SK12 - SK16 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features * * * For Surface Mounted Applications * * High Reliability * NOT RECOMMENDED FOR NEW DESIGNS Use B1x0B Series High Temperature Metallurgically Bonded Contacts Capable of Meeting Environmental Standards of MIL-STD-19500 B SMB Submersible Temperature of 265C for 10 Seconds in Solder Bath Available in Lead Free Finish/RoHS Compliant Version (Note 3) A C Mechanical Data * * D Case: SMB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 * * Moisture Sensitivity: Level 1 per J-STD-020C * Terminals: Solderable per MIL-STD-202, Method 208 * * Polarity: Cathode Band or Notch J H Also Available in Lead Free Plating (Matte Tin Finish). Please see Ordering Information, Note 5, on Page 3 G E Dim Min Max A 3.30 3.94 B 4.00 4.65 C 1.95 2.21 D 0.15 0.40 E 5.00 6.00 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm Approx. Weight: 0.093 grams Maximum Ratings and Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. Single phase, halfwave, 60Hz resistive or inductive load. Symbol SK12 SK13 SK14 SK15 SK16 Units Maximum Recurrent Peak Reverse Voltage Characteristic VRRM 20 30 40 50 60 V Maximum RMS Voltage VRMS 14 21 28 35 42 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 V Maximum Average Forward Rectified Current @ TA = 75C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at Rated @ TA = 25C DC Blocking Voltage @ TA = 100C Maximum Full Load Reverse Current Full Cycle Average @ TA = 75C I(AV) 1.0 A IFSM 25 A VF 0.55 0.70 V IR 0.5 10 mA IR 5 mA RqJL 25 C/W Typical Total Capacitance (See Note 2) CT 110 pF Operating Temperature Range TJ -65 to +125 C TSTG -65 to +150 C MaximumThermal Resistance (See Note 1) Storage Temperature Range Notes: 1. Thermal resistance from junction to lead. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS13003 Rev. 8 - 3 1 of 3 www.diodes.com SK12-SK16 a Diodes Incorporated SINGLE PHASE HALF-WAVE 60 Hz RESISTIVE OR INDUCTIVE LOAD 2 6.0mm COPPER PADS 0.8 0.6 0.4 0.2 0 40 60 80 100 120 140 160 IF, INSTANTANEOUS FORWARD CURRENT (A) IAV, AVERAGE OUTPUT CURRENT (A) 1.0 4.0 SK12-14 SK15-16 1.0 0.1 TJ = 25C PULSE WIDTH = 300 mS 2% DUTY CYCLE 0.01 0.1 180 TA, AMBIENT TEMPERATURE (C) Fig. 1, Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) CT, TOTAL CAPACITANCE (pF) TJ = 25C f = 1.0MHz 100 1.0 10 VR, REVERSE VOLTAGE (VOLTS) Fig. 3, Typical Total Capacitance 0.9 1.3 1.7 2.1 VF INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2, Typical Forward Characteristics 400 10 0.1 0.5 100 25 20 15 10 5 8.3ms SINGLE HALF SINE-WAVE JEDEC METHOD 0 1 10 100 NUMBER OF CYCLES @ 60 Hz Fig. 4, Max Non-Repetitive Peak Forward Surge Current NOT RECOMMENDED FOR NEW DESIGNS Use B1x0B Series DS13003 Rev. 8 - 3 2 of 3 www.diodes.com SK12-SK16 Ordering Information Notes: (Note 4) Device Packaging Shipping SK12-13 SMB 3000/Tape & Reel SK13-13 SMB 3000/Tape & Reel SK14-13 SMB 3000/Tape & Reel SK15-13 SMB 3000/Tape & Reel SK16-13 SMB 3000/Tape & Reel 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 5. For Lead Free Finish; RoHS Compliant version part numbers, please add "-F" suffix to the part numbers above. Example: SK14-13-F. NOT RECOMMENDED FOR NEW DESIGNS Use B1x0B Series DS13003 Rev. 8 - 3 3 of 3 www.diodes.com SK12-SK16