DS13003 Rev. 8 - 3 1 of 3 SK12-SK16
www.diodes.com ãDiodes Incorporated
SK12 - SK16
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Features
Maximum Ratings and Electrical Characteristics
Characteristic Symbol SK12 SK13 SK14 SK15 SK16 Units
Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 V
Maximum RMS Voltage VRMS 14 21 28 35 42 V
Maximum DC Blocking Voltage VDC 20 30 40 50 60 V
Maximum Average Forward Rectified Current
@ TA= 75°CI(AV) 1.0 A
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method) IFSM 25 A
Maximum Instantaneous Forward Voltage at 1.0A VF0.55 0.70 V
Maximum DC Reverse Current at Rated @ TA= 25°C
DC Blocking Voltage @ TA= 100°CIR0.5
10 mA
Maximum Full Load Reverse Current Full Cycle
Average @ TA= 75°CIR5mA
MaximumThermal Resistance (See Note 1) RqJL 25 °C/W
Typical Total Capacitance (See Note 2) CT110 pF
Operating Temperature Range TJ-65 to +125 °C
Storage Temperature Range TSTG -65 to +150 °C
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, halfwave, 60Hz resistive or inductive load.
A
B
C
D
G
H
E
J
Notes: 1. Thermal resistance from junction to lead.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V.
3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see
EU Directive Annex Notes 5 and 7
.
SMB
Dim Min Max
A3.30 3.94
B4.00 4.65
C1.95 2.21
D0.15 0.40
E5.00 6.00
G0.10 0.20
H0.76 1.52
J2.00 2.62
All Dimensions in mm
·Case: SMB
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Also Available in Lead Free Plating (Matte Tin Finish).
Please see Ordering Information, Note 5, on Page 3
·Terminals: Solderable per MIL-STD-202,
Method 208
·Polarity: Cathode Band or Notch
·Approx. Weight: 0.093 grams
Mechanical Data
·For Surface Mounted Applications
·High Temperature Metallurgically Bonded Contacts
·Capable of Meeting Environmental Standards of
MIL-STD-19500
·High Reliability
·Submersible Temperature of 265°C for
10 Seconds in Solder Bath
·Available in Lead Free Finish/RoHS Compliant Version
(Note 3)
NOT RECOMMENDED FOR NEW DESIGNS -
Use B1x0B Series