SEALED TOGGLE SWITCHES SEALED
TOGGLES
T7
Specifications Subject To Change Without Notice www.ottoexcellence.com 117
TOGGLE SWITCHES
LOW COST TOGGLE FOR WET & DUSTY ENVIRONMENTS
These toggle switches are rugged, high performance sealed switches
designed for use under severe conditions found in heavy equipment,
industrial control, marine and appliance applications. They are totally
sealed so the switch can withstand direct water spray and submersion,
even during operation. They are designed to meet the international
submersion specification level IP68. OTTO's front panel seal is
accomplished with an O-ring under the bat handle. However, now a
secondary visible bushing seal is offered as an option.
T7 series toggles are offered in single and double pole configurations. A
choice of models are offered to handle power levels to 16 amperes, 1/2HP
and low level electronic switching applications.
These toggles feature positive detent action for safe switching operation.
In conjunction with the unique OTTO snap-action switch mechanism, the
T7 series offers non-teasible contact transfer.
High contact pressure and superior contact wiping action of the OTTO
design makes the T7 series an excellent choice for switching loads from
logic level up to 16 amperes.
Mounting hardware provided includes two hex nuts, one lockwasher and
one keyway washer. An optional panel gasket is also available.
Quality Features:
• Withstands direct water spray
• Submersible. Designed to meet IP68
• Switches up to16 Amps
• Withstands extreme shock & vibration
• Positive detent, non-teasible contact transfer
• 2- & 3-position, momentary and maintained action
• Choice of terminal styles
• UL & CSA recognized
T7 PART NUMBER CODE
T 7 - X X X X X X
T7 Connector part number C801765.
Standard Characteristics/Ratings:
OPERATIONAL:
Mechanical Life: 100,000 cycles, minimum
Seal: Watertight, submersible to IP68
Temperature Range: -30°C to +85°C
Bushing & Toggle Handle: Precision machined or cast
Case: Thermoplastic
Terminals: Copper alloy
Contacts: Fine Silver/Silver cad. oxide
ELECTRICAL: (at 28 VDC or 115 VAC, 60/400 Hz.)
Load Amperes Life (Min.)
Resistive 16A 25,000 cycles
Resistive 10A 50,000 cycles
Inductive 10A 25,000 cycles
Motor 1/2HP 25,000 cycles
Dielectric Withstand: 1050Vrms
Circuitry Terminal Style Contact Rating Circuit Made with Actuator at: Toggle Style Button Color
Keyway
Side
Center Opposite
Keyway
1. 1 Pole 1. 250" Q.C. 1. Standard A. ON None OFF 1. Bat Handle 1. Red
2. 2 Pole 2. Screw 2. Low Level B. ON None ON 2. Lever Lockout
(consult factory)
2. Black
3. Solder C. MOM-ON None OFF 8. Gray
4. PC Pin
(consult factory)
D. MOM-ON None ON 3. Dome Button
E. MOM-ON OFF MOM-ON 4. Rocker Button
F. ON OFF ON 5. Bat Handle With
Bushing Seal
G. MOM-ON OFF ON
H. OFF None ON
J. OFF None MOM-ON
K. ON OFF MOM-ON
