ATC RF/Microwave Capacitors for Military and Aerospace Applications ATC RF/Microwave Capacitors QPL Approved to MIL-PRF-55681 / 4 and 5 ATC PART NUMBER CODE: CDR 12 B G 101 A F W S DESIGNATION: Identifies established reliability, ceramic dielectric, fixed, chip capacitors. FAILURE RATE LEVEL (Established at 90% confidence): M - - 1% per 1000 hours P - - 0.1% per 1000 hours R - - 0.01% per 1000 hours S - - 0.001% per 1000 hours STYLE: Identifies dimensions of the capacitor and lead type, where applicable. TERMINATION FINISH: N - Gold over Nickel over Silver (CDR11, CDR13) S - Solder Coated, Final (CDR12, CDR14, CDR23, CDR25) T - Silver (CDR21, CDR22, CDR24) U - Solder Coated, Nickel Barrier (CDR12, CDR14) N and U - Terminations preferred for best solderability, thermocompression bonding, leach and migration resistance, and shelf life for chips and pellets. W - Solder plated, nickel barrier (CDR12, CDR14) RATED TEMP: -55C to +125C VOLTAGE TEMP. (TCC) LIMITS: G = +90 20 PPM/C; P = 0 30 PPM/C CAPACITANCE CODE: The first two digits represent significant figures and the last digit specifies the number of zeros to follow. When fractional values of pF are required, the letter R shall be used to indicate the decimal point. RATED DC VOLTAGE @ 125C: A - - 50 VDC, B - - 100 VDC, C - - 200 VDC, D - - 300 VDC, E - - 500 VDC, K - - 150 VDC CAPACITANCE TOLERANCE: B (0.1 pF), C (0.25 pF), D (0.5 pF), F (1%), G (2%), J (+5%), K (10%), M (20%) TABLE I - STYLES CDR11 AND CDR12 CAPACITOR CHARACTERISTICS TYPE DESIGNATION* CAPACITANCE RANGE (pF) CDR1-B-0R1AB-- to CDR1-B-0R2AB-CDR1-B-0R3A--- to CDR1-B-0R4A--CDR1-B-0R5A--- to CDR1-B-2R2A---** CDR1-B-2R4A--- to CDR1-B-6R2A---*** CDR1-B-6R8A--- to CDR1-B-9R1A---*** CDR1-B-100A--- to CDR1-B-101A---*** CDR1-BP111A--- to CDR1-BP102A---*** CAPACITANCE TOLERANCE AVAILABLE B B, C B, C, D B, C, D B, C, J, K, M F, G, J, K, M F, G, J, K, M 0.1 pF to 0.2 pF 0.3 pF to 0.4 pF 0.5 pF to 2.2 pF 2.4 pF to 6.2 pF 6.8 pF to 9.1 pF 10 pF to 100 pF 110 pF to 1000 pF RATED TEMP. AND VOLTAGE-TEMP. LIMITS Characteristic BG (+90 20 PPM/C) and Characteristic BP (0 30 PPM/C) BP RATED DC VOLTAGE 150 = K 50 = A TABLE II - STYLES CDR13 AND CDR14 CAPACITOR CHARACTERISTICS TYPE DESIGNATION* CAPACITANCE RANGE (pF) CDR1-B-0R1EB-- to CDR1-B-0R2EB-CDR1-B-0R3E--- to CDR1-B-0R4E--CDR1-B--0R5E--- to CDR1-B-2R2E---** CDR1-B-2R4E--- to CDR1-B-6R2E---*** CDR1-B-6R8E--- to CDR1-B-9R1E---*** CDR1-B-100E--- to CDR1-B-101E---*** CDR1-B-111D--- to CDR1-B-201D---*** CDR1-B-221C--- to CDR1-B-471C---*** CDR1-B-511B--- to CDR1-B-621B---*** CDR1-B-681A--- to CDR1-B-102A---*** CDR1-BP112A--- to CDR1-BP512A---*** CAPACITANCE TOLERANCE AVAILABLE B B, C B, C, D B, C, D B, C, J, K, M 0.1 pF to 0.2 pF 0.3 pF to 0.4 pF 0.5 pF to 2.2 pF 2.4 pF to 6.2 pF 6.8 pF to 9.1 pF 10 pF to 100 pF 110 pF to 200 pF 220 pF to 470 pF 510 pF to 620 pF 680 pF to 1000 pF 1100 pF to 5100 pF RATED TEMP. AND VOLTAGE-TEMP. LIMITS Characteristic BG (+90 20 PPM/C) and Characteristic BP (0 30 PPM/C) F, G, J, K, M BP RATED DC VOLTAGE 500 = E 300 = D 200 = C 100 = B 50 = A * Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance (where applicable), termination finish, and failure rate level. ** Intermediate values in this category are in 0.1 pF steps. *** Intermediate values in each category are given by the RETMA 5% Table as follows: 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91. A M E R I C A N 2 ATC North America +1-631-622-4700sales@atceramics.com w T E C H N I C A L C E R A M I C S ATC Europe +46 8 6800410 sales@atceramics-europe.com w w . a t c e r a m i c ATC Asia +86-755-2396-8759 sales@atceramics-asia.com s . c o m ATC RF/Microwave Capacitors QPL Approved to MIL-PRF-55681 / 4 and 5 TABLE III - STYLES CDR21 TO CDR25 CAPACITOR CHARACTERISTICS TYPE DESIGNATION* CAPACITANCE RANGE (pF) CDR2-B-0R1EB-- to CDR2-B-0R2EB-CDR2-B-0R3E--- to CDR2-B-0R4E--CDR2-B--0R5E--- to CDR2-B-2R2E---** CDR2-B-2R4E--- to CDR2-B-6R2E---*** CDR2-B-6R8E--- to CDR2-B-9R1E---*** CDR21-B-100E--- to CDR2-B-101E---*** CDR2-B-111D--- to CDR2-B-201D---*** CDR2-B-221C--- to CDR2-B-471C---*** CDR2-B-511B--- to CDR2-B-621B---*** CDR2-B-681A--- to CDR2-B-102A---*** CDR2-BP112A--- to CDR2-BP512A---*** CAPACITANCE TOLERANCE AVAILABLE B B, C B, C, D B, C, D B, C, J, K, M 0.1 pF to 0.2 pF 0.3 pF to 0.4 pF 0.5 pF to 2.2 pF 2.4 pF to 6.2 pF 6.8 pF to 9.1 pF 10 pF to 100 pF 110 pF to 200 pF 220 pF to 470 pF 510 pF to 620 pF 680 pF to 1000 pF 1100 pF to 5100 pF RATED TEMP. AND VOLTAGE-TEMP. LIMITS RATED DC VOLTAGE Characteristic BG (+90 20 PPM/C) and Characteristic BP (0 30 PPM/C) 500 = E 300 = D 200 = C 100 = B F, G, J, K, M 50 = A BP * Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance (where applicable), termination finish (T for styles CDR21, CDR22 and CDR24, and S for styles CDR23 and CDR25), and failure rate level. Please note: Leaded devices CDR 21 through CDR 25 are available to the R Failure Rate Level only. ** Intermediate values in this category are in 0.1 pF steps. *** Intermediate values in each category are given by the RETMA 5% Table as follows: 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91. MECHANICAL CONFIGURATIONS MIL-PRF55681 STYLES CDR 11 BODY DIMENSIONS CASE SIZE OUTLINES TYPE A LENGTH Chip W CA T L CDR 13 B Chip W/T IS A TERMINATION SURFACE CA CDR 12 A CDR 14 B Pellet P T L W/T IS A TERMINATION SURFACE P CDR 12 A Solder Plate CDR 14 B Solder Plate CDR 21 B .110 .020 (2.79 0.51) .030/.102 (0.76/2.59) N is ATC's UNI-TERM(R) S - Solder Coated, Final U - Solder Coated, Nickel Barrier .110 +.035 -.020 (2.79 +0.89 -0.51) .110 .020 (2.79 0.51) .030/.102 (0.76/2.59) W/T IS A TERMINATION SURFACE W .020/.057 (0.51/1.45) .020/.057 (0.51/1.45) T L .055 .015 (1.4 0.38) .055 .015 (1.4 0.38) W W THICKNESS .055 .025 (1.4 0.63) W Pellet WIDTH LEAD AND TERMINATION DIMENSIONS AND MATERIALS .055 .015 (1.4 0.38) .020/.057 (0.51/1.45) .110 .020 (2.79 0.51) .030/.102 (0.76/2.59) N - Gold Over Nickel Over Silver U is ATC's BARRIER/CAP(R) W - Nickel Barrier, Solder Plate. TL Microstrip LL WL MS LENGTH WIDTH THICKNESS .250 (6.35) min. .093 .005 (2.36 0.13) .004 .001 (0.10 0.03) W L T TL CDR 22 B Axial Ribbon AR CDR 24 CDR 23 CDR 25 B RR B LL WL W LL Radial Ribbon T Axial Wire ** .060/.100 (1.52/2.54) (Termination T - Silver) T L .50 (12.7) min. W LL W L * STYLE 100A 100A 100B 100B A M E R I C A N ATC North America +1-631-622-4700sales@atceramics.com All leads and ribbon are silver and are attached with high temperature solder. EQUIV. ATC PART NO. CHARACTERISTICS BG BP CDR11 CDR12 CDR13 CDR14 700A 700A 700B 700B STYLE EQUIV. ATC PART NO. CHARACTERISTICS BG BP CDR21 CDR22 CDR23 CDR24 CDR25 100B ------ MS 100B ------ AR 100B ------ RW 100B ------ RR 100B ------ AW T E C H N I C A L w . a t c e r a m i c 700B ------ MS 700B ------ AR 700B ------ RW 700B ------ RR 700B ------ AW C E R A M I C S ATC Europe +46 8 6800410 sales@atceramics-europe.com w #26 AWG .016 (.375) dia. nom. (Termination S - Solder Coated) T All dimensions are in inches, except those in parentheses which are in millimeters. w .110 .015 (2.79 0.38) LL * * AW .135 .015 (3.43 0.38) WL W L Radial Wire RW B T L ATC Asia +86-755-2396-8759 sales@atceramics-asia.com s . c o m 3 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 1996, American Technical Ceramics Corp. All Rights Reserved. ATC 001-818 Rev. G; 3/07