Crimp-Validation product: DELPHI PN 15414438 material: surface: material thickness: CUNI3SI1MG AU 0,25 mm cross section [mm]: 0,6 | 0,75 | 1,0 strip length: 4,00 mm cable type: insulation o [mm]: IRT2 1,70 - 2,15 seal: conductor dimension cable type cross sect. [mm] struct. nxd [mm] IRT2 IRT2 IRT2 0,6 0,75 1,0 12 x 0,25 24 x 0,19 19 x 0,25 crimp dimension [mm] insul. tear-out core insulation diam. force height width height width height [mm] [N] 0,05 0,10 0,10 0,10 tol. 1,83 1,80 2,07 90 120 160 1,20 1,30 1,40 1,70 1,70 1,70 2,20 2,30 2,40 2,10 2,10 2,15 width tol. core: C-1.60-3.0-10 DPN 10713736 insulation: IS-2.00-3.0-12-A DPN 10882043 anvil: two piece anvil: AC-1.60-3.25 DPN 10764051 AI-2.00-3.2-0.4-A DPN 10882044 Date: Date Rev.: 06.12.2002 23.06.2008 Rev.-No.: 02 Record-No. 11951 page 1 / 2 Approved by: DELPHI WUPPERTAL / PETP / HERMANN Owner: DELPHI GERMANY Crimp-Validation DELPHI PN 15414438 cable: 0,60 mm = 12 x 0,25 mm crimp height: 1,20 mm crimp width: 1,70 mm cable: 0,75 mm = 24 x 0,19 mm crimp height: 1,30 mm crimp width: 1,70 mm cable: 1,00 mm = 19 x 0,25 mm crimp height: 1,40 mm crimp width: 1,70 mm Date: Date Rev.: 06.12.2002 23.06.2008 Rev.-No.: 02 Record-No. 11951 page 2 / 2 Approved by: DELPHI WUPPERTAL / PETP / HERMANN Owner: DELPHI GERMANY