GI2401 thru GI2404 Vishay General Semiconductor Dual Common-Cathode Ultrafast Plastic Rectifier FEATURES * Glass passivated chip junction TO-220AB * Ultrafast recovery time * Low switching losses, high efficiency * High forward surge capability * Solder dip 260 C, 40 s 3 * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 2 1 PIN 1 PIN 2 PIN 3 CASE TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, dc-to-dc converters, and other power switching application. PRIMARY CHARACTERISTICS MECHANICAL DATA IF(AV) 16 A VRRM 50 V to 200 V IFSM 125 A Epoxy meets UL 94V-0 flammability rating trr 35 ns VF 0.895 V TJ max. 150 C Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Case: TO-220AB Polarity: As marked MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL GI2401 GI2402 GI2403 GI2404 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V Maximum RMS voltage VRMS 35 70 105 140 V Maximum DC blocking voltage VDC 50 100 150 200 V Maximum average forward rectified current at TC = 100 C IF(AV) 16 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 125 A TJ, TSTG - 65 to + 150 C Operating junction and storage temperature range Document Number: 88624 Revision: 30-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 GI2401 thru GI2404 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage per diode IF = 4 A IF = 8 A IF = 4 A IF = 8 A Maximum DC reverse current at rated DC blocking voltage per diode SYMBOL TJ = 25 C TJ = 25 C TJ = 100 C TJ = 100 C VF TC = 25 C TC = 100 C IR GI2401 GI2402 GI2403 GI2404 UNIT 0.900 0.975 0.800 0.895 V 50 150 5.0 500 A Maximum reverse recovery time per diode IF = 0 .5 A, IR = 1.0 A, Irr = 0.25A trr 35 ns Typical junction capacitance per diode 4.0 V, 1 MHz CJ 85 pF THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL GI2401 GI2402 RJA RJC Typical thermal resistance per diode (1) GI2403 GI2404 UNIT 16 2.2 C/W Note: (1) Thermal resistance from junction to ambient and from junction to case per leg mounted on heatsink ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N TO-220AB UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.85 45 50/tube Tube 1.85 45 50/tube Tube GI2401-E3/45 TO-220AB GI2401HE3/45 (1) Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 150 Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Rectified Current (A) 20 16 Infinite Heatsink, TC 12 8 Ambient Air Rating, TA 4 TC = 125 C 8.3 ms Single Half Sine-Wave 125 100 75 50 25 0 0 0 25 50 75 100 125 150 1 10 100 Case Temperature (C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88624 Revision: 30-Aug-07 GI2401 thru GI2404 Vishay General Semiconductor 1000 TJ = 125 C TJ = 25 C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 Pulse Width = 300 s 1 % Duty Cycle 1 0.1 0.01 0.2 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 100 10 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode Instantaneous Reverse Leakage Current (A) 100 TJ = 125 C 10 TJ = 100 C 1 0.1 TJ = 25 C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.104 (2.65) 0.096 (2.45) Document Number: 88624 Revision: 30-Aug-07 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.603 (15.32) 0.573 (14.55) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000