Ulverston - LA12 7NQ
Cumbria UK
Tel +44 (0) 1229 580000
www.forge-europa.co.uk
www.forgeasia.com
www.whiteleds.co.uk
Forge Europa Limited
The Old Railway
Princes Street
©E-Mail sales@forge-europa.co.uk
sales@forgeasia.com
Fax +44 (0) 1229 586890
FEL- F115XV12Data Sheet
Issue 02 30-11-04 Sheet 1 of 3
LED Lamp Fascia Illuminator
• Designed to push fit into a round hole in a Vac Form cavity or fascia plate
• Fitted with an Insulation Displacement Connector for ease of wiring
• High intensity White illuminator for incandescent bulb replacement
• Range of decorative colours for special effects without filters
• Low power consumption
• Fitted with reverse voltage protection diode
• Water clear epoxy
• Class II ESD Rating
Electro / Optical Characteristics White Illuminator Ta = 25°
°°
° C
Electro / Optical Characteristics Coloured Illuminator Ta = 25°
°°
° C
Temperature Characteristics for all Illuminators
Part Number Emitting
Colour
Die
Material
Chromaticity Coordinates Supply
Voltage
Current
Consumption
Luminous
Flux
xy
FEL-F115W15V12 White InGaN/SiC 0.31 0.32 12 30 2.82
Units typical VDC mA typical lm typical
Part Number Emitting
Colour
Die
Material
Wavelength Supply
Voltage
Current
Consumption
Luminous
Flux
Peak λPDominant λd
FEL-F115R2112V12 Red AlGaInP 650 635 12 35 3.30
FEL-F115Y1512V12 Yellow AlGaInP 591 589 12 35 3.20
FEL-F115G16V12 Green InGaN/SiC 518 527 12 35 2.97
FEL-F115G11V12 Green InGaN/SiC 502 505 12 35 1.69
FEL-F115B15V12 Blue InGaN/SiC N/A 460 ±5 12 35 0.85
Units nm VDC mA typical lm typical
Characteristic Symbol Rating Units
Operating Temperature Topr - 25 to + 80 ° C
Storage Temperature Tstg - 30 to + 85 ° C
FEL- F115XV12
Features
It is the responsibility of the customer to verify
the suitability of the product for the application.
Patent pending
Ulverston - LA12 7NQ
Cumbria UK
Tel +44 (0) 1229 580000
www.forge-europa.co.uk
www.forgeasia.com
www.whiteleds.co.uk
Forge Europa Limited
The Old Railway
Princes Street
©E-Mail sales@forge-europa.co.uk
sales@forgeasia.com
Fax +44 (0) 1229 586890
LED Lamp Fascia Illuminator
FEL- F115XV12
FEL- F115XV12Data Sheet
Issue 02 30-11-04 Sheet 2 of 3
Package Outline Connection Diagram
Tol ± 0.25 mm unless stated,
Dimensions in mm
FORGE
EUROPA
I
R2112
V12
Ulverston - LA12 7NQ
Cumbria UK
Tel +44 (0) 1229 580000
www.forge-europa.co.uk
www.forgeasia.com
www.whiteleds.co.uk
Forge Europa Limited
The Old Railway
Princes Street
©E-Mail sales@forge-europa.co.uk
sales@forgeasia.com
Fax +44 (0) 1229 586890
Data Sheet
Issue 02 30-11-04 Sheet 3 of 3
FEL- F115XV12
LED Lamp Fascia Illuminator
FEL- F115XV12
Mounting Detail
Assembly Method
The design diameter for the mounting hole is 8.0 mm.
The matrix material must be of a consistency suitable to allow the splines of the
product to produce an interference fit in the mounting hole when the product is
assembled.
Depending upon the material type and thickness of the mounting matrix the hole
size should be adjusted by the user to obtain the required level of push fit force /
component retention.
.
Place the nose of the LED
into the mounting hole.
Rotate the product to achieve
the required orientation
of the connector.
Press the assembly into the mounting
hole until the shoulder of the LED is in
full contact with the rear of the
mounting matrix.
R2112
V12