J405.E (12/11)1pulseelectronics.com
PulseJack™
2xN Gigabit
RoHS peak wave solder temperature rating 260°C
Suitable for CAT 3, 5, 6 UTP cable or better
350µH minimum OCL with 8mA bias current
High performance for maximum EMI suppression
Meets or exceeds IEEE 802.3ab standard for 1000Base-T
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
RoHS
Compliant
Part Number
Number
of
Ports
1-125 MHz 1-40 MHz 60 MHz 100 MHz 1-10 MHz 30-60 MHz 60-100 MHz 1-10 MHz 10-150 MHz I MIN
JC0-0131NL 2x4 -0.8 -20 -17 -14 -40 -35 -30 -50 -40 2250
JC0-0132NL 2x6 -0.8 -20 -17 -14 -40 -35 -30 -50 -40 2250
JC0-0133NL 2x8 -0.8 -20 -17 -14 -40 -35 -30 -50 -40 2250
Description:
10/100/1000 Base-T RJ45 2xN Integrated Magnetics Connector without LEDs, designed to
support such applications as: Switches, Routers, Servers and Hub.
Features and Benefits:
Common Mode
Rejection
(dB TYP)
Crosstalk
(dB TYP)
Hipot
(Vdc MIN)
Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C
Return Loss
(dB TYP)
100Ω (± 15 Ω)
Insertion
Loss TX/RX
(dB MIN)
RJ45 Durability Testing Rating
Part Number
Mating Force
(MAX)
Unmating Force
(MAX)
Durability Plug to Jack
Retention (MIN)
JC0 Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 20 Ibs./9.072 kgs.
US Patent #7241181
RJ45 Material Specification
Part
Number
Shield Contact
Material Finish Material Plating Area Solder Area Material Specification MSL
JC0 Series Brass 10-20µ inches thick Nickel over
brass
Phosphor
Bronze
30µ inches gold over
30-80µ inches nickel Tin matte finish Thermoplastic UL 94 V-0 1
Housing
Notes: 1. Connector dimensions comply with FCC dimension requirements 2. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest rating = 1, lowest rating = 5).
2
J405.E (12/11)2pulseelectronics.com
PulseJack™
2xN Gigabit
2X4 Mechanicals (No LEDs)
JC0-0131NL
US Patent #7241181
J405.E (12/11)3pulseelectronics.com
PulseJack™
2xN Gigabit
JC0-0132NL
2X6 Mechanicals (No LEDs)
US Patent #7241181
J405.E (12/11)4pulseelectronics.com
PulseJack™
2xN Gigabit
Mechanicals
JC0-0133NL
US Patent #7241181
J405.E (12/11)5pulseelectronics.com
PulseJack™
2xN Gigabit
Pin-out Assignment
Schematic
JC0-0131NL/32NL/33NL
US Patent #7241181
NOTE: All parts use the same port
indentification system. JC0-0133
(2x8) shown here.
6pulseelectronics.com
PulseJack™
2xN Gigabit
J405.E (12/11)
For More Information
2XN Gigabit Application Note
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA
92128
U.S.A.
Tel: 858 674 8100
Pulse Europe
Einsteinstrasse 1
D-71083 Herren-
berg
Germany
Tel: 49 7032 7806
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technol-
ogy Bldg.
10th Kejinan Road
High-Tech Zone
Nanshan District
Shenzen, PR China
518057
Pulse North China
Room 2704/2705
Super Ocean Finance
Ctr.
2067 Yan An Road
West
Shanghai 200336
China
Pulse South Asia
135 Joo Seng Road
#03-02
PM Industrial Bldg.
Singapore 368363
Tel: 65 6287 8998
Fax: 65 6287 8998
Pulse North Asia
3F, No. 198
Zhongyuan Road
Zhongli City
Taoyuan County 320
Taiwan R. O. C.
Tel: 886 3 4356768
Fax: 886 3 4356823
(Pulse)
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2011. Pulse Electronics, Inc. All rights reserved.
US Patent #7241181
These Integrated Connector Modules are specifically
designed for the implementation of a 10Base-T, 100Base-
TX and 1000Base-TX transmission over data-grade
unshielded twisted pair cable (UTP-3, 5-5e and 6).
The connectors category provide excellent EMI filtering
and are suitable for Embedded Systems and Multiport
Applications. Pulse has worked closely with the leading IC
manufacturers in providing these 10/100/1000 solutions,
thereby assuring comptability with each transceiver.
JC0 series meet the stringent open circuit inductance
requirements imposed by IEEE. When an 8mA DC
current is applied across the transformer windings, the
transformer will provide at least 350 µH of open circuit
inductance. The transformers used in each module also
provide 2250Vdc minimum isolation, wide band width
with minimal attenuation and fast rise times to minimize
system level jitter.
Notes:
1. For maximum EMI suppression (electromagnetic interference) place the 3. Connections between 10/100/1000 IC and the connector should be direct
decoupling capacitors adjacent to Vcc and 50 Ω connections. (ideally no change in direction) and of minimum length.
2. Connections to ground should be as short as possible.
