www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
B-134
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in inches (millimeters) and are subject to change without notice.
AS85049
B
AS85049/126
90° Strain Relief
Self-Locking or Non-Self-Locking
Product Series and
Basic Part Number
M85049/126 S 09 W
S = Detented Self-Locking
N = Non-Detented Self-Locking
Use Dash (–) for Non-Self-Locking
(See Note 5)
Dash No.
Table I
Page 62-34
Finish
Table II
Page 62-34
Knurl Style
Optional
Ø.125 (3.2) Drain Holes
3 Min, Equally Spaced
G
B
.060/.380
(1.52/9.65)
Screw
Extension
H
F
Coupling Nut
A Thread
C
Captive
Self-locking Nut
-typ- Screw
E
.660
(16.8)
Max
D
See Note 4
CONNECTOR DESIGNATOR:
HMIL-DTL-38999 Series III & IV
EN3645
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
B-135
Dimensions in inches (millimeters) and are subject to change without notice.
© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
AS85049
B
Screw
Captive
Self-locking Nut
-typ- C
See Note 4
APPLICATION NOTES
1. Assembly to be identied with manufacturer’s name and part number, space permitting.
2. Glenair Series 600 Backshell Assembly Tools are recommended for assembly and
installation.
3. Metric equivalents in parentheses (mm) are given for general information only and are
based on 1.000 inch = 25.4 mm.
4. Cable entry is measured with saddle bars closed and bottomed on clamp ears.
5. Detented self-locking has a positive audible detented coupling.
6. Material/Finish:
Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II.
Clamp screws and lock nuts - CRES/Passivated, Silver plate optional.
Anti-rotation device - Corrosion resistant material
TABLE I: Dash Number, Shell Size, Thread and Dimensions
Dash
No. Screw
Size Shell Size
Code (Ref) A Thread
ISO Metric B Dia
Max
C Dim
± .031 (0.79)
See Note 4
D
Max E Max
Length F
Max G
Max H
Max
09 4-40 A M12 x 1 - 6H .858 (21.8) .219 (5.6) .86 (21.8) 1.14 (29.0) .81 (20.6) 1.24 (31.5) .88 (22.4)
11 4-40 B M15 x 1 - 6H .984 (25.0) .264 (6.7) .94 (23.9) 1.22 (31.0) .87 (22.1) 1.36 (34.5) .94 (23.9)
13 4-40 C M18 x 1 - 6H 1.157 (29.4) .344 (8.7) 1.14 (29.0) 1.42 (36.1) .93 (23.6) 1.51 (38.4) 1.12 (28.4)
15 4-40 D M22 x 1 - 6H 1.297 (32.5) .460 (11.7) 1.20 (30.5) 1.48 (37.6) .99 (25.1) 1.63 (41.4) 1.19 (30.2)
17 4-40 E M25 x 1 - 6H 1.406 (35.7) .545 (13.8) 1.34 (34.0) 1.62 (41.1) 1.09 (27.7) 1.76 (44.7) 1.44 (36.6)
19 6-32 F M28 x 1 - 6H 1.516 (38.5) .615 (15.6) 1.46 (37.1) 1.74 (44.2) 1.23 (31.2) 1.99 (50.5) 1.56 (39.6)
21 6-32 G M31 x 1 - 6H 1.642 (41.7) .698 (17.7) 1.58 (40.1) 1.86 (47.2) 1.30 (33.0) 2.12 (53.8) 1.69 (42.9)
23 6-32 H M34 x 1 - 6H 1.768 (44.9) .780 (19.8) 1.71 (43.4) 1.99 (50.5) 1.36 (34.5) 2.24 (56.9) 1.75 (44.5)
25 8-32 J M37 x 1 - 6H 1.869 (47.5) .850 (21.6) 1.83 (46.5) 2.11 (53.6) 1.42 (36.1) 2.35 (59.7) 1.88 (47.8)
AS85049/126
90° Strain Relief
Self-Locking or Non-Self-Locking
TABLE II: Material and Finish
Symbol Material Finish
A
Aluminum Alloy
Black Anodize
NElectroless Nickel
WCadmium, Olive Drab
XNickel Fluorocarbon Polymer
YPure Dense Electrodeposited
Aluminum
ZZinc Nickel
S300 Series SST Passivated
