50 Schoolhouse Lane
Portsmouth, RI 02871
Tel (401) 683-9700
Fax (401) 683-5571
e-mail: ims@ims-resistors.com
http://www.ims-resistors.com
Miniature Single-Sided Thick
Film Chip Resistors
Features
Thick film technology
Single-Sided Terminations
for Wirebonding, Soldering,
and Epoxy Attachment
Gold, Platinum Silver, and
Platinum Silver with Solder
Coating Terminations
Resistance values from
0.1ΩΩ
ΩΩ
Ω to 1000 GΩΩ
ΩΩ
Ω
Tolerances to ± 1 %
Low TCRs
The
ims
IMS series of miniature single-sided thick film chip resistors is
ideally suited for hybrid and printed circuit applications. Many combinations
of termination materials are available to meet the requirements of all
common attachment methods. Sizes from .025” X .030” to 0.150” X 0.050”
are offered. A wide range of values and tolerances is available.
Terminations Single side termination
-1 Au
-3 PtAg
-C PtAg with 62/36/2 solder
coating
Resistance Ranges
The table below illustrates the resistance values and the tolerances available
for all of IMS’ single side devices. Resistance values can be as low as
0.1ΩΩ
ΩΩ
Ω and as high as 1000 GΩΩ
ΩΩ
Ω (device dependent). For resistances higher
than 1000 GΩ, consult the factory.
Note: Not all termination materials available in all styles.
Jumpers are available in all sizes.
1 Larger bond pads available for auto wirebonding.
0.1 - 0.99 5%
10%
20%
1.0 - 9.9 2%
5%
10%
20%
10 - 25M 1%
2%
5%
10%
20%
26M - 1G 5%
10%
20%
30%
40%
50%
1.1G - 9.9G 20%
30%
40%
50%
10G - 99G 30%
40%
50%
100G - 1T 40%
50%
0001
001
002
003
004
005
008
009
H09
010
014
017
50 Schoolhouse Lane
Portsmouth, RI 02871
Tel (401) 683-9700
Fax (401) 683-5571
e-mail: ims@ims-resistors.com
http://www.ims-resistors.com
Bulk packaging is standard. Tape and reel and waf fle packs are av ailable
for some sizes. Please consult the factory.
Samples
Available
From Stock
Part Number Length Width Height
IMS000 0.045 ± .005 0.030 ± .005 0.016 max.
IMS001 0.050 ± .005 0.050 ± .005 0.016 max.
IMS002 0.075 ± .005 0.050 ± .005 0.016 max.
IMS003 0.100 ± .005 0.050 ± .005 0.016 max.
IMS004 0.150 ± .005 0.050 ± .005 0.016 max.
IMS005 0.100 ± .005 0.100 ± .005 0.016 max.
IMS008 0.100 ± .005 0.025 ± .005 0.016 max.
IMS009 0.080 ± .005 0.050 ± .005 0.016 max.
IMSH09 0.080 ± .005 0.050 ± .005 0.016 max.
IMS010 0.125 ± .005 0.050 ± .005 0.016 max.
IMS014 0.035 ± .005 0.035 ± .005 0.016 max.
IMS017 0.025 ± .005 0.030 ± .005 0.016 max.
L
W
H
T
Specifications
Dimensions
Example: 0.045” X 0.030,” gold terminations, 100ΩΩ
ΩΩ
Ω, 5% tolerance
Ordering Information
0001001 002
003 004 005
008 H09 009
010 01420172
1 Available in -0, -1, -2 only
2 Available in -1 only
Termination
-0 Pd/Ag (IMS000 only)
-2 Pd/Ag w/ 62/36/2 solder (IMS000 only)
-1 Au
-3 Pt/Ag
-C Pt/Ag w/ 62/36/2 solder
Resistance value
The first three digits are significant
values. The fourth is the number of
zeroes following. The R indicates a
decimal point when resistance v alue is
less than 100Ω.
IMS000 - 1 - 1000 JTolerance
F - 1% G - 2% J - 5%
K - 10% L - 15% M - 20%
N - 30%
IMS ver.6 03/04 Specifications subject to change without notice.
Add “B” after the dash number to indicated a
backplane of the same Metalization (-1,-3 only).
* Incr eased power handling can be achieved by using proper circuit design
and power management techniques .
HL
W
Part number Rated power (70oC)* WVDC Tolerances (%)
IMS000 125 mW 60 1, 2, 5, 10
IMS001 125 mW 60 1, 2, 5, 10
IMS002 175 mW 100 1, 2, 5, 10
IMS003 250 mW 160 1, 2, 5, 10
IMS004 350 mW 350 1, 2, 5, 10
IMS005 500 mW 160 1, 2, 5, 10
IMS008 100 mW 175 1, 2, 5, 10
IMS009 175 mW 150 1, 2, 5, 10
IMSH09 175 mW 150 10, 20, 30
IMS010 250 mW 230 1, 2, 5, 10
IMS014 125 mW 50 1, 2, 5, 10
IMS017 30 mW 40 1, 2, 5, 10
