LITE-ON SEMICONDUCTOR STPR1610CT thru 1660CT REVERSE VOLTAGE - 100 to 600 Volts FORWARD CURRENT - 16 Amperes SUPER FAST GLASS PASSIVATED RECTIFIERS TO-220AB FEATURES Glass passivated chip Superfast switching time for high efficiency Low forward voltage drop and high current capability Low reverse leakage current High surge capacity Plastic package has UL flammability classification 94V-0 B L M C D A K E PIN 1 2 3 F I Case : TO-220AB molded plastic Polarity : As marked on the body Weight : 0.08 ounces, 2.24 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) B TO-220AB MIN. MAX. 14.22 15.88 9.65 10.67 C 2.54 3.43 D 5.84 E 8.26 - 6.86 9.28 F G MECHANICAL DATA DIM. A J N H H PIN 1 PIN 2 CASE PIN 3 6.35 14.73 G H 12.70 2.29 2.79 I J K L M 0.51 0.30 3.53 3.56 1.14 0.64 4.09 4.83 1.14 1.40 N 2.92 2.03 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Non Repetitive Peak Forward Surge Current Per Diode Sinusoidal @TC=120 TP=8.3ms VRRM VRMS VDC STPR 1610CT 100 70 100 STPR 1620CT 200 140 200 I(AV) STPR 1630CT 300 210 300 STPR 1640CT 400 280 400 STPR 1650CT 500 350 500 STPR 1660CT 600 420 600 UNIT V V V A 16 A IFSM 90 1.1 1.0 1.25 1.20 1.3 1.2 1.5 1.4 Maximum forward Voltage IF=8A @TJ =25 IF=8A @TJ =125 Pulse Width =300us IF=16A @TJ =25 Duty cycle IF=16A @TJ =125 VF Maximum DC Reverse Current at Rated DC Blocking Voltage IR 10 500 uA CJ 80 pF @TJ =25 @TJ =100 Typical Junction Capacitance per element (Note 1) Maximum Reverse Recovery Time (Note 2) Typical Thermal Resistance Operating and Storage Temperature Range TRR 30 35 1.5 1.4 1.7 1.6 50 V ns R JC 3.0 /W TJ,TSTG -55 to +150 NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Reverse Recovery Test Conditions:IF=0.5A,IR=1.0A,IRR =0.25A. REV. 2, Sep-2010, KTGC12 RATING AND CHARACTERISTIC CURVES STPR1610CT thru STPR1660CT FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 16 12 8 4 RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 125 150 120 100 80 TP=8.3ms 60 TP=10ms 40 20 Single Half-Sine-Wave 0 1 175 2 CASE TEMPERATURE , C 20 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100.0 200 PERCENT OF FORWARD CURRENT ,(%) (%) 10.0 PERCENT OF FORWARD CURRENT 180 TJ = 100 C TJ = 75 C 1.0 TJ = 25 C 0.1 0.01 .001 0 20 60 160 VB@ 300~400V VB@ 500~600V 140 120 100 80 60 40 20 0 140 100 VB@ 100~200V 0 0.2 0.4 0.6 0.8 1 1.2 1.4 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(uA) 5 100 TJ = 25 C, f= 1MHz 10 0.1 1 4 10 REVERSE VOLTAGE , VOLTS 100 1.6 1.8 Legal Disclaimer Notice STPR1610CT thru STPR1660CT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.