M54522FP 8-UNIT 400mA DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE SINK TYPE DESCRIPTION PIN CONFIGURATION M54522FP is an eight-circuit Darlington transistor arrays with clamping diodes. The circuits are made of NPN transistors. NC Both the semiconductor integrated circuits perform high-current 1 20 NC IN1 2 19 O1 IN2 3 18 O2 IN3 4 17 O3 IN4 5 16 O4 IN5 6 15 O5 High-current driving (Ic(max) = 400mA) IN6 7 14 O6 With clamping diodes IN7 8 13 O7 IN8 9 12 O8 driving with extremely low input-current supply. INPUT FEATURES High breakdown voltage (BVCEO > 40V) Driving available with PMOS IC output GND 11 10 Package type OUTPUT COM COMMON 20P2N-A NC : No connection APPLICATIONS Drives of relays and printers, digit drives of indication elements (LEDs and lamps), and interfaces between microcomputer output and high-current or high-voltage systems CIRCUIT DIAGRAM COM FUNCTION OUTPUT The M54522FP each have eight circuits consisting of NPN 20K Darlington transistors. This ICs have resistance of 20k INPUT between input transistor bases and input pins. A spike-killer clamping diode is provided between each output 20K pin (collector) and COM pin. The output transistor emitters are all connected to the GND pin (pin 10). 2K The collector current is 400mA maximum. Collector-emitter GND supply voltage is 40V maximum. The eight circuits share the COM and GND. The diode, indicated with the dotted line, is parasitic, and cannot be used. Unit : ABSOLUTE MAXIMUM RATINGS (Unless otherwise noted, Ta = -20 ~ +75) Symbol VCEO IC VI IF VR Pd Topr Tstg 2012.May Parameter Collector-emitter voltage Output current Input voltage Clamping diode forward current Clamping diode reverse voltage Power dissipation Operating temperature Storage temperature Conditions Output , H Current per circuit output, L Ta = 25, when mounted on board 1 Ratings -0.5 +40 400 -0.5 +40 400 40 1.10 -20 +75 -55 +125 Unit V mA V mA V W M54522FP 8-UNIT 400mA DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE SINK TYPE RECOMMENDED OPERATING (Unless otherwise noted, Ta = -20 ~ +75) Symbol VO Parameter Output voltage Collector current (Current per 1 circuit when 8 circuits are coming on simultaneously) IC VIH "H" input voltage VIL "L" input voltage min 0 Limits typ max 40 0 400 0 200 8 4 0 Duty Cycle no more than 5% Duty Cycle no more than 20% IC < 400mA IC < 200mA Unit V mA 30 V 0.5 V ELECTRICAL CHARACTERISTICS (Unless otherwise noted, Ta = 2075 Symbol Parameter V (BR)CEO VCE(sat) Collector-emitter breakdown voltage Collector-emitter saturation voltage Input current Clamping diode forward voltage Clamping diode reverse current DC amplification factor II VF IR hFE Test conditions min Limits typ Unit max V ICEO = 100A 40 -- -- VI = 8V, IC = 400mA VI = 4V, IC = 200mA VI = 17V -- -- 0.3 1.15 0.95 0.85 2.4 1.6 1.8 mA IF = 400mA -- 1.5 2.4 V VR = 40V -- -- 100 A 1000 8000 -- -- VCE = 4V, IC = 300mA, Ta = 25 V *The typical values are those measured under ambient temperature (Ta) of 25. There is no guarantee that these values are obtained under any conditions. SWITCHING CHARACTERISTICS (Unless otherwise noted, Ta = 25 Symbol ton toff Parameter Turn-on time Turn-off time Test conditions min -- -- CL = 15pFnote 1 Limits typ 30 930 Unit max -- -- TIMING DIAGRAM NOTE 1 TEST CIRCUIT INPUT VO INPUT RL Measured device 50% 50% OPEN OUTPUT PG 50 OUTPUT CL 50% on (1) Pulse generator (PG) characteristics: PRR = 1kHz, tw = 10s, tr = 6ns, tf = 6ns, ZO = 50 ,VI N= 0 to 8V (2) Input-output conditions : RL = 25, VO = 10V (3) Electrostatic capacity CL includes floating capacitance at connections and input capacitance at probes 2012.May 2 50% off M54522FP 8-UNIT 400mA DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE SINK TYPE TYPICAL CHARACTERISTICS Output Saturation Voltage Thermal Derating Factor Characteristics Collector Current Characteristics 500 2.0 IC(mA) 1.5 Collector current Power dissipation Pd(W) VI=4V 1.0 0.5 0 300 Ta=75 200 Ta=25 Ta=-20 100 0 0 25 50 75 Ambient temperature 100 0 Ta() 0.5 1.0 1.5 Collector saturation voltage Duty-Cycle- Collector current Characteristics 2.0 VCE(sat)(V) Duty-Cycle- Collector current Characteristics 500 500 Collector current IC (mA) Collector current IC (mA) 400 400 300 200 *The collector current values represent the current per circuit. *Repeated frequency 10Hz *The value in the circle represents the value of the simultaneously-operated circuit. *Ta = 25 100 0 0 20 40 60 400 300 200 100 0 80 100 *The collector current values represent the current per circuit. *Repeated frequency 10Hz *The value in the circle represents the value of the simultaneously-operated circuit. *Ta = 75 0 20 40 60 80 100 Duty cycle (%) Duty cycle (%) DC Amplification Factor Collector Current Characteristics Grounded Emitter Transfer Characteristics 7 5 400 VCE=4V VCE=4V Collector current IC (mA) DC amplification factor hFE 10 5 3 2 10 4 7 5 Ta=75 3 2 10 Ta=25 3 7 5 Ta=-20 3 300 Ta=75 Ta=25 Ta=-20 200 100 2 10 0 2 10 0 2 3 5 7 10 1 2 3 5 7 10 2 2 3 5 7 10 3 1 2 3 Input voltage VI (V) Collector current IC (mA) 2012.May 0 3 4 M54522FP 8-UNIT 400mA DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE SINK TYPE Clamping Diode Characteristics Input Characteristics 400 Forward bias current IF (mA) Input current II (mA) 2.0 1.5 Ta=-20 1.0 Ta=25 0.5 0 Ta=75 0 5 10 15 20 200 Ta=25 100 Ta=75 0 25 Input voltage VI (V) 2012.May 300 0 0.5 Ta=-20 1.0 1.5 Forward bias voltage VF (V) 4 2.0 M54522FP 8-UNIT 400mA DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE SINK TYPE PACKAGE OUTLINE 2012.May 5 M54522FP 8-UNIT 400mA DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE SINK TYPE Keep safety first in your circuit designs! Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials *These materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party. *Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any thirdparty's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. *All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including the Mitsubishi Semiconductor home page (http://www.MitsubishiElectric.com/). *When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. *Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. *The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part these materials. *If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. *Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for further details on these materials or the products contained therein. (c) 2012 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED. 2012.May 6