T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: WP130WDT/EGW High Efficiency Red Green Features Description z Pre-trimmed leads for pc board mounting. The High Efficiency Red source color devices are made with z 3 leads with common lead. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Black case enhances contrast ratio. Light Emitting Diode. z Housing UL rating:94V-0. The Green source color devices are made with Gallium z Housing material: type 66 nylon. Phosphide Green Light Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF1530 REV NO: V.5 DATE: MAR/22/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000189 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 12 30 12 30 High Efficiency Red (GaAsP/GaP) WP130WDT/EGW Viewing Angle [1] 21/2 60 White Diffused Green (GaP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Green 2 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating / Storage Temperature V -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF1530 REV NO: V.5 DATE: MAR/22/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000189 WP130WDT/EGW High Efficiency Red SPEC NO: DSAF1530 REV NO: V.5 DATE: MAR/22/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000189 Green SPEC NO: DSAF1530 REV NO: V.5 DATE: MAR/22/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000189 PACKING & LABEL SPECIFICATIONS WP130WDT/EGW SPEC NO: DSAF1530 REV NO: V.5 DATE: MAR/22/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000189 SPEC NO: DSAF1530 REV NO: V.5 DATE: MAR/22/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000189