Panasonic Corporation 2018 ASCTB102E 201903

2. Specications

Note: * The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “AMBIENT ENVIRONMENT” in

GENERAL APPLICATION GUIDELINES. Allowable temperature is from –40 to 70°C –40 to 158°F at our standard packing condition.

REFERENCE DATA

1-(1). High frequency characteristics (Impedance 50Ω)

Sample: ARA200A12

Measuring method: Measured by using our PC board for measurement and HP network analyzer (HP8753C).

• V.S.W.R. • Isolation

Characteristics Item Specications

Contact data

Arrangement 2 Form C

Contact resistance (initial) Max. 75mΩ (By voltage drop 6V DC 1A)

Contact material Stationary: AgPd + Au clad, Movable: AgPd

Contact rating (resistive) 10mA 10V DC, 1A 30V DC

Contact input power 3W (at 1GHz, impedance 50Ω, V.S.W.R. max.1.2)

Max. switching voltage 30V DC

Max. switching current 1A (DC)

High frequency

characteristics

(initial) (~1GHz,

Impedance 50Ω)

Isolation Between open contacts Min. 20dB

Between contact sets Min. 30dB

Insertion loss (without D.U.T. board’s loss) Max. 0.3dB

V.S.W.R. Max. 1.2

Insulation resistance (initial) Min. 100MΩ (at 500V DC, Measured portion is the same as the case of dielectric voltage.)

Breakdown voltage

(initial)

Between open contacts 750 Vrms for 1min. (detection current: 10mA)

Between contact sets 1,000 Vrms for 1min. (detection current: 10mA)

Between contact and coil 1,000 Vrms for 1min. (detection current: 10mA)

Between contact and earth terminal 1,000 Vrms for 1min. (detection current: 10mA)

Time

characteristics

Operate [Set] time (initial) Max. 4ms (Approx. 2ms) [Max. 4ms (Approx. 2ms)] (at 20°C 68°F, at rated voltage, without bounce)

Release [Reset] time (initial) Max. 4ms (Approx. 1ms) [Max. 4ms (Approx. 2ms)] (at 20°C 68°F, at rated voltage, without bounce,

without diode)

Mechanical

characteristics

Shock

resistance

Functional Min. 500 m/s2 (half-sine shock pulse: 11ms; detection time: 10µs)

Destructive Min. 1,000 m/s2 (half-sine shock pulse: 6ms.)

Vibration

resistance

Functional 10 to 55 Hz at double amplitude of 3mm (detection time: 10µs)

Destructive 10 to 55 Hz at double amplitude of 5mm

Expected life

Mechanical Min. 108 (at 180 cpm)

Electrical Min. 107 (at 20 cpm) (10mA 10V DC resistive)

Min. 105 (at 20 cpm) (1A 30V DC resistive)

Conditions Conditions for operation, transport and storage* Ambient temperature: –40°C to +85°C –40°F to +185°F

Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)

Unit weight Approx. 2 g .07 oz

1.1

1.0

1.5

1.4

1.2

1.3

300kHz 0.5GHz 1.0GHz

COM-NO

COM-NC

Frequency

V.S.W.R.

0.8

1.0

0.2

0.6

0.4

0.3

300kHz 0.5GHz 1.0GHz

COM-NC

COM-NO

Insertion loss, dB

Frequency

100

300kHz 0.5GHz 1.0GHz

COM-NC

COM-NO

CONTACT sets

Isolation, dB

Frequency

• Insertion loss

RA (ARA)

Panasonic Corporation Electromechanical Control Business Division

industrial.panasonic.com/ac/e/

9.70

0.25

12.90

14.30

Soldering with

PC board earth

(4 ribs)

14.70

2.54

0.50

5.90

7.62

11.50.5

.382

.010

.508

.563

.579

.100

.020

.232

.300

.453.020

DIMENSIONS (mm inch)The CAD data of the products with a CAD Data mark can be downloaded from https://industrial.panasonic.com/ac/e/

CAD Data

PC board pattern

Single side table

(Deenergized condition) (Reset condition)

Tolerance: ±0.3 ±.012

Tolerance: ±0.1 ±.004

Schematic (Top view)

12345

678910

Direction indication

12345

678910

2345

6789

1 coil latching 2 coil latching

(Reset condition)

1-(2). High frequency characteristics (Impedance 75Ω)

Sample: ARA200A12

Measuring method: Measured by using our PC board for measurement and HP network analyzer (HP8753C).

• V.S.W.R. • solation

100

300kHz 0.5GHz 1.0GHz

COM-NC

COM-NO

CONTACT sets

Isolation, dB

Frequency

• Insertion loss

COM-NC

COM-NO

1.0

Frequency

1.2

1.4

1.1

1.3

1.5

300kHz 0.5GHz 1.0GHz

V.S.W.R.

1.0

Frequency

0.6

0.2

0.8

0.4

300kHz 0.5GHz 1.0GHz

Insertion loss, dB

2.00

.079

.012

0.3

14.0

.551 .100

2.54

.039

1.0

Earth

For glue pad

.079

2.0

.116

2.94

14.90

.587

12.40

.488

12.50

.492

8.90

.350 9.56

.376

RA (ARA)

Panasonic Corporation Electromechanical Control Business Division

industrial.panasonic.com/ac/e/ © Panasonic Corporation 2018 ASCTB102E 201903

NOTES

1. Coil operating power

Pure DC current should be applied to the coil. The wave form

should be rectangular. If it includes ripple, the ripple factor

should be less than 5%.

However, check it with the actual circuit since the characteristics

may be slightly di󰀨erent. The nominal operating voltage should

be applied to the coil for more than 10 ms to set/reset the

latching type relay.

2) IR (infrared reow) soldering method

2. Coil connection

When connecting coils, refer to the wiring diagram to prevent

mis-operation or malfunction.

3. External magnetic eld

Since RA relays are highly sensitive polarized relays, their

characteristics will be a󰀨ected by a strong external magnetic

eld. Avoid using the relay under that condition.

4. Cleaning

For automatic cleaning, the boiling method is recommended.

Avoid ultrasonic cleaning which subjects the relays to high

frequency vibrations, which may cause the contacts to stick.

It is recommended that alcoholic solvents be used.

5. Tape and reel packing

1) Tape dimensions

Max. 5°

12.30

.484

16.0

.630

2.0

.079 4.0

.157

11.5

.453

0.4

.016

15.2

.598 6.40.2

.252.008

24.00

.945

RA relay (10.75)

(.423)

1.75

.069

1.5+0.1

.059

dia.

+.004

(General tolerance: ±0.1 ±.004)

2) X type, Z type

Tape coming out direction

Relay polarity bar

X: Picked from 1 pin

Z: Picked from 10 pin

3) Dimensions of plastic reel

24.4+2.0

.961+.079

2.0±0.2

.079±.008

13±0.2 dia.

.512±.008 dia.

.827±.031 dia.

21±0.8 dia.

80±1 dia.

3.150±.039 dia.

330±2 dia.

12.992±.079 dia.

.079±.020

2.0±0.5

6. Soldering

Manual soldering shall be performed under following condition.

Tip temperature: 280°C to 300°C 536°F to 572°F.

Wattage: 30 to 60W

Soldering time: within 5s

In case of automatic soldering, the following conditions should

be observed

1) Position of measuring temperature

Surface of PC board where relay is mounted.

Temperature rise of relay itself may vary according to the

mounting level or the heating method of reow equipment.

Therefore, please set the temperature of soldering portion of

relay terminal and the top surface of the relay case not to

exceed

the above mentioned soldering condition.

It is recommended to check the temperature rise of each

portion

under actual mounting condition before use.

The soldering earth shall be performed by manual soldering.

7. Conditions for operation, transport and storage

conditions

1) Ambient temperature, humidity, and atmospheric pressure

during usage, transport, and storage of the relay:

(1) Temperature:

–40 to +85°C –40 to +185°F

(2) Humidity: 5 to 85% RH

(Avoid freezing and condensation.)

The humidity range varies with the temperature. Use within

the

range indicated in the graph below.

(3) Atmospheric pressure: 86 to 106 kPa

Temperature and humidity range for usage, transport, and

storage:

Humidity, %RH

Tolerance range

(Avoid

condensation

when used at

temperatures

higher than

0°C 32°F)

(Avoid freezing

when used at

temperatures

lower than

0°C 32°F)

850–40 +185+32–40

Temperature, °C °F

2) Condensation

Condensation forms when there is a sudden change in

temperature under high temperature and high humidity

conditions. Condensation will cause deterioration of the relay

insulation.

3) Freezing

Condensation or other moisture may freeze on the relay when

the temperature is lower than 0°C 32°F. This causes problems

such as sticking of movable parts or operational time lags.

4) Low temperature, low humidity environments

The plastic becomes brittle if the relay is exposed to a low

temperature, low humidity environment for long periods of time.

t1t2

T1 = 150 to 180°C

T2 = 230°C

T3 = Within 250°C

302 to 356°F

446°F and higher

482°F

t1 = 60 to 120 sec.

t2 = Within 30 sec.

RA (ARA)

Panasonic Corporation Electromechanical Control Business Division

industrial.panasonic.com/ac/e/

8. Measuring method (50Ω type)

Please refer to "the latest product specications"

when designing your product.

• Requests to customers :

https://industrial.panasonic.com/ac/e/salespolicies/

Connect connectors 1 and 2 respectively to PORT1 and PORT2.

Perform calibration using the 3.5 mm .138 inch calibration kit

(HP85033C).

Material; Glass PTFE

R-4737 (manufactured by our company)

Board thickness; t = 0.8mm .031inch

Copper planting thickness; 18μm (Double sided)

Connector (SMA type)

Product name; R125 403 (RADIALL)

Insertion loss compensation; The insertion loss of relay itself is

given by subtracting the insertion loss of short-circuit the Com

and the NC (or NO). (signal path and two connectors)

No. Product name Contents

HP 11857D 7mm Test port, Extension cable, (APC7connector)

HP 11533A Adapter, APC7-SMA (Male)

After calibration, connect the D.U.T board and measure.

D.U.T. board

Dimensions (mm inch)

Network

Analyzer

S Parameter

Testset

HP 85047AHP 8753C

PORT1

PORT2

OUT

.866

.787

.630

.551

.394

22.0

20.0

16.0

14.0

10.0

5.08

.200

45°

.079

2.0

4.0

2.0

.157

.079

SMA connector to be soldered

25.0

.984

20.0

.787

10.16

.400

2.00

.079

6.0

.236 8.0

.315 12.5

.492

Panasonic Corporation Electromechanical Control Business Division

industrial.panasonic.com/ac/e/ Panasonic Corporation 2019

GUIDELINES FOR MICROWAVE DEVICES USAGE

Precautions for Coil Input

For cautions for use, please read “GUIDELINES FOR RELAY USAGE”.

https://industrial.panasonic.com/ac/e/control/relay/cautions_use/index.jsp

Long term current carrying

A circuit that will be carrying a current continuously for long periods

without relay or microwave device switching operation. (circuits for

emergency lamps, alarm devices and error inspection that, for

example, revert only during malfunction and output warnings with form

B contacts) Continuous, long-term current to the coil will facilitate

deterioration of coil insulation and characteristics due to heating of the

coil itself.

For circuits such as these, please use a magnetic-hold type latching

relay. If you need to use a single stable relay, use a sealed type relay

that is not easily a󰀨ected by ambient conditions and make a failsafe

circuit design that considers the possibility of contact failure or

disconnection.

DC Coil operating power

Steady state DC current should be applied to the coil. The wave form

should be rectangular. If it includes ripple, the ripple factor should be

less than 5%.

However, please check with the actual circuit since the electrical

characteristics may vary. The rated coil voltage should be applied to

the coil and the set/reset pulse time of latching type relay di󰀨ers for

each relays, please refer to the relay's individual specications.

Coil connection

When connecting coils of polarized relays, please check coil polarity

(+,-) at the internal connection diagram (Schematic). If any wrong

connection is made, it may cause unexpected malfunction, like

abnormal heat, re and so on, and circuit do not work. Avoid

impressing voltages to the set coil and reset coil at the same time.

Maximum allowable voltage and temperature rise

Proper usage requires that the rated coil voltage be impressed on the

coil. Note, however, that if a voltage greater than or equal to the

maximum continuous voltage is impressed on the coil, the coil may

burn or its layers short due to the temperature rise. Furthermore, do

not exceed the usable ambient temperature range listed in the catalog.

Maximum allowable voltage for coil

In addition to being a requirement for relay operation stability, the

maximum continuous impressed coil voltage is an important constraint

for the prevention of such problems as thermal deterioration or

deformity of the insulation material, or the occurrence of re hazards.

Temperature rise due to pulse voltage

When a pulse voltage with ON time of less than 2 minutes is used, the

coil temperature rise bares no relationship to the ON time. This varies

with the ratio of ON time to OFF time, and compared with continuous

current passage, it is rather small. The various relays are essentially

the same in this respect.

Operate voltage change due to coil temperature rise　

　(Hot start)

In DC relays, after continuous passage of current in the coil, if the

current is turned OFF, then immediately turned ON again, due to the

temperature rise in the coil, the pick-up voltage will become somewhat

higher. Also, it will be the same as using it in a higher temperature

atmosphere. The resistance/temperature relationship for copper wire

is about 0.4% for 1°C, and with this ratio the coil resistance increases.

That is, in order to operate of the relay, it is necessary that the voltage

be higher than the pick-up voltage and the pick-up voltage rises in

accordance with the increase in the resistance value. However, for

some polarized relays, this rate of change is considerably smaller.

Current passage time (%)

For continuousu passage Tempereture rise value is

100

ON : OFF =

About

ON : OFF =

About

ON : OFF =

About

ON : OFF = 1 : 1

Voltage

Time

Ambient Environment

Dew condensation

Condensation occurs when the ambient temperature drops suddenly

from a high temperature and humidity, or the relay and microwave

device is suddenly transferred from a low ambient temperature to a

high temperature and humidity. Condensation causes the failures like

insulation deterioration, wire disconnection and rust etc.

Panasonic Corporation does not guarantee the failures caused by

condensation.

The heat conduction by the equipment may accelerate the cooling of

device itself, and the condensation may occur.

Please conduct product evaluations in the worst condition of the actual

usage. (Special attention should be paid when high temperature

heating parts are close to the device. Also please consider the

condensation may occur inside of the device.)

Icing

Condensation or other moisture may freeze on relays when the

temperature become lower than 0°C.This icing causes the sticking of

movable portion, the operation delay and the contact conduction failure

etc. Panasonic Corporation does not guarantee the failures caused by

the icing.

The heat conduction by the equipment may accelerate the cooling of

relay itself and the icing may occur. Please conduct product

evaluations in the worst condition of the actual usage.

Low temperature and low humidity

The plastic becomes brittle if the switch is exposed to a low

temperature, low humidity environment for long periods of time.

High temperature and high humidity

Storage for extended periods of time (including transportation periods)

at high temperature or high humidity levels or in atmospheres with

organic gases or sulde gases may cause a sulde lm or oxide lm to

form on the surfaces of the contacts and/or it may interfere with the

functions. Check out the atmosphere in which the units are to be

stored and transported.

Package

In terms of the packing format used, make every e󰀨ort to keep the

e󰀨ects of moisture, organic gases and sulde gases to the absolute

minimum.

ASCTB403E 201905

Panasonic Corporation Electromechanical Control Business Division

industrial.panasonic.com/ac/e/ Panasonic Corporation 2019

GUIDELINES FOR MICROWAVE DEVICES USAGE

Storage requirements

Since the SMD type is sensitive to humidity it is packaged with tightly

sealed anti-humidity packaging. However, when storing, please be

careful of the following.

1) Please use promptly once the anti-humidity pack is opened.(within

72 hours, Max. 30°C/70% R.H.). If left with the pack open, the relay

will absorb moisture which will cause thermal stress when reow

mounting and thus cause the case to expand. As a result, the seal

may break.

* For RE relays, after this bag is opened, the product must be used

within 24 hours.

2) If relays will not be used within 72 hours, please store relays in a

humidity controlled desiccator or in an anti-humidity bag to which

silica gel has been added.

* If the relay is to be soldered after it has been exposed to excessive

humidity atmosphere, cracks and leaks can occur. Be sure to mount

the relay under the required mounting conditions

* For RE relays, after this bag is opened, the product must be used

within 24 hours.

3) The following cautionary label is a󰀩xed to the anti-humidity pack.

Silicon

When a source of silicone substances (silicone rubber, silicone oil,

silicone coating materials and silicone lling materials etc.) is used

around the relay, the silicone gas (low molecular siloxane etc.) may be

produced.

This silicone gas may penetrate into the inside of the relay. When the

relay is kept and used in this condition, silicone compound may adhere

to the relay contacts which may cause the contact failure. Do not use

any sources of silicone gas around the relay (Including plastic seal

types).

NOx Generation

When relay is used in an atmosphere high in humidity to switch a load

which easily produces an arc, the NOx created by the arc and the

water absorbed from outside the relay combine to produce nitric acid.

This corrodes the internal metal parts and adversely a󰀨ects operation.

Avoid use at an ambient humidity of 85%RH or higher (at 20°C). If use

at high humidity is unavoidable, please contact our sales

representative.

Others

Cleaning

1) Although the environmentally sealed type relay (plastic sealed type,

etc.) can be cleaned, avoid immersing the relay into cold liquid (such

as cleaning solvent) immediately after soldering. Doing so may

deteriorate the sealing performance.

2) Surface mount terminal type relay is sealed type and it can be

cleaned by immersion. Use pure water or alcohol-based cleaning

solvent.

3) Cleaning with the boiling method is recommended (The temperature

of cleaning liquid should be 40°C or lower).

Avoid ultrasonic cleaning on relays. Use of ultrasonic cleaning may

cause breaks in the coil or slight sticking of the contacts due to the

ultrasonic energy.

Other handling precautions

・Expected switching life is dened under the standard test conditions

(temperature 15 to 35°C, humidity: 25 to 75%) specied in JIS C

5442.

Expected switching life is depend on usage conditions; coil driving

circuit, load type, activation frequency, activation phase, ambient

conditions and other factors. Please check relays and microwave

devices on the actual circuit.

Also, pay special attention loads such as those listed below.

・When used for AC load-operating and the operating phase is

synchronous, rocking and fusing can easily occur due to contact

shifting.

・Frequent switching under load condition

When high frequently switched under load condition that can cause

arc at the contacts, nitrogen and oxygen in the air is fused by the

arc energy and HNO3 is formed. This can corrode metal materials.

Countermeasures for these are.

1. Incorporate an arc-extinguishing circuit.

2. Lower the operating frequency

3. Lower the ambient humidity

・When used for ‘‘Dry switching’’ without load current, please contact

our sales representative.

・Please avoid relays to be used outside of the specication ranges

such as the coil rating, contact rating and switching life that may

cause abnormal heating, smoke, and re.

・In case relays and microwave devices are dropped, please do not

use.

Please refer to "the latest product specications"

when designing your product.

•Requests to customers:

https://industrial.panasonic.com/ac/e/salespolicies/

*RE Relays only

ASCTB403E 201905

Please contact ..........

Electromechanical Control Business Division

industral.panasonic.com/ac/e/

Specifications are subject to change without notice.

1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan

ASCTB102E 201907